Monoprice Triple-Motor Height-Adjustable Sit-Stand L-Shaped Corner Desk Frame, Black
Product # 34827
UPC # 889028100158
$499.99
*Affirm is not available for business or international orders
Qty:
Out of Stock
ETA: 11/10/2024
Note:
Due to limited supply, all products are sold on a first-come first-serve basis. Auto Notification does not guarantee either availability or price. All prices are subject to change without notice.
*Your information will only be used to notify you when this item becomes available.
Qty: 1
$499.99
Qty: 2-9
$484.99
Qty: 10-19
$479.99
Qty: 20-49
$474.99
Qty: 50+
$422.99
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 169 questions
Browse 169 questions
and 240 answers
Do both sections raise and lower?
A shopper
on Jul 1, 2022
BEST ANSWER: Yes. In order for the height adjustment to function, all 3 motors must be connected to the controller hub. Therefore both sections of this desk will raise and lower at the same time
- Reply
- Inaccurate
- Caleb M on Jul 1, 2022
- Purchased on Aug 17, 2021
BEST ANSWER: Yes. In order for the height adjustment to function, all 3 motors must be connected to the controller hub. Therefore both sections of this desk will raise and lower at the same time
- Reply
- Inaccurate
- Caleb M on Jul 1, 2022
- Purchased on Aug 17, 2021
yes the whole thing moves up and down as one, we have 3 in our office, they are really nice
- Reply
- Inaccurate
- John K on Jul 1, 2022
- Purchased on Jul 6, 2021
Yes. Both desk sections are attached to each other and raise/lower as one piece.
- Reply
- Inaccurate
- Greg B on Jul 11, 2022
- Purchased on Sep 12, 2021
Yes both sides are connected to the panel which raises and lowers the desk top
- Reply
- Inaccurate
- Dominic A. F on Jul 1, 2022
- Purchased on Aug 23, 2021
Yes all all 3 legs are powered the the frame is all bolted together.
- Reply
- Inaccurate
- James B on Jul 1, 2022
- Purchased on Jun 20, 2022
Yes. The three legs all raise and lower at the same place/ height.
- Reply
- Inaccurate
- Michael H on Jul 1, 2022
- Purchased on Aug 16, 2021
Yes, there is a motor in each leg and they operate together.
- Reply
- Inaccurate
- K E on Jul 11, 2022
- Purchased on Aug 26, 2021
Yes, there are three motors and the whole desk raises
- Reply
- Inaccurate
- Jeff E on Jul 11, 2022
- Purchased on Sep 15, 2021
yes the legs raise and lower as one unit. Together.
- Reply
- Inaccurate
- Chris C on Jul 11, 2022
- Purchased on Aug 27, 2021
Yes, they raise and lower in unison.
- Reply
- Inaccurate
- Blake H on Jul 1, 2022
- Purchased on Aug 16, 2021
Yes both of them simultaneously.
- Reply
- Inaccurate
- Pablo M on Jul 1, 2022
- Purchased on Jul 20, 2021
Vote for the best answer above!
Could this be used with three desktop pieces? Two equal side pieces and a separate curved corner piece?
Victoria S
on Aug 31, 2021
BEST ANSWER: You would need to build your own support structure to anchor the curved piece to the side pieces. It comes with two square metal plates meant to reinforce the short left piece with the longer right piece. The third corner piece you’re asking about would rely on the two side pieces for any sort of left/right support. It would be anchored to the corner leg motor by four screws and I could see them getting stripped without proper secondary support.
- Reply
- Inaccurate
- Evan O on Aug 31, 2021
- Purchased on Feb 16, 2021
BEST ANSWER: You would need to build your own support structure to anchor the curved piece to the side pieces. It comes with two square metal plates meant to reinforce the short left piece with the longer right piece. The third corner piece you’re asking about would rely on the two side pieces for any sort of left/right support. It would be anchored to the corner leg motor by four screws and I could see them getting stripped without proper secondary support.
- Reply
- Inaccurate
- Evan O on Aug 31, 2021
- Purchased on Feb 16, 2021
You could make this work if the size is within the min and max sizes of the desk. Look at the installation instructions. The three legs are connected via square tubes that slide inside of each other to accommodate larger and smaller tops. The top screws to the frame at the L brackets that bolt to the side of each leg. You will need mending plates or some method of attaching the 3 pieces of top together.
