Monoprice Low Profile 22 lb. Capacity Speaker Wall Mount Brackets (Pair), Black
Product # 11410
UPC # 757901813832
$17.49
*Affirm is not available for business or international orders
Qty: 1
$17.49
Qty: 2-9
$17.49
Qty: 10-19
$17.49
Qty: 20-49
$17.49
Qty: 50+
$17.49
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 42 questions
Browse 42 questions
and 51 answers
Can this unit be used as a ceiling mount?
A shopper
on Feb 7, 2023
BEST ANSWER: Forgot to mention that these may have limited pivoting if you mount to a ceiling, to where your speaker will be restricted to aiming at a downward angle.. as opposed to the wall mount where you can adjust the speaker direction forward or away from the wall or slightly downward to aim at your head when you are sitting in your couch.
- Reply
- Inaccurate
- Shane F on Feb 7, 2023
- Purchased on Dec 19, 2022
BEST ANSWER: Forgot to mention that these may have limited pivoting if you mount to a ceiling, to where your speaker will be restricted to aiming at a downward angle.. as opposed to the wall mount where you can adjust the speaker direction forward or away from the wall or slightly downward to aim at your head when you are sitting in your couch.
- Reply
- Inaccurate
- Shane F on Feb 7, 2023
- Purchased on Dec 19, 2022
The unit comes with a wall bracket and a speaker mounting bracket. The speaker mounting bracket slides into the wall bracket. The speaker mounting bracket can then be taken out of the wall bracket easily without removing the wall bracket. Both units are secured with a screw at the bottom of the speaker bracket. I don't see any issue with mounting the unit horizontally on the ceiling as long as the wall bracket is properly attached considering the speaker weight and the speaker mounting is secured to the wall bracket with the security screw.
- Reply
- Inaccurate
- Raul R on Feb 13, 2023
- Purchased on Jan 3, 2023
I don't believe they are designed for ceiling mount, but that is not to say it cannot be done. You would likely have to mount screws to a stud or framework and not sheetrock in your ceiling.
- Reply
- Inaccurate
- Shane F on Feb 7, 2023
- Purchased on Dec 19, 2022
They can be used because it gives you the opportunity to aim them .
- Reply
- Inaccurate
- Jaime B on Feb 7, 2023
- Purchased on Dec 14, 2022
Vote for the best answer above!
Do they work with Bose 321 speakers?
A shopper
on Jan 2, 2023
BEST ANSWER: The speaker brackets has a 1/4"x20 threaded screw. A keyhole to 1/4"x20 adapter is included for use with speakers that lack a native 1/4"x20 mounting point. All necessary mounting hardware is included.
- Reply
- Inaccurate
- Josh J on Jan 25, 2023
- Purchased on Dec 4, 2022
BEST ANSWER: The speaker brackets has a 1/4"x20 threaded screw. A keyhole to 1/4"x20 adapter is included for use with speakers that lack a native 1/4"x20 mounting point. All necessary mounting hardware is included.
- Reply
- Inaccurate
- Josh J on Jan 25, 2023
- Purchased on Dec 4, 2022
No. You need Boss 321 wall mounts. Look for them at Amazon or EBay. There are other knockoffs available. Just use Boss 321 wall mounts as your search words.
- Reply
- Inaccurate
- Robert M on Jan 7, 2023
- Purchased on Jan 6, 2022
I don’t know, I am using them Definitive Technology ProCinema 60 satellite speakers with 1/4-20 thread mounting holes.
- Reply
- Inaccurate
- Gary on Jan 25, 2023
- Purchased on Nov 16, 2022
They come with a variety of mounting bolts and mounting styles. I’m pretty sure they would work with your speakers.
- Reply
- Inaccurate
- Dalton K on Jan 25, 2023
- Purchased on Oct 20, 2022
Vote for the best answer above!
This will work with bose speakers ub 20 series?
