Stage Right by Monoprice 30-Watt 1x12 Guitar Stack Tube Amplifier with Celestion V30 and Reverb
Product # 611830
UPC # 889028119501
$639.99
*Affirm is not available for business or international orders
Qty:
Out of Stock
ETA: TBD
Note:
Due to limited supply, all products are sold on a first-come first-serve basis. Auto Notification does not guarantee either availability or price. All prices are subject to change without notice.
*Your information will only be used to notify you when this item becomes available.
Qty: 1
$639.99
Qty: 2-9
$614.39
Qty: 10-19
$601.59
Qty: 20-49
$588.79
Qty: 50+
$575.99
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 47 questions
Browse 47 questions
and 53 answers
If using the output jack to hook two of the 12" V30 together would the impedance be 16 (series) or 4 (parallel)?
New User U
on Nov 8, 2019
Stage Right by Monoprice 30-Watt 1x12 Guitar Stack Tube Amplifier with Celestion V30 and Reverb
Stage Right by Monoprice 1x12 Guitar Speaker Cabinet with Celestion Vintage 30
BEST ANSWER: My Stage Right 30 watt head has a switch to set at either 4 ohms, or 8 ohms. So if you are wired in parallel, you can just switch to 4 ohms.
- Reply
- Inaccurate
- RONALD S on Aug 9, 2021
- Purchased on Jul 20, 2021
BEST ANSWER: My Stage Right 30 watt head has a switch to set at either 4 ohms, or 8 ohms. So if you are wired in parallel, you can just switch to 4 ohms.
- Reply
- Inaccurate
- RONALD S on Aug 9, 2021
- Purchased on Jul 20, 2021
Amp specs state amp is rated for 8-16 ohm loads. If jacks were parallel, (2) 8ohm Celestion Vin30's would present a 4 ohm load, which would blow the amp. I'm sure the designer/manufacturer knew that, and provided a series wiring configuration..... so you can buy 2 of their cabs without fear!
- Reply
- Inaccurate
- New User U on Nov 30, 2019
SO Which is it . First answer states its not 4 ohm. Big D states it is? What is the load when 2 are used with the output jack?
- Reply
- Inaccurate
- New User U on Jul 24, 2020
Vote for the best answer above!
How do you plug in two cabinets?
A shopper
on Sep 16, 2021
BEST ANSWER: The 2 cabinets would have to be 8, or 16 ohm cabinets, and you would need to know what the resistance, (ohms rating) on the cabinets is, before plugging them in. If using 2 8 ohm cabinets, make sure the"0hm" switch on the back of the amp is set to 4 ohms, and plug each cabinet into one of the 2 output jacks. If the cabinets are 16 ohm rating, the "ohm" switch should be on 8 ohms, and both can be plugged in, one in each jack. In other words, 2 (8) ohm cabs presents a 4 ohm load to the amp, using the 2 output jacks, on the amp, (2) 16 ohm cabs present an 8 ohm total load, using the 2 output jacks...on the amp, hope this all helps you.
- Reply
- Inaccurate
- Louis A on Sep 16, 2021
- Purchased on Sep 5, 2021
BEST ANSWER: The 2 cabinets would have to be 8, or 16 ohm cabinets, and you would need to know what the resistance, (ohms rating) on the cabinets is, before plugging them in. If using 2 8 ohm cabinets, make sure the"0hm" switch on the back of the amp is set to 4 ohms, and plug each cabinet into one of the 2 output jacks. If the cabinets are 16 ohm rating, the "ohm" switch should be on 8 ohms, and both can be plugged in, one in each jack. In other words, 2 (8) ohm cabs presents a 4 ohm load to the amp, using the 2 output jacks, on the amp, (2) 16 ohm cabs present an 8 ohm total load, using the 2 output jacks...on the amp, hope this all helps you.
- Reply
- Inaccurate
- Louis A on Sep 16, 2021
- Purchased on Sep 5, 2021
The cab has an output jack to connect to a second cab. You would need to change the impedance setting/switch on the back of the amp to account for the additional amp since the 2 cabs would then be in a parallel connection. I believe there are several questions and answers in this section that dig into more detail about what those impedance settings should be.
