Monolith by Monoprice Heavy Duty 4 Tier Audio Stand XL, 1" Shelf Thickness, Black
Product # 39165
UPC # 889028133279
$159.99
$179.99
Save $20.00 (11%)
*Affirm is not available for business or international orders
Qty: 1
$159.99
$179.99
Qty: 2-9
$159.99
$178.19
Qty: 10-19
$159.99
$176.39
Qty: 20-49
$159.99
$174.59
Qty: 50+
$159.99
$172.79
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 166 questions
Browse 166 questions
and 387 answers
Does this have spikes on the feet? What are on them?
Fred T
on Jan 25, 2022
BEST ANSWER: No spikes, it has adjustable flat feet that are slightly smaller in diameter than the round legs.
- Reply
- Inaccurate
- Matt K on Jan 25, 2022
- Purchased on May 8, 2021
BEST ANSWER: No spikes, it has adjustable flat feet that are slightly smaller in diameter than the round legs.
- Reply
- Inaccurate
- Matt K on Jan 25, 2022
- Purchased on May 8, 2021
I can’t remember if it came with spikes but there are threaded inserts on the bottom for spikes.
- Reply
- Inaccurate
- Eric M on Jan 25, 2022
- Purchased on Sep 15, 2021
Plastic feet on the bottom. Threaded so you can adjust balance on uneven floors. No spikes.
- Reply
- Inaccurate
- Jason Honeycutt H on Jan 25, 2022
- Purchased on Oct 3, 2021
No spikes. Adjustable screw in caps. Nice racks, i have two.
- Reply
- Inaccurate
- MICHAEL D on Jan 25, 2022
- Purchased on Mar 27, 2021
flat bottoms that you can rotate to make fine adjustments
- Reply
- Inaccurate
- Ilya S on Jan 25, 2022
- Purchased on Nov 10, 2021
the feet are nit spikes. hope that help.
- Reply
- Inaccurate
- Steven D on Jan 25, 2022
- Purchased on May 10, 2021
not spikes, screw-in plastic rounds
- Reply
- Inaccurate
- Robert G on Jan 25, 2022
- Purchased on Oct 12, 2021
Vote for the best answer above!
The schematic says there is 18.9 inches between supports (width) and the "Full specs" tab says there is 20.9 inches between supports; which is correct?
A shopper
on Sep 14, 2021
Monolith by Monoprice Heavy Duty 4 Tier Audio Stand XL, 1" Shelf Thickness, Black
Monolith by Monoprice Heavy Duty 4 Tier Audio Stand XL, 1" Shelf Thickness, Espresso
Monolith by Monoprice Heavy Duty 4 Tier Audio Stand XL, 1" Shelf Thickness, Maple
So they are both correct but measured from different points. From inside edge of support to inside edge of support the width is 18.9 inches. measured from the centerline of each support the width is 20.9 inches. If your component is < 18.9 inches in width you will be able to slide it straight in.
- Reply
- Inaccurate
- John L on Sep 16, 2021
I just took a 19" rackmount bracket and layed it on one of the shelves.
It is just slightly wider than the space between the supports. I'd say
the 18.9" spec is the correct one.
It is just slightly wider than the space between the supports. I'd say
the 18.9" spec is the correct one.
- Reply
- Inaccurate
- Ron H on Sep 16, 2021
- Purchased on Oct 27, 2020
Both, depending how you measure. The inside space measured from support to support is about 18.9 inches. Measurement from center of support to center of support is about 20.9 inches.
- Reply
- Inaccurate
- Allen W on Sep 16, 2021
- Purchased on May 16, 2021
18.9 inches is closest to being correct.
- Reply
- Inaccurate
- David P on Sep 16, 2021
- Purchased on Oct 3, 2020
Vote for the best answer above!
Can you stack multiple units to make a single higher stereo rack?
A shopper
on Oct 11, 2022
BEST ANSWER: Although I have purchased two stands and mixed the heights, I have never tried to build one higher than four shelves. Having said that, you certainly could build one with more than four shelves. The shelves and legs are very sturdy and can definitely hold the additional weight, within reason. These are great, affordable stands. Enjoy!
