Monoprice Caliber In-Ceiling Speakers, 6.5in Fiber 2-Way (pair)
Product # 4103
UPC # 844660041030
$54.99
$69.99
Save $15.00 (21%)
*Affirm is not available for business or international orders
Qty: 1
$54.99
$69.99
Qty: 2-9
$54.99
$67.89
Qty: 10-19
$54.99
$67.19
Qty: 20-49
$54.99
$66.49
Qty: 50+
$54.99
$65.79
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 116 questions
Browse 116 questions
and 221 answers
do these speakers need a back cover?
A shopper
on Dec 1, 2018
BEST ANSWER: When I installed them in the ceiling, a back cover wasn’t necessary for the install. However, our bedroom is above the room with the ceiling speakers...and I CAN hear the speaker’s sound in my bedroom depending on the volume. At low volume it’s not noticeable in the bedroom, but at high volume I can clearly hear the sound in the floor. So for that reason, a back cover may be needed if that’s a problem. Hope this info is helpful.
- Reply
- Inaccurate
- Christopher L on Dec 2, 2018
- Purchased on Jan 28, 2018
BEST ANSWER: When I installed them in the ceiling, a back cover wasn’t necessary for the install. However, our bedroom is above the room with the ceiling speakers...and I CAN hear the speaker’s sound in my bedroom depending on the volume. At low volume it’s not noticeable in the bedroom, but at high volume I can clearly hear the sound in the floor. So for that reason, a back cover may be needed if that’s a problem. Hope this info is helpful.
- Reply
- Inaccurate
- Christopher L on Dec 2, 2018
- Purchased on Jan 28, 2018
No, cover is not needed. They will install and work fine without it. They do make enclosers for some, but they would need to be a match and I am not sure if Monoprice sells the box for these exact speakers. The encloser is only needed if you want a slightly better sound, or if you had a room on the opposite side of the speaker that you didnt want the sound to travel to as much. It wont silence that, but it would help a bit.
- Reply
- Inaccurate
- Chad B on Dec 1, 2018
- Purchased on Feb 27, 2018
No. In my application they were easily installed in the basement ceiling between two ceiling joists. The ceiling cavity acts as the back box and they sound great in a home theatre setup. In theory you could Bax them in from behind but I am not sure you would gain anything. I also insulated my ceiling as sound proofing.
- Reply
- Inaccurate
- New User U on Dec 1, 2018
- Purchased on Jan 19, 2018
No. I installed mine in a drop ceiling. They work great.
- Reply
- Inaccurate
- Paul B on Dec 2, 2018
- Purchased on Apr 10, 2018
Vote for the best answer above!
What does two-way pair mean?
Nils L
on Mar 29, 2022
BEST ANSWER: Pair - two speakers for the price shown
Two-way - Each speaker includes separate two drivers, a tweeter for high-end frequencies and a 2nd larger driver for mid and low frequencies.
Two-way - Each speaker includes separate two drivers, a tweeter for high-end frequencies and a 2nd larger driver for mid and low frequencies.
- Reply
- Inaccurate
- David C B on Apr 11, 2022
BEST ANSWER: Pair - two speakers for the price shown
Two-way - Each speaker includes separate two drivers, a tweeter for high-end frequencies and a 2nd larger driver for mid and low frequencies.
Two-way - Each speaker includes separate two drivers, a tweeter for high-end frequencies and a 2nd larger driver for mid and low frequencies.
- Reply
- Inaccurate
- David C B on Apr 11, 2022
These are a coaxial design. They have separate woofer and tweeter diaphragms but they share the same motor structure. They considered a 2-way speaker.
- Reply
- Inaccurate
- Donnie on Mar 31, 2022
- Purchased on Mar 13, 2022
2-way means each speaker has a woofer and a tweeter. Pair means there are two speakers in the package.
- Reply
- Inaccurate
- Brett C on Apr 11, 2022
Pair just means you get 2 speakers. The 2-way is in reference to the fiber.
- Reply
- Inaccurate
- Greg T on Apr 11, 2022
Each speaker is a 2 way speaker and a pair, or 2 speakers, are included.
- Reply
- Inaccurate
- Jeff G on Apr 12, 2022
Vote for the best answer above!
Damp locations, is it suitable for garages, bathrooms etc.?
A shopper
on Dec 23, 2018
BEST ANSWER: These speakers are safe to use around moisture.
- Reply(1)
- Inaccurate
- Dave L Staff on Dec 26, 2018
BEST ANSWER: These speakers are safe to use around moisture.
- Reply(1)
- Inaccurate
- Dave L Staff on Dec 26, 2018
I have use the speakers in many different situations even outside under the eaves. In situations where there’s more moisture I usually paint the grills with a rust free paint both sides never had a problem.
- Reply
- Inaccurate
- KB on Dec 23, 2018
- Purchased on Mar 15, 2018
I placed it in the basement which humidity is usually high and have not had issues. It should be fine on a bathroom as long as there is an exhaust fan.
- Reply
- Inaccurate
- CML Decor and Design L on Dec 24, 2018
- Purchased on Jul 15, 2018
Honestly, I wouldn't hesitate to put these in the garage, but I most likely wouldn't put these in the bathroom.
