Monoprice 3-Way Adjustable Tilting Desk Mount Bracket for 13~30in Monitors up to 33 lbs., Black
Product # 5402
UPC # 844660054023
$29.99
*Affirm is not available for business or international orders
Qty: 1
$29.99
Qty: 2-9
$29.24
Qty: 10-19
$28.79
Qty: 20-49
$28.34
Qty: 50+
$27.29
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 28 questions
Browse 28 questions
and 45 answers
Can the arm swing 360 degrees? My desk is at the foot of my bed and I would like to be able to swing it back and forth to face me in bed for entertainment and then swing back towards my desk chair to do school work. Is it possible with this arm?
A shopper
on Jun 7, 2020
BEST ANSWER: No if you the compression mount, you can get 130-150. if you mount it permanently you could do that if the area is very strong
- Reply
- Inaccurate
- Russell G on Jun 8, 2020
- Purchased on Dec 3, 2019
BEST ANSWER: No if you the compression mount, you can get 130-150. if you mount it permanently you could do that if the area is very strong
- Reply
- Inaccurate
- Russell G on Jun 8, 2020
- Purchased on Dec 3, 2019
Yes it does. You can swing 180 degrees without touching any hardware, 360 by loosening the height adjusting collar.
- Reply
- Inaccurate
- Stuart M on Jun 8, 2020
- Purchased on Feb 7, 2020
Yes it is possible. Though the power cords would get tangled and possibly bind if you do this.
- Reply
- Inaccurate
- Scott P on Jun 7, 2020
- Purchased on Feb 27, 2020
Yes it can. The bottom section is a tube within a tube and can rotate all the way around.
- Reply
- Inaccurate
- E R on Jun 7, 2020
- Purchased on Feb 14, 2020
Yes, it can swing 360 degrees. only problem would be the cords.
- Reply
- Inaccurate
- David Packer P on Jun 7, 2020
- Purchased on Mar 7, 2020
Vote for the best answer above!
Can it be bolted into the desk?
A shopper
on Jun 5, 2020
BEST ANSWER: It cannot be bolted on top of the desk as is, but if a desk is 1 1/2" thick or more, you can disassemble the mounting bracket and use existing 2 or 4 holes (depending of the desk top thickness or presence of the vertical desk side) on the vertical part of the mount and bolt/screw it to the side of your desk. This, of course will limit the position of the fixture to the edge of the desk only.
Or, you can cut off/grind the vertical part of the mount, drill 4 holes on the upper horizontal plate and than bolt/screw it on top of your desk at any place...
Or, you can cut off/grind the vertical part of the mount, drill 4 holes on the upper horizontal plate and than bolt/screw it on top of your desk at any place...
- Reply
- Inaccurate
- Nash D on Jun 5, 2020
- Purchased on Nov 7, 2019
BEST ANSWER: It cannot be bolted on top of the desk as is, but if a desk is 1 1/2" thick or more, you can disassemble the mounting bracket and use existing 2 or 4 holes (depending of the desk top thickness or presence of the vertical desk side) on the vertical part of the mount and bolt/screw it to the side of your desk. This, of course will limit the position of the fixture to the edge of the desk only.
Or, you can cut off/grind the vertical part of the mount, drill 4 holes on the upper horizontal plate and than bolt/screw it on top of your desk at any place...
Or, you can cut off/grind the vertical part of the mount, drill 4 holes on the upper horizontal plate and than bolt/screw it on top of your desk at any place...
- Reply
- Inaccurate
- Nash D on Jun 5, 2020
- Purchased on Nov 7, 2019
Yes, If the desk has at least three inches from the edge and 1 inch thickness, if not you will have to use a small block of wood as a spacer.
- Reply
- Inaccurate
- Ray P on Jun 5, 2020
- Purchased on Sep 9, 2019
It’s designed like a C-clamp so I don’t think it can be bolted “into” a desktop without drilling holes through it.
- Reply
- Inaccurate
- Chris K on Jun 5, 2020
- Purchased on Nov 18, 2019
It actually uses a clamp that attaches to the top and bottom of the desk. Clamp opens up to about 3 inches.
- Reply
- Inaccurate
- Art C on Jun 5, 2020
- Purchased on Nov 29, 2019
Vote for the best answer above!
I have a lip under my desk 1.25" from the edge that the clamp will need to beyond to secure to the desktop. What is the distance from the inside of the mounting bracket to the disk on the screw clamp?