- Reply
- Inaccurate
- nathan w on Aug 31, 2021
- Purchased on Feb 20, 2021
There are a limited number of screw holes on the frame for securing the desk surfaces, so I would not suggest that. I wouldn't be confident that there are enough screw holes in correct places for another seam in the surfaces. I wouldn't want the surface to pull away from the screws and everything on top flip off and be smashed.
- Reply
- Inaccurate
- James C on Aug 31, 2021
- Purchased on Feb 19, 2021
Yes I believe so as they are extendable on both sides. It is a matter of seeing what is the full extended length on both sides and doing the math to accommodate all 3 pieces. It is doable.
- Reply
- Inaccurate
- Ganesh P on Aug 31, 2021
- Purchased on Feb 23, 2021
Yes, you'll have to brace it underneath though so the wood is Even across each piece. I used a flat straight brace (metal squares with screws).
- Reply
- Inaccurate
- Ernesto S on Aug 31, 2021
- Purchased on Feb 19, 2021
It can.. I made the top for my son's desk exactly that way with 3/4" mdf. One sheet is all it takes. About $45.
- Reply
- Inaccurate
- Danny B on Aug 31, 2021
- Purchased on Aug 26, 2021
I believe it could be done this way although lining up the seems of the pieces may be more difficult.
- Reply
- Inaccurate
- Steve L on Aug 31, 2021
- Purchased on Feb 23, 2021
I believe it is possible if you use brackets to connect the three table tops.
- Reply
- Inaccurate
- Alfredo R on Aug 31, 2021
- Purchased on Apr 7, 2021
Vote for the best answer above!
Can I use two 4ft table tops?
New User U
on Jan 17, 2022
BEST ANSWER: Yes, there would be no issues with that. the adjustable rails would allow for that fit.
- Reply
- Inaccurate
- Andrew C on Jan 20, 2022
- Purchased on Mar 1, 2021
BEST ANSWER: Yes, there would be no issues with that. the adjustable rails would allow for that fit.
- Reply
- Inaccurate
- Andrew C on Jan 20, 2022
- Purchased on Mar 1, 2021
Depends on the depth.
As long as both are deeper than 24" this should work , although the base will support bigger and the 4' side will be really close to the brackets. Kind of depends if you 4' table is 47, 48, 49 inches, etc.
I build a custom 6'x6' top from a sheet of plywood I had, ebonized it with India Ink and lacquered for mine and it turned out very nice. Mine is essentially made from a 6'x2' butted against a 4'x2' section and it fits very well.
As long as both are deeper than 24" this should work , although the base will support bigger and the 4' side will be really close to the brackets. Kind of depends if you 4' table is 47, 48, 49 inches, etc.
I build a custom 6'x6' top from a sheet of plywood I had, ebonized it with India Ink and lacquered for mine and it turned out very nice. Mine is essentially made from a 6'x2' butted against a 4'x2' section and it fits very well.
- Reply
- Inaccurate
- JOHN T on Jan 20, 2022
- Purchased on Feb 22, 2021
Yes you can but it will be pretty tight. Both table lengths are adjustable but you're going to be right on the edge of the shortest adjustment. Brackets mounted right on the edges of the table top with no overhang. I used one 4ft and one 6ft to get an equal workspace on both lengths. Two 4ft tops will give you a workspace with one 4ft length and one 2ft length making an L.
- Reply
- Inaccurate
- Nick L on Jan 21, 2022
- Purchased on Feb 23, 2021
yes, it would be 48x24, it's the size that suits me in the space I have free. I was happy to know that it is possible to use this support for this size of table tops, because in my research I didn't find anything more interesting in relation to cost and benefit. Thank you all so much for the help😊🙏
- Reply
- Inaccurate
- New User U on Jan 20, 2022
- Purchased on Jan 17, 2022
Yes, I have one 4ft and one5ft, no issues been using it now for over a year
- Reply
- Inaccurate
- Jose R on Jan 21, 2022
- Purchased on Feb 24, 2021
I don't think so. From one end to the other you'll need 5 ft.
- Reply
- Inaccurate
- Gilbert S on Jan 21, 2022
- Purchased on Mar 17, 2021
You can if you adjust the desk to be those lengths.
- Reply
- Inaccurate
- New User U on Jan 20, 2022
- Purchased on Feb 27, 2021
Vote for the best answer above!
Can I put granite on top?