- Reply
- Inaccurate
- Bradley D on Dec 23, 2018
- Purchased on Mar 11, 2018
Yes, I have installed these in many bathrooms and they work great.
- Reply
- Inaccurate
- Darryl P on Dec 24, 2018
- Purchased on Aug 27, 2018
Vote for the best answer above!
Speaker wire size?
A shopper
on Jun 29, 2019
I used 16Ga wire, my runs were not over 25 ft Use 14Ga for distances over that. if you choose to. Heavier gauge wire is always better than going to a wire size that is too small
- Reply
- Inaccurate
- Jack C on Jul 1, 2019
- Purchased on Sep 24, 2018
I have used these in many custom installs and I generally use 16 gauge speaker wire. You will be happy with the performance of these speakers!!
- Reply
- Inaccurate
- Darryl P on Jul 1, 2019
- Purchased on Aug 27, 2018
It depends on how far you need to run the wire. To be safe run 14 gauge. I have ran that 150’ with no problems
- Reply
- Inaccurate
- Martin G on Jul 1, 2019
- Purchased on Nov 8, 2018
Do no know. Just know that the longer the run, the bigger the wire needs to be.
- Reply
- Inaccurate
- Billy on Jul 1, 2019
- Purchased on Sep 22, 2018
Vote for the best answer above!
can this be in direct contact with insulation?
Joel J
on Sep 30, 2019
BEST ANSWER: You do not need to isolate from the insulation. You can use our back cans as an option. It will tighten up the bass a little
- Reply
- Inaccurate
- Dave L Staff on Oct 1, 2019
Monoprice ABS Back Enclosure (Pair) for PID 4103, 6.5in Ceiling Speaker (Will not work for PIDs 4102 or 4104)
BEST ANSWER: You do not need to isolate from the insulation. You can use our back cans as an option. It will tighten up the bass a little
- Reply
- Inaccurate
- Dave L Staff on Oct 1, 2019
Monoprice ABS Back Enclosure (Pair) for PID 4103, 6.5in Ceiling Speaker (Will not work for PIDs 4102 or 4104)
No, if it’s the loose type (blown in), Probably if it’s the blanket type (attached to paper backing). I used the ABS back enclose accessory for my installation as I had the blown in type insulation. You could get some type of screening material to create a barrier between the insulation and the speakers. You’ll have to shape it around the speaker and attach it to the wood ceiling supports. That’s what was used with my speakers in two other rooms and for all my recessed lights and electric boxes for ceiling fan boxes etc. Of course, you should always consult your local building codes!
- Reply
- Inaccurate
- DEDRICK H on Oct 1, 2019
- Purchased on Sep 9, 2019
They don’t appear to be designed for insulation, but there is a circuit board that would sort of protect the rear of the speakers themselves.
Heat buildup in the crossover might be a problem, but again you could probably get away with it. You are probably not going to hit these with a lot of watts anyway.
When I put them in an insulated ceiling, I built a little cage over top of them -just some scrap furring strips to keep somewhat of a gap, and they have worked fine.
Heat buildup in the crossover might be a problem, but again you could probably get away with it. You are probably not going to hit these with a lot of watts anyway.
When I put them in an insulated ceiling, I built a little cage over top of them -just some scrap furring strips to keep somewhat of a gap, and they have worked fine.
- Reply
- Inaccurate
- Andy on Sep 30, 2019
- Purchased on Sep 10, 2019
It depends on the insulation, fiberglass batt would be ok but I would not with loose fill. I ordered the enclosures that fit these speakers, to keep to keep loose insulation, bugs and mice from interfering with or potentially damaging the speakers. I also add a 1.5" round, press in soffit vent with a screen, to the enclosures to eliminate the vacuum effect that a sealed enclosure causes, restricting the movement of the speaker cone.
Monoprice ABS Back Enclosure (Pair) for PID 4103 6 1/2" Ceiling Speaker (Open Box)
- Reply
- Inaccurate
- D Thomson A on Sep 30, 2019
- Purchased on Sep 16, 2019
Im sure it could be, but I'd suggest the back boxes they make for them. They fit nicely and provide a sealed enclosure for each speaker.
- Reply(1)
- Inaccurate
- Tony W on Sep 30, 2019
- Purchased on Jul 16, 2019
Thanks! due to energy code here in MN, I need to use a back box to seal out the outside air. The back boxes I found are either 3.5" deep or 10" I want to avoid the 10" ones due to it being that much less insulation to keep the cold out. I was going to put insulation inside the back box, but maybe the easiest answer is to just not add insulation to the back box, or get the bigger back box and fill it, and add the box built for this speaker...
Vote for the best answer above!
What ki
How the grill is attached to the speaker ?
How the grill is attached to the speaker ?
Raul C
on Mar 16, 2018
BEST ANSWER: It is press fit. There is a small flange on the outside of the grill that fits snugly into the frame. They give you a tool (just a glorified paper clip) to pull the grill out when you need to remove it.
