Monoprice Caliber In-Wall Speakers, 6.5in Fiber 2-Way (pair)
Product # 4100
UPC # 844660041009
$99.99
*Affirm is not available for business or international orders
Qty: 1
$99.99
Qty: 2-9
$97.89
Qty: 10-19
$97.19
Qty: 20-49
$96.49
Qty: 50+
$95.79
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 52 questions
Browse 52 questions
and 172 answers
Is the mounting parts included and easy to install?
Larry O
on Nov 24, 2018
BEST ANSWER: Yes, all mounting hardware is included and ready to go. Hole cutting and running wires is difficult. Mounting these speakers is easy.
- Reply
- Inaccurate
- Dave L Staff on Nov 29, 2018
BEST ANSWER: Yes, all mounting hardware is included and ready to go. Hole cutting and running wires is difficult. Mounting these speakers is easy.
- Reply
- Inaccurate
- Dave L Staff on Nov 29, 2018
There are mounting hinges on the back, you cut the hole in the wall to the correct size (a cardboard template is included) then from the speaker remove the front mesh and this gives you access to the screws. Insert the speaker into the wall and tighten the screws to mount it in place. Place the mesh cover back on and DONE!!!
Super easy to install. I did about 8 speakers in an office within just a few hours.
Super easy to install. I did about 8 speakers in an office within just a few hours.
- Reply
- Inaccurate
- Josue N on Nov 29, 2018
- Purchased on Jul 16, 2018
Easy...if you can cut sheet rock, and attach wires your done. You dont need mounting parts. Comes with a template to cut the sheet rock hole. Use a stud finder to see where the wall studs are. You attach your speaker wires to the terminals on the speaker, pop it in the wall. Tighten the four screws in the speaker, which lock the speaker in place.
- Reply
- Inaccurate
- Alfred V on Nov 29, 2018
- Purchased on Feb 13, 2018
The brackets are included. Easy—That depends on your skill level at cutting an accurate hole and having nothing in the wall cavity (pipes/wires) to interfere. The actual mounting is easy enough—turning/tightening phillips head screws.
- Reply
- Inaccurate
- dale l on Nov 29, 2018
- Purchased on Mar 11, 2018
The answer is yes! The mounting tab are integral to the speaker housing. You simply flip the tabs behind the sheet rock or substrate you are mounting to and tighten the screws from the face of the speaker.
- Reply
- Inaccurate
- John H on Nov 30, 2018
- Purchased on Mar 11, 2018
They are turn screws that have a plastic piece on the back to pinch the drywall (like a plastic electrical outlet box). It's easy, you just have to be a bit careful with them that you don't overturn them.
- Reply
- Inaccurate
- Jeffrey L on Nov 30, 2018
- Purchased on Mar 25, 2018
The mounting cams are part of the speaker itself. Make sure they are all straight up and down and slowly tighten the screws and they will tighten on the opening.
- Reply
- Inaccurate
- ERIC W on Nov 29, 2018
- Purchased on Mar 19, 2018
Yes, the screws are integral to the frame. Careful if using power screwdriver (drill) as mounting parts not super high quality, screws can strip out.
- Reply
- Inaccurate
- Andy K on Nov 30, 2018
- Purchased on May 29, 2018
The mounting parts are built into the speaker. Basically there are some wings that twist behind the Sheetrock/wallboard to hold it in place.
- Reply
- Inaccurate
- Brent S on Nov 29, 2018
- Purchased on Jan 6, 2018
Yes, very simple and straight forward ,after cutting the hole using the supplied template it took about ten minutes to mount
- Reply
- Inaccurate
- Richard B on Nov 29, 2018
- Purchased on Jun 11, 2018
Yes, all mounting hardware is included. They are as easy to mount as any of the several brands I have installed in the past.
- Reply
- Inaccurate
- Mark H on Nov 29, 2018
- Purchased on Apr 7, 2018
Yes, everything is included and they’re very easy to install.
- Reply
- Inaccurate
- Jeff J on Nov 29, 2018
- Purchased on Mar 24, 2018
Vote for the best answer above!
Are they closed enclosure?
A shopper
on Sep 24, 2018
BEST ANSWER: No these are In Wall Speakers which don't have enclosures. The wall cavity between the studs becomes the enclosure. And by the way, these are a real bargain and have a great WAF (Wife Acceptance Factor).