A shopper
on Jul 31, 2017
BEST ANSWER: I do not own those speakers but from what I see on various sites (including the Crutchfield, tutorial video about this) one must predictably use proprietary, Bose brackets designed specifically for those speakers. The Monoprice brackets work well with any speakers that have a standard, pre-drilled hole in the back -- something the Bose speakers seem to be lacking.
- Reply
- Inaccurate
- David K on Aug 1, 2017
- Purchased on Nov 12, 2016
BEST ANSWER: I do not own those speakers but from what I see on various sites (including the Crutchfield, tutorial video about this) one must predictably use proprietary, Bose brackets designed specifically for those speakers. The Monoprice brackets work well with any speakers that have a standard, pre-drilled hole in the back -- something the Bose speakers seem to be lacking.
- Reply
- Inaccurate
- David K on Aug 1, 2017
- Purchased on Nov 12, 2016
Not familiar with that specific speaker system, but it will work with any speakers using 1/4"-20NC threaded mounts, and will easily hold up to a 20 lb speaker.
- Reply
- Inaccurate
- Tony C on Aug 2, 2017
- Purchased on Aug 29, 2016
this will work with any speaker up to the specified weight requirement. It comes with all the hardware need.
- Reply
- Inaccurate
- Jerry D on Jul 31, 2017
- Purchased on Sep 19, 2016
Vote for the best answer above!
At the maximum tilt angle of 30 degrees, what is the maximum speaker height before hitting the wall?
New User U
on Nov 27, 2017
BEST ANSWER: It will depend on where the mounting nut is on your speakers.
- Reply
- Inaccurate
- Dave L Staff on May 8, 2018
BEST ANSWER: It will depend on where the mounting nut is on your speakers.
- Reply
- Inaccurate
- Dave L Staff on May 8, 2018
My speakers are 22 inches tall with the pivot point mount 1/3 way up. The back face of the speaker is only 3 inches off the wall. So they will tilt forward about 15 degrees. But only back about 5 degrees
- Reply
- Inaccurate
- Victor on May 8, 2018
- Purchased on Oct 8, 2017
It depends on the size of your speaker and where the threaded hole is on that speaker.
- Reply
- Inaccurate
- Bob on May 9, 2018
- Purchased on Jun 15, 2017
Vote for the best answer above!
Does the mount tilt up and down up and pivot right and left?
Michael N
on Jan 15, 2021
BEST ANSWER: It does tilt. The stem is a ball system that can be adjusted before you fasten. It's not a huge radius.
- Reply
- Inaccurate
- Anthony M on Jan 17, 2021
- Purchased on Feb 24, 2020
BEST ANSWER: It does tilt. The stem is a ball system that can be adjusted before you fasten. It's not a huge radius.
- Reply
- Inaccurate
- Anthony M on Jan 17, 2021
- Purchased on Feb 24, 2020
Yes it swivels smoothly, up down left and right.
- Reply
- Inaccurate
- Nicholas W on Jan 15, 2021
- Purchased on May 22, 2020
Vote for the best answer above!
Will these mount up to an electrical box in the wall?
A shopper
on Jun 18, 2017
BEST ANSWER: This wall mount's back plate (the plate that is attached to wall) is smaller than a one-gang electrical box. You'd need to attach this back plate to an electric box cover plate first then secure cover plate to electrical box. Might work if your intended speaker is small and light.
- Reply
- Inaccurate
- Philip O on Jun 19, 2017
- Purchased on Jul 4, 2016
BEST ANSWER: This wall mount's back plate (the plate that is attached to wall) is smaller than a one-gang electrical box. You'd need to attach this back plate to an electric box cover plate first then secure cover plate to electrical box. Might work if your intended speaker is small and light.
- Reply
- Inaccurate
- Philip O on Jun 19, 2017
- Purchased on Jul 4, 2016
Yes, if you use a metal cover over the electrical box and then mount these to the cover.
- Reply
- Inaccurate
- Rigo R on Jun 19, 2017
- Purchased on Jul 22, 2016
Vote for the best answer above!