A shopper
on Oct 17, 2021
BEST ANSWER: weight would be the only concern - the maximum weight noted in the Specs is 265...so...depending on the size of the desktop you install, it's thickness and what other items you'll have...you just need to make sure you won't be over the limit.
- Reply
- Inaccurate
- Joseph Z on Oct 18, 2021
- Purchased on Dec 12, 2020
BEST ANSWER: weight would be the only concern - the maximum weight noted in the Specs is 265...so...depending on the size of the desktop you install, it's thickness and what other items you'll have...you just need to make sure you won't be over the limit.
- Reply
- Inaccurate
- Joseph Z on Oct 18, 2021
- Purchased on Dec 12, 2020
The desk specs a maximum lift weight of 265lbs. I would suggest weighing the slab you're planning to use and consider that anything else you add like computers, monitors, TVs, and coffee are also going to contribute to that weight limit.
- Reply
- Inaccurate
- Tim P on Oct 19, 2021
- Purchased on Oct 22, 2020
If the granite top and all your equipment (monitors,cpu,etc.) are under the stand weight limit, then yes.
- Reply
- Inaccurate
- Don C on Oct 18, 2021
- Purchased on Jan 7, 2021
I’d recommend looking at the user manual for max weight. The link is within the product description
- Reply
- Inaccurate
- GLENN WILLIAMS on Oct 17, 2021
- Purchased on Nov 17, 2020
You might be pushing the motors limitation. Check max weight it can hold!
- Reply
- Inaccurate
- howard t on Oct 17, 2021
- Purchased on Feb 15, 2021
You would want a VERY thin piece of granite or quartz.
- Reply
- Inaccurate
- New User U on Dec 10, 2022
- Purchased on Dec 9, 2022
Vote for the best answer above!
Can the frame be modified to support shallower desktops? I'd like to use my existing desktop which is 50cm (19.7") deep. The arms where the desktop is mounted are 23.6" deep. Will the stability be compromised if you shorten the arms by sawing off one of the mounting screw holes on each arm?
A shopper
on Jun 24, 2021
BEST ANSWER: You would have to cut the metal extensions, I have a 22" width on one side and I had to cut the arm with a sawzall. You can cut it and still have space for one screw to hold the side in place.
- Reply
- Inaccurate
- Abraham V on Jun 24, 2021
- Purchased on Jul 13, 2020
BEST ANSWER: You would have to cut the metal extensions, I have a 22" width on one side and I had to cut the arm with a sawzall. You can cut it and still have space for one screw to hold the side in place.
- Reply
- Inaccurate
- Abraham V on Jun 24, 2021
- Purchased on Jul 13, 2020
Stability will not be compromised at all. I had so do the same down one side. If needed you can drill an additional hole in the remaining part of the arm yourself to add another screw. Should be just fine.
- Reply
- Inaccurate
- Tim H on Jun 24, 2021
- Purchased on Aug 5, 2020
Yes can be modified. If you shorten the arms to the depth of the desk equally and re drill mounting holes there shouldn’t be any compromise in stability. Cutting off one side may cause an imbalance.
- Reply
- Inaccurate
- Geoffrey L on Jun 24, 2021
- Purchased on Aug 11, 2020
I think that it could be done, you would just want to drill new holes possibly for screws. Overall I'm really satisfied with the desk, it's rugged and works well Everytime.
- Reply
- Inaccurate
- Joe R on Jun 24, 2021
- Purchased on Aug 7, 2020
Vote for the best answer above!
Is this the kind of controller that starts the motors slowly or does it run at full speed suddenly? Is it the same for both the 2-leg and the 3-leg versions?
A shopper
on Oct 17, 2020
Monoprice Triple-Motor Height-Adjustable Sit-Stand L-Shaped Corner Desk Frame, Black
Monoprice Sit-Stand Dual-Motor Height Adjustable Table Desk Frame, Electric, White
BEST ANSWER: I have the 3 leg version and the motor starts slowly, goes a set slow speed and finishes off slowly at about the last inch towards final height. Only thing to consider is it has no safety stop in case of an office chair with arms shoved under while elevated and adjusting downwards. I had this happen once. Otherwise I am pleased with performance. It is quiet and has worked perfectly for the past year as I work remote and use daily.
