Workstream by Monoprice Adjustable Gas Spring Desk Mount for 15~34in Monitors, Silver
Product # 33535
$59.99
Qty: 1
$59.99
Qty: 2-9
$59.59
Qty: 10-19
$58.99
Qty: 20-49
$58.59
Qty: 50+
$57.99
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 56 questions
Browse 56 questions
and 101 answers
The tech specs say that this arm will hold 19.8 lbs., my monitor weighs 16.9 lbs. The middle arm will not hold it up though. Any way to tighten the spring arm?
Noah K
on Apr 24, 2019
BEST ANSWER: Hi, the product ships with minimal tension in the gas spring arm to make assembly safer. Once setup, there is an adjustment screw at the base of the gas spring arm that you will need to adjust. You will need to use the supplied hex wrench and turn the adjustment screw counterclockwise towards the "+" sign until there is enough tension to support the monitor. You can check out the #4 drawing in the manual for reference. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Apr 24, 2019
BEST ANSWER: Hi, the product ships with minimal tension in the gas spring arm to make assembly safer. Once setup, there is an adjustment screw at the base of the gas spring arm that you will need to adjust. You will need to use the supplied hex wrench and turn the adjustment screw counterclockwise towards the "+" sign until there is enough tension to support the monitor. You can check out the #4 drawing in the manual for reference. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Apr 24, 2019
Use the enclosed Allen wrench to tighten the screw at the hinges. They are hard to turn. Put some muscle into it. They hold our heavy 32” monitors without any problems. I raise and lower frequently to alternate sitting and standing (with an auxiliary stand for a keyboard and mouse). Despite raising and lowering twice a day, it works great! You just have to balance the tightness of the hinges with the weight and desired ease of motion. Hope this helps. E
- Reply
- Inaccurate
- Eric Simball S on Apr 24, 2019
- Purchased on Nov 25, 2018
On the elbow is a screw that will increase the tension on the spring. Should be a hex key included with it that fits it. There is a plus and minus embossed next to it showing you which way to turn the screw to increase or decrease the tension.
- Reply
- Inaccurate
- Adam V on Apr 24, 2019
- Purchased on Feb 4, 2019
I have a Dell 32" monitor that weighs 16.5 lbs. Make sure that you tighten the adjusting hex nut counter-clockwise to tighten the arm. Normally, a nut tightens clockwise, which is what I did at first.
- Reply
- Inaccurate
- Victor on Apr 25, 2019
- Purchased on Feb 1, 2019
Yes, a hex key should have came in the kit. I used the hex key to adjust mine to hold the monitor in place. Works great.
- Reply
- Inaccurate
- Eric J on Apr 24, 2019
- Purchased on Jan 12, 2019
Yes, tighten using the allen-head bolt facing up at the pivot between the two arms.
- Reply
- Inaccurate
- Pui H on Apr 25, 2019
- Purchased on Nov 25, 2018
Vote for the best answer above!
Could I use this to mount a TV to a desk? Will the mount lineup with the TV holes?
Ezra H
on Jun 5, 2019
BEST ANSWER: Hi, as others have mentioned, VESA mounting standards between TVs, Monitors, and Mounts are consistent so as long as you have the correct size and pattern it would work. This mount has the 75 x75 and the 100 x 100 mounting points and would work with VESA compliant TVs that use those sizes. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Jun 5, 2019
BEST ANSWER: Hi, as others have mentioned, VESA mounting standards between TVs, Monitors, and Mounts are consistent so as long as you have the correct size and pattern it would work. This mount has the 75 x75 and the 100 x 100 mounting points and would work with VESA compliant TVs that use those sizes. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Jun 5, 2019
The TV likely has VESA standardized mounting holes, and the specs for them will be listed in the manual, or you can measure the holes in millimeters to find out what size it requires. The mount accepts 75x75 or 100x100 ( 75mm or 100mm, just under 3 inches for the smaller, 4 inches for the larger )
- Reply
- Inaccurate
- Adam V on Jun 5, 2019
- Purchased on Feb 4, 2019
the mounting holes are VESA compliant, standard spacing. Generally speaking, if you have a space on the back for this kind of mounting, it will be the correct size.
- Reply
- Inaccurate
- Bob K on Jun 5, 2019
- Purchased on Oct 19, 2018
I have a 24 in TV hooked to this,, depends on bolt pattern
- Reply
- Inaccurate
- James H on Jun 5, 2019
- Purchased on Sep 3, 2018
Vote for the best answer above!
How thick of a desk top will this mount to?
