Stage Right by Monoprice SRD212 1200W 12-inch Powered Speaker with Class D Amp, DSP, and Bluetooth Streaming
Product # 600014
UPC # 889028182130
$199.99
*Affirm is not available for business or international orders
Qty:
Out of Stock
ETA: TBD
Note:
Due to limited supply, all products are sold on a first-come first-serve basis. Auto Notification does not guarantee either availability or price. All prices are subject to change without notice.
*Your information will only be used to notify you when this item becomes available.
Qty: 1
$199.99
Qty: 2-9
$179.99
Qty: 10-19
$168.90
Qty: 20-49
$165.59
Qty: 50+
$165.59
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 36 questions
Browse 36 questions
and 55 answers
Can you run 2 different instruments through this speaker or do you need a mixer?
New User U
on Jun 21, 2022
BEST ANSWER: You could run one instrument through input "A" and another through input "B", however to get the best sound it would be better to run your inputs through a mixer (where you have more control over the sound) then into the Powered Speaker.
- Reply
- Inaccurate
- L Lynn L on Jun 22, 2022
- Purchased on Aug 14, 2021
BEST ANSWER: You could run one instrument through input "A" and another through input "B", however to get the best sound it would be better to run your inputs through a mixer (where you have more control over the sound) then into the Powered Speaker.
- Reply
- Inaccurate
- L Lynn L on Jun 22, 2022
- Purchased on Aug 14, 2021
It has two inputs with their own level controls, so you should be able to do what you are trying without a separate mixer. Of course you won't get other things like manual equalization, effects, etc., like you can with a dedicated mixer.
- Reply
- Inaccurate
- Robert G on Jun 21, 2022
- Purchased on Nov 11, 2021
You can run 2 instruments through one speaker, but you can't daisychain a 2nd speaker if you do this. Also, this speaker does not have phantom power. So any mics that need power won't get power.
- Reply
- Inaccurate
- Robb L on Jun 21, 2022
- Purchased on Nov 18, 2021
There are 2 inputs and controls to switch the second one to a line input so yes you can run two different instruments (you may need a DI box for channel 1 if you're going direct in)
- Reply
- Inaccurate
- Jarad S on Jun 27, 2022
- Purchased on Jun 3, 2022
You can put in either 2 instruments or one mic and one instrument, each with its own adjustable level. There is no 3rd knob for total output, but so far it hasn’t mattered at all.
- Reply
- Inaccurate
- PETER N on Jun 21, 2022
- Purchased on Feb 27, 2022
I believe you can. There are inputs for xlr, 1/4inch, and rca.
- Reply
- Inaccurate
- Richard J on Jun 27, 2022
- Purchased on Mar 30, 2022
Vote for the best answer above!
Can you pair with blue tooth???
A shopper
on May 5, 2024
BEST ANSWER: Hi, this device can be paired to a Bluetooth streaming device.
- Reply
- Inaccurate
- Jhomar R Staff on May 7, 2024
BEST ANSWER: Hi, this device can be paired to a Bluetooth streaming device.
- Reply
- Inaccurate
- Jhomar R Staff on May 7, 2024
SRD212 12" POWERED SPEAKER
with Class D amp, DSP, and Bluetooth® streaming
with Class D amp, DSP, and Bluetooth® streaming
- Reply
- Inaccurate
- Michael S on May 5, 2024
- Purchased on Nov 24, 2023
Yes, I play music on my phone and play along on my electronic drum set
- Reply
- Inaccurate
- Tauran I on May 6, 2024
- Purchased on Feb 12, 2024
Yes. This speaker has Bluetooth capability option on the back display.
- Reply
- Inaccurate
- Subrina K on May 5, 2024
- Purchased on Oct 18, 2023
Yes, you can pair your phones with bluetooth
- Reply
- Inaccurate
- Anbarasan V on May 5, 2024
- Purchased on Feb 15, 2024
Vote for the best answer above!
Can you use these for guitar ?
A shopper
on Feb 9, 2022
BEST ANSWER: Absolutely!!! Using one with a pedal rig. I recommend a Xotic EP booster on the end of your chain. Really shows what the speaker is capeable of!
- Reply
- Inaccurate
- Mike L on Dec 2, 2022
- Purchased on Nov 11, 2022
BEST ANSWER: Absolutely!!! Using one with a pedal rig. I recommend a Xotic EP booster on the end of your chain. Really shows what the speaker is capeable of!
- Reply
- Inaccurate
- Mike L on Dec 2, 2022
- Purchased on Nov 11, 2022
Monoprice not only stands behind every product including the Stage Right powered speaker with Class D amplifier built in; they also sell the product with a genuine 1 year replacement warranty; just contact monoprice support in one's user manual and they will assist you in remediating any issues/concerns on your purchased Stage Right product.
- Reply
- Inaccurate
- daniel58 on Apr 20, 2022
You can, but I bought 2 like 6 months ago and one has already died on me. It is not powering on.