- Reply
- Inaccurate
- Daniel g on Oct 17, 2020
BEST ANSWER: I have the 3 leg version and the motor starts slowly, goes a set slow speed and finishes off slowly at about the last inch towards final height. Only thing to consider is it has no safety stop in case of an office chair with arms shoved under while elevated and adjusting downwards. I had this happen once. Otherwise I am pleased with performance. It is quiet and has worked perfectly for the past year as I work remote and use daily.
- Reply
- Inaccurate
- Daniel g on Oct 17, 2020
I have the 3 leg and its the best ergonomic purchase I've ever made. The motors seem pretty chill - I don't know if they actually ramp up in speed, but it's not like you're going to accidentally floor it into your knees or something. It also has a presets which are really convenient for consistently taking it to your preferred sitting and standing heights.
- Reply
- Inaccurate
- Neil F on Oct 17, 2020
Vote for the best answer above!
Can the 5ft table top be used with this instead of the 4ft table top?
New User U
on Mar 19, 2021
BEST ANSWER: Yes just let it have overhang. It is a very strong frame with excellent motors. I have two tree slabs made together 72” long each way attached to mine. They are 2” thick
- Reply
- Inaccurate
- Michael B on Mar 20, 2021
- Purchased on Apr 20, 2020
BEST ANSWER: Yes just let it have overhang. It is a very strong frame with excellent motors. I have two tree slabs made together 72” long each way attached to mine. They are 2” thick
- Reply
- Inaccurate
- Michael B on Mar 20, 2021
- Purchased on Apr 20, 2020
I installed 2 6 foot ones.. wife loves it..
- Reply
- Inaccurate
- don h on Mar 20, 2021
- Purchased on Apr 27, 2020
I have two 5 ft. table sections I used for my desk on these legs.. In fact the left side has a curved end so it is 5 1/2 ft long. It works terrific.
- Reply
- Inaccurate
- Michael R on Mar 21, 2021
- Purchased on Jun 1, 2020
Vote for the best answer above!
What are the measurements of the three perpendicular supports above each leg?
New User U
on Jul 12, 2022
BEST ANSWER: Depends on how extended they are, but roughly 24" all the way down, but add 1 1/2" for the foot and another 1 1/2" for the horizontal piece attached to the desktop. So about 27" all the way down. Might be slightly lower as my boss has the desk and he has a filing cabinet in the way. With the legs extended all the way, you're looking at about 48" for the legs, plus the 3" for the other two pieces mentioned above, which puts it at about 51" high. Hope that helps!
P.S. For those that might want metric, think 129.5 cm up and 68.5 all the way down.
P.S. For those that might want metric, think 129.5 cm up and 68.5 all the way down.
- Reply
- Inaccurate
- BRIAN R. on Jul 25, 2022
- Purchased on Nov 5, 2021
BEST ANSWER: Depends on how extended they are, but roughly 24" all the way down, but add 1 1/2" for the foot and another 1 1/2" for the horizontal piece attached to the desktop. So about 27" all the way down. Might be slightly lower as my boss has the desk and he has a filing cabinet in the way. With the legs extended all the way, you're looking at about 48" for the legs, plus the 3" for the other two pieces mentioned above, which puts it at about 51" high. Hope that helps!
P.S. For those that might want metric, think 129.5 cm up and 68.5 all the way down.
P.S. For those that might want metric, think 129.5 cm up and 68.5 all the way down.
- Reply
- Inaccurate
- BRIAN R. on Jul 25, 2022
- Purchased on Nov 5, 2021
Vote for the best answer above!
Would this work with a 5 foot and 3 foot piece as tops?
Robert B
on Nov 27, 2022
BEST ANSWER: Yes, I believe it would. I used it with miss matched top sizes (pretty close to your sizes) and it worked perfectly. Make sure the two tops are mounted to each other (commonly done with floating cubicle desktops) underneath, and ensure the total outside measurements of each side don’t exceed the max width of each side of the adjustable legs. Also, note to ensure each leg is exactly plum/perpendicular when assembling. Motor will be super quiet and smooth!
- Reply
- Inaccurate
- Kenneth P on Nov 30, 2022
- Purchased on Feb 24, 2022
BEST ANSWER: Yes, I believe it would. I used it with miss matched top sizes (pretty close to your sizes) and it worked perfectly. Make sure the two tops are mounted to each other (commonly done with floating cubicle desktops) underneath, and ensure the total outside measurements of each side don’t exceed the max width of each side of the adjustable legs. Also, note to ensure each leg is exactly plum/perpendicular when assembling. Motor will be super quiet and smooth!