- Reply
- Inaccurate
- Anthony C on Oct 17, 2022
- Purchased on Feb 19, 2022
BEST ANSWER: Although I have purchased two stands and mixed the heights, I have never tried to build one higher than four shelves. Having said that, you certainly could build one with more than four shelves. The shelves and legs are very sturdy and can definitely hold the additional weight, within reason. These are great, affordable stands. Enjoy!
- Reply
- Inaccurate
- Anthony C on Oct 17, 2022
- Purchased on Feb 19, 2022
If you got 2 of the kids and put them together you could probably get to 7 high.. I don't think that this would be warranted the one chewed but itIf you got 2 of the kids and put them together you could probably get to 7 high.. I don't think that this would be warranty worthy but the construction is so good it would probably be safe.
- Reply
- Inaccurate
- Daniel G on Oct 29, 2022
- Purchased on Jan 31, 2022
Yes, but not all shelf spacers work for this. The shortest ones can only be used on the bottom. I bought 3 and combined them to make 2 racks of varying heights. I really like them. Much cheaper and sturdier than a standard rack and the airflow is good as well.
- Reply
- Inaccurate
- Austin S on Oct 17, 2022
- Purchased on Feb 10, 2022
You can, to some extent, but I wouldn’t recommend it. You could always buy a second rack and use parts from that to add an extra shells. That’s the most I would do, to avoid any potential for the rack tipping over.
- Reply
- Inaccurate
- Arturo G on Oct 11, 2022
- Purchased on May 15, 2022
Should be able to combine. I was able to reconfigure the one unit but did need to add extra pieces from Home depot.
- Reply
- Inaccurate
- Seth P on Oct 17, 2022
- Purchased on Jan 30, 2022
No, I would not recommend doing his.
- Reply
- Inaccurate
- PHIL B on Oct 17, 2022
- Purchased on Jul 21, 2022
Vote for the best answer above!
Are the leg tubes fillable with sand or other dense vibration free material?
Leigh P
on Apr 17, 2020
Monolith by Monoprice Heavy Duty 4 Tier Audio Stand XL, 1" Shelf Thickness, Black
Monolith by Monoprice 4 Tier Audio Stand, 0.60 Shelf Thickness, Black
BEST ANSWER: It has been a while since I assembled my stand. I don't recall that the leg tubes are fillable. What I recall is that the bolts that connect the tubes screw into sealed sockets, so I don't think there is a way to fill the tubes. But even if there are openings you could use to fill the tubes, you'd need to be very careful during assembly to keep from having sand leak out. I'm happy with the stand, but I'm only using it to hold an receiver and a streaming device, so vibration isn't an issue.
- Reply
- Inaccurate
- Stephen G on Apr 17, 2020
- Purchased on Feb 23, 2020
BEST ANSWER: It has been a while since I assembled my stand. I don't recall that the leg tubes are fillable. What I recall is that the bolts that connect the tubes screw into sealed sockets, so I don't think there is a way to fill the tubes. But even if there are openings you could use to fill the tubes, you'd need to be very careful during assembly to keep from having sand leak out. I'm happy with the stand, but I'm only using it to hold an receiver and a streaming device, so vibration isn't an issue.
- Reply
- Inaccurate
- Stephen G on Apr 17, 2020
- Purchased on Feb 23, 2020
I would say no. Lots of open holes and threads going on. Unless you figure out a way to seal them off.
- Reply
- Inaccurate
- New User U on Apr 18, 2020
- Purchased on Mar 6, 2020
possibly through the threaded holes in each one. It is a rock solid shelf, I am super happy with it.
- Reply(1)
- Inaccurate
- Ralph S on Apr 17, 2020
- Purchased on Mar 10, 2020
probably yes, Legs are hollow, leg endcaps are installed during assy
- Reply
- Inaccurate
- thomas f on Apr 18, 2020
- Purchased on Mar 1, 2020
No , Doesn’t need- it’s very stable.
- Reply
- Inaccurate
- thomas t on Apr 17, 2020
- Purchased on Feb 10, 2020
Vote for the best answer above!
I know this stand is adjustable (height). I would like to know the height with three tiers and the height with two tiers?