- Reply
- Inaccurate
- Timothy T on Feb 10, 2022
- Purchased on Jun 2, 2021
The item has a full one year Stage Right product warranty offered directly by Monoprice.
- Reply
- Inaccurate
- daniel58 on Apr 20, 2022
Vote for the best answer above!
Can a standard XLR cable be used in either Input A or B, or will those inputs only take a 1/4" TRS cable?
A shopper
on Jul 18, 2024
BEST ANSWER: Hi, you can use regular XLR cable or a 1/4 connection. Thank you.
- Reply
- Inaccurate
- Jhomar R Staff on Jul 19, 2024
BEST ANSWER: Hi, you can use regular XLR cable or a 1/4 connection. Thank you.
- Reply
- Inaccurate
- Jhomar R Staff on Jul 19, 2024
Both inputs A and B will take Combo XLR jacks that will also allow 1/4 jacks to be used for input.
- Reply
- Inaccurate
- Subrina K on Jul 18, 2024
- Purchased on Oct 18, 2023
These speakers have the combination jacks which accept xlr and 1/4" connections.
- Reply
- Inaccurate
- Ronald S on Jul 18, 2024
- Purchased on Apr 3, 2024
Yes, you can use a standard XLR cable for either input.
- Reply
- Inaccurate
- Glazer on Jul 18, 2024
- Purchased on Apr 3, 2024
Vote for the best answer above!
Can I run a non-powered speaker off the "mix out" output? Or does it have to be another powered speaker? Thanks!
A shopper
on Jan 7, 2025
BEST ANSWER: Hi, thank you for your question.You would need to connect a power speaker to the mix out port.
- Reply
- Inaccurate
- Jhomar R Staff on Jan 7, 2025
BEST ANSWER: Hi, thank you for your question.You would need to connect a power speaker to the mix out port.
- Reply
- Inaccurate
- Jhomar R Staff on Jan 7, 2025
I purchased 2 speakers because the speaker power in one unit can only power that speaker. The mix out is a total mixed line out of the 2 lines. I Believe/ not certain, when using the DSP will take up one of the in lines.
The Mix Line out needs to go to a unit that has a Line In and a powered speaker system. I use a mixing sound board (with NO power for speakers) with lines out, for my speaker input and daisy chain the powered speakers.
If you add an input on the second speaker it will not play thru to the 1st speaker. Hence, use the sound board mixer. Hope this wasn-'t too confusing
The Mix Line out needs to go to a unit that has a Line In and a powered speaker system. I use a mixing sound board (with NO power for speakers) with lines out, for my speaker input and daisy chain the powered speakers.
If you add an input on the second speaker it will not play thru to the 1st speaker. Hence, use the sound board mixer. Hope this wasn-'t too confusing
- Reply
- Inaccurate
- Domenic P on Jan 8, 2025
- Purchased on Feb 13, 2024
You can....but that other speaker would have to be amplified by another source.
- Reply
- Inaccurate
- Tauran I on Jan 7, 2025
- Purchased on Feb 12, 2024
The output is line level, so you'd need powered speaker.
- Reply
- Inaccurate
- Matt on Jan 8, 2025
- Purchased on Dec 4, 2024
Vote for the best answer above!
Wondering what DSP setting would be best when using these as floor monitors with a live band?
A shopper
on Feb 27, 2022
BEST ANSWER: To use as monitors in a band situation, use "normal" setting. Do not use any of the DSP modes.
- Reply
- Inaccurate
- Hien V on Oct 19, 2022
BEST ANSWER: To use as monitors in a band situation, use "normal" setting. Do not use any of the DSP modes.
- Reply
- Inaccurate
- Hien V on Oct 19, 2022
the live setting is great I use it mostly with karaoke
- Reply
- Inaccurate
- Ron S on Feb 28, 2022
- Purchased on Nov 4, 2021
Vote for the best answer above!
Is the SRD212 power supply inside a switching supply, or a 60Hz transformer?
A shopper
on Apr 10, 2022
BEST ANSWER: The speaker has a power cord included much like a computer monitor uses. No transformer.
- Reply
- Inaccurate
- Samuel W on Apr 11, 2022
- Purchased on Feb 26, 2022
BEST ANSWER: The speaker has a power cord included much like a computer monitor uses. No transformer.
- Reply
- Inaccurate
- Samuel W on Apr 11, 2022
- Purchased on Feb 26, 2022
It is a CLASS D amp. Switching Lower supply. Lightweight.
- Reply
- Inaccurate
- Robert M on Apr 11, 2022
- Purchased on Mar 18, 2022
Vote for the best answer above!
Can I put this on a tripod?
A shopper
on Mar 23, 2023
BEST ANSWER: Yes. It will fit on any standard PA speaker tripod.
- Reply
- Inaccurate
- Dan K on Mar 23, 2023
- Purchased on Mar 7, 2023
BEST ANSWER: Yes. It will fit on any standard PA speaker tripod.