- Reply
- Inaccurate
- James McDonnell I on Sep 25, 2018
- Purchased on Nov 24, 2017
BEST ANSWER: No these are In Wall Speakers which don't have enclosures. The wall cavity between the studs becomes the enclosure. And by the way, these are a real bargain and have a great WAF (Wife Acceptance Factor).
- Reply
- Inaccurate
- James McDonnell I on Sep 25, 2018
- Purchased on Nov 24, 2017
The speaker isn't built into a "box", if that's what you mean. They are open in back and on the sides.
- Reply
- Inaccurate
- Thomas on Sep 25, 2018
- Purchased on Dec 2, 2017
No enclosure, it fits between the wall studs. These are great speakers. Easy to install.
- Reply
- Inaccurate
- Terri R on Sep 25, 2018
- Purchased on Jan 17, 2018
they are open you can Frame and install insulation foam in the Area .
- Reply
- Inaccurate
- Jorge N on Sep 25, 2018
- Purchased on Jan 4, 2018
No, the back magnet will be open inside the wall.
- Reply
- Inaccurate
- SEJAL PATEL on Sep 24, 2018
- Purchased on Jan 1, 2018
These are open in the rear - no enclosure.
- Reply
- Inaccurate
- rubenr_ca on Sep 25, 2018
- Purchased on Jan 26, 2018
No - they are open-back speaker plates.
- Reply
- Inaccurate
- Ronald D on Sep 24, 2018
- Purchased on Nov 19, 2017
Vote for the best answer above!
Can these be mounted in ceiling instead of in-wall?
Connor M
on Aug 7, 2017
BEST ANSWER: I disagree with Gregory S., the attic would provide an "infinite' baffle (provided that there is not the floor of a living space above) making it excellent for bass response. A wall mounting location gives a shallow depth (wood stud is only 3-1/2") causing a great deal of mid-range reflection and the false illusion that the speaker is weak on bass. The only drawback of a ceiling mount is the bleed-over of sound into other rooms., but that would be much worse for a wall-mount installation where there is living space on the other side of a wall-mount speaker.
- Reply
- Inaccurate
- Hector J. R on Feb 14, 2019
BEST ANSWER: I disagree with Gregory S., the attic would provide an "infinite' baffle (provided that there is not the floor of a living space above) making it excellent for bass response. A wall mounting location gives a shallow depth (wood stud is only 3-1/2") causing a great deal of mid-range reflection and the false illusion that the speaker is weak on bass. The only drawback of a ceiling mount is the bleed-over of sound into other rooms., but that would be much worse for a wall-mount installation where there is living space on the other side of a wall-mount speaker.
- Reply
- Inaccurate
- Hector J. R on Feb 14, 2019
Yes. However, if you have a large attic space you may lose some sound quality. These speakers do not have a box behind them. The wall cavity becomes your speaker box.
- Reply
- Inaccurate
- Gregory S on Aug 8, 2017
- Purchased on Oct 25, 2016
I used them in the ceiling for my side surround speakers. You just need to make sure the joists aren't in the way obviously like wall studs.
- Reply
- Inaccurate
- Matthew K on Aug 8, 2017
- Purchased on Aug 12, 2016
Yes they can. Just be careful with the wall tabs that Mount it. They should work.
- Reply
- Inaccurate
- Jennifer J on Aug 8, 2017
- Purchased on Dec 3, 2016
Yes, I have four sets of these speakers and they are all ceiling mounted.
- Reply
- Inaccurate
- Mark K on Aug 8, 2017
- Purchased on Aug 24, 2016
Vote for the best answer above!
Is there anything available to cover the back of the speakers to keep dust and insulation out when mounted in a ceiling?
Keith R
on Jan 10, 2019
Fiberglass batting itself woukd protect against dust infiltration. I suppose if you’re really concerned about it you could use plastic wrap or wrapped insilation, but you woukd likely compromise sound to some extent as they are meant to ‘breath’. They are easy to install and remove, so just experiment!
- Reply
- Inaccurate
- Mike on Jan 12, 2019
You wouldn’t mount these in a ceiling he round ones come with a cap that they would go into. I’ve had no issue with dust of insulation with these in my front facing walls.