John L
on Aug 5, 2022
BEST ANSWER: The bottom shelf has a wider gap then the rest of them so that means there are 2 different measurements for both heights you are asking because you can assemble it 2 different ways with the tiers you are asking about. I just measured and if you assemble like the picture with bigger gap at bottom shelf then it measures 23 1/4" to the top of shelf 3 and is 15" to the top of shelf 2. But if you build with just the top 3 shelves and equal distance between shelves then it would be 22" to the top of the third shelf and 13 3/4" to the top of 2 shelf system. Hope that helps, and also you probably have a 1/2" variance with those measurements because it has leg levelers on the bottom which you can adjust or remove completely.
- Reply(1)
- Inaccurate
- William B on Aug 9, 2022
- Purchased on Feb 25, 2022
BEST ANSWER: The bottom shelf has a wider gap then the rest of them so that means there are 2 different measurements for both heights you are asking because you can assemble it 2 different ways with the tiers you are asking about. I just measured and if you assemble like the picture with bigger gap at bottom shelf then it measures 23 1/4" to the top of shelf 3 and is 15" to the top of shelf 2. But if you build with just the top 3 shelves and equal distance between shelves then it would be 22" to the top of the third shelf and 13 3/4" to the top of 2 shelf system. Hope that helps, and also you probably have a 1/2" variance with those measurements because it has leg levelers on the bottom which you can adjust or remove completely.
- Reply(1)
- Inaccurate
- William B on Aug 9, 2022
- Purchased on Feb 25, 2022
3 tiers is 24 1/2 inches. I have mine on carpet with about 200 lbs on it,. Its probably compressing the carpet by 1/4 to 1/2.
2 tiers is 16 1/2 inches.
2 tiers is 16 1/2 inches.
- Reply
- Inaccurate
- MICHAEL L D on Aug 9, 2022
- Purchased on Dec 12, 2021
TWO TIER = approximately 15 inches
THREE TIER = approximately 23 inches
THREE TIER = approximately 23 inches
- Reply
- Inaccurate
- Patrick O on Aug 9, 2022
- Purchased on Jan 14, 2022
Yup! That’s how I’ve had it set up.
- Reply
- Inaccurate
- STURDY on Aug 9, 2022
- Purchased on Dec 12, 2021
Vote for the best answer above!
Is it possible to build this unit without the second shelf from the top? I would like to use it as a printer stand.
A shopper
on Jun 24, 2023
BEST ANSWER: Yes, if you are making it a lower three shelf stand by not using the second shelf from the top and the circular supports The circular supports will not connect one to another without the shelf in between.
- Reply
- Inaccurate
- Kerry M on Jun 24, 2023
- Purchased on Mar 7, 2023
BEST ANSWER: Yes, if you are making it a lower three shelf stand by not using the second shelf from the top and the circular supports The circular supports will not connect one to another without the shelf in between.
- Reply
- Inaccurate
- Kerry M on Jun 24, 2023
- Purchased on Mar 7, 2023
Yes, all of the shelves are modular, meaning you can add or subtract any that you choose. I am using as a media rack and had to remove a shelf to accommodate my receiver height.
- Reply
- Inaccurate
- Chris W on Jun 24, 2023
- Purchased on Sep 1, 2022
Yes, Unit can be built as a 1,2,3,or 4shelf unit.
- Reply
- Inaccurate
- Keith H on Jun 24, 2023
- Purchased on Nov 10, 2022
Yes. You clould send the extra shelf to me! :-)
- Reply
- Inaccurate
- Joy L on Jun 27, 2023
- Purchased on Jun 2, 2022
Yes. I only used 3 of the shelves.
- Reply
- Inaccurate
- Kyle K on Jun 25, 2023
- Purchased on Sep 2, 2022
Vote for the best answer above!
What's the diameter of the legs/feet? - I want to buy furniture coasters to protect my floor.
A shopper
on Jun 7, 2020
BEST ANSWER: I would say 2.5 Inches. This is a great rack. Nice and Sturdy!
- Reply
- Inaccurate
- Harry M on Jun 7, 2020
- Purchased on May 18, 2020
BEST ANSWER: I would say 2.5 Inches. This is a great rack. Nice and Sturdy!
