Volume Pricing (Log In to see Member Pricing)
3-Way Adjustable Tilting DUAL Desk Mount Bracket for LCD LED (Max 33Lbs, 10~23inch) - Black
Free space on your desk and gain improved ergonomics by using this 3-Way Adjustable Tilting Monitor Desk Mount Bracket from Monoprice!
Using a desk mount bracket provides additional desk space by moving the monitor above the desk. It allows you to position your monitor at eye level, which reduces neck/back strain and pain from lengthy sessions in front of the computer.
This mount attaches to the edge of a desk, table, or other horizontal surface with a maximum thickness about 1.75". It has two 14.2" jointed extension arms, which allows you to position your monitors at exactly the right height, angle, and distance. The monitors can be tilted and rotated, allowing for easy conversion between landscape and portrait mode on the monitor. It fits two monitors weighing up to 33 lbs. each, with either 75x75 or 100x100 VESA mounting patterns.
- Fits two monitors with VESA 75x75 and 100x100 mounting patterns
- Tilts ±30 degrees
- Rotates 360 degrees allowing for easy portrait or landscape orientation
- Height adjustable to about 17.7"
- Two 14.2" jointed extension arms
- Clamps to surfaces between 0.9" ~ 1.75" thick
- Includes cable management clips
- User's Manual (Oct 4, 2011)
|Minimum VESA||75 x 75|
|Maximum VESA||100 x 100|
|Maximum Weight||33 lbs/display|
|Minimum Display Size||10"|
|Maximum Display Size||23"|
|Tilt Range||±30 degrees|
|Swivel Range||±90 degrees|
|Rotation Range||360 degrees|
|Construction||Steel and Aluminum|
|Wall Plate Dimensions||N/A|
|Front Plate Dimensions||4.5" x 4.5"|
|Built In Level||No|
Questions and Answers
My only concern would be the contact point: there isn't much that holds it to the table it's mounted to ( just two bolts) but you'll probably be okay.
PROS: These inexpensive LCD monitor stands easily support monitors of 24". Perhaps most importantly, is the ability to remove the clamp-on-bracket from the bottom and to bolt the monitor stand directly to a table-top, counter or desk. We have purchased several of these monitor stands and have removed the clamp on all of them and replaced it with a 9mm bolt through a desk or countertop. This permits the monitor arm to be mounted in the middle of a flat surface and not just at the edge of the surface, which is the restriction with the provided clamp.
CONS: Does not make coffee or toast.
PROS: Works just like it says.
All hardware was there, and instructions easy to follow.
CONS: Would be better if the main desk mounting bracket had one big bolt instead of two.
PROS: Works as advertised. Holds both my monitors in optimal positions off my desk.
CONS: Allen screws are a pain in the butt. Get an Allen attachment for you screw gun and its a lot easier. Other than that install was simple. I was even able to modify it for use with a non-VESA monitor.
PROS: speedy delivery
CONS: since the product is shipped from USA, we have to pay custom and brokeage fee which cost over $20
The mount is very easy to put together, took me less than 15 minutes to put it all together. If you're considering this mount and just not sure, buy it. You'll be happy you did.
PROS: Solid, wide wingspan, very easy to position and tighten into place. Oh, and the price is amazing for what you get.
This bracket is great, and the price is awesome.
Monoprice is incredible!!!!!!
"RMA - Lindsey T: Typically, we do not have spare parts for items, so what we would do is create the RMA for replacement and have our warehouse look for the spare parts. If we have them, then we will only send the missing part however, if we do not, then we send out a whole new item for replacement. Read Cons first then Pros, get ready to go to Lowes and find your own screws!
PROS: Kurt: I can go to the hardware store a remedy this. I'm telling you all of your 5560's are missing parts and the instructions are wrong too.
Kurt: There should be 8 m4x14 and 8 m5x14 and the instructions say 4 of each and thats all thats in the box.
CONS: RMA - Lindsey T: Typically, we do not have spare parts for items, so what we would do is create the RMA for replacement and have our warehouse look for the spare parts. If we have them, then we will only send the missing part however, if we do not, then we send out a whole new item for replacement.
PROS: Solid, Secure, Adaptable. Works on 24" Monitors
CONS: Can be difficult to secure rotating ball heads firm enough.
PROS: Received 2 Dell Monitors for Christmas and needed to raise off desk to conserve space [have existing 3rd monitor that will also be running]. Monoprice had what appeared to be a heavy-duty stand and a very good price for such. Ordered and received in just a few days (Yeah!). Opened it up and all parts were clearly strong and well constructed. No missing pieces and clearly written instructions.
Also ordered 2 cables to connect monitors to my nVidea GTX750 Ti card.
Bottom line: Well-constructed with flexibility to take many monitor models great price and rapid delivery.
CONS: None at this time.