- Reply
- Inaccurate
- justin b on Jan 11, 2019
- Purchased on Jul 3, 2018
I don’t think there is a specific baffle available for this speaker, but google speaker baffle and you’ll find a suitable size for these speakers.
- Reply
- Inaccurate
- Mark H on Jan 11, 2019
- Purchased on Apr 7, 2018
Nothing that comes with the speakers.... I usually use a thick blanket of paper backed fiberglass insul.... with the paper facing up....
- Reply
- Inaccurate
- dale l on Jan 11, 2019
- Purchased on Mar 11, 2018
no, the back on these was exposed
- Reply
- Inaccurate
- Josue N on Jan 11, 2019
- Purchased on Jul 16, 2018
Vote for the best answer above!
How do these speakers get power?
New User U
on Feb 9, 2022
Monoprice Caliber In-Wall Speakers, 6.5in Fiber 2-Way (pair)
Monoprice Caliber In-Ceiling Speakers, 6.5in Fiber 2-Way (pair)
Monoprice Caliber In-Wall Center Channel Speaker, Dual 5.25in (single)
BEST ANSWER: They are powered by your amplifier. You must make sure that the impedance of the speaker matches the amplifier setting.
- Reply
- Inaccurate
- Eric F on Feb 9, 2022
BEST ANSWER: They are powered by your amplifier. You must make sure that the impedance of the speaker matches the amplifier setting.
- Reply
- Inaccurate
- Eric F on Feb 9, 2022
From an amplifier via speaker wires usually routed inside the walls.
- Reply
- Inaccurate
- David C B on Feb 9, 2022
They don’t need power. The power comes from the audio signal.
- Reply
- Inaccurate
- Beau F on Feb 9, 2022
- Purchased on Apr 4, 2021
From a stereo or surround receiver
- Reply
- Inaccurate
- Christopher K on Feb 9, 2022
- Purchased on Feb 14, 2021
Vote for the best answer above!
Will mounting these speakers horizontally (vs vertically) in a 5.1 surround setup have any affect on soundstage or sound quality?
Mary C
on Sep 2, 2017
BEST ANSWER: It depends on what you're trying to accomplish. Where are the rest of the speakers in your system going to be placed? I have a Dolby Atmos receiver so mounting speakers in the ceiling works good for that. So to answer your question the quality stays the same it's just a matter of where you want to hear the sound coming from. Do you want it coming from above down to you or circling around you. That's what has to be determined.
- Reply(1)
- Inaccurate
- Matthew J on Sep 2, 2017
- Purchased on Feb 5, 2017
BEST ANSWER: It depends on what you're trying to accomplish. Where are the rest of the speakers in your system going to be placed? I have a Dolby Atmos receiver so mounting speakers in the ceiling works good for that. So to answer your question the quality stays the same it's just a matter of where you want to hear the sound coming from. Do you want it coming from above down to you or circling around you. That's what has to be determined.
- Reply(1)
- Inaccurate
- Matthew J on Sep 2, 2017
- Purchased on Feb 5, 2017
It probably will not matter much. The tweeter placement is most critical, so try to keep them in the most advantageous mosition for your system and room. I’d recommend “flipping” them tweeters in/tweeters out to see what sounds best. (I’d do the same up/ down if I was mounting them vertically.)
- Reply
- Inaccurate
- Mike on Jan 12, 2019
It won't affect the sound stage significantly because the tweeters are aimable. Take off the grille and aim the tweeter where you want it. When we used these as surrounds, we aimed the tweeters as far apart as possible for greatest sound separation.
- Reply
- Inaccurate
- Aaron G on Jan 21, 2019
- Purchased on Dec 19, 2017
Vote for the best answer above!
I read the grills can be painted, but what about the frame? can these be painted so they match the grill and wall colors?
Chris C
on Dec 3, 2017
BEST ANSWER: I currently have these speakers in my house, The frame is just plastic, and if you mask off the speakers, just leaving the frame exposed, and with the correct spray paint, you should be fine.
- Reply
- Inaccurate
- Clint R on Dec 4, 2017
- Purchased on Dec 14, 2016
BEST ANSWER: I currently have these speakers in my house, The frame is just plastic, and if you mask off the speakers, just leaving the frame exposed, and with the correct spray paint, you should be fine.
- Reply
- Inaccurate
- Clint R on Dec 4, 2017
- Purchased on Dec 14, 2016
Yes, they can be painted. I painted mine and they look good.