- Reply
- Inaccurate
- Harry M on Jun 7, 2020
- Purchased on May 18, 2020
I use 2.5 inch wood floor sliders and they fit perfectly
- Reply
- Inaccurate
- Alex D on Jun 7, 2020
- Purchased on Dec 15, 2019
They are exactly 2" in diameter. Very nice stand.
- Reply
- Inaccurate
- Guest on Jun 7, 2020
- Purchased on Feb 13, 2020
My tape measure says two inches in diameter.
- Reply
- Inaccurate
- K. W. J on Jun 7, 2020
- Purchased on Apr 13, 2020
Vote for the best answer above!
Is there an option for longer posts to increase distance between shelves?
Ron C
on Apr 26, 2021
BEST ANSWER: It comes with one set of longer posts, but we do not sell those posts separately.
- Reply
- Inaccurate
- New User U Staff on Apr 27, 2021
BEST ANSWER: It comes with one set of longer posts, but we do not sell those posts separately.
- Reply
- Inaccurate
- New User U Staff on Apr 27, 2021
To my knowledge, Monoprice does not offer stand-alone posts in varying sizes. I have purchased 2 of the 4-tier XL stands, and employed the longer posts (for amplifiers) from one unit and installed it on my primary stand. In my case, this configuration works well, allowing one stand to have 2 wider distance shelves. The standard shorter posts installed on the second unit allow plenty of room for other smaller, less heat intensive audio components. You may be interested to know that I was unsuccessful in swapping out posts sported by the less expensive Monoprice stand or competitor units; the interior post diameters did not match or provide the stability I need for my components. As a final note, I absolutely love the performance and appearance of the Monolith 4 Tier Stand, XL.
- Reply
- Inaccurate
- Dan M on May 21, 2021
- Purchased on Sep 30, 2020
Hey Ron, I don't see why not as long as Monoprice offeres longer posts or you can find your own with the proper threadings in the posts and they can hold the weight of yoyr components. When assembling, I remember all the posts looking the same with just the length being different.
- Reply
- Inaccurate
- Reagan P on May 21, 2021
- Purchased on Mar 7, 2020
Vote for the best answer above!
The shelf with the metal support should have 6 holes correct? Mine only has 4.
Alex Y
on Jun 21, 2021
BEST ANSWER: Yes, the 4 Tier Audio Stand XL (Extra Large) reinforced shelf should have six (6) holes. The standard configuration is designed to have the third shelf with six holes immediately above the bottom fourth reinforced shelf with 6 holes. For your reference, the separate amplifier reinforced XL stand has only four (4) holes; it may be that a packing error occurred with your 4-tier XL stand. As you are probably aware, the standard and less expense 4-tier unit has no reinforced shelves and each shelf has 4 holes. I own all 3 Monolith models, and consider them the best value to house audio components.
- Reply
- Inaccurate
- Dan M on Jun 22, 2021
- Purchased on Sep 30, 2020
BEST ANSWER: Yes, the 4 Tier Audio Stand XL (Extra Large) reinforced shelf should have six (6) holes. The standard configuration is designed to have the third shelf with six holes immediately above the bottom fourth reinforced shelf with 6 holes. For your reference, the separate amplifier reinforced XL stand has only four (4) holes; it may be that a packing error occurred with your 4-tier XL stand. As you are probably aware, the standard and less expense 4-tier unit has no reinforced shelves and each shelf has 4 holes. I own all 3 Monolith models, and consider them the best value to house audio components.
- Reply
- Inaccurate
- Dan M on Jun 22, 2021
- Purchased on Sep 30, 2020
You are correct. The bottom shelf, i.e. the one with the metal plate, should have 6 holes, as should the next shelf up from the bottom, to accommodate the 6 posts connecting them. The other two shelves should have 4.
Hope this helps.
Hope this helps.
- Reply
- Inaccurate
- Lew L on Jun 22, 2021
- Purchased on Mar 26, 2021
Yes, the shelf with the support and the one above it ( or below it depending on where you place that shelf) have 6 holes in order to use the leg between the front and rear corners.
- Reply
- Inaccurate
- JOE S on Jun 22, 2021
- Purchased on Mar 29, 2021
Correct. Contact Monoprice with online chat. They will replace the whole unit. I just had the same problem.
