I am using this to power security cameras and it worked as expected

This is a good high output power supply. I use these all the time

Great power supply that delivers clean DC power. I have used this supply many times and never have had any regrets.

I purchased this to power up to four CCTV cameras. I have to say for the price, this is a great product. It could be an incredible product if it included a couple of items. First, how about rubber grommets for the knock-outs. While I don't expect a lot of movement in the wires after the installation, it just gives the unit a finished look. Also, instead to two screws to fasten the door, why not a couple of thumb screws? This would make for easy access.

The power output was right on the money according to my multi-meter.

If you want to make your life a little easier, purchase some of the DC power pigtail connectors (Monoprice P/N:6880 and 6881). I connected four to the box and hung them out of the nearest knock-out. Now when I connect my cameras, I don't have to cut and splice the power wire, in fact, using Monoprices ready made CCTV Siamese cables made the connection part a breeze.

Exactly what I needed for a QSee video surveillance system. I recommend this product to power BNC style connectors.

Excellent supply for any CCTV system. This is a great and affordable distribution component.

PROS: Individual power for each camera, structured, enclosed and organized.

CONS: None

I have a very DIY security camera setup with 12 volt transformers everywhere. This power supply allowed me to consolidate 4 cameras, which makes my setup a little cleaner.

PROS: Works Great

Product arrived promptly, no problems

PROS: Great product with no problems.

CONS: none

5/5

PROS: Works good as a add on to a small system


CONS: Do not need the large metal box ..Power supply should be mounted on a removable panel.

This is really minor, but still worth noting. The posts that camera pigtails screw into are in no way reinforced. The board it connects to is elevated on four corner-screws, which means that as you press in to tighten the screw, the whole board warps with it. Adding some sort of center support would eliminate this issue. Please note that it is still easy to install and does it's job, but the warpyness is profound, so it's worth noting.

PROS: *Does what it says
*Makes for a clean, protected install

CONS: *Flimsy