- Reply
- Inaccurate
- Jennifer L on Sep 16, 2021
- Purchased on Jun 11, 2021
Go to 'Google and type in 1/4" male to double 1/4" jack female connector. There, you will find the connector you can use. Make sure to check the impedance to make sure it's alright on the amp. Good luck. I'm going to do the same thing
- Reply
- Inaccurate
- Stanley T on Sep 23, 2021
- Purchased on Apr 14, 2021
There are other ways of going about this, different than what I wrote in the post above, but, the info I've given you is the most straight forward, approach to safely attach your 2 cabs.
- Reply
- Inaccurate
- Louis A on Sep 16, 2021
- Purchased on Sep 5, 2021
Vote for the best answer above!
If using the output jack to hook two cabs together would the impedance be 16 (series) or 4 (parallel)?
New User U
on Nov 8, 2019
Stage Right by Monoprice 30-Watt 1x12 Guitar Stack Tube Amplifier with Celestion V30 and Reverb
Stage Right by Monoprice 1x12 Guitar Speaker Cabinet with Celestion Vintage 30
BEST ANSWER: it depends on the total impedance of the other speaker. Add the two impedances together and divide by 2
- Reply
- Inaccurate
- Billy on Aug 25, 2020
- Purchased on Jul 14, 2020
BEST ANSWER: it depends on the total impedance of the other speaker. Add the two impedances together and divide by 2
- Reply
- Inaccurate
- Billy on Aug 25, 2020
- Purchased on Jul 14, 2020
Vote for the best answer above!
Your other tube amps were based on designs from an English company associated with tommy Iommi. Is this one as well?
laurence p
on Nov 17, 2019
Looks to be very similar. Just more power and channel switching.
- Reply
- Inaccurate
- Big D on Nov 19, 2019
Tony also used various speakers and cabinets with Laney, Marshalls and some other custom amps for recording. There is quite a bit of info on the internet, just do some searching.
- Reply
- Inaccurate
- New User U on Feb 23, 2020
Vote for the best answer above!
I noticed a previous question about running two of these 8ohm cabs in parallel, which was deemed possible. Can these amps safely handle a 4 ohm load?
Joe M
on Feb 17, 2020
BEST ANSWER: If you use two 8 ohm cabinets utilizing the two output/speaker jacks, put the switch in the 4 ohm position as they will be running in parallel thus a 4 ohm load. Even if the second cabinet might have a 16 ohm speaker, still put the switch in the 4 ohm position as indicated by the line drawn between the switch and the output jack. The impedance in this case will be less than 8 ohms (more like about 6 ohms).
Also, even if you only use one of the output jacks from the amp to one speaker and then connect that speaker, put the switch in the 4 ohm position as the load to the amp will be less than 8 ohms.
The only caveat to that is if you are running with two 16ohm cabinets, you would set the switch to 8 ohms as that is what the load impedance will be.
Also, even if you only use one of the output jacks from the amp to one speaker and then connect that speaker, put the switch in the 4 ohm position as the load to the amp will be less than 8 ohms.
The only caveat to that is if you are running with two 16ohm cabinets, you would set the switch to 8 ohms as that is what the load impedance will be.
- Reply
- Inaccurate
- Jim W on Mar 6, 2020
BEST ANSWER: If you use two 8 ohm cabinets utilizing the two output/speaker jacks, put the switch in the 4 ohm position as they will be running in parallel thus a 4 ohm load. Even if the second cabinet might have a 16 ohm speaker, still put the switch in the 4 ohm position as indicated by the line drawn between the switch and the output jack. The impedance in this case will be less than 8 ohms (more like about 6 ohms).
Also, even if you only use one of the output jacks from the amp to one speaker and then connect that speaker, put the switch in the 4 ohm position as the load to the amp will be less than 8 ohms.
The only caveat to that is if you are running with two 16ohm cabinets, you would set the switch to 8 ohms as that is what the load impedance will be.
Also, even if you only use one of the output jacks from the amp to one speaker and then connect that speaker, put the switch in the 4 ohm position as the load to the amp will be less than 8 ohms.
The only caveat to that is if you are running with two 16ohm cabinets, you would set the switch to 8 ohms as that is what the load impedance will be.
