Monolith by Monoprice 24in Speaker Stand, Cherry (Each)
Product # 39168
UPC # 889028133309
$69.99
*Affirm is not available for business or international orders
- FREE STANDARD US SHIPPING
- Eligible for Coupon(s) MP15
Qty: 1
$69.99
Qty: 2-9
$69.29
Qty: 10-19
$68.59
Qty: 20-49
$67.89
Qty: 50+
$67.19
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 37 questions
Browse 37 questions
and 70 answers
Do you mount speakers to the plate?
A shopper
on Dec 16, 2021
BEST ANSWER: The plate is made of steel and powdercoated. The speaker sits on the plate, like you would place the speaker on a table. The plate mounting screws are countersinked into the plate, so they are just below flush with the surface of the plate, and the speaker sits flat on the plate. There are four black foam stick on pads circular 15mm diameter and 2mm thick included. These can be placed on the metal plate, and you could sit the speaker on the foam pads. I have my Yamaha HS8 monitor sitting on the plate without the pads, and the speakers do not have feet. This is wood to metal contact. The speaker is larger than the plate, with about a 5 cm overhang on each side. My stand is the 32 inches tall model. The speakers have been stable. When I bump into them, bump the stand, or press the switch on the back of the speaker, the speakers sometime move around, but they do not fall off. I hope this information helps you!
- Reply
- Inaccurate
- Peter R on Dec 16, 2021
BEST ANSWER: The plate is made of steel and powdercoated. The speaker sits on the plate, like you would place the speaker on a table. The plate mounting screws are countersinked into the plate, so they are just below flush with the surface of the plate, and the speaker sits flat on the plate. There are four black foam stick on pads circular 15mm diameter and 2mm thick included. These can be placed on the metal plate, and you could sit the speaker on the foam pads. I have my Yamaha HS8 monitor sitting on the plate without the pads, and the speakers do not have feet. This is wood to metal contact. The speaker is larger than the plate, with about a 5 cm overhang on each side. My stand is the 32 inches tall model. The speakers have been stable. When I bump into them, bump the stand, or press the switch on the back of the speaker, the speakers sometime move around, but they do not fall off. I hope this information helps you!
- Reply
- Inaccurate
- Peter R on Dec 16, 2021
The speakers sit on top of the plate. The only holes in the top plate are for the screws that hold it on the stand. There are 4 small non-slip dots to put at the corners of the plate.
- Reply
- Inaccurate
- David K on Dec 16, 2021
No. There are four small foam cushions that stick on top of the metal stand. The speaker just sits on top. My speakers weigh about 25 lbs each. It is a very stable platform.
- Reply
- Inaccurate
- Joseph S Bravenec I on Dec 21, 2021
- Purchased on Dec 9, 2021
The stands come with small self-adhesive foam dots to cushion the speakers, but there are no screw holes or similar attachment points.
- Reply
- Inaccurate
- NATHAN B on Dec 16, 2021
There is no built-in method for doing so. Speakers are held in place by gravity. I think that's typical for bookshelf speaker stands.
- Reply
- Inaccurate
- CJ S on Dec 16, 2021
- Purchased on Sep 15, 2021
No speakers are free standing not screwed into plate
These stands are for small surround speakers.
These stands are for small surround speakers.
- Reply
- Inaccurate
- BARRY M on Dec 16, 2021
No, not without your own custom drilling. Instead, stick-on felt pads are provides.
- Reply
- Inaccurate
- Paul C on Dec 16, 2021
No - it's a shelf with rubber grips. Seems unsteady, but I have had no issues.
- Reply
- Inaccurate
- Eric H on Dec 16, 2021
I did not, but there are holes if you want to
- Reply
- Inaccurate
- Robert W on Dec 16, 2021
- Purchased on Jul 25, 2021
Vote for the best answer above!
How tall are these 24" stands with the spikes installed? How much extra height do they add?
James A
on Mar 29, 2022
BEST ANSWER: My spikes on my 33" stands raise it 1.75 inches. Keep in mind these are sold as singles despite being named plural.