- Reply
- Inaccurate
- Dan K on Mar 23, 2023
- Purchased on Mar 7, 2023
It does have speaker stand mounts
- Reply
- Inaccurate
- Richard J on Mar 23, 2023
- Purchased on Mar 30, 2022
Vote for the best answer above!
Is the XLR mix output line level?
John S
on Oct 15, 2021
BEST ANSWER: It is not an amplified signal if that is what you are asking. You can go to another amp or to another powered speaker
- Reply
- Inaccurate
- Richard N on Oct 16, 2021
- Purchased on Sep 7, 2021
BEST ANSWER: It is not an amplified signal if that is what you are asking. You can go to another amp or to another powered speaker
- Reply
- Inaccurate
- Richard N on Oct 16, 2021
- Purchased on Sep 7, 2021
No. XLR is the input jack for line levels and mix out is for connecting another speaker. XLR is a line/mic B input from a line level source or a dynamic microphone..
- Reply
- Inaccurate
- Kim B on Jul 1, 2022
- Purchased on May 30, 2022
Vote for the best answer above!
Is anyone using this as an frfr for guitar with a HeadRush or similar multi effects pedal? Opinion on performance vs HeadRush, Alto or Harley Benton FRFR?
New User U
on Nov 12, 2022
BEST ANSWER: I’m using this with a Walrus Audio ACS-1 and it’s perfectly fine, with the caveat that I only use it for practicing and as a stage monitor — I send my main sound to the house directly from the pedal. I also use this with a bass and an Orange Bass Butler pedal in the same way.
PA speakers like this have a wider range of frequencies that they can reproduce, so you’re going to (potentially) hear more than you would from an FRFR with a narrower range. For me that’s great, because I can use one speaker for guitar and bass without losing anything. But if, e.g., you really don’t want to hear any extra harmonic content, you might not like it. Really depends on what you’re after.
PA speakers like this have a wider range of frequencies that they can reproduce, so you’re going to (potentially) hear more than you would from an FRFR with a narrower range. For me that’s great, because I can use one speaker for guitar and bass without losing anything. But if, e.g., you really don’t want to hear any extra harmonic content, you might not like it. Really depends on what you’re after.
- Reply(1)
- Inaccurate
- Olivia C on Nov 12, 2022
- Purchased on Jun 13, 2022
Thank you for responding Olivia. I’ve rambled a bit below on FRFR vs PA cab and maybe they aren’t that different. Appreciate your perspective.
I’ve got a Headrush MX-5 and since I don’t have an FRFR I run it into the front of an amp without the cab sim. That said, it’s more like a traditional fx pedal used that way. So I’m looking at an FRFR to see really is a major difference in amp models with an FRFR and cab IR’s. The Jarley Benton looks a lot like the Monoprice units and has similar output specs. What I don’t see is the frequency range for the Monoprice but since has a woofer and tweeter it’s obviously full range. The Harley Benton FRFR is 48-19,000 hz so I’m thinking there’s some blurring of the lines between PA and units labeled FRFR. What I would note as ironic is if your connecting to a PA, the audience isn’t hearing the same thing as you hear through an FRFR monitor. So maybe it’s all overblown a bit and there isn’t a huge difference between a PA, FRFR or even my amp combo with a good clean channel in front or with the preamp bypassed. Opinions appreciated.
I’ve got a Headrush MX-5 and since I don’t have an FRFR I run it into the front of an amp without the cab sim. That said, it’s more like a traditional fx pedal used that way. So I’m looking at an FRFR to see really is a major difference in amp models with an FRFR and cab IR’s. The Jarley Benton looks a lot like the Monoprice units and has similar output specs. What I don’t see is the frequency range for the Monoprice but since has a woofer and tweeter it’s obviously full range. The Harley Benton FRFR is 48-19,000 hz so I’m thinking there’s some blurring of the lines between PA and units labeled FRFR. What I would note as ironic is if your connecting to a PA, the audience isn’t hearing the same thing as you hear through an FRFR monitor. So maybe it’s all overblown a bit and there isn’t a huge difference between a PA, FRFR or even my amp combo with a good clean channel in front or with the preamp bypassed. Opinions appreciated.
- Reply (1)
- New User U on Nov 12, 2022
Here’s the specs on the Headrush FRFR 112 note it’s frequency response is 46-22,000 hz.. my point is, unless the supposed frfr’s are truly flat response, I don’t see any real difference between an FRFR and this Monoprice powered PA.
Specs:
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 12-inch (305 mm) LF driver, 3-inch (76.2 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) voice coil, neodymium magnet HF driver, with precision wave guide
Crossover: 2KHz
Maximum SPL: 131 dB peak, 128 dB continuous (dB SPL @ 1 m)
Frequency Response: 53 Hz – 20 kHz (+/- 3 dB)
Frequency Range: 46 Hz – 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1/4-inch (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch; EQ contour switch; Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
AC Voltage Input: 100-110/110-120/220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Dimensions (H x W x D): 23.8” x 13.9” x 13.8” / 605mm x 354mm x 350mm
Net Weight: 35.87 lbs. / 16.27 kg.