What is the depth of the mount from the wall to the back of the mounted speaker?What is the depth of the mount from the wall to the back of the mounted speaker?
New User U
on Mar 3, 2018
BEST ANSWER: It will depend on how the speakers are mounted. The bracket includes a variety of mounting options, including keyhole and a threaded connection. Using the keyhole bracket, without modifying the threaded bolt on the mount, I find that my speaker is about 3-3/4" (95 mm) from the wall.
Note that you can cut the bolt to be shorter, but doing so could reduce the range of adjustment of the speaker itself, depending on how wide the speaker is (since a larger speaker will hit the wall before you get to the full deflection available in the ball joint on the mount).
Note that you can cut the bolt to be shorter, but doing so could reduce the range of adjustment of the speaker itself, depending on how wide the speaker is (since a larger speaker will hit the wall before you get to the full deflection available in the ball joint on the mount).
- Reply
- Inaccurate
- Peter D on Jun 23, 2022
- Purchased on May 24, 2022
BEST ANSWER: It will depend on how the speakers are mounted. The bracket includes a variety of mounting options, including keyhole and a threaded connection. Using the keyhole bracket, without modifying the threaded bolt on the mount, I find that my speaker is about 3-3/4" (95 mm) from the wall.
Note that you can cut the bolt to be shorter, but doing so could reduce the range of adjustment of the speaker itself, depending on how wide the speaker is (since a larger speaker will hit the wall before you get to the full deflection available in the ball joint on the mount).
Note that you can cut the bolt to be shorter, but doing so could reduce the range of adjustment of the speaker itself, depending on how wide the speaker is (since a larger speaker will hit the wall before you get to the full deflection available in the ball joint on the mount).
- Reply
- Inaccurate
- Peter D on Jun 23, 2022
- Purchased on May 24, 2022
Mine are 2.75” from Wall to back of speaker (Enclave Audio L/R Front Speakers. I cut the bolt down to get that spacing. There is probably another .25” that you can get the speakers closer to the wall, but may make it hard to adjust. Hope this helps.
- Reply
- Inaccurate
- Michael S on Mar 3, 2018
- Purchased on May 30, 2017
Vote for the best answer above!
How would you attach it to samsung rear speakers swa-8500s/za?” "Would you be able to attach it the samsung rear speakers swa-8500s/za?” "Would this work for the samsung rear speakers swa-8500s/za ” "
New User U
on Mar 17, 2019
BEST ANSWER: The mounts come with several screws and mounting options look like it will work.
- Reply
- Inaccurate
- Dave L Staff on Mar 18, 2019
BEST ANSWER: The mounts come with several screws and mounting options look like it will work.
- Reply
- Inaccurate
- Dave L Staff on Mar 18, 2019
The speakers will need a 1/4" threaded insert(female) for the mounts to work. I found the speakers online and now where did I read that the speakers have the 1/4" threaded insert. If you have the speakers check in the back, if there is a threaded hole try and screw in 1?4" bolt. If the speaker doesn't have the threaded insert than this mount will not work.
- Reply
- Inaccurate
- Lorne P on Mar 17, 2019
- Purchased on Feb 21, 2019
Vote for the best answer above!
Would PID 11410 work as a wall mount for this speaker?
A shopper
on Jul 21, 2019
Monoprice Low Profile 22 lb. Capacity Speaker Wall Mount Brackets (Pair), Black
Monoprice Premium Home Theater Center Channel Speaker, Black
BEST ANSWER: If it has a threaded mount in the back, then absolutely!
- Reply
- Inaccurate
- kevin w on Jul 21, 2019
BEST ANSWER: If it has a threaded mount in the back, then absolutely!
- Reply
- Inaccurate
- kevin w on Jul 21, 2019
only if any existing mounts on the back of the center channel speaker would be compatible with the screw mounts on the pid 11410. intuitively, i think the cntr channel is too big for the mounts. i cant ans because i hvnt seen the back of the cntr channel. i usef my pids for cube speakers
- Reply
- Inaccurate
- Jon F on Jul 21, 2019
Vote for the best answer above!