- Reply
- Inaccurate
- DUSTIN Duane D on Mar 29, 2022
BEST ANSWER: My spikes on my 33" stands raise it 1.75 inches. Keep in mind these are sold as singles despite being named plural.
- Reply
- Inaccurate
- DUSTIN Duane D on Mar 29, 2022
on the 24" stands with the isolation spikes in place a screwed all the way in, the measurement is 25 1/4" from the floor to the bottom of the speaker
- Reply
- Inaccurate
- Morris S on Mar 30, 2022
The spikes are about 1 to 2inches. I didn't us them as the stand sits on carpeting and they are not needed. Very good quality stands though.
- Reply
- Inaccurate
- DAVID M on Mar 29, 2022
the spikes raise the stand about an inch.
- Reply
- Inaccurate
- Cornelius S on Apr 4, 2022
- Purchased on Oct 7, 2021
The spikes are only an inch or so
- Reply
- Inaccurate
- David O on Mar 29, 2022
- Purchased on Feb 13, 2022
Vote for the best answer above!
I have a vinal flooring, I don't want to use the spikes, for fear they will pierce the flooring. What would you recommend? place something between the spikes and floor? But what material would be best for this?
Alan H. purchased Nov 18, 2022
Alan H. purchased Nov 18, 2022
A shopper
on Nov 19, 2022
BEST ANSWER: The spike just screw in and are removable. I dont use them either because the stand sits on carpet. This is a very high quality speaker stand.
- Reply
- Inaccurate
- DAVID M on Nov 20, 2022
BEST ANSWER: The spike just screw in and are removable. I dont use them either because the stand sits on carpet. This is a very high quality speaker stand.
- Reply
- Inaccurate
- DAVID M on Nov 20, 2022
Just don't use the spikes. They come detached and in a parts bag so just don't install them onto the stand.
- Reply
- Inaccurate
- V-Man on Nov 19, 2022
I have hardwood floors. I did not use spike and put thick felt pads on bottom of stands.
- Reply
- Inaccurate
- Thomas Wilhelm I on Nov 19, 2022
- Purchased on Oct 28, 2022
I just used some hard rubber stick-on feet in place of the spikes. They work fine.
- Reply
- Inaccurate
- New User U on Nov 19, 2022
Spikes are optional so you can just not use them and they work perfectly fine.
- Reply
- Inaccurate
- David O on Nov 19, 2022
- Purchased on Feb 13, 2022
Vote for the best answer above!
Yes they wood be but you just need to verify the height of the tweeter to your ear height from your listening position. Other than that, excellent stand for the $$. Be sure to use some form of isolation.
- Reply
- Inaccurate
- James K on Oct 8, 2020
- Purchased on Mar 29, 2020
I think they work nicely as I'm using these stands with my RP600M's. Attractive and well-built stand.
- Reply
- Inaccurate
- Thomas G on Oct 8, 2020
- Purchased on Jan 5, 2020
Probably I had 85th anniversary Y for girls they fit fine
- Reply
- Inaccurate
- Richard M on Oct 8, 2020
Vote for the best answer above!
Vote for the best answer above!
Ask about the material please!? Do i need to put dry sand?
A shopper
on Nov 17, 2019
BEST ANSWER: These wood posts are solid wood and cannot be filled with sand.
- Reply
- Inaccurate
- New User U Staff on Nov 18, 2019
BEST ANSWER: These wood posts are solid wood and cannot be filled with sand.
- Reply
- Inaccurate
- New User U Staff on Nov 18, 2019
Vote for the best answer above!
I would assume so, because we put it on porcelain tile.Enter
- Reply
- Inaccurate
- michele g on Jan 3, 2020
- Purchased on Nov 30, 2019
Vote for the best answer above!
How thick is the steel plate holding the speaker? My bookshelf speakers have a unique bolt pattern underneath for mounting, can I easily drill holes in the plate?