Specs:
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 12-inch (305 mm) LF driver, 3-inch (76.2 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) voice coil, neodymium magnet HF driver, with precision wave guide
Crossover: 2KHz
Maximum SPL: 131 dB peak, 128 dB continuous (dB SPL @ 1 m)
Frequency Response: 53 Hz – 20 kHz (+/- 3 dB)
Frequency Range: 46 Hz – 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1/4-inch (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch; EQ contour switch; Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
AC Voltage Input: 100-110/110-120/220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Dimensions (H x W x D): 23.8” x 13.9” x 13.8” / 605mm x 354mm x 350mm
Net Weight: 35.87 lbs. / 16.27 kg.
- Reply
- New User U on Nov 12, 2022
BEST ANSWER: I’m using this with a Walrus Audio ACS-1 and it’s perfectly fine, with the caveat that I only use it for practicing and as a stage monitor — I send my main sound to the house directly from the pedal. I also use this with a bass and an Orange Bass Butler pedal in the same way.
PA speakers like this have a wider range of frequencies that they can reproduce, so you’re going to (potentially) hear more than you would from an FRFR with a narrower range. For me that’s great, because I can use one speaker for guitar and bass without losing anything. But if, e.g., you really don’t want to hear any extra harmonic content, you might not like it. Really depends on what you’re after.
PA speakers like this have a wider range of frequencies that they can reproduce, so you’re going to (potentially) hear more than you would from an FRFR with a narrower range. For me that’s great, because I can use one speaker for guitar and bass without losing anything. But if, e.g., you really don’t want to hear any extra harmonic content, you might not like it. Really depends on what you’re after.
- Reply(1)
- Inaccurate
- Olivia C on Nov 12, 2022
- Purchased on Jun 13, 2022
Thank you for responding Olivia. I’ve rambled a bit below on FRFR vs PA cab and maybe they aren’t that different. Appreciate your perspective.
I’ve got a Headrush MX-5 and since I don’t have an FRFR I run it into the front of an amp without the cab sim. That said, it’s more like a traditional fx pedal used that way. So I’m looking at an FRFR to see really is a major difference in amp models with an FRFR and cab IR’s. The Jarley Benton looks a lot like the Monoprice units and has similar output specs. What I don’t see is the frequency range for the Monoprice but since has a woofer and tweeter it’s obviously full range. The Harley Benton FRFR is 48-19,000 hz so I’m thinking there’s some blurring of the lines between PA and units labeled FRFR. What I would note as ironic is if your connecting to a PA, the audience isn’t hearing the same thing as you hear through an FRFR monitor. So maybe it’s all overblown a bit and there isn’t a huge difference between a PA, FRFR or even my amp combo with a good clean channel in front or with the preamp bypassed. Opinions appreciated.
I’ve got a Headrush MX-5 and since I don’t have an FRFR I run it into the front of an amp without the cab sim. That said, it’s more like a traditional fx pedal used that way. So I’m looking at an FRFR to see really is a major difference in amp models with an FRFR and cab IR’s. The Jarley Benton looks a lot like the Monoprice units and has similar output specs. What I don’t see is the frequency range for the Monoprice but since has a woofer and tweeter it’s obviously full range. The Harley Benton FRFR is 48-19,000 hz so I’m thinking there’s some blurring of the lines between PA and units labeled FRFR. What I would note as ironic is if your connecting to a PA, the audience isn’t hearing the same thing as you hear through an FRFR monitor. So maybe it’s all overblown a bit and there isn’t a huge difference between a PA, FRFR or even my amp combo with a good clean channel in front or with the preamp bypassed. Opinions appreciated.
- Reply (1)
- New User U on Nov 12, 2022
Here’s the specs on the Headrush FRFR 112 note it’s frequency response is 46-22,000 hz.. my point is, unless the supposed frfr’s are truly flat response, I don’t see any real difference between an FRFR and this Monoprice powered PA.
Specs:
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 12-inch (305 mm) LF driver, 3-inch (76.2 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) voice coil, neodymium magnet HF driver, with precision wave guide
Crossover: 2KHz
Maximum SPL: 131 dB peak, 128 dB continuous (dB SPL @ 1 m)
Frequency Response: 53 Hz – 20 kHz (+/- 3 dB)
Frequency Range: 46 Hz – 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1/4-inch (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch; EQ contour switch; Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
AC Voltage Input: 100-110/110-120/220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Dimensions (H x W x D): 23.8” x 13.9” x 13.8” / 605mm x 354mm x 350mm
Net Weight: 35.87 lbs. / 16.27 kg.