- Reply
- Inaccurate
- MICHAEL D on Jun 22, 2021
- Purchased on May 11, 2021
Vote for the best answer above!
can it be used with only 2 shelves?
A shopper
on Feb 3, 2020
BEST ANSWER: Yes
you could put it together with 2 or 3 shelves
Well made and very solid
you could put it together with 2 or 3 shelves
Well made and very solid
- Reply
- Inaccurate
- D R on Feb 4, 2020
- Purchased on Jan 17, 2020
BEST ANSWER: Yes
you could put it together with 2 or 3 shelves
Well made and very solid
you could put it together with 2 or 3 shelves
Well made and very solid
- Reply
- Inaccurate
- D R on Feb 4, 2020
- Purchased on Jan 17, 2020
Yes. I only use 3 shelves and it works just fine.
- Reply
- Inaccurate
- Gustavo G on Feb 3, 2020
- Purchased on Nov 10, 2019
Yes. You can build it however you need to.
- Reply
- Inaccurate
- New User U on Feb 3, 2020
- Purchased on Jan 13, 2020
Vote for the best answer above!
Are there any plan to accessorize this with wheels or that would limit its capability?
New User U
on Apr 24, 2020
Based upon personal communication with the CEO of Monoprice, my understanding is that this cart will soon be accessorized not only with wheels, but also a V8 engine, so you can drive it around the block while listening to your stereo equipment.
- Reply(1)
- Inaccurate
- K. W. J on Apr 24, 2020
- Purchased on Apr 13, 2020
lol! good one! it will work well since I don't have to sit on my wheelchair to move it around. heheheh
- Reply
- New User U on Apr 24, 2020
Look up 2" PU Wheels on Amazon with a 2 inch M8x125 thread bolt.
About $20 for four wheels with locks.
About $20 for four wheels with locks.
- Reply
- Inaccurate
- Gus L on May 20, 2022
Vote for the best answer above!
Can you buy an extra shelf for it with 9" legs?
New User U
on May 5, 2020
BEST ANSWER: We do not currently sell extra shelving or additional legs.
- Reply
- Inaccurate
- New User U Staff on May 5, 2020
BEST ANSWER: We do not currently sell extra shelving or additional legs.
- Reply
- Inaccurate
- New User U Staff on May 5, 2020
I believe the staff has answered the question with a "no". Ref: May 2020 and Apr 2021 FAQ.
- Reply
- Inaccurate
- Dan M on Aug 9, 2021
- Purchased on Sep 30, 2020
Vote for the best answer above!
How would this look on a counter? i want a rack that is off the ground. Would it look ok?
A shopper
on Sep 15, 2020
BEST ANSWER: the stand is almost 3’ tall and depending on the color, with nothing sitting atop the 1st shelf could be quite striking! It’s certainly sturdy enough to hold your audio gear and depending on your counter/ceiling height should work well. Good Luck!
- Reply
- Inaccurate
- Timothy S on Sep 15, 2020
- Purchased on Dec 4, 2019
BEST ANSWER: the stand is almost 3’ tall and depending on the color, with nothing sitting atop the 1st shelf could be quite striking! It’s certainly sturdy enough to hold your audio gear and depending on your counter/ceiling height should work well. Good Luck!
- Reply
- Inaccurate
- Timothy S on Sep 15, 2020
- Purchased on Dec 4, 2019
This is a large audio stand, and is best on it's own. In my opinion it's too large for a counter.
- Reply
- Inaccurate
- Serge R on Sep 15, 2020
- Purchased on Apr 30, 2020
Vote for the best answer above!
Does the 3.8" shelf/tier have to be placed on the bottom, or can it be placed anywhere in the rack?
A shopper
on Aug 12, 2022
BEST ANSWER: It can be placed anywhere! These are essentially modular. You can get more than one, and extend taller, and have a short rack.
- Reply
- Inaccurate
- Wyatt S on Aug 12, 2022
- Purchased on Jun 27, 2022
BEST ANSWER: It can be placed anywhere! These are essentially modular. You can get more than one, and extend taller, and have a short rack.
- Reply
- Inaccurate
- Wyatt S on Aug 12, 2022
- Purchased on Jun 27, 2022
The system is modular so you can assemble the shelves in any order.