New User U
on Aug 9, 2018
BEST ANSWER: If anyone else has this issue the easiest solution would to just get a small piece of wood or plastic as think as the lip, and just clamp it in place, or you could also just remove 2" of the lip in the spot where you need to install this... Either way send like not much trouble at all...
- Reply
- Inaccurate
- Douglass B M on Feb 23, 2020
BEST ANSWER: If anyone else has this issue the easiest solution would to just get a small piece of wood or plastic as think as the lip, and just clamp it in place, or you could also just remove 2" of the lip in the spot where you need to install this... Either way send like not much trouble at all...
- Reply
- Inaccurate
- Douglass B M on Feb 23, 2020
Excellent question. Inside the bracket to the inside edge of the disc is only 1/2". Obviously in your case that will not clear. The disc itself is almost 1-7/8" in diameter as well.
You essentially need a desk edge that has NO lip - as was the case for me with the desk I put mine on. I have two of them for my two monitors.
You could put the mounting bracket "backwards" and use the holes to screw it in to the desk, rather than being clamped. I did not need to do this, but that obviously would not be as secure, depending on how well the screws bit in to the desk.
These are GREAT mounts, highly adjustable. Maybe a new desk?? :)
You essentially need a desk edge that has NO lip - as was the case for me with the desk I put mine on. I have two of them for my two monitors.
You could put the mounting bracket "backwards" and use the holes to screw it in to the desk, rather than being clamped. I did not need to do this, but that obviously would not be as secure, depending on how well the screws bit in to the desk.
These are GREAT mounts, highly adjustable. Maybe a new desk?? :)
- Reply
- Inaccurate
- Kirk M on Aug 9, 2018
- Purchased on Oct 16, 2017
I'm not certain the exact distance, but this isn't going to extend beyond your lip at 1.25"/32mm. When I've had this issue, I've tended to just keep it on the edge-side of the lip. They usually still hold well, although your lip is closer than any I've dealt with. If there's any way you can remove the lip, or just a section of it, that would fix your problem. Also, you might consider attaching a small wood block (say, a small wall footer piece that's 1" x 1/2" x 3") on each side of the lip with some finishing nails. That would give you a roughly 2.5" x 3" flat space to affix the clamp.
- Reply
- Inaccurate
- Fred M on Aug 9, 2018
- Purchased on Sep 26, 2017
It's approx 1.25" from inside of clamp to screw. There is, however .5" from screw to inside part of bottom of clamp. If 1 1/4 " is all you have you could have a problem getting enough under desk for proper support.
- Reply
- Inaccurate
- DAVID T on Aug 9, 2018
- Purchased on Oct 11, 2017
Vote for the best answer above!
Will this work for a 29" Ultra Wide monitor? (2560x1080)
A shopper
on Oct 17, 2017
BEST ANSWER: It should work if the VESA mount will match your monitor and it's within the weight limit of the mount.
- Reply
- Inaccurate
- Edith B on Oct 17, 2017
- Purchased on Dec 7, 2016
BEST ANSWER: It should work if the VESA mount will match your monitor and it's within the weight limit of the mount.
- Reply
- Inaccurate
- Edith B on Oct 17, 2017
- Purchased on Dec 7, 2016
As long as the table you are clamping it too can handle it, I don't see why not. I have it working on a 24" no problem. This is a sturdy bracket.
- Reply
- Inaccurate
- Jeffrey S on Oct 17, 2017
- Purchased on Dec 5, 2016
Yes. It should. Mine is an 23" LG. It fits up to 30". The mounting bracket is universal. This really helped clear some desk space.
- Reply
- Inaccurate
- Jeffrey W on Oct 18, 2017
- Purchased on Dec 7, 2016
Vote for the best answer above!
Can the arms rotate 360 degrees?
New User U
on Jun 7, 2020
BEST ANSWER: The horizontal extensions are free to rotate around the axis fully and the VESA mount will tilt angle but not pivot (landscape/portrait).
- Reply
- Inaccurate
- Eric F on Aug 10, 2021
- Purchased on Jun 23, 2021
BEST ANSWER: The horizontal extensions are free to rotate around the axis fully and the VESA mount will tilt angle but not pivot (landscape/portrait).
- Reply
- Inaccurate
- Eric F on Aug 10, 2021
- Purchased on Jun 23, 2021
The two arms can swing 360 horizontally around their anchor points. The part holding the monitor can only tilt.
- Reply
- Inaccurate
- James W on Aug 10, 2021
- Purchased on May 4, 2021
Yes vertically it can rotate 360*
- Reply
- Inaccurate
- John K on Aug 10, 2021
- Purchased on May 8, 2021
Vote for the best answer above!