- Reply
- Inaccurate
- Jennifer J on Dec 3, 2017
- Purchased on Dec 3, 2016
Vote for the best answer above!
Can this (7607) be used as a center speaker coupled with 4100 on the left and right?
A shopper
on Mar 7, 2018
Monoprice Caliber In-Wall Speakers, 6.5in Fiber 2-Way (pair)
Monoprice Caliber In-Wall Speakers 6.5in Fiber 3-Way (pair)
BEST ANSWER: The short answer is Sure it can, you will have to play with the cross over to get the best range for voice.
The cross over has 4 dip switch settings.
The cross over has 4 dip switch settings.
- Reply
- Inaccurate
- Duane R on Mar 8, 2018
- Purchased on Aug 23, 2017
BEST ANSWER: The short answer is Sure it can, you will have to play with the cross over to get the best range for voice.
The cross over has 4 dip switch settings.
The cross over has 4 dip switch settings.
- Reply
- Inaccurate
- Duane R on Mar 8, 2018
- Purchased on Aug 23, 2017
I imagine you could, however, I always use 3-way speakers together.
- Reply
- Inaccurate
- New User U on Mar 7, 2018
- Purchased on Oct 8, 2017
I did not use or explore using the speakers in that format.
- Reply
- Inaccurate
- James N on Mar 8, 2018
- Purchased on Aug 4, 2017
Vote for the best answer above!
I have the 6 zone multi-zone whole home audio kit (10761) in my home. I want to use the RCA outputs from zone 4 and zone 5 to send the line level signals to an amplifier that powers a single speaker (4100) in each of the bathrooms next to those rooms. Will this amplifier receive the two separate RCA inputs from those zones and distribute the powered signal to each of those bathroom speakers in a (stereo combined) mono signal?
Scott D
on Mar 6, 2019
Monoprice Caliber In-Wall Speakers, 6.5in Fiber 2-Way (pair)
Monoprice Commercial Audio 120W 2ch Mixer Amp (No Logo)
Monoprice 6-Zone Home Audio Multizone Controller and Amplifier Kit, NO LOGO
BEST ANSWER: Yes, the commercial amp can be used as a stereo amp or a dual mono amp. Each channel has dual RCA inputs that will sum to mono. Zone 4 stereo RCAs plug into input 1 with dual RCAs and the same for Zone 5 to input 2.
- Reply(1)
- Inaccurate
- Dave L Staff on Mar 8, 2019
BEST ANSWER: Yes, the commercial amp can be used as a stereo amp or a dual mono amp. Each channel has dual RCA inputs that will sum to mono. Zone 4 stereo RCAs plug into input 1 with dual RCAs and the same for Zone 5 to input 2.
- Reply(1)
- Inaccurate
- Dave L Staff on Mar 8, 2019
If you are trying to combine a mono source to one pre output you would just input to say the left channel and the left pre output will be volume controlled via the touch pads. If you parallel the left and right input with the same signal you will have the same signal on both the left and righ pre outputs to go to any 2 channel amplifier you wish. Hope this helps.
- Reply
- Inaccurate
- Mark W on Mar 8, 2019
I am an audio engineer and this question is confusing to me. There’s no such thing as a stereo combined mono signal.
You have two rooms ( zone 4 and zone 5) you want the line level (pre amp) output to go to a separate powered speaker in the bathrooms? Which amplifier are you asking about? The 6 zone or single amp powering the bathroom speakers?
You have two rooms ( zone 4 and zone 5) you want the line level (pre amp) output to go to a separate powered speaker in the bathrooms? Which amplifier are you asking about? The 6 zone or single amp powering the bathroom speakers?
- Reply(1)
- Inaccurate
- Michael G on Mar 8, 2019
Vote for the best answer above!
Magnetic Shielding vs No Magnetic shielding: What is the difference? I am looking at Monoprice In-Wall Speakers, 6.5 Fiber 2 Way replacing a set of speakers rated at 6 ohms Impedance and 130 max power with a frequency response of 55 Hz to 50 kHz
Stewart
on Oct 7, 2019
BEST ANSWER: Shielding was more important with old crt TVs. With how far in walls are likely to be from any equipment, I wouldn't worry about it. BTW I have 2 pair 6" and 8" each paralleled at 4 ohm with my integra 50.5 and it doesn't break a sweat.