- Reply
- Inaccurate
- Kenneth P on Nov 30, 2022
- Purchased on Feb 24, 2022
The length of each side is adjustable. My installation is 6' and 4', and it seems to have enough adjustment underneath that 5' and 3' tops would work.
- Reply
- Inaccurate
- Jeff M on Nov 28, 2022
- Purchased on Nov 28, 2021
I dont think so, the frame is limited in how short it can get.
- Reply
- Inaccurate
- Joseph A on Dec 7, 2022
- Purchased on Mar 10, 2022
Vote for the best answer above!
What is the height of the frame when completely lowered (without a desk top)? I am planning a U shaped work station and need to know what height to set my legs for the non-raising section.
Steven J
on Mar 14, 2023
BEST ANSWER: The legs when at their lowest setting are 2 feet high. All three legs move so the entire setup will go up and down based on the control and your presets.
- Reply
- Inaccurate
- David E on Mar 20, 2023
- Purchased on May 6, 2022
BEST ANSWER: The legs when at their lowest setting are 2 feet high. All three legs move so the entire setup will go up and down based on the control and your presets.
- Reply
- Inaccurate
- David E on Mar 20, 2023
- Purchased on May 6, 2022
24" from floor to top of frame without desk top. I hope this helped. We are very happy with the adjustable desks we have bouhgt.
- Reply
- Inaccurate
- Nathan J on Mar 20, 2023
- Purchased on May 11, 2022
23.5" to top of frame when completely lowered. Add any thickness for desktop to be used.
- Reply
- Inaccurate
- Thomas G on Mar 21, 2023
- Purchased on May 5, 2022
Vote for the best answer above!
Can I use 2 6ft tabletops or does it have to be 4ft and 6ft combination? I'm trying maximize the surface area.
A shopper
on Nov 21, 2018
BEST ANSWER: Hi, if using the Monoprice desktops directly, we recommend using the 4ft + 6ft combination to ensure that the desktops will be supported by the frame while avoiding unsupported overhangs. Using 2 of our 6ft desktops directly is not recommended because one side will end up too long beyond the frame, even at full extension.
It is possible to use bigger desktops, but it is important to check it the desktops might need to be reinforced or if they are made from material that could tolerate overhangs without affecting long term shape and durability. Hope this helps. Thanks.
It is possible to use bigger desktops, but it is important to check it the desktops might need to be reinforced or if they are made from material that could tolerate overhangs without affecting long term shape and durability. Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Nov 26, 2018
BEST ANSWER: Hi, if using the Monoprice desktops directly, we recommend using the 4ft + 6ft combination to ensure that the desktops will be supported by the frame while avoiding unsupported overhangs. Using 2 of our 6ft desktops directly is not recommended because one side will end up too long beyond the frame, even at full extension.
It is possible to use bigger desktops, but it is important to check it the desktops might need to be reinforced or if they are made from material that could tolerate overhangs without affecting long term shape and durability. Hope this helps. Thanks.
It is possible to use bigger desktops, but it is important to check it the desktops might need to be reinforced or if they are made from material that could tolerate overhangs without affecting long term shape and durability. Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Nov 26, 2018
Hi, just to give an update, this product now ships with the plates that connect the desktop pieces. We will upload an updated manual shortly to reflect this information. Thank you.
- Reply
- Inaccurate
- Irv S Staff on Dec 4, 2018
The manual looks like a 4ft top with a 6ft top. Plus you have to buy the plates to hold both pieces together. I do agree two six foot pieces would be great.
- Reply
- Inaccurate
- New User U on Nov 25, 2018
Vote for the best answer above!
Could two 60" x 30" tops be used with this stand?
A shopper
on Jul 5, 2019
BEST ANSWER: Hi, it might work but it would depend on your desktop material. Some desktop materials can tolerate more overhang, while some materials could sag over time or could become less durable if a large area is not supported by the frame. Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Jul 9, 2019
BEST ANSWER: Hi, it might work but it would depend on your desktop material. Some desktop materials can tolerate more overhang, while some materials could sag over time or could become less durable if a large area is not supported by the frame. Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Jul 9, 2019
You can, just know that one leg will become 90” long when you form the L shape. While the frame will support a 90” leg, I chose to cut 30” from one 60” x 30” piece to accommodate my office space giving me an L that is 60” x 60”. I used these tips from Ikea, very affordable and easy to cut: (ikea) linnmon-tabletop-white-20251139
- Reply
- Inaccurate
- Chris B on Jul 6, 2019
- Purchased on Jun 20, 2019
I went to 78 inches with great support (48 against 30) so your 90 inch side should be fine.