WILLIAM L
on Sep 25, 2019
BEST ANSWER: According to the diagram, which is prominently displayed on the item's web page, the maximum desktop thickness it will accommodate is 3.3 inches. Here is a direct link to Monoprice's diagram, in case you are having trouble locating it on the item's web page: https://downloads.monoprice.com/files/images/15526_18.png
- Reply
- Inaccurate
- J SCOTT M on Sep 25, 2019
- Purchased on Nov 13, 2018
BEST ANSWER: According to the diagram, which is prominently displayed on the item's web page, the maximum desktop thickness it will accommodate is 3.3 inches. Here is a direct link to Monoprice's diagram, in case you are having trouble locating it on the item's web page: https://downloads.monoprice.com/files/images/15526_18.png
- Reply
- Inaccurate
- J SCOTT M on Sep 25, 2019
- Purchased on Nov 13, 2018
Mine is about 2-1/2" thick and it looks like the clamp can take about another inch.
- Reply
- Inaccurate
- Pui H on Sep 26, 2019
- Purchased on Nov 25, 2018
It's shown in the product description, 0.4"-3.3", approx 10-84mm
- Reply
- Inaccurate
- Paul E on Sep 25, 2019
- Purchased on Feb 27, 2019
Vote for the best answer above!
Can this be mounted upside down and if so will it hang fully extended the whole time or can it stow in the upward position?
A shopper
on Nov 25, 2020
BEST ANSWER: Nope, it will hang fully extended. This thing articulates using a spring that you can adjust for different monitor weights. But it's only meant to lift the monitor in an upright position. Upside down, the spring won't be opposing the weight, it will be adding to it--and that's not very helpful.
- Reply
- Inaccurate
- Noah H on Nov 25, 2020
- Purchased on Apr 9, 2020
BEST ANSWER: Nope, it will hang fully extended. This thing articulates using a spring that you can adjust for different monitor weights. But it's only meant to lift the monitor in an upright position. Upside down, the spring won't be opposing the weight, it will be adding to it--and that's not very helpful.
- Reply
- Inaccurate
- Noah H on Nov 25, 2020
- Purchased on Apr 9, 2020
I can't be 100% certain... but I see no reason that it can't be mounted upside down. The gas spring is adjustable so you can tighten or loosen it to balance the monitor this way.
You might want to wait for someone else to respond but this is my opinion.
You might want to wait for someone else to respond but this is my opinion.
- Reply
- Inaccurate
- David S on Nov 25, 2020
- Purchased on Mar 21, 2020
Vote for the best answer above!
H- Can anyone tell me what is the length this arm can extend from clamp to user?
A shopper
on Jul 30, 2018
BEST ANSWER: Hi, clamped to the edge of a desk, this mount can extend around 24" from the desk edge straight towards the user. The base of the clamp that sits on top of the desk is around 3" wide, so this mount can extend 21" from the tip of the clamp base. Hope this helps.
- Reply(1)
- Inaccurate
- Irv S Staff on Aug 1, 2018
Is this for the Large or Small mount? Can you provide details for both mounts so I can purchase the correct size? Thank you!
BEST ANSWER: Hi, clamped to the edge of a desk, this mount can extend around 24" from the desk edge straight towards the user. The base of the clamp that sits on top of the desk is around 3" wide, so this mount can extend 21" from the tip of the clamp base. Hope this helps.
- Reply(1)
- Inaccurate
- Irv S Staff on Aug 1, 2018
Is this for the Large or Small mount? Can you provide details for both mounts so I can purchase the correct size? Thank you!
Vote for the best answer above!
What size grommets does this mount support?
New User U
on Oct 8, 2018
BEST ANSWER: Hi, the mount can work with grommet/through holes from 8mm - 60mm in diamater (up to 2.3 inch diameter). Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Oct 9, 2018
BEST ANSWER: Hi, the mount can work with grommet/through holes from 8mm - 60mm in diamater (up to 2.3 inch diameter). Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Oct 9, 2018
Vote for the best answer above!
If grommet mount is used, does the base cover the entire grommet hole or is there space to still run the wires through the grommet hole? Thanks!