- Reply(1)
- Inaccurate
- Wendy R on Oct 7, 2019
BEST ANSWER: Shielding was more important with old crt TVs. With how far in walls are likely to be from any equipment, I wouldn't worry about it. BTW I have 2 pair 6" and 8" each paralleled at 4 ohm with my integra 50.5 and it doesn't break a sweat.
- Reply(1)
- Inaccurate
- Wendy R on Oct 7, 2019
Magnetic shielding is only an issue when used around a source of noisy electromagnetic interference. Traditionally this included CRT televisions. If you have a modern flat screen there is no need for the shielded version.
- Reply(1)
- Inaccurate
- Matthew J on Oct 7, 2019
- Purchased on Oct 23, 2018
Not sure how to answer that question,I just replaced an older pair of theses with the new ones and can’t tell the difference
- Reply
- Inaccurate
- Rizzo on Oct 7, 2019
Vote for the best answer above!
how to install speaker wire to back of in wall speaker ?
A shopper
on Dec 1, 2016
BEST ANSWER: There are multiple DIY helper sites that can assist. Be aware of building codes in your area.
- Reply
- Inaccurate
- Dave L Staff on Dec 1, 2016
BEST ANSWER: There are multiple DIY helper sites that can assist. Be aware of building codes in your area.
- Reply
- Inaccurate
- Dave L Staff on Dec 1, 2016
Install the speaker wire to the speaker before fastening to the wall
- Reply
- Inaccurate
- dom d on Feb 27, 2018
- Purchased on Feb 7, 2018
Vote for the best answer above!
I want to buy the 5.25" rectangular speaker - item 4099 - which requires a cutout dimension of 6.10". I have 6.25" available between studs, so no problem with the cutout size. However, some reviews talk about a plastic mounting clip that must protrude 3/4" or so beyond the cutout size. Can someone please confirm if I can install these with only 6.25" available between studs?
Timothy B
on Oct 9, 2017
BEST ANSWER: Thank you for your interest in the in-wall speaker. The Dogears will extend an additional 1/2" for both sides of the speaker. Your 6.25" area may not be enough.
- Reply
- Inaccurate
- Dave L Staff on Oct 16, 2017
BEST ANSWER: Thank you for your interest in the in-wall speaker. The Dogears will extend an additional 1/2" for both sides of the speaker. Your 6.25" area may not be enough.
- Reply
- Inaccurate
- Dave L Staff on Oct 16, 2017
The little tabs do extend out beyond the speaker cutout in order to grab the drywall. You’re going to have problems installing in a 6.25” bay. There likely won’t be enough drywall to grab onto, and the speakers could pull out as a result. You could cut the stud. Or even like chisel into the stud a little bit to get that extra half inch you will need. Or get crazy and construction adhesive behind the bezel of the speaker and to just glue it to the face of the drywall. Or get a different speaker.
- Reply
- Inaccurate
- Nicholas S on Oct 17, 2017
- Purchased on Feb 2, 2017
Vote for the best answer above!
Do Alpha and Aria speakers have the same pattern and style on their grill cover?? I'm thinking Alpha in wall speakers and Aria in wall subwoofer but want them to look the same. Thanks, Jeff
A shopper
on Dec 28, 2018
BEST ANSWER: The bezels for Aria and Alpha are different. the Aria bezel is about 1/2" thick. The Alpha has almost no bezel. I would use the Caliber or Alpha Subs to match the look of the Alpha in-walls.
- Reply
- Inaccurate
- Dave L Staff on Jan 2, 2019
Monoprice Caliber In-Wall Speaker 10in Fiber 300W Subwoofer (each)
Monoprice Alpha In-Wall Speaker 10in Carbon Fiber 300W Subwoofer (each)
BEST ANSWER: The bezels for Aria and Alpha are different. the Aria bezel is about 1/2" thick. The Alpha has almost no bezel. I would use the Caliber or Alpha Subs to match the look of the Alpha in-walls.
- Reply
- Inaccurate
- Dave L Staff on Jan 2, 2019
Monoprice Caliber In-Wall Speaker 10in Fiber 300W Subwoofer (each)
Monoprice Alpha In-Wall Speaker 10in Carbon Fiber 300W Subwoofer (each)
Hey Jeff, yes the grill is the same for all their products....also you want to let you know...they all sound amazing. I have done 3 HT system using these speakerer and my customers are amazed. And the low price really helps me beat the competition when it comes to total price package. If this is your first time using then you will be very happy
- Reply
- Inaccurate
- Stevaughn J on Dec 28, 2018
Vote for the best answer above!