Will these work with a keyhole on a Polk Audio T15?
A shopper
on Aug 18, 2019
BEST ANSWER: Structurally this mount will be fine. You may need some additional hardware for your specific speakers.
- Reply
- Inaccurate
- Dave L Staff on Aug 22, 2019
BEST ANSWER: Structurally this mount will be fine. You may need some additional hardware for your specific speakers.
- Reply
- Inaccurate
- Dave L Staff on Aug 22, 2019
Should work fine, you may need an extra washer and nut, but my speakers are heavier and they handle them just fine.
- Reply
- Inaccurate
- James B on Aug 18, 2019
- Purchased on Dec 22, 2018
Vote for the best answer above!
Will this work with SVS Prime Satellite?
New User U
on Sep 6, 2019
BEST ANSWER: Thank you for your question.
As long as the speakers have the proper screw size and weigh less than 22lbs.
As long as the speakers have the proper screw size and weigh less than 22lbs.
- Reply
- Inaccurate
- Tyler C Staff on Sep 10, 2019
BEST ANSWER: Thank you for your question.
As long as the speakers have the proper screw size and weigh less than 22lbs.
As long as the speakers have the proper screw size and weigh less than 22lbs.
- Reply
- Inaccurate
- Tyler C Staff on Sep 10, 2019
I have not used my Monoprice Low Profile 22 lb. Capacity Speaker Wall Mount Brackets yet but I did a test on a 15 lb.speaker it works fine. Plus it has a good sort of hardware for different configurations. And for the price great.
- Reply
- Inaccurate
- EDUARDO C on Sep 6, 2019
- Purchased on Jul 1, 2019
Vote for the best answer above!
Will this work with Polk Audio S10 Speakers ? they have a extended bass Port on back ?
STUART T
on Jul 2, 2020
BEST ANSWER: Could be work for you but you have to by a washer and a nut to holds from the inside of the extended bass port and then grabbed with the parts the fixture provides. That’s the best way you can used this great wall mount brackets
- Reply
- Inaccurate
- Fernando A on Jul 2, 2020
- Purchased on Jul 14, 2019
BEST ANSWER: Could be work for you but you have to by a washer and a nut to holds from the inside of the extended bass port and then grabbed with the parts the fixture provides. That’s the best way you can used this great wall mount brackets
- Reply
- Inaccurate
- Fernando A on Jul 2, 2020
- Purchased on Jul 14, 2019
I use these with my Polk Audio S10 speakers.
- Reply
- Inaccurate
- Alfred S on Jul 2, 2020
- Purchased on Nov 11, 2019
Vote for the best answer above!
Would this work on ceiling for radius 45?
A shopper
on Jul 22, 2020
BEST ANSWER: I just looked up the speakers and think it will since they are so small. I have Roku speakers on mine and I don't see that working on the ceiling unless they pointed straight down. Hope this helps.
- Reply
- Inaccurate
- James K on Jul 22, 2020
- Purchased on May 1, 2020
BEST ANSWER: I just looked up the speakers and think it will since they are so small. I have Roku speakers on mine and I don't see that working on the ceiling unless they pointed straight down. Hope this helps.
- Reply
- Inaccurate
- James K on Jul 22, 2020
- Purchased on May 1, 2020
I have them mounted on my ceiling for my middle atmos speakers. I used the included screws and drywall anchors and they've held up great for almost 2 months now.
- Reply
- Inaccurate
- brandon a on Jul 23, 2020
- Purchased on May 3, 2020
Vote for the best answer above!
Will these work with Harmon Kardon HKTS-16 satellite speakers?
A shopper
on Dec 4, 2021
BEST ANSWER: No not without adapting the wall mount for a #8 screw stud. These mounts are 1/4"-20 studs much bigger than a size 8-32 screw mount.