Specs:
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 12-inch (305 mm) LF driver, 3-inch (76.2 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) voice coil, neodymium magnet HF driver, with precision wave guide
Crossover: 2KHz
Maximum SPL: 131 dB peak, 128 dB continuous (dB SPL @ 1 m)
Frequency Response: 53 Hz – 20 kHz (+/- 3 dB)
Frequency Range: 46 Hz – 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1/4-inch (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch; EQ contour switch; Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
AC Voltage Input: 100-110/110-120/220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Dimensions (H x W x D): 23.8” x 13.9” x 13.8” / 605mm x 354mm x 350mm
Net Weight: 35.87 lbs. / 16.27 kg.
- Reply
- New User U on Nov 12, 2022
This was the reason I bought one and have been totally happy with it for this purpose. Still need to buy another one for stereo.
- Reply
- Inaccurate
- Steve H on Feb 4, 2024
- Purchased on Jun 19, 2023
Vote for the best answer above!
Does a Bluetooth source play out the mix out jack, to connect another speaker?
A shopper
on Mar 7, 2023
I dont think so. In my experience, the speaker will just receive a bluetooth signal but not send one.
- Reply
- Inaccurate
- William M on Mar 8, 2023
- Purchased on Nov 7, 2022
Vote for the best answer above!
Can I plug in a microphone and an acoustic guitar at the same time?
A shopper
on Aug 22, 2023
BEST ANSWER: If you are micing your acoustic guitar, yes - you can have two microphone inputs. If your acoustic has an internal pickup and an output jack, then technically speaking you would need a DI (Direct In) box to change the impedance from Instrument Level (aka HiZ) to line or microphone level, as those are the only input jacks on the back of the unit. Or such is my understanding of the universe.
- Reply
- Inaccurate
- Michael M on Aug 22, 2023
- Purchased on Dec 12, 2022
BEST ANSWER: If you are micing your acoustic guitar, yes - you can have two microphone inputs. If your acoustic has an internal pickup and an output jack, then technically speaking you would need a DI (Direct In) box to change the impedance from Instrument Level (aka HiZ) to line or microphone level, as those are the only input jacks on the back of the unit. Or such is my understanding of the universe.
- Reply
- Inaccurate
- Michael M on Aug 22, 2023
- Purchased on Dec 12, 2022
Vote for the best answer above!
Can one device (phone, ipad, etc) Bluetooth connect to more than one of these speakers?
Joseph C
on May 27, 2021
BEST ANSWER: Yes, but one drops out every now and then.
- Reply
- Inaccurate
- Richard J on Jun 27, 2022
- Purchased on Mar 30, 2022
BEST ANSWER: Yes, but one drops out every now and then.
- Reply
- Inaccurate
- Richard J on Jun 27, 2022
- Purchased on Mar 30, 2022
Vote for the best answer above!
Can the SRD212 and SRD215 be paired together for stereo sound?
New User U
on Jun 1, 2021
BEST ANSWER: You wouldnt do one on one side and one on the other but you could do a 12 and 15 on one side and another pair on the other . You could send a cable from one 12 to the other and 15 to the other. You would get a bigger bassier sound. Me i would pair matched speakers with powered bass modules instead.
- Reply
- Inaccurate
- Paul T on Feb 4, 2022
BEST ANSWER: You wouldnt do one on one side and one on the other but you could do a 12 and 15 on one side and another pair on the other . You could send a cable from one 12 to the other and 15 to the other. You would get a bigger bassier sound. Me i would pair matched speakers with powered bass modules instead.
- Reply
- Inaccurate
- Paul T on Feb 4, 2022
Vote for the best answer above!
Does this have a hole for a speaker stand?
A shopper
on Nov 7, 2021
Vote for the best answer above!
Is there a pole mount hole and what is the hole size?
New User U
on Nov 23, 2021
BEST ANSWER: Theres a pole hole...takes a standard pole...the stands on monoprice fit perfectly and are good stands.
- Reply
- Inaccurate
- Paul T on Feb 4, 2022
BEST ANSWER: Theres a pole hole...takes a standard pole...the stands on monoprice fit perfectly and are good stands.
- Reply
- Inaccurate
- Paul T on Feb 4, 2022
Vote for the best answer above!
What is the max SPL? Pref @ 1 Meter or half space
Hosie C
on Apr 27, 2022
BEST ANSWER: I maxed it on the speakers and then made the adjustments on the board
- Reply
- Inaccurate
- Ralph E on May 10, 2022
- Purchased on Nov 1, 2021
BEST ANSWER: I maxed it on the speakers and then made the adjustments on the board
- Reply
- Inaccurate
- Ralph E on May 10, 2022
- Purchased on Nov 1, 2021
Vote for the best answer above!
Is this a full range flat response speaker like the Headrush? FRFR
A shopper
on Mar 30, 2023
BEST ANSWER: Hello and thank you for your question. This powered speaker can be used like the Headrush speaker through adjustments on the amp.