What center channel speakers would you recommend if I use your Monoprice caliber 6.5in model #4100 as left and right sprakers?
A shopper
on Dec 20, 2021
BEST ANSWER: I used these as surround speakers so I cannot speak directly to the center channel. If I remember correctly they have a matching horizontal center or buy another pair and use one as a matching center so all 3 are matching.
- Reply
- Inaccurate
- Eric H on Dec 20, 2021
BEST ANSWER: I used these as surround speakers so I cannot speak directly to the center channel. If I remember correctly they have a matching horizontal center or buy another pair and use one as a matching center so all 3 are matching.
- Reply
- Inaccurate
- Eric H on Dec 20, 2021
I’m currently using Pioneer SP-C22 Andrew Jones Home Audio Center Channel Speaker. Awesome sound and clarity.
- Reply
- Inaccurate
- Louis J on Dec 20, 2021
- Purchased on Aug 19, 2021
Vote for the best answer above!
I want to replace my in walls for these. The ones i have are (10.79 x 7.64 in cut out) and (11.93 x 8.78 x 3.58 in external dimension) Will these be a direct fit?
Riz P
on Feb 5, 2017
BEST ANSWER: Thanks for your interest in our speakers. The specs show Cut-out Dimensions as 10.7" x 7.3". Overall is 12" x 8.7". You should be good for direct replace.
- Reply
- Inaccurate
- Dave L Staff on Feb 9, 2017
BEST ANSWER: Thanks for your interest in our speakers. The specs show Cut-out Dimensions as 10.7" x 7.3". Overall is 12" x 8.7". You should be good for direct replace.
- Reply
- Inaccurate
- Dave L Staff on Feb 9, 2017
Vote for the best answer above!
How much do these speakers weigh individually?
Lionel F
on Mar 1, 2017
BEST ANSWER: The speakers would weight about 4.5 lbs. each.
- Reply
- Inaccurate
- Tyler C Staff on Feb 12, 2019
BEST ANSWER: The speakers would weight about 4.5 lbs. each.
- Reply
- Inaccurate
- Tyler C Staff on Feb 12, 2019
Vote for the best answer above!
Can you get replacement grills?
A shopper
on Aug 25, 2017
BEST ANSWER: Thank you for your interest in this in-wall speaker. At this time we do not offer replacement grills.
- Reply
- Inaccurate
- Dave L Staff on Aug 29, 2017
BEST ANSWER: Thank you for your interest in this in-wall speaker. At this time we do not offer replacement grills.
- Reply
- Inaccurate
- Dave L Staff on Aug 29, 2017
Vote for the best answer above!
What are the mounting depth of the different speakers? I am mounting into a shallow wall, and want to be sure of their mounting depth.
James D
on May 22, 2018
BEST ANSWER: All of our in-wall speaker have cutout dimensions and depth in the Full Specs section of the product page. This model is 2.99"
- Reply
- Inaccurate
- Dave L Staff on May 22, 2018
BEST ANSWER: All of our in-wall speaker have cutout dimensions and depth in the Full Specs section of the product page. This model is 2.99"
- Reply
- Inaccurate
- Dave L Staff on May 22, 2018
Vote for the best answer above!
crossover: can you provide specs or a picture of the back at least? what exactly does the tweeter switch do?
A shopper
on May 30, 2018
BEST ANSWER: There is a crossover picture on the product page. The switch attenuates the tweeter by -3 or -6db to compensate for lively rooms.
- Reply
- Inaccurate
- Dave L Staff on Jun 1, 2018
BEST ANSWER: There is a crossover picture on the product page. The switch attenuates the tweeter by -3 or -6db to compensate for lively rooms.
- Reply
- Inaccurate
- Dave L Staff on Jun 1, 2018
Vote for the best answer above!
Can you get replacement mounting parts if you lose the back pieces in the wall from unscrewing too far?
New User U
on May 7, 2020
BEST ANSWER: you could use a little piece of wood as a replacement too.
- Reply
- Inaccurate
- Zach E on May 7, 2020
BEST ANSWER: you could use a little piece of wood as a replacement too.