- Reply
- Inaccurate
- Steve M on Dec 15, 2021
- Purchased on Jul 6, 2020
BEST ANSWER: No not without adapting the wall mount for a #8 screw stud. These mounts are 1/4"-20 studs much bigger than a size 8-32 screw mount.
- Reply
- Inaccurate
- Steve M on Dec 15, 2021
- Purchased on Jul 6, 2020
The Harmon must have a female thread. It will also need to be the same thread size.
- Reply
- Inaccurate
- Steven M on Dec 5, 2021
- Purchased on Mar 26, 2021
Vote for the best answer above!
will these work with Bose cube speakers?
john l
on Jan 3, 2017
BEST ANSWER: I think so. Very universal.
- Reply
- Inaccurate
- Victor on Oct 23, 2017
- Purchased on Oct 8, 2017
BEST ANSWER: I think so. Very universal.
- Reply
- Inaccurate
- Victor on Oct 23, 2017
- Purchased on Oct 8, 2017
Vote for the best answer above!
Will these mounts work for the rear speakers from a Samsung sound bar system?
A shopper
on Jan 30, 2017
BEST ANSWER: Thank you for your question. If your Samsung Sound Bar System has 1/4"x20 mounting threads and it does not exceed the weight limit then these should work just fine.
- Reply
- Inaccurate
- Mark P Staff on Jun 14, 2017
BEST ANSWER: Thank you for your question. If your Samsung Sound Bar System has 1/4"x20 mounting threads and it does not exceed the weight limit then these should work just fine.
- Reply
- Inaccurate
- Mark P Staff on Jun 14, 2017
Vote for the best answer above!
Will these mounts work for the rear speakers in a Samsung sound bar system?
A shopper
on Jan 30, 2017
Vote for the best answer above!
Would you use these to mount 13 lb bookshelf speakers into studs? Has anyone used these for that weight?
A shopper
on Mar 11, 2017
BEST ANSWER: Thank you for your question. If your bookshelf speakers are equipped with pre-threaded 1/4"x20 mounting points or a keyhole mounting points, it would be able to hold no problem.
- Reply(1)
- Inaccurate
- Mark P Staff on Apr 19, 2017
Hi...I just received these and have a similar question. The instructions appear to show installation in a stud, yet there are anchors provided. The anchor isn't supposed to go into the stud, is it? And if not, would these still hold 13 lb bookshelf speakers in just drywall and an anchor? Thanks.
BEST ANSWER: Thank you for your question. If your bookshelf speakers are equipped with pre-threaded 1/4"x20 mounting points or a keyhole mounting points, it would be able to hold no problem.
- Reply(1)
- Inaccurate
- Mark P Staff on Apr 19, 2017
Hi...I just received these and have a similar question. The instructions appear to show installation in a stud, yet there are anchors provided. The anchor isn't supposed to go into the stud, is it? And if not, would these still hold 13 lb bookshelf speakers in just drywall and an anchor? Thanks.
Vote for the best answer above!
can they be used to mount definitive pro cinema speakers?
New User U
on May 18, 2017
BEST ANSWER: I myself used this Item to secure pro cinema speakers and it worked perfectly. Great buy
- Reply
- Inaccurate
- KIMBERLY R on May 18, 2017
- Purchased on Jun 19, 2016
BEST ANSWER: I myself used this Item to secure pro cinema speakers and it worked perfectly. Great buy
- Reply
- Inaccurate
- KIMBERLY R on May 18, 2017
- Purchased on Jun 19, 2016
Vote for the best answer above!
Will these connect to a 4 lb Sony single screw speaker connection?
Larry K
on Nov 13, 2017
BEST ANSWER: Yes it should
- Reply(1)
- Inaccurate
- Anastasios C on Nov 14, 2017
- Purchased on Dec 6, 2016
BEST ANSWER: Yes it should
- Reply(1)
- Inaccurate
- Anastasios C on Nov 14, 2017
- Purchased on Dec 6, 2016
Vote for the best answer above!