George F
on Jan 22, 2019
BEST ANSWER: Hi, the base is bigger than the typical grommet hole at around 4" x 3.5" so it would cover it if you center the mount over the hole to distribute the weight evenly, which is the typical way to setup this product. But if your desk is made of durable material and the grommet hole is at least 2" diameter, you should be able to offset the base towards the front to leave some space for cables in the back, you probably have to run the cables through before securing the mount since the opening might not be big enough for the plugs or connectors. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Jan 23, 2019
BEST ANSWER: Hi, the base is bigger than the typical grommet hole at around 4" x 3.5" so it would cover it if you center the mount over the hole to distribute the weight evenly, which is the typical way to setup this product. But if your desk is made of durable material and the grommet hole is at least 2" diameter, you should be able to offset the base towards the front to leave some space for cables in the back, you probably have to run the cables through before securing the mount since the opening might not be big enough for the plugs or connectors. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Jan 23, 2019
Vote for the best answer above!
Has this item been discontinued? It's no longer presented in the complete list of monitor mounts.
A shopper
on Jun 28, 2019
BEST ANSWER: Hi, this item is still available and in stock. We have no plans to discontinue this item since it is a good product and selling quite well. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Jun 28, 2019
BEST ANSWER: Hi, this item is still available and in stock. We have no plans to discontinue this item since it is a good product and selling quite well. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Jun 28, 2019
Vote for the best answer above!
My desk is not just a tabletop with legs. It has drawers and a backplate so the space underneath the back edge of the desk is limited. How much space is needed to fit the clamp under the edge on the back of the desk?
A shopper
on Jul 30, 2019
BEST ANSWER: Hi, you would need approximately 3.5 inches from the back of the desk and 4 inches wide. If space on the edges are limited, this product comes with through-hole mounting hardware if you desk has a grommet hole or if you could drill a 1/4" hole through the desktop. Hope this helps, thanks.
- Reply
- Inaccurate
- Irv S Staff on Jul 30, 2019
BEST ANSWER: Hi, you would need approximately 3.5 inches from the back of the desk and 4 inches wide. If space on the edges are limited, this product comes with through-hole mounting hardware if you desk has a grommet hole or if you could drill a 1/4" hole through the desktop. Hope this helps, thanks.
- Reply
- Inaccurate
- Irv S Staff on Jul 30, 2019
Vote for the best answer above!
I want to use this on a Sales Counter that is made of laminate. Is there any type of Stencil or diagram with the product that shows you what size hole should be cut into the laminate counter to fit both the stand and the wires for the monitor?
A shopper
on Jan 11, 2020
BEST ANSWER: Thank you for your question.
Unfortunately we would not offer a stencil or diagram for a hole you could install this mount onto.
Sorry about any inconvenience this may have caused.
Unfortunately we would not offer a stencil or diagram for a hole you could install this mount onto.
Sorry about any inconvenience this may have caused.
- Reply
- Inaccurate
- Tyler C Staff on Jan 13, 2020
BEST ANSWER: Thank you for your question.
Unfortunately we would not offer a stencil or diagram for a hole you could install this mount onto.
Sorry about any inconvenience this may have caused.
Unfortunately we would not offer a stencil or diagram for a hole you could install this mount onto.
Sorry about any inconvenience this may have caused.
- Reply
- Inaccurate
- Tyler C Staff on Jan 13, 2020
Vote for the best answer above!
What is the weight of the monitor without the stand? Wanting to know if the Workstream gas spring monitor arm will accommodate it (19.8 lbs max).
Gregory P
on Jun 17, 2020
Workstream by Monoprice Adjustable Gas Spring Desk Mount for 15~34in Monitors, Silver
Monoprice 43in CrystalPro Curved Ultra-Wide Monitor - 1800R, 32:10, 3840x1200p, DFHD, 120Hz, DisplayHDR 400, AMD FreeSync, Quantum Dot, VA
BEST ANSWER: It is 22lbs with the included stand. I can weight that later when I get it mounted on an arm myself. Given how wide it is I am going to go with something that can do 25-30 lbs on the mount.
- Reply
- Inaccurate
- Scott W on Jun 26, 2020
- Purchased on Jun 20, 2020
BEST ANSWER: It is 22lbs with the included stand. I can weight that later when I get it mounted on an arm myself. Given how wide it is I am going to go with something that can do 25-30 lbs on the mount.
- Reply
- Inaccurate
- Scott W on Jun 26, 2020
- Purchased on Jun 20, 2020
Vote for the best answer above!
How much space do you need on the under side?
A shopper
on Aug 13, 2020
BEST ANSWER: Hi, you will need approximately 3" from the edge.
- Reply
- Inaccurate
- Irv S Staff on Aug 14, 2020
BEST ANSWER: Hi, you will need approximately 3" from the edge.
- Reply
- Inaccurate
- Irv S Staff on Aug 14, 2020
Vote for the best answer above!
Can this be hung upside down and if so, will it hang fully extended the whole time or can it retract and stow up high?
