The 10 Male BNC Compression connectors for RG-59 that I ordered were less than stellar. I found no information of the Monoprice web site for installing these connectors. I used the typical stripping lengths (1/4 / 1/4) and attemted to install the connectors with no success. I used a small screwdriver to probe the depth that the coax inner insulator must reach to fully seat and found that I was not fully seating the cable. If you fully seat the coax into the connectors - and that takes a lot of force - then the connectors work. There are other brands on the market that are more expensive, but much easier to assemble. I will be ordering a box of 35 of those in the near future. Note that you can pull the back off the connector before compressing - be sure to keep track of the small plastic sleve inside the back of the connector. Slide the back of the connector and sleve onto your coax before stripping. You can then verify the coax is seated, reassemble the parts, and compress.

They were exactly how they were stated.I would recommend this product.

Works for me

.Good solid compression fitting. They worked for me. Now I'm just filling space so I can submit this.

Better quality than what i have purchased online before

Probably user error, but I found these to be more trouble than expected. Could not compress them properly and had to discard over 20% of them (i bought 30).

They are not working with RG6 cable. Cable is too thick. I purchased 16189 Viper Series HD-SDI RG6 BNC Cable, 100ft , had to cut one end to slide through small hole and now trying to find right connector, looks like its not available on Monoprice. Can't blame the connector though.

I should have listened to Chris H's review because the same exact thing happened to me.

I'm installing my security system so I bought a Klein compression tool. I've not had 1 connector yet that worked well. 3 have been bent so badly that I couldn't connect them to teh camera, one was defective and 2 have worked kind of but were still bent slightly in teh tool.

I'm buying other brand compression connectors in hopes they will actually work as expected.

Don't waste your money on these.

PROS: Cheap (price)

CONS: Cheap (quality)

Bought these for a job. But the interior ring at the back of the outside sprigged holder. Collapses easily. Went through a bunch of duds. Will likely not purchase again. ALSO: Theses will NOT work with the yellow compression tool(7050) they are too tall to fit in the tool.

PROS: Cheap Compression Connector

CONS: Spring Ring somtimes collapes when in tool.

These pieces truly are terrible. I wanted to give these a try because they were cheap. But this goes to show you truly get what you pay for. I tried to use them with 2 different compression tools, a Klein Tools compression tool, and a different name brand compression tool. Each fitting would not fit properly around the center post, and when you try crimping it, it would bend or break the inner ring. I tried an entire package and each time the same result. They wouldn't even fit in the other tool as they were too long.

PROS: None

Cheap

CONS: Cheap

Will not work with standard compression tools