How do you use this mount with Fluance AVBP2 speakers? the speakers each have 2 keyholes. Can't figure out how to mount using this mount.
New User U
on Dec 10, 2017
BEST ANSWER: Thank you for your question.
Unfortunately we would not have information on how to mount those specific speakers to this bracket.
You would want to reach out to Fluance for information concerning that.
Unfortunately we would not have information on how to mount those specific speakers to this bracket.
You would want to reach out to Fluance for information concerning that.
- Reply
- Inaccurate
- Tyler C Staff on Jun 25, 2019
BEST ANSWER: Thank you for your question.
Unfortunately we would not have information on how to mount those specific speakers to this bracket.
You would want to reach out to Fluance for information concerning that.
Unfortunately we would not have information on how to mount those specific speakers to this bracket.
You would want to reach out to Fluance for information concerning that.
- Reply
- Inaccurate
- Tyler C Staff on Jun 25, 2019
Vote for the best answer above!
I have Definitive Technology PM1000's and PM 800s I need to mount. Anyone use these mounts with either of these speakers?
Dennis E
on Aug 17, 2018
BEST ANSWER: I use it with both of those. I'd say it sort of works, but not very well. The problem is that the screw mount on those speakers is fairly low, making them top heavy. So the speakers would tend to rotate upside down with the slightest nudge. After playing with it for a while, I did manage to get it to be reasonably secure. I tightened it as hard as I possibly could and then some. I think I also put in an additional spacer to make it work better, but I forgot now and am out travelling. Anyway, they haven't toppled in 8+ months though I didn't bump into them yet. Also, I think the screw is a little long, so the speakers stick out a little more than I'd like. FYI, I did not try the keyhole mount.
- Reply
- Inaccurate
- Christian H on Aug 17, 2018
- Purchased on Nov 24, 2017
BEST ANSWER: I use it with both of those. I'd say it sort of works, but not very well. The problem is that the screw mount on those speakers is fairly low, making them top heavy. So the speakers would tend to rotate upside down with the slightest nudge. After playing with it for a while, I did manage to get it to be reasonably secure. I tightened it as hard as I possibly could and then some. I think I also put in an additional spacer to make it work better, but I forgot now and am out travelling. Anyway, they haven't toppled in 8+ months though I didn't bump into them yet. Also, I think the screw is a little long, so the speakers stick out a little more than I'd like. FYI, I did not try the keyhole mount.
- Reply
- Inaccurate
- Christian H on Aug 17, 2018
- Purchased on Nov 24, 2017
Vote for the best answer above!
Can the base be mounted with toggle bolts?
David A
on Jul 31, 2020
BEST ANSWER: Yes it can, in fact that will give you a stronger mount. It comes with the cheepy plastic ribbed anchors. I used toggle bolts too without issue they work super much better than the anchor sent.
- Reply
- Inaccurate
- Steve M on Aug 1, 2020
- Purchased on Jul 6, 2020
BEST ANSWER: Yes it can, in fact that will give you a stronger mount. It comes with the cheepy plastic ribbed anchors. I used toggle bolts too without issue they work super much better than the anchor sent.
- Reply
- Inaccurate
- Steve M on Aug 1, 2020
- Purchased on Jul 6, 2020
Vote for the best answer above!
Will this work with Definitive Technology SR9040 or SR9080's? Both have Keyhole hanger mount weighting around 10 lbs.
Snehal B
on Dec 2, 2020
BEST ANSWER: These include a bracket for keyhole mounting, and the 10 lb weight of those speakers is well under the 22 lb rating for these mounts. Should work fine.
- Reply
- Inaccurate
- Peter D on Jun 23, 2022
- Purchased on May 24, 2022
BEST ANSWER: These include a bracket for keyhole mounting, and the 10 lb weight of those speakers is well under the 22 lb rating for these mounts. Should work fine.
- Reply
- Inaccurate
- Peter D on Jun 23, 2022
- Purchased on May 24, 2022
Vote for the best answer above!