- Reply
- Inaccurate
- Jim W on Mar 6, 2020
I just received this amp and cabinet combo and a second cabinet I bought separately, The Back of the amp head has 2 speaker connections. 1 is 8 ohms and the other is switchable for 8-16 ohms. The Speaker cabinets are 8 ohms each. I have emailed tech support to find out if you can plug 1 cabinet into the 8 ohm output and the other in the 8-16 ohm output without burning out the amp head or can we really run the 2nd cabinet at all. I will update this when I find out the answer I hope this helps!!!
- Reply
- Inaccurate
- New User U on Feb 25, 2020
- Purchased on Feb 20, 2020
Yes, Monoprice has a better picture of the back of the amp on the listing for the cabinet, 611899. You can see a switch by the speaker outs for 8 or 4 ohm total load. Perhaps a better pic of the amp would be better suited on the listing that includes the amp??
- Reply
- Inaccurate
- Big D on Feb 23, 2020
Vote for the best answer above!
Does this amp have an effects loop?
A shopper
on May 12, 2020
Yes it does and may I say it is a great sounding amp, so of course I had to buy 2 cabs. Hope this answers your question.
- Reply
- Inaccurate
- John V on May 12, 2020
- Purchased on Apr 23, 2020
Yes, and the out port can be used as a line out.
- Reply
- Inaccurate
- New User U on May 12, 2020
- Purchased on Apr 12, 2020
Vote for the best answer above!
Hi i just bought a 212 cabient what do i put the ohms setting at on the monoprice 30 watt head the cab is 8 ohms? thanks
New User U
on Jul 14, 2020
If your 8 ohm speakers are wired o in series they would still be 8 ohms.. If you were to wire them
parallel the ohmage is reduced to 4 ohms. I would recommend that you set your amp foro 4 ohm. DO NOT run your amp at a higher ohmage than your speaker cabinet.. You can BOW YOUR AMP!
than your cabinet. You can you w your amp! Take your time an
d make sure that you wire your day next
parallel the ohmage is reduced to 4 ohms. I would recommend that you set your amp foro 4 ohm. DO NOT run your amp at a higher ohmage than your speaker cabinet.. You can BOW YOUR AMP!
than your cabinet. You can you w your amp! Take your time an
d make sure that you wire your day next
- Reply
- Inaccurate
- Paul S on Jul 15, 2020
- Purchased on Jul 1, 2020
2-8 ohm speaker cabs will be 4 ohms at the amp. If you are using both the 1x12 cab(8 ohms) & 2x12 cab(8 ohms) = 4 ohms amp
8input.
8input.
- Reply
- Inaccurate
- New User U on Jul 15, 2020
- Purchased on Apr 12, 2020
Vote for the best answer above!
Will it be possible to buy a second speaker cabinet with the Celestion V30 12" to run 2 cabinet stack? Looks like one of the pics shows a ghost image of a second cab in such a configuration.
New User U
on Nov 8, 2019
BEST ANSWER: Yes, this is possible, and here is the extension cabinet: https://www.monoprice.com/product?p_id=611899#QuestionsandAnswers
- Reply
- Inaccurate
- New User U Staff on Nov 8, 2019
BEST ANSWER: Yes, this is possible, and here is the extension cabinet: https://www.monoprice.com/product?p_id=611899#QuestionsandAnswers
- Reply
- Inaccurate
- New User U Staff on Nov 8, 2019
Yes, The amp itself has 2 speaker outputs for parallel, and the cabinet has an output to run in series
- Reply
- Inaccurate
- New User U on May 12, 2020
- Purchased on May 1, 2020
Vote for the best answer above!
What amp would this be similar to? Can the head be bought separately?
A shopper
on Nov 12, 2019
BEST ANSWER: The head can't be purchased on its own at the moment; however, we are working on making that available soon.
We will post some videos to show how the amp sounds soon.
We will post some videos to show how the amp sounds soon.
- Reply
- Inaccurate
- New User U Staff on Nov 18, 2019
BEST ANSWER: The head can't be purchased on its own at the moment; however, we are working on making that available soon.
We will post some videos to show how the amp sounds soon.
We will post some videos to show how the amp sounds soon.