- Reply
- Inaccurate
- George C on Mar 16, 2018
- Purchased on Sep 4, 2017
BEST ANSWER: It is press fit. There is a small flange on the outside of the grill that fits snugly into the frame. They give you a tool (just a glorified paper clip) to pull the grill out when you need to remove it.
- Reply
- Inaccurate
- George C on Mar 16, 2018
- Purchased on Sep 4, 2017
There are no screws used to attach the grill. The grill edge fits inside a grove that sits just inside the edge of the speaker. There is some black tar like substance (supplied with the speaker) that you can put on the grill before installing it into the grove to hold it more secure. We did not need to use it. The grill fit snug enough without it.
A little wire hook is also supplied so the grill can be removed if necessary.
A little wire hook is also supplied so the grill can be removed if necessary.
- Reply
- Inaccurate
- John M on Mar 21, 2018
- Purchased on May 18, 2017
It's friction fit on to the speaker meaning the grill is slightly wider than the speaker opening and that holds it in place. It's a very secure tight fit
- Reply
- Inaccurate
- Robert W on Mar 17, 2018
- Purchased on Jul 21, 2017
It just presses in. It is tight in the frame
- Reply
- Inaccurate
- Patrick O on Mar 16, 2018
- Purchased on Sep 9, 2017
Vote for the best answer above!
What back enclosure you sell supports this speaker?
Brady C
on Dec 3, 2018
BEST ANSWER: Monoprice ABS Back Enclosure (Pair) for PID 4103, 6.5in Ceiling Speaker
- Reply
- Inaccurate
- Dave L Staff on Dec 3, 2018
Monoprice ABS Back Enclosure (Pair) for PID 4103, 6.5in Ceiling Speaker (Will not work for PIDs 4102 or 4104)
BEST ANSWER: Monoprice ABS Back Enclosure (Pair) for PID 4103, 6.5in Ceiling Speaker
- Reply
- Inaccurate
- Dave L Staff on Dec 3, 2018
Monoprice ABS Back Enclosure (Pair) for PID 4103, 6.5in Ceiling Speaker (Will not work for PIDs 4102 or 4104)
https://www.monoprice.com/product?p_id=11941 fits for mounting in drywall. It has four clamping ears to secure it from below requiring access only to the finish side. And a hole, of course.
- Reply
- Inaccurate
- Matt C on Dec 3, 2018
- Purchased on Nov 28, 2016
This enclosure matches the speakers perfectly.
Monoprice ABS Back Enclosure (Pair) for PID 4103, 6.5in Ceiling Speaker (Will not work for PIDs 4102 or 4104)
- Reply
- Inaccurate
- Michael J S on Dec 4, 2018
- Purchased on Jun 8, 2018
Vote for the best answer above!
What is the grip range of the toggles used to grab the drywall? I ask because I want to install them in a drop ceiling and want to know how thick of a reinforcement I could use.
Rick R
on Feb 16, 2019
BEST ANSWER: Toggles will work in surfaces up to 1.5".
- Reply
- Inaccurate
- Dave L Staff on Feb 19, 2019
BEST ANSWER: Toggles will work in surfaces up to 1.5".
- Reply
- Inaccurate
- Dave L Staff on Feb 19, 2019
Good Morning!! To be honest I am not sure the grip range but I can tell you that my sheet rock is a standard size and the toggles stretch out perfectly. Even if you have a thicker piece of sheet rock there would still be enough room on the toggle to screw out. The problem I m having is that its right up against a beam which limits the toggle to grab the other end of the sheet rock. Just make sure you have plenty of room on all sides to get a nice flushed bracket. Hope this helps!!
Greg
Greg
- Reply
- Inaccurate
- Greg R on Feb 17, 2019
- Purchased on May 7, 2018
I installed them directly to the drop ceiling tiles. They don't weigh that much and it should be fine. If you want to do a reinforcement, I would just use 1/4 plywood. That should be strong enough for any installation. The Toggles have around at least a 1" depth.
- Reply
- Inaccurate
- Clifton S on Feb 16, 2019
- Purchased on Apr 21, 2018
Vote for the best answer above!
How do these speakers get power?
New User U
on Feb 9, 2022
Monoprice Caliber In-Ceiling Speakers, 6.5in Fiber 2-Way (pair)
Monoprice Caliber In-Wall Speakers, 6.5in Fiber 2-Way (pair)
Monoprice Caliber In-Wall Center Channel Speaker, Dual 5.25in (single)
BEST ANSWER: They are powered by your amplifier. You must make sure that the impedance of the speaker matches the amplifier setting.
- Reply
- Inaccurate
- Eric F on Feb 9, 2022
BEST ANSWER: They are powered by your amplifier. You must make sure that the impedance of the speaker matches the amplifier setting.
- Reply
- Inaccurate
- Eric F on Feb 9, 2022
From an amplifier via speaker wires usually routed inside the walls.
- Reply
- Inaccurate
- David C B on Feb 9, 2022
They don’t need power. The power comes from the audio signal.
- Reply
- Inaccurate
- Beau F on Feb 9, 2022
- Purchased on Apr 4, 2021
From a stereo or surround receiver
- Reply
- Inaccurate
- Christopher K on Feb 9, 2022
- Purchased on Feb 14, 2021
Vote for the best answer above!