- Reply
- Inaccurate
- Peter G on Aug 12, 2022
- Purchased on Mar 13, 2022
Vote for the best answer above!
I need the top shelf to have the 8.9 inch gap, not the bottom. Is it possible to set this stand up that way?
Bradley G
on Nov 11, 2022
BEST ANSWER: Yes it can be done easy like that. The shelve can't be flipped, it has to be with the board one side up always, but what you can do is put the metal round corner tubes at any level you want. In this way you can configure the larger space to be at top, middle or bottom. The tubes are hollow and threaded at both ends and there is a pack of threaded rods. That's why you can make it however you want. I almost put it at the top myself, but my Marantz fits just fine on smaller space.
- Reply
- Inaccurate
- William B on Nov 11, 2022
- Purchased on Feb 25, 2022
BEST ANSWER: Yes it can be done easy like that. The shelve can't be flipped, it has to be with the board one side up always, but what you can do is put the metal round corner tubes at any level you want. In this way you can configure the larger space to be at top, middle or bottom. The tubes are hollow and threaded at both ends and there is a pack of threaded rods. That's why you can make it however you want. I almost put it at the top myself, but my Marantz fits just fine on smaller space.
- Reply
- Inaccurate
- William B on Nov 11, 2022
- Purchased on Feb 25, 2022
It has been awhile since assembly, but if I remember correctly the connections are different. I don’t think rearranging is possible. I think it had something to do with weight distribution. Hope this helps.
- Reply
- Inaccurate
- New User U on Nov 11, 2022
- Purchased on Dec 19, 2021
Yes, the spacers between the shelves can be set up interchangeably.
- Reply
- Inaccurate
- Chris W on Nov 11, 2022
- Purchased on Sep 1, 2022
Vote for the best answer above!
Can you add one or TWO of the XL amp stand shelves to this kit in order to have shorter heights within the stack and reduce overall height? I need 4 or 5 shelves total but some of my gear only needs 4-5 inches between shelves. Ideally I could remove one of the stock shelves and insert two of the amp stand kits. Lastly, if possible, does it matter where in the stack I place these amp stand shelves?
Bruce M
on Jan 20, 2023
Yes, you can mix and match levels and kits. I ordered extra kits in order to have reduced height units. Just beware that bottom shelves have additional holes for the extra support posts so these shelves can't really be used in other positions (or they can but you will have 2 holes in your shelves). I have multiple stands that are 5 shelf and all lower height.
- Reply
- Inaccurate
- Peter G on Jan 25, 2023
- Purchased on Mar 13, 2022
Yes - I believe you can do the combination you describe. The only constraint I see is that the bottom two shelves have special fittings and holes so you will need to start with the third level from the bottom to make your additions.
- Reply
- Inaccurate
- Andy on Jan 25, 2023
- Purchased on May 18, 2022
Vote for the best answer above!
Can set it up with 8.9” space between each shelf?
A shopper
on Aug 10, 2023
BEST ANSWER: Only if you buy more than one and use the 8.9" posts from the second one on the first, The individual posts are not adjustable. So, if you want 8.9" between each shelf you would need three of these to have enough posts.
- Reply
- Inaccurate
- Kerry M on Aug 12, 2023
- Purchased on Mar 7, 2023
BEST ANSWER: Only if you buy more than one and use the 8.9" posts from the second one on the first, The individual posts are not adjustable. So, if you want 8.9" between each shelf you would need three of these to have enough posts.
- Reply
- Inaccurate
- Kerry M on Aug 12, 2023
- Purchased on Mar 7, 2023
The Shelves are fixed height. I do not think there is a realistic way to increase the space between. The top two shelves are 7 inches apart. The bottom. is 8 7/8, i.e., not quite 8.9 inches.
- Reply
- Inaccurate
- Ken O on Aug 10, 2023
- Purchased on Nov 5, 2022
These shelves are not adjustable. There is 7 1/8" between the top 2 shelves and 8 7/8" at the bottom.
- Reply
- Inaccurate
- Brian Yelinko Y on Aug 11, 2023
- Purchased on Mar 16, 2022
Vote for the best answer above!