How deep is the "C" clamp? In other words how many inches of overhang is required on the desktop for the clamp?
Paul R
on Dec 1, 2016
BEST ANSWER: The total depth of the C-clamp is 80mm (3.15 inches). For stability's sake, you'll want 3 at least inches of grip, but smaller monitors can get away with a little less without losing the attachment to the desk.
- Reply
- Inaccurate
- Fred M on Mar 22, 2017
BEST ANSWER: The total depth of the C-clamp is 80mm (3.15 inches). For stability's sake, you'll want 3 at least inches of grip, but smaller monitors can get away with a little less without losing the attachment to the desk.
- Reply
- Inaccurate
- Fred M on Mar 22, 2017
Looks like it would be best for a good bite to have 2.5".
- Reply
- Inaccurate
- Stan B on Dec 24, 2016
- Purchased on Dec 7, 2016
Vote for the best answer above!
can i use it for 32/34 monitor? if monitor does not reach 33 lbs
wenjin x
on Nov 24, 2017
BEST ANSWER: Hi, if the monitor weighs less than 33 lbs, you just need to check that the center of the vesa mounting points in your monitor are within the height range of this mount, which is 11 to 17 inches. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Nov 28, 2017
BEST ANSWER: Hi, if the monitor weighs less than 33 lbs, you just need to check that the center of the vesa mounting points in your monitor are within the height range of this mount, which is 11 to 17 inches. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Nov 28, 2017
I''d suggest you choose the model that handles the larger screen.. Keep in mind the VESA mount can be in different locations on different monitors.
- Reply
- Inaccurate
- james h on Feb 10, 2018
- Purchased on Sep 4, 2017
Vote for the best answer above!
Could I use this to mount a monitor in PORTRAIT orientation?
Dillon S
on Dec 31, 2019
BEST ANSWER: You can mount the monitor in either portrait or landscape but you can't swap between them easily. The arm doesn't allow for rotation but you can unscrew it and mount it the other way. If you want rotation you'll need to get a bit more expensive model.
- Reply
- Inaccurate
- David W on Dec 31, 2019
- Purchased on Jan 5, 2019
BEST ANSWER: You can mount the monitor in either portrait or landscape but you can't swap between them easily. The arm doesn't allow for rotation but you can unscrew it and mount it the other way. If you want rotation you'll need to get a bit more expensive model.
- Reply
- Inaccurate
- David W on Dec 31, 2019
- Purchased on Jan 5, 2019
Yes, just turn 90 degrees when mounting the screws in the back.
- Reply
- Inaccurate
- MARVIN B on Jan 2, 2020
- Purchased on Mar 25, 2019
Vote for the best answer above!
Does this arm assy include the screws to mount to the VESA pattern?
Dan P
on Jan 12, 2020
BEST ANSWER: Yes comes with all hardware. Might need to add a small 1" thick block of wood if clamping to something under an 1" thickness like a shelf or drawing table. I used a short piece of 1X2. Very well made sturdy component.
- Reply
- Inaccurate
- Mike G on Jan 12, 2020
- Purchased on May 29, 2019
BEST ANSWER: Yes comes with all hardware. Might need to add a small 1" thick block of wood if clamping to something under an 1" thickness like a shelf or drawing table. I used a short piece of 1X2. Very well made sturdy component.
- Reply
- Inaccurate
- Mike G on Jan 12, 2020
- Purchased on May 29, 2019
Vote for the best answer above!
Is this compatible with Imac 21.5 mid 2014 ?
New User U
on Jun 10, 2020
BEST ANSWER: According to a quick google search it looks like you would need a vesa adapter kit for an Imac. If you don't see 4 holes in a square pattern (vesa mount) on the back of your Imac then you will need an adapter of some sort.
- Reply
- Inaccurate
- Jacob B on Jun 10, 2020
- Purchased on Mar 23, 2020
BEST ANSWER: According to a quick google search it looks like you would need a vesa adapter kit for an Imac. If you don't see 4 holes in a square pattern (vesa mount) on the back of your Imac then you will need an adapter of some sort.
- Reply
- Inaccurate
- Jacob B on Jun 10, 2020
- Purchased on Mar 23, 2020
When I bought this item, it was used to mount my LG monitor by checking what VESA hole pattern to mount the monitor to the stand. Since I do not have Imac 21.5, I cannot answer your question.