Are these able to be installed in drop tile ceiling or designed for dry wall use only?
A shopper
on Aug 28, 2017
BEST ANSWER: If you reinforced the particular drop ceiling tile with at least 1/4" plywood to prevent sagging over time it should work.
- Reply
- Inaccurate
- Charles W on Aug 28, 2017
- Purchased on Oct 25, 2016
BEST ANSWER: If you reinforced the particular drop ceiling tile with at least 1/4" plywood to prevent sagging over time it should work.
- Reply
- Inaccurate
- Charles W on Aug 28, 2017
- Purchased on Oct 25, 2016
These could be installed in the acoustical tile of the drop ceiling.
- Reply
- Inaccurate
- Thomas M on Aug 28, 2017
- Purchased on Oct 21, 2016
I have installed in both drywall and drop tile.
- Reply
- Inaccurate
- Warren J on Aug 28, 2017
- Purchased on Nov 28, 2016
Vote for the best answer above!
What is the correct enclosure size for the 6.5" speakers? I going to put these in a home that is being built and have lot of room above in the ceiling. The studs are 24 inch on center for the ceiling. I am going to be using these for both 9.2.2 surround sound and whole home speakers in 5 zones. all of these will be mounted in the ceiling. There will be blown in insulation on top, so I want the speakers in boxes.
A shopper
on Apr 10, 2018
BEST ANSWER: We are assembling a list of measurement for all of our in-wall and ceiling speakers for DIYers to build their own boxes. This Caliber speaker has a Back box that we sell.
- Reply
- Inaccurate
- Dave L Staff on Apr 16, 2018
Monoprice ABS Back Enclosure (Pair) for PID 4103, 6.5in Ceiling Speaker (Will not work for PIDs 4102 or 4104)
BEST ANSWER: We are assembling a list of measurement for all of our in-wall and ceiling speakers for DIYers to build their own boxes. This Caliber speaker has a Back box that we sell.
- Reply
- Inaccurate
- Dave L Staff on Apr 16, 2018
Monoprice ABS Back Enclosure (Pair) for PID 4103, 6.5in Ceiling Speaker (Will not work for PIDs 4102 or 4104)
Hi, so coming from a Audio speaker manufacturing and engineering background, that is a loaded question. There is a LOT of math that goes into enclosures and resonant frequencies, etc. If you build a box for them, the bass will definitely increase and you will protect the cones and crossovers from insulation. So on 24" centers, if you just build a 3 1/2" deep box for each from plywood, using the joists for the ends, that should suffice. little extra work, but will do the trick. We have installed these in Multi-million dollar homes, and honestly the difference between these and speakers costing 5-7 times more is negotiable, especially for surround as they just occasionally put out sound. For whole house background music, they're fine. Focus cost on front L&R and Center channel, preferably bookcase speakers. Monoprice has an amazing set designed for theatre. Jerry, northbaymediasystems dot com
- Reply
- Inaccurate
- North B on Apr 16, 2018
- Purchased on Sep 28, 2017
The speaker it self sits flush with the visible ceiling, it extends roughly 3-4 inches into the ceiling after mounting.
- Reply
- Inaccurate
- Trake G on Apr 16, 2018
- Purchased on Jul 22, 2017
Vote for the best answer above!
Can these speakers be used with rough-in brackets?
Matt H
on Nov 7, 2018
BEST ANSWER: Yes, standard 6.5" speaker brackets are compatible.
- Reply
- Inaccurate
- Dave L Staff on Nov 8, 2018
BEST ANSWER: Yes, standard 6.5" speaker brackets are compatible.
- Reply
- Inaccurate
- Dave L Staff on Nov 8, 2018
don’t know what is rough
In brackets but I installed my speakers in a sheet rock ceiling
Sorry i couldn’t help you
In brackets but I installed my speakers in a sheet rock ceiling
Sorry i couldn’t help you
- Reply
- Inaccurate
- Essam H on Nov 8, 2018
- Purchased on Nov 10, 2017
Yes, even though they do come with a template to cut out, and the speaker has built in tabs
- Reply
- Inaccurate
- Doug R on Nov 8, 2018
- Purchased on Dec 6, 2017
Vote for the best answer above!
I would like to use this device in a classroom. It already has Monoprice in-ceiling speakers installed. They are Caliber Ceiling Speakers 6.5-Inch Fiber 2-Way (pair) 475 Reviews | 17 Questions, 29 Answers Product # 4103. Will it power these speakers or does it need an external amplifier. If it does need an external amplifier, which one works best for these ceiling speakers?
Reese F
on Jul 25, 2017
Monoprice Caliber In-Ceiling Speakers, 6.5in Fiber 2-Way (pair)
Monoprice Blackbird HDBaseT 5x1 Seamless Presentation Switch and Scaler with IR, RS-232
BEST ANSWER: The Blackbird 4k Switcher/Scaler will not power your speakers. you will need a separate amplifier for that. Something like the Monoprice Unity 100-Watt Bridgeable Power Amp. It is available in 100watt & 200watt formats. Plan on needing 100 watts per pair of speakers. Iwould suggest a small audio mixer between the Blackbird 4k Switcher/Scaler and the amplifier to control the level of the source audio.