What is the spacing between shelves?
A shopper
on Oct 2, 2019
Monolith by Monoprice Heavy Duty 4 Tier Audio Stand XL, 1" Shelf Thickness, Black
Monolith by Monoprice Heavy Duty 4 Tier Audio Stand XL, 1" Shelf Thickness, Maple
Monolith by Monoprice Heavy Duty 4 Tier Audio Stand XL, 1" Shelf Thickness, Espresso
BEST ANSWER: Thank you for your question.
The shelves would be 7.25".
The shelves would be 7.25".
- Reply
- Inaccurate
- Tyler C Staff on Oct 8, 2019
BEST ANSWER: Thank you for your question.
The shelves would be 7.25".
The shelves would be 7.25".
- Reply
- Inaccurate
- Tyler C Staff on Oct 8, 2019
According to the specs it says 7.3" x 2 and 8.9" x 1 with the larger one being on the bottom but can be customized to a different location during assembly.
- Reply
- Inaccurate
- Mike D on Nov 12, 2021
Vote for the best answer above!
How do you level the feet on these stands?
A shopper
on Feb 20, 2020
BEST ANSWER: After you assembled the unit, the bottom of the legs are adjustable. Once level, install your components.
- Reply
- Inaccurate
- Ismael G on Feb 20, 2020
- Purchased on Feb 7, 2020
BEST ANSWER: After you assembled the unit, the bottom of the legs are adjustable. Once level, install your components.
- Reply
- Inaccurate
- Ismael G on Feb 20, 2020
- Purchased on Feb 7, 2020
The feet are threaded so you just turn them.
- Reply
- Inaccurate
- Jason F on Feb 27, 2020
- Purchased on Feb 25, 2020
Vote for the best answer above!
Can I leave out a shelf and screw the legs together without the shelf to make a larger openining?
A shopper
on Apr 7, 2020
BEST ANSWER: It’s probably possible but I don’t think it will be as stable depending on the weight you plan to put on it.
- Reply
- Inaccurate
- Gustavo G on Apr 8, 2020
- Purchased on Nov 10, 2019
BEST ANSWER: It’s probably possible but I don’t think it will be as stable depending on the weight you plan to put on it.
- Reply
- Inaccurate
- Gustavo G on Apr 8, 2020
- Purchased on Nov 10, 2019
No, but the bottom shelf has a space of 8.75"
- Reply
- Inaccurate
- Ismael G on Apr 8, 2020
- Purchased on Feb 7, 2020
Vote for the best answer above!
What is the width BETWEEN the support tubes?
New User U
on Jul 8, 2021
BEST ANSWER: It’s 18 1/2 inches by my measurement
- Reply
- Inaccurate
- Stephen M on Jul 8, 2021
- Purchased on Apr 13, 2021
BEST ANSWER: It’s 18 1/2 inches by my measurement
- Reply
- Inaccurate
- Stephen M on Jul 8, 2021
- Purchased on Apr 13, 2021
Vote for the best answer above!
Vote for the best answer above!
This says only 85lbs per shelf but my monolith 7x200 weight is almost 100lbs so you don't sell any stand that can hold it?
Luis G
on Apr 11, 2023
BEST ANSWER: it will hold it. Use the bottom shelf.
- Reply
- Inaccurate
- New User U Staff on Apr 11, 2023
BEST ANSWER: it will hold it. Use the bottom shelf.
- Reply
- Inaccurate
- New User U Staff on Apr 11, 2023
If you read the rack description right here on the Monoprice website it says "the shelf with the support bar can hold up to 150 pounds". You can place the shelf with the support bar at any of the four positions. Total weight capacity for this rack as listed here in the specs is 350 pounds.
- Reply(2)
- Inaccurate
- Rodney Kline O on Apr 14, 2023
- Purchased on Jun 3, 2022
Vote for the best answer above!
What is the difference between XL models and standard models of the Monolith 4-tier audio stand?
A shopper
on Oct 2, 2019
BEST ANSWER: These new stands have shelves that are larger in size, the individual shelves are thicker and sturdier, and there is an support bar that comes included so it can hold up some of the heavier components.