- Reply
- Inaccurate
- New User U Staff on Nov 18, 2019
Yes you can buy separately. Regarding your comment about what amp could be considered similar to this tube guitar amp: Go to YouTube and watch one or two of the commentary and analyzing videos for this amp. It will be very helpful. The commentator does a great job of matching and comparing this amp to other guitar amps by the most popular amp manufacturers
- Reply
- Inaccurate
- Stanley T on Jul 27, 2021
- Purchased on Apr 14, 2021
Vote for the best answer above!
Vote for the best answer above!
Is the rectifier solid state or tube driven?
New User U
on Nov 28, 2019
BEST ANSWER: To the best of my knowledge this is an 'all tube' amplifier. Go to YouTube and watch a video or 2 of experts critiquing this amp. The ones I viewed spoke mostly positive about this little jewel
- Reply
- Inaccurate
- Stanley T on Jul 27, 2021
- Purchased on Apr 14, 2021
BEST ANSWER: To the best of my knowledge this is an 'all tube' amplifier. Go to YouTube and watch a video or 2 of experts critiquing this amp. The ones I viewed spoke mostly positive about this little jewel
- Reply
- Inaccurate
- Stanley T on Jul 27, 2021
- Purchased on Apr 14, 2021
Vote for the best answer above!
The description says it comes with a TRS cable as the speaker cable...is this correct? Most speaker cab cables are TS, not TRS. I plan on using an attenuator for home use and I don't think it would work with a TRS cable. The footswitch needs to be TRS, but the speaker cable should be a TS cable.
RONALD S
on Jul 21, 2021
BEST ANSWER: I cant remember I've set it aside, because it was 10ft long. I bought a shorter cable. Its a great amp just don't need 10ft speaker cable.
- Reply
- Inaccurate
- norman w on Jul 21, 2021
- Purchased on Nov 9, 2020
BEST ANSWER: I cant remember I've set it aside, because it was 10ft long. I bought a shorter cable. Its a great amp just don't need 10ft speaker cable.
- Reply
- Inaccurate
- norman w on Jul 21, 2021
- Purchased on Nov 9, 2020
Speaker cab is TS, only one black ring. Footswitch has 2 rings.
- Reply
- Inaccurate
- Ed P on Jul 26, 2021
- Purchased on Jun 18, 2021
Vote for the best answer above!
When using the stage right 30 with stock speaker cab should the 8 ohm red switch with double lines be up or down? It came in the up position so I am uncertain and there is nothing pertaining to the manual on this.
A shopper
on Aug 6, 2021
BEST ANSWER: When driving 1 speaker cabinet the red switch should be in the down, 8 ohm position.
- Reply
- Inaccurate
- John H on Aug 11, 2021
- Purchased on May 13, 2021
BEST ANSWER: When driving 1 speaker cabinet the red switch should be in the down, 8 ohm position.
- Reply
- Inaccurate
- John H on Aug 11, 2021
- Purchased on May 13, 2021
It should be down for 8 ohm speaker
- Reply
- Inaccurate
- William H on Aug 11, 2021
- Purchased on Jul 20, 2021
Vote for the best answer above!
Is this amplifier the same design as your 15 watt combo amp except you've doubled the amplifier output? I see one amp is 2 EL84s and the other is 4 EL84s, I'm just wondering if these amps have the same tonal characteristics or are they different? Also, is the reverb a spring reverb?
dan r
on Dec 5, 2019
BEST ANSWER: Looks like the same topology as the 611815 with 2x tubes for 2x power. No tank for reverb, must be digital.
- Reply
- Inaccurate
- Big D on Feb 15, 2020
BEST ANSWER: Looks like the same topology as the 611815 with 2x tubes for 2x power. No tank for reverb, must be digital.
- Reply
- Inaccurate
- Big D on Feb 15, 2020
Vote for the best answer above!
Does this have a "1-watt" or similar mode to the smaller 15W version? Really looking for a good tube practice amp with switchable channels.
Amir D
on Dec 18, 2019
BEST ANSWER: Thank you for your question.
This would not have switchable wattage like #611815 would.
Sorry about any inconvenience this may have caused.
This would not have switchable wattage like #611815 would.