If you only have 2 speakers then the Monoprice Commercial Audio 120W 2ch Mixer Amp would be a inexpensive alternative. It is 60 watts per channel amplifier with left & right volume controls.
Hope that helps.
If you only have 2 speakers then the Monoprice Commercial Audio 120W 2ch Mixer Amp would be a inexpensive alternative. It is 60 watts per channel amplifier with left & right volume controls.
Hope that helps.
- Reply(2)
- Inaccurate
- David2022 on Jul 25, 2017
Monoprice Unity 100-Watt Bridgeable Power Amp
Monoprice Unity 200-Watt Bridgeable Power Amp
Monoprice Commercial Audio 120W 2ch Mixer Amp (No Logo)
Right on with the amp selection! However, I don't think a mixer is necessary, as the switcher/scaler has volume control built in.
Thank you. Are any of these options plenum so I can install these above the drop ceiling? If not, does Monoprice have a plenum-rated amp for use in our classrooms? We don't have room for cabinets full of AV gear so being able to mount devices like amps above the ceiling is helpful. If not, is there a small cabinet that monoprice has that can hold an amp and the 4K switcher/scaler?
Thanks,
R
Thanks,
R
BEST ANSWER: The Blackbird 4k Switcher/Scaler will not power your speakers. you will need a separate amplifier for that. Something like the Monoprice Unity 100-Watt Bridgeable Power Amp. It is available in 100watt & 200watt formats. Plan on needing 100 watts per pair of speakers. Iwould suggest a small audio mixer between the Blackbird 4k Switcher/Scaler and the amplifier to control the level of the source audio.
If you only have 2 speakers then the Monoprice Commercial Audio 120W 2ch Mixer Amp would be a inexpensive alternative. It is 60 watts per channel amplifier with left & right volume controls.
Hope that helps.
If you only have 2 speakers then the Monoprice Commercial Audio 120W 2ch Mixer Amp would be a inexpensive alternative. It is 60 watts per channel amplifier with left & right volume controls.
Hope that helps.
- Reply(2)
- Inaccurate
- David2022 on Jul 25, 2017
Monoprice Unity 100-Watt Bridgeable Power Amp
Monoprice Unity 200-Watt Bridgeable Power Amp
Monoprice Commercial Audio 120W 2ch Mixer Amp (No Logo)
Right on with the amp selection! However, I don't think a mixer is necessary, as the switcher/scaler has volume control built in.
Thank you. Are any of these options plenum so I can install these above the drop ceiling? If not, does Monoprice have a plenum-rated amp for use in our classrooms? We don't have room for cabinets full of AV gear so being able to mount devices like amps above the ceiling is helpful. If not, is there a small cabinet that monoprice has that can hold an amp and the 4K switcher/scaler?
Thanks,
R
Thanks,
R
This unit only has line audio output, not an amplified speaker output. You will need an external amplifier to power those speakers. PID#18513 or 18801 should do nicely.
Monoprice Unity 100-Watt Bridgeable Power Amp
Monoprice Commercial Audio 120W 2ch Mixer Amp (No Logo)
- Reply
- Inaccurate
- Dan B on Jul 26, 2017
- Purchased on Jul 10, 2017
Vote for the best answer above!
I have 4 Monoprice 4103 speakers. I would like to get this switch and an amplifier to drive them. Ideally I'd like to get a class D amp because the cabinet where speaker wire runs to is small. Any suggestions on what amplifier to use? Thanks.
A shopper
on Aug 18, 2017
Monoprice Caliber In-Ceiling Speakers, 6.5in Fiber 2-Way (pair)
Monoprice 4-Channel Speaker Selector
BEST ANSWER: Thanks for your interest in these audio products. I would run our new Unity 1/2 rack amps. 100W or 200W versions available.
- Reply
- Inaccurate
- Dave L Staff on Aug 18, 2017
Monoprice Unity 100-Watt Bridgeable Power Amp
Monoprice Unity 200-Watt Bridgeable Power Amp
BEST ANSWER: Thanks for your interest in these audio products. I would run our new Unity 1/2 rack amps. 100W or 200W versions available.
- Reply
- Inaccurate
- Dave L Staff on Aug 18, 2017
Monoprice Unity 100-Watt Bridgeable Power Amp
Monoprice Unity 200-Watt Bridgeable Power Amp
The 'class' of amplification used has nothing to do with anything.
- Reply
- Inaccurate
- Angelo A on Apr 26, 2018
- Purchased on Apr 5, 2018
Vote for the best answer above!
Can I use the monoprice 12G speaker wire with these speakers?
Geoffrey B
on Sep 9, 2017
Monoprice Caliber In-Ceiling Speakers, 6.5in Fiber 2-Way (pair)
Monoprice Speaker Wire, Enhanced Loud Oxygen-Free, No Logo, CL2 Rated, 12AWG, 100ft
BEST ANSWER: you could use these speaker wires but it is overkill.