- Reply
- Inaccurate
- John W on Jul 5, 2019
Vote for the best answer above!
Can I add wheels?
A shopper
on Apr 4, 2021
BEST ANSWER: If you can find wheels that thread into the holes intended for the leveling feet, I'm sure you could attach them. I'm not sure it would be wise, however. This thing is big and heavy. I have a hard time imagining a situation where it would be useful to move it around very often. It might also wobble more on wheel than it would with the feet.
- Reply
- Inaccurate
- Ryan M on Apr 6, 2021
- Purchased on Sep 22, 2020
BEST ANSWER: If you can find wheels that thread into the holes intended for the leveling feet, I'm sure you could attach them. I'm not sure it would be wise, however. This thing is big and heavy. I have a hard time imagining a situation where it would be useful to move it around very often. It might also wobble more on wheel than it would with the feet.
- Reply
- Inaccurate
- Ryan M on Apr 6, 2021
- Purchased on Sep 22, 2020
I have not not added wheels, but have been planning to do so. I believe the single support bar will create the biggest challenge. Here are some wheels on amazon I am looking at using:
Moogiitools-1000lbs-Swivel-Locking-Casters
Moogiitools-1000lbs-Swivel-Locking-Casters
- Reply
- Inaccurate
- Don C on Apr 4, 2021
- Purchased on Jan 7, 2021
the foot have leveling pedestals that screw in. In theory...you could get a caster set that achieves what you want, but wheels are not an option for purchase *with* the desk kit...you'll have to source external of Monoprice.
- Reply
- Inaccurate
- Joseph Z on Apr 9, 2021
- Purchased on Dec 12, 2020
Vote for the best answer above!
I am interested in this to build my own custom top with cable management grommets built in and cable management bays also, so I only have 1 power cable and the line for my sub on the floor. If I made the dimensions of the top 2"Hx4'Lx30"W and 2"Hx6'Lx30"W with the supports centered in the mass of the tops would it be stable with the extra over hang? I plan to route out slots in the top for the supports to actually slid into and then secure it. Plan to make it out of edge jointed hardwoods, so I am not super worried about the material bowing, more the desk falling over.
Andrew P
on May 27, 2021
BEST ANSWER: Last month, I made a desktop out of MDF that is nearly the same dimensions (+/-1 inch) and the desk is totally stable. With that said, I used 3/4 inch MDF. A 2" thick desktop seems somewhat excessive to me, particularly if it's made out of hardwood. My desktop is in the 60-75 lb range, I am not sure how that compares to 2" thick hardwood. why design the desk so thick? 1" should be more than enough, and you can always put a 2" thick band around the edges if you prefer the look of a 2" thickness. Just a thought.
- Reply
- Inaccurate
- John S on May 27, 2021
- Purchased on Mar 27, 2021
BEST ANSWER: Last month, I made a desktop out of MDF that is nearly the same dimensions (+/-1 inch) and the desk is totally stable. With that said, I used 3/4 inch MDF. A 2" thick desktop seems somewhat excessive to me, particularly if it's made out of hardwood. My desktop is in the 60-75 lb range, I am not sure how that compares to 2" thick hardwood. why design the desk so thick? 1" should be more than enough, and you can always put a 2" thick band around the edges if you prefer the look of a 2" thickness. Just a thought.
- Reply
- Inaccurate
- John S on May 27, 2021
- Purchased on Mar 27, 2021
I find the stand to be very sturdy. I don't see any issue with the dimensions you have. The overhang is not a problem.
If I understand your description correctly you are going to make the top out of 2 inch thick hardwood?
If that is the case, I would recommend you look at the listed weight limit and match that with the weight of the wood you are using.
Have fun. I really enjoy using the custom top I built for my corner desk. It was easy to assemble and ais a joy to use.
If I understand your description correctly you are going to make the top out of 2 inch thick hardwood?
If that is the case, I would recommend you look at the listed weight limit and match that with the weight of the wood you are using.
Have fun. I really enjoy using the custom top I built for my corner desk. It was easy to assemble and ais a joy to use.