Sorry about any inconvenience this may have caused.
- Reply
- Inaccurate
- Tyler C Staff on Dec 18, 2019
BEST ANSWER: Thank you for your question.
This would not have switchable wattage like #611815 would.
Sorry about any inconvenience this may have caused.
This would not have switchable wattage like #611815 would.
Sorry about any inconvenience this may have caused.
- Reply
- Inaccurate
- Tyler C Staff on Dec 18, 2019
Vote for the best answer above!
Vote for the best answer above!
Hello, Will this amp operate with a quartet of 6V6s? thx
New User U
on Feb 14, 2020
BEST ANSWER: No, not without some modifications. 6V6s are octal (8-pin) tubes and have different pinouts from EL84s, which are nonal (9-pin) tubes.
- Reply
- Inaccurate
- Christopher M on Apr 21, 2020
BEST ANSWER: No, not without some modifications. 6V6s are octal (8-pin) tubes and have different pinouts from EL84s, which are nonal (9-pin) tubes.
- Reply
- Inaccurate
- Christopher M on Apr 21, 2020
Vote for the best answer above!
Is there an effects loop?
A shopper
on Feb 15, 2020
BEST ANSWER: If you look at the back picture you can see the FX loop.
- Reply
- Inaccurate
- Big D on Feb 15, 2020
BEST ANSWER: If you look at the back picture you can see the FX loop.
- Reply
- Inaccurate
- Big D on Feb 15, 2020
Vote for the best answer above!
Is it spring or digital reverb?
A shopper
on Mar 29, 2020
BEST ANSWER: You should look at the previous Q&A. Question was asked answer was given.
- Reply
- Inaccurate
- Big D on Jun 24, 2020
BEST ANSWER: You should look at the previous Q&A. Question was asked answer was given.
- Reply
- Inaccurate
- Big D on Jun 24, 2020
Vote for the best answer above!
Is there a chance to get it shipped to UE?
A shopper
on Apr 3, 2020
BEST ANSWER: Hello,
You can find a list of countries we ship to here: https://monopricesupport.kayako.com/article/27-what-countries-does-monoprice-currently-ship-to.
You can find a list of countries we ship to here: https://monopricesupport.kayako.com/article/27-what-countries-does-monoprice-currently-ship-to.
- Reply
- Inaccurate
- Tyler C Staff on Apr 3, 2020
BEST ANSWER: Hello,
You can find a list of countries we ship to here: https://monopricesupport.kayako.com/article/27-what-countries-does-monoprice-currently-ship-to.
You can find a list of countries we ship to here: https://monopricesupport.kayako.com/article/27-what-countries-does-monoprice-currently-ship-to.
- Reply
- Inaccurate
- Tyler C Staff on Apr 3, 2020
Vote for the best answer above!
Does this have a headphone jack for quiet practicing?
A shopper
on May 16, 2020
BEST ANSWER: No headphone jack, just turn it down, mic it and use a headphone amp.
- Reply
- Inaccurate
- Ronald F on Jun 14, 2020
- Purchased on May 13, 2020
BEST ANSWER: No headphone jack, just turn it down, mic it and use a headphone amp.
- Reply
- Inaccurate
- Ronald F on Jun 14, 2020
- Purchased on May 13, 2020
Vote for the best answer above!
Does it take 220/240 volt power?
A shopper
on May 19, 2020
Vote for the best answer above!
where are these amps made? Monoprice Stage Right Amps
A shopper
on May 21, 2020
Vote for the best answer above!
Vote for the best answer above!
What is the shipping weight for the "Stage Right by Monoprice 30-Watt 1x12 Guitar Stack Tube Amplifier with Celestion V30 and Reverb"? (I'd be ordering to US address & flying home with it)
New User U
on Feb 3, 2022
BEST ANSWER: When I ordered mine last year, the invoice stated 72.75 lbs total weight.
- Reply
- Inaccurate
- Jennifer L on Feb 3, 2022
- Purchased on Jun 11, 2021
BEST ANSWER: When I ordered mine last year, the invoice stated 72.75 lbs total weight.
- Reply
- Inaccurate
- Jennifer L on Feb 3, 2022
- Purchased on Jun 11, 2021
Vote for the best answer above!