A shopper
on Jan 19, 2020
BEST ANSWER: The top steel plate is high quality and durable, between 1-2/16" thick. You'll need a sharp steel bit and a either a drill press (best) or put some muscule down to drill through. Overall, the stand is very sturdy and holds my 13lb KEF speakers wonderfully. Hopefully you can remove the speaker bolts and allow speaker to sit comfortably on the stand. I do have a 2/16' rubber pad under the speaker to eliminate any vibration or slippage of speaker.
Hope this helps
Hope this helps
- Reply
- Inaccurate
- Gary E on Jan 19, 2020
BEST ANSWER: The top steel plate is high quality and durable, between 1-2/16" thick. You'll need a sharp steel bit and a either a drill press (best) or put some muscule down to drill through. Overall, the stand is very sturdy and holds my 13lb KEF speakers wonderfully. Hopefully you can remove the speaker bolts and allow speaker to sit comfortably on the stand. I do have a 2/16' rubber pad under the speaker to eliminate any vibration or slippage of speaker.
Hope this helps
Hope this helps
- Reply
- Inaccurate
- Gary E on Jan 19, 2020
Measures approx 1/16” should not be a problem to drill
- Reply
- Inaccurate
- Timothy S on Jan 20, 2020
- Purchased on Dec 4, 2019
Vote for the best answer above!
My speakers weigh 32 pounds each. Are these wood stands as stable and rigid as the metal stands?
New User U
on Nov 21, 2022
BEST ANSWER: I would imagine the footprint of the speaker would be relevant here, but these are extremely well build I have four children running around mine, never had a spill. I bought load-bearing Velcro straps to wrap my SVS Ultras to these, very stable on rented carpet without the stabilizers installed.
- Reply
- Inaccurate
- David H on Nov 21, 2022
BEST ANSWER: I would imagine the footprint of the speaker would be relevant here, but these are extremely well build I have four children running around mine, never had a spill. I bought load-bearing Velcro straps to wrap my SVS Ultras to these, very stable on rented carpet without the stabilizers installed.
- Reply
- Inaccurate
- David H on Nov 21, 2022
In a word, “yes”. But a hard bump up against your speakers could still cause a tip over.
- Reply
- Inaccurate
- Stephen H on Nov 21, 2022
Vote for the best answer above!
Are you guys going to be posting specs and details on this item?
A shopper
on Oct 3, 2019
BEST ANSWER: Yes, content and specs will be added soon.
- Reply
- Inaccurate
- New User U Staff on Oct 4, 2019
BEST ANSWER: Yes, content and specs will be added soon.
- Reply
- Inaccurate
- New User U Staff on Oct 4, 2019
Vote for the best answer above!
What is the base and the speaker shelf made of?
A shopper
on Oct 4, 2019
Vote for the best answer above!
Max weight capacity?
A shopper
on Oct 4, 2019
Vote for the best answer above!
Do these arrive fully disassembled, or alternately, can these be disassembled down to isolate the posts themselves, to allow resurfacing/refinishing the wood posts? Thanks!
A shopper
on Jan 6, 2021
Vote for the best answer above!
Is the price shown for each or for a pair?
A shopper
on Jul 28, 2021
BEST ANSWER: Hello, this is for each speaker stand.
- Reply
- Inaccurate
- Angelica C. Staff on Jul 28, 2021
BEST ANSWER: Hello, this is for each speaker stand.
- Reply
- Inaccurate
- Angelica C. Staff on Jul 28, 2021
Vote for the best answer above!
Will the Monoprice Monolith THX 365T mini-tower work with this stand? You'd think with the Monolith name it would.
David W
on Nov 13, 2021
BEST ANSWER: You can measure. .. using the specs.. it might work. I am using for a center channel
Horizontal speaker..
Horizontal speaker..
- Reply
- Inaccurate
- Robert W on Nov 14, 2021
- Purchased on Jul 25, 2021
BEST ANSWER: You can measure. .. using the specs.. it might work. I am using for a center channel
Horizontal speaker..
Horizontal speaker..
- Reply
- Inaccurate
- Robert W on Nov 14, 2021
- Purchased on Jul 25, 2021
Vote for the best answer above!
My speakers are 32 pounds, 20" H x 8" W x 12-1/2" D. Is it possible to have a larger top plate to more fully support the speakers?