- Reply
- Inaccurate
- Nick0776 on Jun 10, 2020
- Purchased on Mar 30, 2020
Vote for the best answer above!
Can it be flush mounted to the desk surface(i.e. Are there screw holes pre-drilled?)
Mike S
on Jun 19, 2017
BEST ANSWER: Thank you for your question. This mount will only clamp to a desk. It would not have any option to drill it into a desk. Product # 7562 will have that option if you would like to take a look at it there is a link below.
- Reply
- Inaccurate
- Mark P Staff on Jun 22, 2017
Monoprice High Quality Adjustable Tilting Desk Mount Bracket for LCD LED (Max 17.5 lbs., 15~22in), Black
BEST ANSWER: Thank you for your question. This mount will only clamp to a desk. It would not have any option to drill it into a desk. Product # 7562 will have that option if you would like to take a look at it there is a link below.
- Reply
- Inaccurate
- Mark P Staff on Jun 22, 2017
Monoprice High Quality Adjustable Tilting Desk Mount Bracket for LCD LED (Max 17.5 lbs., 15~22in), Black
Vote for the best answer above!
Will this support a 32 inch TV? My TV's manual says the weight of the panel is only 11.31 lb, so it's well within the published weight limit, is there a different reason panels of this size are not "supported"?
A shopper
on Sep 25, 2017
BEST ANSWER: Hi, the recommended screen sizes are to ensure problem-free use. Bigger screens could still work but might be too big to allow for adjustments (the mount might end up with limited adjustment range).
Your TV should work if it meets the following: 1) max weight of 33 lbs. 2) Has VESA 50x50, 75x75, or 100x100 mounting pattern. 3) less than 15" from the bottom to the center of the VESA mount screws.
Thanks for checking.
Your TV should work if it meets the following: 1) max weight of 33 lbs. 2) Has VESA 50x50, 75x75, or 100x100 mounting pattern. 3) less than 15" from the bottom to the center of the VESA mount screws.
Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Oct 10, 2017
BEST ANSWER: Hi, the recommended screen sizes are to ensure problem-free use. Bigger screens could still work but might be too big to allow for adjustments (the mount might end up with limited adjustment range).
Your TV should work if it meets the following: 1) max weight of 33 lbs. 2) Has VESA 50x50, 75x75, or 100x100 mounting pattern. 3) less than 15" from the bottom to the center of the VESA mount screws.
Thanks for checking.
Your TV should work if it meets the following: 1) max weight of 33 lbs. 2) Has VESA 50x50, 75x75, or 100x100 mounting pattern. 3) less than 15" from the bottom to the center of the VESA mount screws.
Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Oct 10, 2017
Vote for the best answer above!
The 15" height ... how is the 15" measured? From the top of the desk to ________?
A shopper
on Sep 26, 2017
Monoprice 3-Way Adjustable Tilting Desk Mount Bracket for 13~30in Monitors up to 33 lbs., Black
Monoprice Adjustable Tilting Desk Mount Bracket for 13~30in Monitors up to 33 lbs., Black
Monoprice 2-Way Adjustable Tilting Desk Mount Bracket for 13~30in Monitors, Black
BEST ANSWER: Hi, the 15" is measured from the top of the desk to the center of the VESA mounting plate at full extension. There is a diagram as the last picture for each item that should provide more details if you need to visualize it. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Oct 10, 2017
BEST ANSWER: Hi, the 15" is measured from the top of the desk to the center of the VESA mounting plate at full extension. There is a diagram as the last picture for each item that should provide more details if you need to visualize it. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Oct 10, 2017
Vote for the best answer above!
The dimensions Diagram shows, what appears to be, three screws that attach the pole to the mounting bracket. Is this correct/accurate?
Jennifer S
on Dec 23, 2017
BEST ANSWER: Thank you for your question.
The diagrams would be accurate but the manual would show there are two safety screws that keep the mounting bracket on the arm that attachés to the desk.
The diagrams would be accurate but the manual would show there are two safety screws that keep the mounting bracket on the arm that attachés to the desk.
- Reply
- Inaccurate
- Tyler C Staff on Jun 26, 2019
BEST ANSWER: Thank you for your question.
The diagrams would be accurate but the manual would show there are two safety screws that keep the mounting bracket on the arm that attachés to the desk.
The diagrams would be accurate but the manual would show there are two safety screws that keep the mounting bracket on the arm that attachés to the desk.
- Reply
- Inaccurate
- Tyler C Staff on Jun 26, 2019
Vote for the best answer above!
what size pole is it using?
