Arms did not extend far enough to mount on projector

Easy to install very sturdy a little tough to adjust. Very flexible for minor adjustments in tilt and swivel. Would have been better if the height adjustments were not screw in nuts but were quick release cotter pins or other types of adjustable pins.

This mount was very straight forward, easy to hang and hid all the wires.

The ceiling bracket works well and is not the least bit bulky.

Works great and price was great. Will buy from again

I give 3 stars for 3 reason: (1) for it's reasonable price and (2) extended length, (3) solid material.

Many reviews mentioned about tight connection between extensions. It's not any more, very easy to connect all 3 extensions. This makes the long extension floppy. I hoped that was a tight connection, "need hammer to push in" as many reviewed to make a solid connection. The top part to screw onto the ceiling is very badly designed. In North America, ceiling is most likely the wood stud. It can't be that wide. The large and floppy fixture is very ugly. The mount of the projector is too large for my SONY BRAVIA VPL-HW 3 hole projector. The mount to the extension is only one screw and looks scary. At the end, I had to use the old mount top (it happened that pushed in the extension very tightly) to make it look nicer. The result: floppy mount. It would probably OK if nothing vibrates and moves. I don't know yet, need to wait and see.

PROS: (1) price
(2) length
(3) steel extension

CONS: (1) floppy extension
(2) ugly and impractical ceiling mount part
(3) not flexible mounting piece on the projector
(4) one screw mount mechanism for the heavy projector

Great piece of equipment.

PROS: Easy to install, perfect length.

CONS: None

Thoroughly surprised by the sturdy construction of this product. Fits our needs perfectly.

PROS: Rugged Construction. Easy assembly - Very adjustable to fit any projector -

CONS: The only difference I really see between this and a high priced model would be micro adjustability. For our uses this unit is perfect.

I will be using this product again.

PROS: The order arrived quickly and was well packaged. The product was easy to install and the instructions were clear.

I am usually amazed at the quality of the product for the price it is sold for on here, but this product truly lived up to Cheap! there was a welding bead running down the inside of the main support pipe, which in its self is not a problem unless you have to slide another pipe (the extension) into it, than you don have the clearance. so have about 20 min of filing with a rat tail file we shaved down the bead so that the 2 poles fit together. when we went hang the projector we lifted it up (50 lbs) and held it there while we screwed in the thumb screw to attach the projector mount to the pole mount .. and as we release our support the thumb screw pulled right out! So we pulled down the projector and we split the pan tilt mount, and using a bolt and a nylock nut we replaced the thumb screw and bolted the unit together.. re hung the projector and all is good.. so you see it worked, but it took some effort.

PROS: inexpensive, seem like it will hold up

CONS: Pole are rolled steel and welded they are not tube steel and therefore don't slide into each other like they should.

single bolt to attach mount to the pole never held, and stripped immediately.