New User U
on Nov 25, 2020
BEST ANSWER: I haven't tried it but I don't see why not. If you tighten the joints enough, you will be able to still move it. But it feels like using it upside down puts more strains on the mount. Try it at your own risk then!
- Reply
- Inaccurate
- Merlion108966341 Z on Nov 25, 2020
- Purchased on Jul 22, 2020
BEST ANSWER: I haven't tried it but I don't see why not. If you tighten the joints enough, you will be able to still move it. But it feels like using it upside down puts more strains on the mount. Try it at your own risk then!
- Reply
- Inaccurate
- Merlion108966341 Z on Nov 25, 2020
- Purchased on Jul 22, 2020
Vote for the best answer above!
Questions For Similar Products
Reviews
4.6 / 5.0
132 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
101
20
7
0
4
Rated 5 out of 5
Robust & Stable Mount, Perfect for Open Office Space
It took me a while to get this set up because I had a hard time tracking down the right adapter for my Samsung monitor - an issue with Samsung, not Monoprice.
Once I got the heavy 27" monitor set up, I spent a long time adjusting the tension screw to keep it from dropping down to the lowest point. However, once I got the tension dialed in, the monitor is 100% secure and stable, even when moving the sit/stand convertible desk that it is mounted to up and down.
I'm very impressed with the build quality of this mount and would recommend it. The only caveat is the arm needs some room to articulate fully, so it will likely bump into the wall if installed in a corner. Perfect for more open spaces, but may not work as intended if too close to a wall or especially a corner.
Once I got the heavy 27" monitor set up, I spent a long time adjusting the tension screw to keep it from dropping down to the lowest point. However, once I got the tension dialed in, the monitor is 100% secure and stable, even when moving the sit/stand convertible desk that it is mounted to up and down.
I'm very impressed with the build quality of this mount and would recommend it. The only caveat is the arm needs some room to articulate fully, so it will likely bump into the wall if installed in a corner. Perfect for more open spaces, but may not work as intended if too close to a wall or especially a corner.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Great product, simple install
Great product! Very satisfied with the product. Install was pretty easy. I ended up drilling a hole through my desk and mounting it that way. It is slightly sturdier than just clamping it.
My only complaint is that my monitor moves slightly when I type. I've gotten used to it, and the movement is only slight. But something to be aware of.
My only complaint is that my monitor moves slightly when I type. I've gotten used to it, and the movement is only slight. But something to be aware of.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Great mount
This mount is the best I've ever had. The hole mount system is perfect for my custom made desk in my home office. I had an existing cable hole in the desktop and the hole mount fit inside it next to the cables from below perfectly. I hade an edge mount device before, but this device lets me have much greater flexibility as to where I position the monitor. In relation to height, angle, proximity to the user, etc., I can readjust it with a simple movement in seconds. I originally purchased the mount so I could hole mount it and I am so glad I did. The option to hole mount or edge mount is a wonderful and versatile feature. This is the best monitor mount I've ever had, and the quality of this mount is a bargain for the price.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Workstream Monitor Mount is a Must
Last year I purchased a Zero-G 35" wide screen monitor. I was quite happy but lost most of my desk space. I quickly got the Workstream Adjustable Gas Spring Desk Mount and after some finagling to get it installed properly, it it was amazing. I got back a lot of desk space plus my monitor now was floating in front of me at eye level, steady and strong. If you have a 27+ monitor at home, you really need a support mount like this. It's awesome
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Functional as expected
Overall, great. however, the base shifts a bit even after tightening it. Some ad hoc solutions must be used to keep it in place.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Gets the job done, fraction of the cost of alternatives.
Works exactly as described.
Install was quick and easy. Build quality is about as good as possible. I'm not too concerned with aesthetics.
I haven't removed it to see if the desktop was scuffed under the clamp. I probably won't, not terribly concerned about that.
Install was quick and easy. Build quality is about as good as possible. I'm not too concerned with aesthetics.
I haven't removed it to see if the desktop was scuffed under the clamp. I probably won't, not terribly concerned about that.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Good stuff
Very well made, easy to adjust.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
work from home and play
so far purchased 3 of thesse monitor arms, got the one first and loved it so much decided to change the mounts i was using for my gaming setup. Only issue I had was one of the from hinges couldnt tighten as the bolt was too soft so the monitor mount would very easily shake and tilt side to side.
Overall though 10/10 best mount if found for the price
Overall though 10/10 best mount if found for the price
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
These work great, I bought this one and a dual option and am very pleased with them. They are very strong yet easy to move.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
it works well
does what it said it would
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products