New User U
on Nov 21, 2022
BEST ANSWER: The included plate will support the speakers just fine.
- Reply
- Inaccurate
- New User U Staff on Nov 21, 2022
BEST ANSWER: The included plate will support the speakers just fine.
- Reply
- Inaccurate
- New User U Staff on Nov 21, 2022
Vote for the best answer above!
Are there rubber feet for the base to use on wood floor?
A shopper
on Oct 22, 2020
What is the thread size of the adustible spikes?
New User U
on Dec 16, 2021
How tall are these 24" stands with the carpet spikes installed? IOW, how much height do the spikes add?
A shopper
on Mar 29, 2022
What diameter are the threaded part of the spikes? I want to buy some aftermarket pads for them.
A shopper
on Dec 24, 2022
Any chance of getting walnut?
JEFFERY H
on Apr 9, 2023
Questions For Similar Products
Reviews
4.8 / 5.0
23 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
19
4
0
0
0
Rated 5 out of 5
Pleasantly surprised!
They look great, are heavy and sturdy. I really like them for the money!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
32in Cherry Stands
They're beautiful, though I had one come in chipped on the bottum that I plan on hiding. It doesn't look like wood inside, it's pretty much just sawdust. Other than that they're great, I am just not willing to wait on another shippment especially this time of year. I NEED MUSIC!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
December 5, 2022
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
24" Cherry Monitor Stands
The stands worked out perfectly for my Genelec 8030 5" monitors. The quality of the stands were surprisingly well made considering the price point. I've spent three times as much $$$ for stands of equal quality and functionality.
I highly recommend these stands!
I highly recommend these stands!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
High quality. Great look.
The wood is solid and the steel is rigid. Assembly was easy. The adjustable point feet enabled me to level the speaker stands despite a very uneven surface (in an old fireplace).
Added May 13, 2022
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Quality cherry wood stand!
Great natural wood look. Solid construction, attractive, classy design. You can see from the picture that the wood is a little lighter than in the stock photos but for me that?s good. And actually the wood looks very warm and natural.
This is in contrast to another brand that had 8 inch stands where the wood color is an eyesore. It really matters the quality of the veneer and mono price did it right! Yes I recommend!
This is in contrast to another brand that had 8 inch stands where the wood color is an eyesore. It really matters the quality of the veneer and mono price did it right! Yes I recommend!
Looks good in the room. Natural wood appearance.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Response from Monoprice
Wow, we were blown away by your positive words, we really appreciate the time you took to write such a detailed review!
Thank you for choosing Monoprice.
Thank you for choosing Monoprice.
September 20, 2021
Christan Michael R
Rated 5 out of 5
pricey but unique looking
Stands go well in living room and were easy to put together and very sturdy.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Very pleased!
Was really pleased with the speaker scan I like the fact that the wood is not hollow and no need to fill with sand or any nonsense like that they have a good heavy base with them they're sturdy the one thing I wish they would do is give you hardwood floor footers for the speaker stands although they sit well on their own ... Are easy to assemble ... Quick shipping ... Nice product
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Monolith stands look great and are a good deal
These speaker stands look great, they really dress up my Kef R3 speakers and make the setup look so much better. They are very sturdy - the Kefs are heavy speakers. Based on other speaker stand prices Ive seen and what Ive paid for the two sets I had, the Monolith stands are a very good deal. My only suggestion would be to add a way to manage the speaker wire. I attached the speaker wire to the rear post which helps but doest completely hide the wire.
- Was this review helpful? Yes (5) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (5) No (1)
- Flag as Inappropriate
Rated 4 out of 5
Solid for the price point. Color not entirely accurate.
Build quality is pretty good for the price point. Work well with my kef q150s. Would have given 5 stars but was disappointed that the cherry stain is much darker in person than what is shown in the product photos.
Cherry stain next to actual cherry tv console.
- Was this review helpful? Yes (14) No (3)
- Flag as Inappropriate
February 23, 2020
- Was this review helpful? Yes (14) No (3)
- Flag as Inappropriate
Reviews for Similar Products