Will it work on D7 (definitive technology speakers)?
A shopper
on Feb 8, 2022
BEST ANSWER: The D7 isn't designed to be mounted on a wall. That said, they are only 12 pounds and the bracket can handle the weight of the D7.
- Reply
- Inaccurate
- Marcus W on Feb 8, 2022
- Purchased on Jun 25, 2021
BEST ANSWER: The D7 isn't designed to be mounted on a wall. That said, they are only 12 pounds and the bracket can handle the weight of the D7.
- Reply
- Inaccurate
- Marcus W on Feb 8, 2022
- Purchased on Jun 25, 2021
Vote for the best answer above!
In the back of a definitive technology D7 speaker thread depth is 3/8 Will it Screw into that?
A shopper
on Feb 8, 2022
BEST ANSWER: I have Def Tec XTR-40's and I was able to screw directly into the provided threads on the back of the speaker. I'm sure they use the same size thread pattern on all of their speakers.
- Reply
- Inaccurate
- Marcus W on Mar 29, 2022
- Purchased on Jun 25, 2021
BEST ANSWER: I have Def Tec XTR-40's and I was able to screw directly into the provided threads on the back of the speaker. I'm sure they use the same size thread pattern on all of their speakers.
- Reply
- Inaccurate
- Marcus W on Mar 29, 2022
- Purchased on Jun 25, 2021
Vote for the best answer above!
My speakers have a 3/8" 16 mounting hole. Can I swap out the 1/4" bolt these come with for a 3/8" one?
Nathan W
on May 18, 2022
BEST ANSWER: There is an adapter plate included with a 1/4-20 threaded post. The wall mount screws into the threaded post and the adapter plate is screwed into the speaker. It comes with M5 and M6 bolts for the plate to match speakers with those threads. You'd probably have to drill out the plate a bit to get a 3/8 bolt through it into the speaker.
- Reply
- Inaccurate
- Brian G on May 26, 2022
- Purchased on Dec 6, 2021
BEST ANSWER: There is an adapter plate included with a 1/4-20 threaded post. The wall mount screws into the threaded post and the adapter plate is screwed into the speaker. It comes with M5 and M6 bolts for the plate to match speakers with those threads. You'd probably have to drill out the plate a bit to get a 3/8 bolt through it into the speaker.
- Reply
- Inaccurate
- Brian G on May 26, 2022
- Purchased on Dec 6, 2021
Vote for the best answer above!
Is this the right mount for the M-OW1?
A shopper
on Jun 28, 2022
BEST ANSWER: Yes it will, You can use the metal adapters provided or possibly the 1/4-20 nut and directly mount to the quarter inch ball adapter in the slip mount of the speaker.
- Reply
- Inaccurate
- Steve M on Jul 31, 2022
- Purchased on Sep 3, 2021
BEST ANSWER: Yes it will, You can use the metal adapters provided or possibly the 1/4-20 nut and directly mount to the quarter inch ball adapter in the slip mount of the speaker.
- Reply
- Inaccurate
- Steve M on Jul 31, 2022
- Purchased on Sep 3, 2021
Vote for the best answer above!
Will this work with 3/8"-16 tread ?
A shopper
on Mar 11, 2023
BEST ANSWER: Do not. know.
I used the hardware supplied and used the keyhole on the back of the speakers.
I used the hardware supplied and used the keyhole on the back of the speakers.
- Reply
- Inaccurate
- Tony on Mar 11, 2023
- Purchased on Jul 29, 2022
BEST ANSWER: Do not. know.
I used the hardware supplied and used the keyhole on the back of the speakers.
I used the hardware supplied and used the keyhole on the back of the speakers.
- Reply
- Inaccurate
- Tony on Mar 11, 2023
- Purchased on Jul 29, 2022
Vote for the best answer above!
I am trying to mount 14 pound speakers with these, but I can't seem to screw the ball socket tight enough that it does not droop under the weight. I am considering adding sand or glue to help. Any suggestions? Anyone else experience this?