- Reply
- Inaccurate
- Carlos R Staff on Aug 8, 2023
BEST ANSWER: Hello and thank you for your question. This powered speaker can be used like the Headrush speaker through adjustments on the amp.
- Reply
- Inaccurate
- Carlos R Staff on Aug 8, 2023
Vote for the best answer above!
Mic and Line Input, Work Great, Any way to get Line OUT? Need Line Out from SRD212 to connect a Subwoofer Amplifier
A shopper
on May 6, 2023
BEST ANSWER: Hello and thank you for your question. You can use the Mix Out and connect an XLR cable to a powered subwoofer.
- Reply
- Inaccurate
- Carlos R Staff on Jul 13, 2023
BEST ANSWER: Hello and thank you for your question. You can use the Mix Out and connect an XLR cable to a powered subwoofer.
- Reply
- Inaccurate
- Carlos R Staff on Jul 13, 2023
Vote for the best answer above!
What do the DSP modes actually do? Neither the product description nor the manual say other than it is selectable.
A shopper
on Oct 17, 2023
BEST ANSWER: DSP (Digital Signal Processor): DSP modes have been designed to simulate different acoustic environments.. Basically a bunch of preset EQ settings and sometimes a little digital processing thrown in, too, to mimic different acoustic environments. I think it's all nonsense. But it does potentially serve the purpose of possibly tailoring the sound maybe to individual tastes, sometimes, I guess.
- Reply
- Inaccurate
- Michael M on Oct 17, 2023
- Purchased on Dec 12, 2022
BEST ANSWER: DSP (Digital Signal Processor): DSP modes have been designed to simulate different acoustic environments.. Basically a bunch of preset EQ settings and sometimes a little digital processing thrown in, too, to mimic different acoustic environments. I think it's all nonsense. But it does potentially serve the purpose of possibly tailoring the sound maybe to individual tastes, sometimes, I guess.
- Reply
- Inaccurate
- Michael M on Oct 17, 2023
- Purchased on Dec 12, 2022
Vote for the best answer above!
Is the LM15A meant to be paired with the SRD series?
A shopper
on Dec 14, 2023
BEST ANSWER: Hello, I own a pair of these Monoprice 12" full-range speakers and use them with 15" subwoofers; but a different brand. I have been a mobile DJ for over 30 years and can tell you these speakers sound great! Although I do not own a Monoprice subwoofer, I use a different brand of 15" sub and it compliments the sound of these speakers very nicely. A 15" sub with 12" mains should be able to handle most events under 200 people unless you are in a giant room.
- Reply
- Inaccurate
- JOSEPH JR. V on Dec 14, 2023
- Purchased on Jul 22, 2023
BEST ANSWER: Hello, I own a pair of these Monoprice 12" full-range speakers and use them with 15" subwoofers; but a different brand. I have been a mobile DJ for over 30 years and can tell you these speakers sound great! Although I do not own a Monoprice subwoofer, I use a different brand of 15" sub and it compliments the sound of these speakers very nicely. A 15" sub with 12" mains should be able to handle most events under 200 people unless you are in a giant room.
- Reply
- Inaccurate
- JOSEPH JR. V on Dec 14, 2023
- Purchased on Jul 22, 2023
Vote for the best answer above!
Are the 1/4 inputs balanced (TRS) or unbalanced (TS)?
A shopper
on Feb 4, 2024
BEST ANSWER: The manual isn't specific on that answer.
I'm less than impressed the seller asked a former buyer to answer this question for a potential buyer.
If anyone should have the answer to this question, it should be the seller.
I'm less than impressed the seller asked a former buyer to answer this question for a potential buyer.
If anyone should have the answer to this question, it should be the seller.
- Reply
- Inaccurate
- Steve H on Feb 4, 2024
- Purchased on Jun 19, 2023
BEST ANSWER: The manual isn't specific on that answer.
I'm less than impressed the seller asked a former buyer to answer this question for a potential buyer.
If anyone should have the answer to this question, it should be the seller.
I'm less than impressed the seller asked a former buyer to answer this question for a potential buyer.
If anyone should have the answer to this question, it should be the seller.
- Reply
- Inaccurate
- Steve H on Feb 4, 2024
- Purchased on Jun 19, 2023
Vote for the best answer above!
I want to have a stereo Guitar rig. I am curious if these can be used with my main Guitar amp as an additional speaker for stereo? Or would I need two of these to achieve the stereo effect? I do not use anything like a HeadRush or Pod Go. I’m strictly amp, pedal board which has stereo pedals and guitar. Thanks..
A shopper
on Feb 8, 2024
BEST ANSWER: Thank you for your question. Yes, this speaker can be used for that set up.
- Reply
- Inaccurate
- Carlos R Staff on Feb 14, 2024
BEST ANSWER: Thank you for your question. Yes, this speaker can be used for that set up.
- Reply
- Inaccurate
- Carlos R Staff on Feb 14, 2024
Vote for the best answer above!