I have the 30 watt head and 1x12" can. What happens when I hook another 1x12" speaker directly into the back of the first original speaker? I'm asking because I don't know if I will build a another 1x12" cab to add or just build a new 2x12" can all in one.!!! Also will this amp run 4 Ohm load. It has 8-16 in one color and a 4 Ohm position in a different color. Thanks in advance.
New User U
on Jun 26, 2022
BEST ANSWER: Yes, there is a switch in back, just flip it to 4 ohms instead of 8 ohms. It's generally OK to run an amp's output at less than the speaker load. NEVER Run it at more than the load, it would result in a fried transformer!
- Reply(1)
- Inaccurate
- RONALD S on Jun 27, 2022
- Purchased on Jul 20, 2021
Doesn't a lower Ohm draw higher current?
- Reply
- New User U on Jun 27, 2022
BEST ANSWER: Yes, there is a switch in back, just flip it to 4 ohms instead of 8 ohms. It's generally OK to run an amp's output at less than the speaker load. NEVER Run it at more than the load, it would result in a fried transformer!
- Reply(1)
- Inaccurate
- RONALD S on Jun 27, 2022
- Purchased on Jul 20, 2021
Doesn't a lower Ohm draw higher current?
- Reply
- New User U on Jun 27, 2022
Vote for the best answer above!
What is the cabinet exterior made out of?
A shopper
on Jan 25, 2023
BEST ANSWER: Thank you for your question. The cabinet should be composite wood and covered by vinyl.
- Reply
- Inaccurate
- Carlos R Staff on Aug 16, 2023
BEST ANSWER: Thank you for your question. The cabinet should be composite wood and covered by vinyl.
- Reply
- Inaccurate
- Carlos R Staff on Aug 16, 2023
Vote for the best answer above!
There are elements of this amp that are vaguely suggestive of the Vox AC30. Is there an established amp that this 30 watt EL84 head emulates in terms of tone and sonic signature?
A shopper
on Mar 16, 2023
BEST ANSWER: It’s a laney. I forget which model and yes it sounds like an ac30 for the most part without the weight. I use mine professionally and love it.
- Reply
- Inaccurate
- Kenneth W on Mar 16, 2023
- Purchased on Jan 16, 2023
BEST ANSWER: It’s a laney. I forget which model and yes it sounds like an ac30 for the most part without the weight. I use mine professionally and love it.
- Reply
- Inaccurate
- Kenneth W on Mar 16, 2023
- Purchased on Jan 16, 2023
Vote for the best answer above!
There is a 4ohm spot on the speaker impedance switch. Does it work? I've heard several people say it's only 8-16ohm. I have a extra 8ohm speaker and would really like to build a extra 1x12 cab or a vertical 2x12 cab. Thanks In advance.
New User U
on Jul 8, 2023
BEST ANSWER: The 4 ohm switch works fine for me. It should be fine for a two cab setup.
My suggestion for a 2x12 would be to wire it in series, for 16 ohms, then you could use it under any circumstances as long as the speakers are of the correct wattage.
My suggestion for a 2x12 would be to wire it in series, for 16 ohms, then you could use it under any circumstances as long as the speakers are of the correct wattage.
- Reply
- Inaccurate
- Bill D on Jul 12, 2023
- Purchased on Mar 17, 2023
BEST ANSWER: The 4 ohm switch works fine for me. It should be fine for a two cab setup.
My suggestion for a 2x12 would be to wire it in series, for 16 ohms, then you could use it under any circumstances as long as the speakers are of the correct wattage.
My suggestion for a 2x12 would be to wire it in series, for 16 ohms, then you could use it under any circumstances as long as the speakers are of the correct wattage.
- Reply
- Inaccurate
- Bill D on Jul 12, 2023
- Purchased on Mar 17, 2023
Vote for the best answer above!
Is the speaker cabinet made of actual wood (like plywood or solid pine) or is it made out of a composite material like MDF? What material is it made of. Thanks in advance.
A shopper
on Oct 2, 2023
BEST ANSWER: I'm not sure, but it's pretty solid and doesn't rattle at volume.