- Reply
- Inaccurate
- earl f on Sep 11, 2017
BEST ANSWER: you could use these speaker wires but it is overkill.
- Reply
- Inaccurate
- earl f on Sep 11, 2017
Vote for the best answer above!
On the back of these speakers there is a little toggle switch. You can toggle between 3db, 6db and 9db. Anyone know what I should set my speakers to if they are being powered by the monoprice whole home audio system? 50w/channel.
Tyler F
on Apr 7, 2019
BEST ANSWER: The switch controls the output of the tweeter. If your room is really bright (hardwood, glass, etc.) you can attenuate the high frequency so the sound is not fatiguing.
- Reply
- Inaccurate
- Dave L Staff on Apr 15, 2019
BEST ANSWER: The switch controls the output of the tweeter. If your room is really bright (hardwood, glass, etc.) you can attenuate the high frequency so the sound is not fatiguing.
- Reply
- Inaccurate
- Dave L Staff on Apr 15, 2019
I left mine in 6dp and they work fine. I wasnt sure myself.
- Reply
- Inaccurate
- R I on Apr 17, 2019
- Purchased on Nov 26, 2018
Vote for the best answer above!
What size cable should I use if I'm daisy chaining these speakers?
A shopper
on Jul 30, 2019
BEST ANSWER: Depends on how far you are running and how much power you are using. i would feel pretty safe running 14AWG. if the run is over 100' and total amplifier power is over 100W you may want to go up to 12AWG.
- Reply
- Inaccurate
- Dave L Staff on Jul 31, 2019
BEST ANSWER: Depends on how far you are running and how much power you are using. i would feel pretty safe running 14AWG. if the run is over 100' and total amplifier power is over 100W you may want to go up to 12AWG.
- Reply
- Inaccurate
- Dave L Staff on Jul 31, 2019
I didn't run the wires in a daisy chain configuration , but I used 16 gauge wire at first and they sounded very thin and bright , then I swapped these wires out for 12 gauge and they sounded amazing and they had so much more mid range and warm detailed bass !!!!
- Reply
- Inaccurate
- Steve C on Jul 31, 2019
- Purchased on Aug 2, 2018
Vote for the best answer above!
Is this a Bluetooth speaker?
A shopper
on Jun 25, 2023
BEST ANSWER: No. This needs to be installed and wired back to a central amp you can use an amp that has Bluetooth or add that functionality through the aux input of many amps.
- Reply
- Inaccurate
- Kevin S on Jun 25, 2023
- Purchased on Jun 10, 2022
BEST ANSWER: No. This needs to be installed and wired back to a central amp you can use an amp that has Bluetooth or add that functionality through the aux input of many amps.
- Reply
- Inaccurate
- Kevin S on Jun 25, 2023
- Purchased on Jun 10, 2022
No. It’s a passive (no amplification), wired speaker.
- Reply
- Inaccurate
- RICHARD G on Jun 26, 2023
- Purchased on Aug 19, 2022
Vote for the best answer above!
What is the difference between product # 6034 and product # 4103?
Larry B
on Feb 20, 2017
Monoprice Caliber In-Ceiling Speakers, 6.5in Fiber 2-Way (pair)
Monoprice Caliber Ceiling Speakers 6.5 Inch Fiber 2-Way with Quick-Lock (pair)
BEST ANSWER: The 6034 has the Quick-Lock feature which makes installation quicker and easier. $103 is a better sounding speaker, Higher sensitivity (it's louder) and handles more power.
- Reply
- Inaccurate
- Dave L Staff on Feb 22, 2017
BEST ANSWER: The 6034 has the Quick-Lock feature which makes installation quicker and easier. $103 is a better sounding speaker, Higher sensitivity (it's louder) and handles more power.
- Reply
- Inaccurate
- Dave L Staff on Feb 22, 2017
Vote for the best answer above!
any installation depth at this acoustics?
Andrey O
on Feb 24, 2017
BEST ANSWER: Thanks for your interest in our ceiling speakers. i am not sure I understand the question. The product page states the mounting depth is 2.8" for this model.
- Reply
- Inaccurate
- Dave L Staff on Feb 28, 2017
BEST ANSWER: Thanks for your interest in our ceiling speakers. i am not sure I understand the question. The product page states the mounting depth is 2.8" for this model.
- Reply
- Inaccurate
- Dave L Staff on Feb 28, 2017
Vote for the best answer above!
This or Caliber series speakers?
If my rooms have two speakers in the ceiling, meaning I don't need to run a single speaker in stereo, why would I choose this versus the Caliber series - 4103 or 4104 for instance? Which is the better option if I am going to have two speakers in the room already?
thanks
If my rooms have two speakers in the ceiling, meaning I don't need to run a single speaker in stereo, why would I choose this versus the Caliber series - 4103 or 4104 for instance? Which is the better option if I am going to have two speakers in the room already?
thanks
Stephen B
on Apr 3, 2017
Monoprice Caliber In-Ceiling Speakers, 6.5in Fiber 2-Way (pair)
Monoprice Aria In-Ceiling Speakers, 6.5in Dual Input Stereo 2-Way (pair)
Monoprice Caliber In-Ceiling Speakers, 8in Fiber 2-Way (pair)
BEST ANSWER: Ifor you have two speakers in the room there is no point installing the stereo speakers. You would also need 2 pairs of wires per speaker to make use of them.