Barry C
on Jan 1, 2018
BEST ANSWER: the inner pole is 25 mm, just under 1 inch.
- Reply(1)
- Inaccurate
- Dennis K on Sep 4, 2018
- Purchased on Aug 15, 2018
BEST ANSWER: the inner pole is 25 mm, just under 1 inch.
- Reply(1)
- Inaccurate
- Dennis K on Sep 4, 2018
- Purchased on Aug 15, 2018
Vote for the best answer above!
Does it work on curved monitors?
A shopper
on Jul 16, 2018
BEST ANSWER: Yes! Very well actually I have a Samsung 27" monitor on my desk at work with this mount and I love it. Was easy to install and sits at the perfect height.
- Reply
- Inaccurate
- Patrick M on Jul 17, 2018
- Purchased on Aug 28, 2017
BEST ANSWER: Yes! Very well actually I have a Samsung 27" monitor on my desk at work with this mount and I love it. Was easy to install and sits at the perfect height.
- Reply
- Inaccurate
- Patrick M on Jul 17, 2018
- Purchased on Aug 28, 2017
Vote for the best answer above!
Good afternoon, can you confirm the manufacture country for this mount and if it is NAFTA qualified?
RAFAEL B
on Jan 3, 2019
BEST ANSWER: Pretty sure these are made in China. Though I can't find any stamp or sticker indicating that on the product itself. NAFTA should not be applicable if made in China correct?
- Reply
- Inaccurate
- Adam S on Jan 4, 2019
- Purchased on Mar 3, 2018
BEST ANSWER: Pretty sure these are made in China. Though I can't find any stamp or sticker indicating that on the product itself. NAFTA should not be applicable if made in China correct?
- Reply
- Inaccurate
- Adam S on Jan 4, 2019
- Purchased on Mar 3, 2018
Vote for the best answer above!
my LG monitor don't have visa, how can I attache it to any of your desk mount bracket?
A shopper
on Apr 2, 2019
BEST ANSWER: Thank you for your question.
Unless your monitor has a VESA pattern you would not be able to install it on this mount.
Unless your monitor has a VESA pattern you would not be able to install it on this mount.
- Reply
- Inaccurate
- Tyler C Staff on Sep 6, 2019
BEST ANSWER: Thank you for your question.
Unless your monitor has a VESA pattern you would not be able to install it on this mount.
Unless your monitor has a VESA pattern you would not be able to install it on this mount.
- Reply
- Inaccurate
- Tyler C Staff on Sep 6, 2019
Vote for the best answer above!
The diagram shows the height as 435mm which is over 17 inches but the specs talk about “15” inch height. There is even an answer in the Q&A section here that talks about 15 inches to the center of the VESA mount (the current diagram on this page does NOT show such a measurement!). So....what is the true max height? Thanks!
Doug P
on Jul 7, 2019
BEST ANSWER: Hi, 435mm is the measurement to the top of the VESA mount at the highest setting. The 15" is to the center of the VESA mount which is just easier to measure on a monitor. Both measurements are correct, they just measure to a different part of the VESA mount. Hope this helps. Thanks.
- Reply(1)
- Inaccurate
- Irv S Staff on Jul 9, 2019
BEST ANSWER: Hi, 435mm is the measurement to the top of the VESA mount at the highest setting. The 15" is to the center of the VESA mount which is just easier to measure on a monitor. Both measurements are correct, they just measure to a different part of the VESA mount. Hope this helps. Thanks.
- Reply(1)
- Inaccurate
- Irv S Staff on Jul 9, 2019
Vote for the best answer above!
I will need to store this monitor flush against a surface when not in use. The Dimensions diagram does not indicated the distance from the outside of the Mounting Plate to the first pivot knuckle. I only have 4.5" total available space (including the monitor) so this dimension is critical. Can anyone supple that dimension for me?
JD
on Sep 15, 2019
BEST ANSWER: Hi, the minimum protrusion from the back of the desk will be approximately 85mm or 3.4 inches. Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Sep 16, 2019
BEST ANSWER: Hi, the minimum protrusion from the back of the desk will be approximately 85mm or 3.4 inches. Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Sep 16, 2019
Vote for the best answer above!
My TV does not have 50x50, 75x75, or 100x100 VESA mounts. It has 200x200 VESA mounts. Do you have an add-on for this product to adapt it to 200x200 VESA mounts?
New User U
on Nov 11, 2019
BEST ANSWER: Thank you for your question.
Unfortunately we would not have a part that could make your TV's pattern match up with this mount.