This amp is a JMP circuit. Start with Mids and Treble at 10 and Bass at 0, and go from there. It's a phenomenal amp, just an incredible deal. Even if the V30 isn't your thing, replace it with something you like. I went with a WGS Reaper HP. It's still a fantastic bargain for a great head and cab.
This amp is a JMP circuit. Start with Mids and Treble at 10 and Bass at 0, and go from there. It's a phenomenal amp, just an incredible deal. Even if the V30 isn't your thing, replace it with something you like. I went with a WGS Reaper HP. It's still a fantastic bargain for a great head and cab.
- Reply
- Inaccurate
- Bill D on Oct 4, 2023
- Purchased on Mar 17, 2023
BEST ANSWER: I'm not sure, but it's pretty solid and doesn't rattle at volume.
This amp is a JMP circuit. Start with Mids and Treble at 10 and Bass at 0, and go from there. It's a phenomenal amp, just an incredible deal. Even if the V30 isn't your thing, replace it with something you like. I went with a WGS Reaper HP. It's still a fantastic bargain for a great head and cab.
This amp is a JMP circuit. Start with Mids and Treble at 10 and Bass at 0, and go from there. It's a phenomenal amp, just an incredible deal. Even if the V30 isn't your thing, replace it with something you like. I went with a WGS Reaper HP. It's still a fantastic bargain for a great head and cab.
- Reply
- Inaccurate
- Bill D on Oct 4, 2023
- Purchased on Mar 17, 2023
Vote for the best answer above!
Questions For Similar Products
Reviews
4.8 / 5.0
42 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
35
4
3
0
0
Rated 5 out of 5
Love it!
I love this amplifier. It sounds great and is the perfect size. I would highly recommend.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Wake the neighbors!
30 watt tube head, great cab with 12 inch Celestion Vintage 30 speaker. What's not to like? I'm a bedroom rocker and this bad boy is way overkill. My only niggle is the lack of a master volume control. I put a volume pedal in the fx loop and this does make it much more managable. The stack is great and I got it at half price sale. Just a stupid crazy value that I couldn't pass up. Sounds great, plenty options for sculpting your tone. It will blow your socks off.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Response from Monoprice
Thanks for sharing your positive review of the Amplifier! I'm sure other guitarists will appreciate your insights. I highly recommend this amplifier to anyone looking for a versatile and affordable tube amp.
October 30, 2023
Eli S
Rated 5 out of 5
tube heaven
just giged with it outside, stage volume on three perfect ,used 2 cabs and pedalboard love it
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Terrific value for a tube amp
Pleasantly surprised at how great this amp is. Solid build, awesome sound, rivals amps costing much much more. JnJ tubes in it too
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
the best
great got a great price 50 % off!!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
It's a JMP circuit
This is a fantastic amp at an incredible price. It's a JMP circuit. Start with Mids and Treble at 10, Bass at 0 and go from there.
I replaced the V30 with a WGS Reaper HP, the V30 has specific applications and open-backed cabs at bedroom levels aren't one of them. Cutting through a loud band mix and recording, perfect.
It is just a great package, and inexpensive enough to buy a second if you need a backup.
I replaced the V30 with a WGS Reaper HP, the V30 has specific applications and open-backed cabs at bedroom levels aren't one of them. Cutting through a loud band mix and recording, perfect.
It is just a great package, and inexpensive enough to buy a second if you need a backup.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Great tube tones
I own the 5 watt, 15 watt and now the 30 watt Stage Right tube amps. Love them all. No better amps for the money.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
killer deal
Nice amp Nice sound. awesome price when on sale
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Looked good but didn't work
Only worked for 30 seconds then loses all sound. Was told I can exchange it but won't have more in stock until june,got on sale was told I would get refund and buy it again. If I decide to buy again maybe it will work. I assumed they had shops to take it for warranty work but they dont!
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Rated 5 out of 5
Monoprice 30 watt head with 112 speaker cab
This is probably one of the best amps I've ever played through!! Tone wise, somewhere between a Marshall and a vox ac130. Plenty of power and clean headroom. It handles pedals really well. You can't beat it for the price!!! The reverb is a bit weak and the knobs are a little cheap and as some people stated it's hard to read the front panel all and all it is a great amp!!!
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Reviews for Similar Products