- Reply
- Inaccurate
- New User U Staff on Oct 2, 2019
BEST ANSWER: These new stands have shelves that are larger in size, the individual shelves are thicker and sturdier, and there is an support bar that comes included so it can hold up some of the heavier components.
- Reply
- Inaccurate
- New User U Staff on Oct 2, 2019
Vote for the best answer above!
When will the full description and specs be available for the XL audio stands? What are the dimensions including individual shelf and overall height? What is the weight limit? Can it be mixed and matched with the standard version? TY.
A shopper
on Oct 3, 2019
BEST ANSWER: We are in the process of adding our description and specs and should be available really soon!
- Reply
- Inaccurate
- New User U Staff on Oct 3, 2019
BEST ANSWER: We are in the process of adding our description and specs and should be available really soon!
- Reply
- Inaccurate
- New User U Staff on Oct 3, 2019
Vote for the best answer above!
Description says shelves are an "MDF and composite" wood. Can anyone tell me exactly what type of wood and other "composite" materials are used?
Richard B
on Oct 27, 2019
BEST ANSWER: It's MDF covered in a hard plastic. It's no joke.
- Reply
- Inaccurate
- Scott W on Oct 10, 2021
- Purchased on May 13, 2021
BEST ANSWER: It's MDF covered in a hard plastic. It's no joke.
- Reply
- Inaccurate
- Scott W on Oct 10, 2021
- Purchased on May 13, 2021
Vote for the best answer above!
Vote for the best answer above!
Can I buy just a single tall shelf as an add-on? I need 5 shelves including two of the taller ones.
A shopper
on Dec 8, 2019
BEST ANSWER: You could purchase an XL component stand and add it to this.
- Reply
- Inaccurate
- New User U Staff on Dec 9, 2019
BEST ANSWER: You could purchase an XL component stand and add it to this.
- Reply
- Inaccurate
- New User U Staff on Dec 9, 2019
Vote for the best answer above!
Will you be offering optional 8.9" pillars to make the smaller top shelves larger? Thanks
Daniel L
on Dec 15, 2019
BEST ANSWER: Thank you for your question.
Currently there would not be any pillars of that length planned.
Sorry about any inconvenience this may have caused.
Currently there would not be any pillars of that length planned.
Sorry about any inconvenience this may have caused.
- Reply
- Inaccurate
- Tyler C Staff on Dec 16, 2019
BEST ANSWER: Thank you for your question.
Currently there would not be any pillars of that length planned.
Sorry about any inconvenience this may have caused.
Currently there would not be any pillars of that length planned.
Sorry about any inconvenience this may have caused.
- Reply
- Inaccurate
- Tyler C Staff on Dec 16, 2019
Vote for the best answer above!
Will any shelf support the 100 pound Monolith 11 amp?
A shopper
on Jan 4, 2020
Vote for the best answer above!
Questions For Similar Products
Reviews
4.9 / 5.0
239 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
208
27
3
1
0
Rated 5 out of 5
No surprise
Exactly as described. Will serve the purpose it was purchased for.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Excellent value
Solid stand. Very good quality for the money.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Overall Very Happy with Them.
I bought two of these since they?re higher up and I?m having trouble bending over and my system is complicated so they?ve enabled me to split it up so I don?t have to bend down nearly as far. They were also inexpensive and very rigid and well-made and I might get a third one if my system grows. The multiple racks leaves me flexible which I also like but the could look sharper although they aren?t ugly, just neutral which is fine by me.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
COMPONENT STAND
Perfect. Very sturdy.
(Would like to see them make one with sturdy WHEELS as well.)
(Would like to see them make one with sturdy WHEELS as well.)
Added Aug 9, 2022
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Just what I needed for my audiophile, surround sound components...
Thanks!
Thanks!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Quite solid. Quick assembly. Excellent value...
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Holds everything well and assembled easy
Finally put a TV on a wall so needed a good cabinet. Nice and solid and holds everything well, assembling easy. Could perhaps use some cable management for a premium.
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Rated 5 out of 5
Great stand and any price
This rack is easy to assemble, sturdy and looks even better in real life than it does on the website. The shelves are also configurable so you can place the "heavy duty" shelf on top as opposed to it just being on the bottom. Great rack at any price.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products