- Reply
- Inaccurate
- Keith V on Apr 3, 2017
- Purchased on Jun 27, 2016
BEST ANSWER: Ifor you have two speakers in the room there is no point installing the stereo speakers. You would also need 2 pairs of wires per speaker to make use of them.
- Reply
- Inaccurate
- Keith V on Apr 3, 2017
- Purchased on Jun 27, 2016
Vote for the best answer above!
Are these ok for a bathroom? Please let supplier answer this question.
A shopper
on Apr 3, 2017
BEST ANSWER: Thank you for your question. We would not recommend these speakers for use in a bathroom for the speakers would not be rated to handle moisture.
- Reply
- Inaccurate
- Mark P Staff on Apr 25, 2017
BEST ANSWER: Thank you for your question. We would not recommend these speakers for use in a bathroom for the speakers would not be rated to handle moisture.
- Reply
- Inaccurate
- Mark P Staff on Apr 25, 2017
Vote for the best answer above!
What is the cutout size for the 6.5" speakers?
What is the cutout size for the 6.5" speakers?
What is the cutout size for the 6.5" speakers?
A shopper
on Nov 23, 2017
BEST ANSWER: The Specs section of the product page shows that the cutout is ø8.07" (ø205mm).
- Reply
- Inaccurate
- Dave L Staff on Nov 28, 2017
BEST ANSWER: The Specs section of the product page shows that the cutout is ø8.07" (ø205mm).
- Reply
- Inaccurate
- Dave L Staff on Nov 28, 2017
Vote for the best answer above!
What is the cutout size for the 6.5" speakers?
A shopper
on Nov 23, 2017
BEST ANSWER: The Specs section of the product page shows that the cutout is ø8.07" (ø205mm).
- Reply
- Inaccurate
- Dave L Staff on Nov 28, 2017
BEST ANSWER: The Specs section of the product page shows that the cutout is ø8.07" (ø205mm).
- Reply
- Inaccurate
- Dave L Staff on Nov 28, 2017
Vote for the best answer above!
What is the Qes for these speakers? Need it for building the correct box size.
A shopper
on Apr 11, 2018
BEST ANSWER: We do not have a Qes measurement. We do have the Qts for this model which is 0.495.
- Reply
- Inaccurate
- Dave L Staff on Apr 16, 2018
BEST ANSWER: We do not have a Qes measurement. We do have the Qts for this model which is 0.495.
- Reply
- Inaccurate
- Dave L Staff on Apr 16, 2018
Vote for the best answer above!
Has anyone used the tweeter Swivel? I don't want to break the speaker, the tweeter does not seem to move.
A shopper
on Jun 15, 2018
BEST ANSWER: When the tweeter has been sitting dormant for a while it will be difficult to move. The housing is pretty strong for you to apply a little more pressure to get it loose.
- Reply
- Inaccurate
- Dave L Staff on Jun 19, 2018
BEST ANSWER: When the tweeter has been sitting dormant for a while it will be difficult to move. The housing is pretty strong for you to apply a little more pressure to get it loose.
- Reply
- Inaccurate
- Dave L Staff on Jun 19, 2018
Vote for the best answer above!
I am hoping to replace the rear speakers in my Monoprice Premium 5.1 Home Theater System (#10565) with a pair of in-ceiling speakers. What size or model of these speakers would best match what I already have?
A shopper
on Jan 2, 2019
Monoprice Caliber In-Ceiling Speakers, 6.5in Fiber 2-Way (pair)
Monoprice Caliber In-Ceiling Speakers, 5.25in Fiber 2-Way (pair)
Monoprice Caliber In-Ceiling Speakers, 8in Fiber 2-Way (pair)
Monoprice Premium 5.1-Channel Home Theater System with Subwoofer
BEST ANSWER: I would use the 5.25" to match the other speakers.
- Reply
- Inaccurate
- Dave L Staff on Jan 2, 2019
Monoprice Caliber In-Ceiling Speakers, 5.25in Fiber 2-Way (pair)
BEST ANSWER: I would use the 5.25" to match the other speakers.
- Reply
- Inaccurate
- Dave L Staff on Jan 2, 2019
Monoprice Caliber In-Ceiling Speakers, 5.25in Fiber 2-Way (pair)
Vote for the best answer above!
Will these work as left and right speakers in a 5.1.2 setup? Are they thin enough to fit inside 2x4 stud bays?
A shopper
on Mar 18, 2019
BEST ANSWER: Yes, the full specs section of the product page shows the are only 2.8" deep.
- Reply
- Inaccurate
- Dave L Staff on Mar 18, 2019
BEST ANSWER: Yes, the full specs section of the product page shows the are only 2.8" deep.
- Reply
- Inaccurate
- Dave L Staff on Mar 18, 2019
Vote for the best answer above!