Can this be used with powered speakers? Specifically, the Monoprice SRD212 or 215? Thanks!
A shopper
on Mar 25, 2024
Stage Right by Monoprice SRD212 1200W 12-inch Powered Speaker with Class D Amp, DSP, and Bluetooth Streaming
Stage Right by Monoprice ix4B 4-Channel Live Sound and Recording Mixer with Bluetooth, USB, and Effects
BEST ANSWER: Yes, with the appropriate cables. You can use the output of the board as an input for the speaker to increase your number of input. Depending on the quality you need, it does introduce another possible source of noise to the system.
- Reply
- Inaccurate
- Scott H on Mar 25, 2024
- Purchased on Sep 7, 2023
BEST ANSWER: Yes, with the appropriate cables. You can use the output of the board as an input for the speaker to increase your number of input. Depending on the quality you need, it does introduce another possible source of noise to the system.
- Reply
- Inaccurate
- Scott H on Mar 25, 2024
- Purchased on Sep 7, 2023
Vote for the best answer above!
Are there slipcovers for these or does anyone know any compatible 3rd party available for purchase?
Brian B
on Apr 24, 2024
BEST ANSWER: Hello and thank you for your question. At the moment we do not have a compatible slipcover option for this speaker. The best way we recommend looking for a compatible slipcover is to base it off of the speaker's dimensions.
- Reply
- Inaccurate
- Carlos R Staff on May 15, 2024
BEST ANSWER: Hello and thank you for your question. At the moment we do not have a compatible slipcover option for this speaker. The best way we recommend looking for a compatible slipcover is to base it off of the speaker's dimensions.
- Reply
- Inaccurate
- Carlos R Staff on May 15, 2024
Vote for the best answer above!
Can you mix Bluetooth, Mic 1, and Mic 2 all at the same time, so effectively a 3 channel mixer situation. I'm imagining the Bluetooth level would be controlled via the device(phone etc) connecting whilst the two mics would be controlled by the corresponding knobs?
A shopper
on May 21, 2024
BEST ANSWER: Hello,
Thank you for your inquiry. The bluetooth will be handled mostly by the source device. There is Line A which can be used for Mic which has it's own volume knob. Then the Line B has a Line/Mic selector button as well as a volume control knob. There is also EQ presets that can be selected.
Thank you for your inquiry. The bluetooth will be handled mostly by the source device. There is Line A which can be used for Mic which has it's own volume knob. Then the Line B has a Line/Mic selector button as well as a volume control knob. There is also EQ presets that can be selected.
- Reply
- Inaccurate
- Coty R Staff on Aug 20, 2024
BEST ANSWER: Hello,
Thank you for your inquiry. The bluetooth will be handled mostly by the source device. There is Line A which can be used for Mic which has it's own volume knob. Then the Line B has a Line/Mic selector button as well as a volume control knob. There is also EQ presets that can be selected.
Thank you for your inquiry. The bluetooth will be handled mostly by the source device. There is Line A which can be used for Mic which has it's own volume knob. Then the Line B has a Line/Mic selector button as well as a volume control knob. There is also EQ presets that can be selected.
- Reply
- Inaccurate
- Coty R Staff on Aug 20, 2024
Vote for the best answer above!
Spec sheet says 1.75” HF driver, manual says 1.35” HF driver... which is it? Also... are these bi amped or use a passive network ?
Robert M
on Apr 21, 2021
Does Monoprice sell a stand for this?
Keith B
on Sep 9, 2021
Size listed in the specs,is it the shipping box size or the product size?
Kurt
on Oct 14, 2021
Stage Right by Monoprice SRD212 1200W 12-inch Powered Speaker with Class D Amp, DSP, and Bluetooth Streaming
Stage Right by Monoprice SRD215 1400W 15in Powered Speaker with Class D Amp, DSP, and Bluetooth Streaming
Stage Right by Monoprice SRD210 800W 10-inch Powered Speaker with Class D Amp, DSP, and Bluetooth Streaming
What are actual dimensions? I want totes want these and want good fitting ones. Any recommendations? I have 12” model.
Robert M
on Nov 17, 2021
Questions For Similar Products
Reviews
4.4 / 5.0
23 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
14
6
1
2
0
Rated 4 out of 5
the sweet spot
good balance between weight and sound.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 3 out of 5
Power Amp Failed
Purchased two of these. One started going fuzzy in practice and then just died. Fuse still good. No way to economically fix due to price - replacement plate amps are not available. My amp tech won't even look at it as cost to repair exceeds buying another one. Will just buy another one when they go on sale.
- Was this review helpful? Yes (4) No (1)
- Flag as Inappropriate
September 18, 2024
- Was this review helpful? Yes (4) No (1)
- Flag as Inappropriate
Response from Monoprice
Thank you for your review. I'm sorry to hear your product is not working as expected. If you would like to troubleshoot or obtain information on how to optimize your product's performance you can contact us via email at [email protected] or by accessing: https://www.monoprice.com/help?pn=contact to reach us via chat or phone. Our knowledgeable tech support staff will be glad to assist. Thank you!