Unfortunately we would not have a part that could make your TV's pattern match up with this mount.
- Reply
- Inaccurate
- Tyler C Staff on Dec 4, 2019
BEST ANSWER: Thank you for your question.
Unfortunately we would not have a part that could make your TV's pattern match up with this mount.
Unfortunately we would not have a part that could make your TV's pattern match up with this mount.
- Reply
- Inaccurate
- Tyler C Staff on Dec 4, 2019
Vote for the best answer above!
Could this be mounted upside down? I would like to mount it to the underside of my daughter's loft
Douglas B
on Apr 1, 2020
BEST ANSWER: As long as you have some plank that is horizontal, you can mount it upside down.
- Reply
- Inaccurate
- Nash D on Jun 5, 2020
- Purchased on Nov 7, 2019
BEST ANSWER: As long as you have some plank that is horizontal, you can mount it upside down.
- Reply
- Inaccurate
- Nash D on Jun 5, 2020
- Purchased on Nov 7, 2019
Vote for the best answer above!
Will this laptop holder work with #5402?
Samuel C
on Jun 10, 2020
Monoprice 3-Way Adjustable Tilting Desk Mount Bracket for 13~30in Monitors up to 33 lbs., Black
Workstream by Monoprice Laptop Holder Attachment for LCD Desk Mounts
BEST ANSWER: Yes. The laptop holder works with all vesa mounts.
- Reply
- Inaccurate
- P A on Jun 11, 2020
- Purchased on Nov 25, 2019
BEST ANSWER: Yes. The laptop holder works with all vesa mounts.
- Reply
- Inaccurate
- P A on Jun 11, 2020
- Purchased on Nov 25, 2019
Vote for the best answer above!
What thickness of clamping surface is required for stability? Tightened down fully on my desk which is about 1" thick, the stand still very clearly pivots forward under load enough that light can be seen between the clamp assembly and the top of the desk surface.
New User U
on Apr 27, 2020
Will this mount work with the Dark Matter 34" ultrawide monitor? I need a mount for my application.
A shopper
on May 11, 2020
Will this mount work on the Monoprice Dark Matter 34" Ultrawide monitor? I know it has a 75x75 VESA pattern, but it is a 1500R curve, so I want to make certain it will work correctly.
A shopper
on May 11, 2020
Are parts available for this unit? I am missing the bottom bracket and bottom screw used to secure the stand to the desk.
James M
on Jun 16, 2020
What is the weight of this mount?
New User U
on Jun 30, 2020
Questions For Similar Products
Reviews
4.3 / 5.0
521 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
297
134
48
26
16
Rated 3 out of 5
No way to adjust horizontal tilt
if the arm is extended far off center, the weight of a new 27" monitor will make it tilt a little - normal and no biggie EXCEPT that you can't adjust the horizontal to compensate. I was counting on being able to move my monitor far to the left but now when I do it's tilted enough to be quite noticeable.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Sags a bit with the arm fully extended. Easy assembly
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
It is everything advertised and the price was right Holds my TV securely
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Decent Quality Economy Mount
We're using this mount on a test bench with a 22" HP monitor. It is completely adequate for the task, and does a good job freeing up bench space. The only negative is that the clamp does require a decent bite on the desk surface to be low-wobble. We ended up running two construction screws through the provided holes in the desk mount bracket.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Rated 5 out of 5
What we needed.
As advertised. Very versatile and met the need.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Perfect place for what you need.
It's a perfect item. Fits in my big truck in the right place. I couldn't find this item anywhere else on line.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 2 out of 5
Eh, it's ok
For the price, I feel as though I received the product I paid for. The materials used in the product are solid, and it feels pretty sturdy overall. However, two things really disappointed me about the product:
1) The arm movement is really stiff - perhaps this is due to the product being newer, but moving the monitor from side to side is a bit of a workout.
2) The monitor hangs at an angle (i.e. not level) on the horizontal (side to side) axis. I tried finding ways to tighten the bolts to keep the monitor level but there was no way I could find to do so. That, more than the stiffness of the arm, is a deal breaker for me.
1) The arm movement is really stiff - perhaps this is due to the product being newer, but moving the monitor from side to side is a bit of a workout.
2) The monitor hangs at an angle (i.e. not level) on the horizontal (side to side) axis. I tried finding ways to tighten the bolts to keep the monitor level but there was no way I could find to do so. That, more than the stiffness of the arm, is a deal breaker for me.
- Was this review helpful? Yes (9) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (9) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Excellent Product.
Fast Service, and just what we needed!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products