Volume Pricing (Log In to see Member Pricing)
Titan Series Tilt Wall Mount for Extra Large 37~70in TVs up to 165 lbs, Black UL Certified (No Logo)
1-port 2-piece Inset Wall Plate with 4in Built-in Flexible High Speed HDMI Cable With Ethernet, White
Vertical Adjusting Ceiling Bracket for Projector w/ 300 - 400mm Extension (Max 22Lbs) - BLACK
This bracket allows you to mount your projector to a ceiling with an angle of up to 15 degrees.
This mount holds a projector from the top at a distance of 11.8" to 15.7" (300-400 mm) from the ceiling surface. It can accommodate projectors with a 3 or 4 mounting holes and a spacing diameter of 1.6" to 12.2" (40-310 mm) and a weight of up to 22 lbs (10 kg).
Provided the total diameter of the projectors wires/cables is less than the internal diameter of the vertical mounting bar they can be contained within the vertical bar for a neat and professional appearance. The projector can be tilted in both the horizontal and vertical axes, ±5 degrees horizontally and ±15 degrees vertically. Positioning screws allow precise control of the tilt angles, while locking screws keep it in the perfect position.
Included in the Box:
- 1x MPCN-D3040 Projector mount assembly
- 4x M6x25 tapping screw sets
- 4x 6x50 wood screw
- 2x M5x8 phillips screw
- 6x M5x10 phillips screw
- 4x M5x30 phillips screw
- 4x M4x30 phillips screw
- 4x M3x30 phillips screw
Projector not included!
- User's Manual (Nov 25, 2011)
Would not work. Clearly I misunderstood the specs, or they're wrong.
The "spread" for the mounting feet was about one inch short. I ended up making my own brackets to extend the brackets as I was in a pinch.
PROS: Well made
CONS: Hard to understand what the projector will actually mount to.
Assembly instructions are terrible.
There was also a bit of an issue with the projector I own having its mounting holes a few inches from the center of mass, which makes the mount want to tilt. Luckily, I was able to tighten the hardware enough that it would stop.
My last concern is that the adjustments are difficult to perform when this thing is hanging a foot from the ceiling and you cannot see the screws. Every adjustment introduces an unwanted adjustment along or around a different axis.
Anyway, after about 2 hours it's hanging securely and the projector is aligned. I would not NOT recommend it, but be prepared for some frustration.
PROS: Cheap as hell. Looks reasonable once installed. Cable management is useful.
CONS: Machining sloppy in places. Instructions are terrible. Adjustments are imprecise.
CONS: Everything! from the mount to customer service.
My apologies for the trouble you had with the mount working with your projector. I can get an RMA setup for you for a return, I would just need an order number to get the process started. Again my apologies for the inconvenience this has caused.
PROS: Looks great
CONS: Bad instructions
PROS: Easy to install. Exactly as described. Looks great..
CONS: Had to drill extra mounting holes in center of ceiling mount to make sure it hit the joist.
PROS: Great quality product. Easy installation. Good price.
PROS: Great mount at a great price. Pretty easy to put up
PROS: Good price
CONS: Instructions are laughable
Not a con, but would like to see a some fine tuning screws added to the design
CONS: needs passage for wire inside.