DAVID B
on Feb 17, 2018
Questions For Similar Products
Reviews
4.3 / 5.0
105 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
61
27
8
6
3
Rated 5 out of 5
Great little mounts.
Great mount! not really pushing the limit on size or weight my speakers are 11.4 x 8.1 x 9.0 inches (HxWxD) and a little under 12lbs. That said these are solid for my speakers mounted in drywall with the included drywall anchors. I should probably mention they look nice too. They were the best looking option I could come up with for my side surrounds.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 3 out of 5
Don't overtighten the screws to the wall!
Once I got them mounted and assembled on the wall, they are just fine. However, after putting the first mounting plate on the wall, I had a tough time getting the front plate (that actually holds the speaker mount) to attach to the mounting plate. I'm assuming that tightening the screws down warped the mounting plate so much that the connecting lugs wouldn't go in. I ended up putting the washers for the screws between the mounting plate and the wall which fixed the problem. The instruction sheet is very vague on that point.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Perfect!
Small footprint, quality build, adjustable in all directions, can be lifted out when necessary, everything included. Great value!
Philips surround speaker
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Works Great and Great Price
These work great and look good too. Very good for the price in my opinion. Nothing has fallen off of the wall or the ceiling on my surround sound setup and it has been several months.
On a side note, while there are several mounting options provided with these, I wish they had key hole mount options as my center channel was just that. All other speakers were mounted using these just fine though with the provided hardware. I do understand that these may not be the most practical way to mount key hole speakers though and therefore understand why.
On a side note, while there are several mounting options provided with these, I wish they had key hole mount options as my center channel was just that. All other speakers were mounted using these just fine though with the provided hardware. I do understand that these may not be the most practical way to mount key hole speakers though and therefore understand why.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Fair value price as functionality is less than description.
My 7.5 lbs. speaker does not stay straight. I had to use monkey ranch to tighten the triangular nut to barely hold the speaker. I wonder what will happen if have 10 or 12 lbs. speaker.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Good enough for me!
Good quality product. I used them to mount the rear speakers that came with the Samsung HW-Q990B soundbar. I knocked one start off for the cheap wall anchors supplied in the kit. They didn't grab the sheetrock very well so I ended up needing to use using my own anchors.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Excellent Mounts
I've had my rear surround speakers from monoprice on the wall using these mounts for many years. They were easy to install and have functioned just fine.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
July 1, 2022
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 3 out of 5
Flexible, but wrong anchors
For some reason, the only wall anchors these come with are really masonry anchors. Given the low weight rating, and the four screws to mount each, they do suffice for their purpose. But for the North American market, it'd really be better if these came with proper drywall anchors, since the vast majority of construction here uses that and not concrete, cinder block, etc. as found in other regions of the world.
The lack of the proper anchors is particularly surprising, given that otherwise this kit comes with a very good variety of attachment options for the speakers themselves. There are something like four or five different types of brackets and connectors, which I would imagine cover pretty much every possible configuration of speaker that has any kind of mounting feature (such as keyhole or threaded receiver).
Unfortunately, in my opinion for something sold in the North American market, failing to provide drywall anchors is inexcusable, and I've reduced the rating accordingly. Users should really go get proper anchors from the hardware store. But the rest of the bracket is nicely designed and has worked great for me.
The lack of the proper anchors is particularly surprising, given that otherwise this kit comes with a very good variety of attachment options for the speakers themselves. There are something like four or five different types of brackets and connectors, which I would imagine cover pretty much every possible configuration of speaker that has any kind of mounting feature (such as keyhole or threaded receiver).
Unfortunately, in my opinion for something sold in the North American market, failing to provide drywall anchors is inexcusable, and I've reduced the rating accordingly. Users should really go get proper anchors from the hardware store. But the rest of the bracket is nicely designed and has worked great for me.
- Was this review helpful? Yes (6) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (6) No (0)
- Flag as Inappropriate
Reviews for Similar Products