September 18, 2024
krisha h
Rated 5 out of 5
Great sound quality with good bass. Would purchase again!
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Response from Monoprice
We appreciate the great feedback on our product! We are glad to hear that you are satisfied with your purchase and that it meets your expectations. Thank you for shopping with us!
June 6, 2024
krisha h
Rated 5 out of 5
Sounds & Works GREAT
Purchased 2 SRD212 speakers for use as monitors as a gift to a local church to replace their old speakers that had died. Their musical director, sound person and members of the band have been sending me messages of thanks and are loving these speakers. They are using the speakers as monitors for the vocalists. The musicians are all on an in-ear system so they don't need to use these at a high volume level. Most people usually comment about how clean speakers sound when cranked, but these folks are loving the clarity at lower volume levels.
The sound engineer loves their Bluetooth capability as well for when they run tracks along with the on-stage musicians. The MD said that he's thrilled to have "a solid pair of speakers" that can be used for mains when they do outdoor or remote events when they aren't being used as stage monitors.
Great quality and a wonderful value!
Thanks Monoprice!
The sound engineer loves their Bluetooth capability as well for when they run tracks along with the on-stage musicians. The MD said that he's thrilled to have "a solid pair of speakers" that can be used for mains when they do outdoor or remote events when they aren't being used as stage monitors.
Great quality and a wonderful value!
Thanks Monoprice!
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Deep Base, easy to connect bluetooth as well
Got this 12" version for my daughter to play her electronic drums on. She was tired of headphones all the time, and wanted to share her playing with family. Good base, and bluetooth lets you play a song on your phone to play along with. Excellent for Drums!!!
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Big sound - small price
So far I've still not used all of the inputs or bluetooth features of this device. But what it has delivered is far better than anything else in the same price range, hands down.
I only gave it a 4 star rating because to use it as a floor monitor the cabinet isn't angled enough so you must wedge it with a block of wood or something to get it to the proper angle.
But I will probably buy a second one and put them on stands instead.
Monoprice has always delivered great product at amazingly low prices.
I only gave it a 4 star rating because to use it as a floor monitor the cabinet isn't angled enough so you must wedge it with a block of wood or something to get it to the proper angle.
But I will probably buy a second one and put them on stands instead.
Monoprice has always delivered great product at amazingly low prices.
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Great Speaker for Electronic Drums
I got this speaker to use with my Roland TD27 electronic drums. It works great! Prior to buying this SRD212 I had purchased a different "budget" brand from that big box store and it performed terribly. It could not handle all the frequencies that drum sounds put out. THIS stage right powered 12" works GREAT! It easily handles the electronic drums. Kick sounds punchy with boom and all the cymbals, snare sounds and toms shimmer and sing. The key setting is the "FLAT" eq on the back of the speaker and then minor tweaking in the Roland module and I have great drum sounds that blast out from the kit. I use it in practice AND performance. So not only are drums mixed through front-of-house pa, but also come off the stage with this awesome speaker. I've also used the Bluetooth to play music during workouts and in my backyard when friends are over and the sound quality and fullness is just great. Glad I got it, might buy a 2nd for stereo drums!
- Was this review helpful? Yes (1) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (1)
- Flag as Inappropriate
Rated 5 out of 5
Great Value
I have to say I was a bit hesitant buying these speakers. The price was great but worried about the performance. I was surprised how good they sounded. Very clean and powerful. I'll be using the 12" as stage monitors. They get more than loud enough. They could do the job as FOH mains in small venues as well. Great price and value.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Overall GOOD but not 1200 watts
This thing has limitations. The bass is lacking you will need a subwoofer. I hooked up a small JBL sub sounds fine. These speakers are not 1200 watts RMS I don't event think they are 400 watts RMS if I had to guess I'd say around 250 to 300 RMS because they peak out rather quickly. I got the 12" version had problems with one of them being blown right out the box which was surprising but issue was fixed. Bluetooth is nice but does not do stereo you have to use output to send to other speaker then adjust volumes. I was using output for subwoofer so have to pick and choose which one to run; For cost it's fine (if you want to use as home DJ Speakers) Maybe mid field monitors on a budget. There is a lack of bass though. So Subwoofer is a must IMO.
- Was this review helpful? Yes (4) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (4) No (1)
- Flag as Inappropriate
Rated 5 out of 5
Great speaker. Good price.
Great speaker. I ordered the 10" model but it was out of stock. After a delay, Monoprice sent me a SRD212 instead. Works great, lots of headroom. The Bluetooth feature is clean with easy connection.
I wish it had adjustable EQ, but its not a major issue.
I wish it had adjustable EQ, but its not a major issue.
- Was this review helpful? Yes (3) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (1)
- Flag as Inappropriate
Reviews for Similar Products