- Reply
- Inaccurate
- Zach E on May 7, 2020
Vote for the best answer above!
I'll be installing these in a new build shop ceiling that will have blown in insulation. What size enclosure would be needed for optimal sound? The ceiling joists are 2x10.
Doug J
on Sep 29, 2021
What is the max thickness of the wall that these in-wall speakers, model 4100, 4101, and 7607, can clip onto? I have double drywall (1/2" each), so the clips need to be able to handle a 1" wall.
Will the 4101 (2 ways 8" woofer) model fit in regular 2x4 stud walls?
Will the 4101 (2 ways 8" woofer) model fit in regular 2x4 stud walls?
Heng Wan L
on Dec 23, 2021
Monoprice Caliber In-Wall Speakers, 6.5in Fiber 2-Way (pair)
Monoprice Caliber In-Wall Speakers, 8in Fiber 2-Way (pair)
Monoprice Caliber In-Wall Speakers 6.5in Fiber 3-Way (pair)
Questions For Similar Products
Reviews
4.7 / 5.0
305 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
255
36
6
5
3
Rated 1 out of 5
Failed Speaker
I purchased these in October of 2022, but didn't install them until the spring of 2023. They have been installed for less than a year and the tweeter has already failed on one of them.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
February 12, 2024
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Nice speakers easy install.
Easy install. Simply used the enclosed template placed on a level line drawn at the desired height to trace the required opening. Then cut the opening. Hooked up the wires and placed in opening. Locking tabs hold it in place When the 6 screws are rotated clockwise.
As far as sound goes, I'm not an audiophile, but they sound great to me. These replaced an older pair and they sound much better than those.
As far as sound goes, I'm not an audiophile, but they sound great to me. These replaced an older pair and they sound much better than those.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Great quality construction cannot wait to hear them in the 7.1 system
Still in the process of building my home cinema but will send photos once it is accomplished .
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Delivered as expected. A very good value.
Nice for the money.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Better than expected
Paired with the matching center channel and a sub.
The weak point is the sub, followed by these speakers. They are mediocre compared to some high end wall speakers, and not close to the high-end cabinet speakers they replaced, but let me just say that these are cheap, two-way wall speakers, and in that respect, I didn't expect much. However, these speakers are really DECENT. They are clear, have no distortion that I can hear at uncomfortably loud volumes, and don't have any of that "tin-can" sound quality that your TV speakers (or cheap bluetooth speakers) have... and paired with the matching center channel speaker, which has more bass and sounds even better with the highs too, the aggregate sound quality is really clear and immersive. The sound really fills my small room with the 3-way speakers and a cheap sub.
I want to get a better sub for my setup, not for cheap they kind of cheap "boom-boom" that you just feel but a bass that fills in the sound with deep soundwaves that you actually hear instead of just shaking your walls. That's what this system needs, just a good sub, and it will sound like a high-end system.
The weak point is the sub, followed by these speakers. They are mediocre compared to some high end wall speakers, and not close to the high-end cabinet speakers they replaced, but let me just say that these are cheap, two-way wall speakers, and in that respect, I didn't expect much. However, these speakers are really DECENT. They are clear, have no distortion that I can hear at uncomfortably loud volumes, and don't have any of that "tin-can" sound quality that your TV speakers (or cheap bluetooth speakers) have... and paired with the matching center channel speaker, which has more bass and sounds even better with the highs too, the aggregate sound quality is really clear and immersive. The sound really fills my small room with the 3-way speakers and a cheap sub.
I want to get a better sub for my setup, not for cheap they kind of cheap "boom-boom" that you just feel but a bass that fills in the sound with deep soundwaves that you actually hear instead of just shaking your walls. That's what this system needs, just a good sub, and it will sound like a high-end system.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Set these up in my son's Room and I was really impressed with the sound
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Great speakers
These speakers replace a set from Boston Acoustics. These are so much better, there is simply no comparison. I would like to replace my center channel also, but Monoprice has not yet responded about what is the best match for my system.
Added Dec 7, 2020
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Great audio
Bought these speakers for our new house. These sound great for the installed surround sound system.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Great for atmos!
I purchased these speaker for atmos configuration in my home theater. I went with this design versus round since there were already this style hole cut in my ceiling. They sound great for atmos speakers, can't speak for them as a main.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products