I am working on a multi room system. I want to have 4 speakers each in Zone 1 & Zone 2 and have 2 speakers each in Zone 3 & Zone 4. I want to keep remaining two zones for future use. I read in previously answered Q&As that these systems can have 4 speakers in each zone. So I am assuming that is not a problem.
Can someone help me understand how ceiling speakers are to be installed for this application.?I am considering either Monoprice aria or caliber in-ceiling speakers. Do I need to buy anything except the speakers and 14AWG CL2 Rated 2-Conductor Speaker Wire? Any other equipment needed to install/secure the speakers?
My house will be framed soon and answer to this question will help me finalize the equipment.
Can someone help me understand how ceiling speakers are to be installed for this application.?I am considering either Monoprice aria or caliber in-ceiling speakers. Do I need to buy anything except the speakers and 14AWG CL2 Rated 2-Conductor Speaker Wire? Any other equipment needed to install/secure the speakers?
My house will be framed soon and answer to this question will help me finalize the equipment.
New User U
on Nov 21, 2019
Monoprice Caliber In-Ceiling Speakers, 6.5in Fiber 2-Way (pair)
Monoprice 6-Zone Home Audio Multizone Controller and Amplifier Kit, NO LOGO
Monoprice Aria Ceiling Speakers 6.5in Polypropylene 2-Way (pair)
BEST ANSWER: You only need to wire the speakers to the unit. Separate cat-5 cable for the control box of course.
- Reply
- Inaccurate
- Leonard C on Feb 24, 2020
- Purchased on Aug 7, 2019
BEST ANSWER: You only need to wire the speakers to the unit. Separate cat-5 cable for the control box of course.
- Reply
- Inaccurate
- Leonard C on Feb 24, 2020
- Purchased on Aug 7, 2019
Vote for the best answer above!
I have installed this multizone conroller with Caliber in ceiling speaker (Product # 4103). I understand how to connect 1 or 2 of these speakers in a zone. Can I connect 3 or speakers in a zone? These speakers do not cover a large area.
New User U
on Jun 8, 2020
Monoprice Caliber In-Ceiling Speakers, 6.5in Fiber 2-Way (pair)
Monoprice 6-Zone Home Audio Multizone Controller and Amplifier Kit, NO LOGO
BEST ANSWER: Will work just fine the unit will just put out certain watts so too many on a zone may get week.
- Reply
- Inaccurate
- Cory D on Aug 10, 2021
BEST ANSWER: Will work just fine the unit will just put out certain watts so too many on a zone may get week.
- Reply
- Inaccurate
- Cory D on Aug 10, 2021
Vote for the best answer above!
Questions For Similar Products
Reviews
4.8 / 5.0
549 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
469
61
12
4
3
Rated 3 out of 5
They need a box
I purchased the 8" model for the bass, and I installed them in the ceiling that opens to a large attic space. They sounded like crap, all tinny uppers, super muddy mids and no bass. I made sure the treble was set to -6, and made a small enclosure out of cardboard about the size of the one monorpice sells. This sounded slightly better, a bit more bass and mids but didn't help the highs. Since I cut big holes in my ceiling and couldn't find speakers in my price range that would fit, I decided to experiment. Pull the specs from the site and plugging them into a speaker box app, this speaker needs at least a 0.8cuft sealed box, so I made one of cardboard in tube form, taped it to the speaker basket and shoved that into the hole in my ceiling. This made a noticeable difference in every aspect. Actual bass, mids that are clear and that compensated for the screechy highs. This explains the praise from so many about how good they sound in finished basements or ceilings that don't have a lot of open-air attic space. Still, they're not great speakers, but for the money, I'm willing to experiment. The speaker covers are on them so they blend in pretty well at this point. When it cools down again, I'll go up there (the attic) and build a ported box and play with that.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
May 8, 2024
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Highly recommend! Two thumbs up
Cannot beat the value for these speakers. They sound great and the longer you break them in, the better they seem to sound. Very full and rich sound.
Added Feb 13, 2023
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
In ceiling Speaker purchase
Very good quality product
Competitive price
Very professional organization
Everything went smooth to timely shipping to my installation and activation of speakers
??????????
Thank you ??
Competitive price
Very professional organization
Everything went smooth to timely shipping to my installation and activation of speakers
??????????
Thank you ??
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 1 out of 5
- Was this review helpful? Yes (0) No (7)
- Flag as Inappropriate
Rated 5 out of 5
Great surround speakers
Great sounding speakers. Purchased for a 15 x 17 living room. Im running them on on Yamaha RXV surround receiver with a Polk sub. Do yourself a favor and purchase the poly covers from Monoprice to keep the insulation out of them.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Best decision
Flawless speakers fir the price.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (3)
- Flag as Inappropriate
Rated 5 out of 5
Caliber 8" In Ceiling.
I saw the reviews and took a chance - these are great speakers for the money. I wired for 7.1 . I have only installed two above the couch so far and they sound fantastic! The family loves the sound and my wife loves not having wires and speakers on the floor.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
August 17, 2020
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
These speakers sound very nice and very affordable. I would definitely recommend these speakers for your whole home system.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products