- Reply
- Inaccurate
- tevye b on May 27, 2021
- Purchased on Mar 28, 2021
It shouldn’t be a problem. The legs are very stable. I just screwed the frame directly into the top and it’s very sturdy. You don’t even need to route out the slots if you don’t want to.
- Reply
- Inaccurate
- Myles D on Jun 8, 2021
- Purchased on Feb 27, 2021
Vote for the best answer above!
Would I be able to use a 72”x30”, and 60”x30” set as table tops for this L-Shaped desk? Also, what is the weight limit on this? Can I use a triple monitor setup after having a wooden tabletop?
Srinivas S
on Jul 19, 2021
BEST ANSWER: The short answer is yes- if you look on the product page you can see the min lengths are 55 inches and the max extension is 71. You can run over that 71 inches- you're really only bound by the strength of your top (and what you may put on that unsupported end.
Lift max is 265 pounds (on product full spec tab).
The 3 motors are not located w/in the legs- they're units you mount on your top. So yes- you can use the motors w/ a wooden top (or any other top you choose). I found it best to mount them in between the extension rails and roughly where each leg was (left/center/right). Important to know they need to be mounted on the top though- there's a sensor in there that determines how low the unit can move.
Lift max is 265 pounds (on product full spec tab).
The 3 motors are not located w/in the legs- they're units you mount on your top. So yes- you can use the motors w/ a wooden top (or any other top you choose). I found it best to mount them in between the extension rails and roughly where each leg was (left/center/right). Important to know they need to be mounted on the top though- there's a sensor in there that determines how low the unit can move.
- Reply
- Inaccurate
- GLENN WILLIAMS on Jul 21, 2021
- Purchased on Nov 17, 2020
BEST ANSWER: The short answer is yes- if you look on the product page you can see the min lengths are 55 inches and the max extension is 71. You can run over that 71 inches- you're really only bound by the strength of your top (and what you may put on that unsupported end.
Lift max is 265 pounds (on product full spec tab).
The 3 motors are not located w/in the legs- they're units you mount on your top. So yes- you can use the motors w/ a wooden top (or any other top you choose). I found it best to mount them in between the extension rails and roughly where each leg was (left/center/right). Important to know they need to be mounted on the top though- there's a sensor in there that determines how low the unit can move.
Lift max is 265 pounds (on product full spec tab).
The 3 motors are not located w/in the legs- they're units you mount on your top. So yes- you can use the motors w/ a wooden top (or any other top you choose). I found it best to mount them in between the extension rails and roughly where each leg was (left/center/right). Important to know they need to be mounted on the top though- there's a sensor in there that determines how low the unit can move.
- Reply
- Inaccurate
- GLENN WILLIAMS on Jul 21, 2021
- Purchased on Nov 17, 2020
The 72x30” should fit without issue, but I would expect some overhang with the 60x30” piece.
Weight limit is advertised as 265 lbs; this should be sufficient for your described setup.
For reference, I have a wooden table top with two ultrawide monitors & articulating mounts, which comes out to just under 165 pounds in total. The motors are more than sufficient to raise and lower my setup without issue.
Weight limit is advertised as 265 lbs; this should be sufficient for your described setup.
For reference, I have a wooden table top with two ultrawide monitors & articulating mounts, which comes out to just under 165 pounds in total. The motors are more than sufficient to raise and lower my setup without issue.
- Reply
- Inaccurate
- Mike M on Jul 21, 2021
- Purchased on Oct 6, 2020
The weight limit is 265lbs. I've had multiple 30" 4k monitors and a couple heavy Mac Pro Towers on mine with no issue. Even using a large wood tabletop. You should be fine with those size table tops. I used 24" deep tops, but 30 should still work. How thick is your wood/what does it weigh? The triple monitor setup plus random accessories can't be more than ~65lbs, leaving 200 for the wood easily.
- Reply(1)
- Inaccurate
- Steven Y on Jul 21, 2021
- Purchased on Oct 2, 2020
Steven, Thanks much for your reply. I am finding a lot of 24" depth tops, but was wondering how that would fit with this, given that the legs seem to be 27.5" wide? are you not finding this to be an issue?
- Reply
- Srinivas S on Jul 23, 2021
Vote for the best answer above!
is it possible to convert this desk to a straight desk and only use 2 motors instead of 3? or will the motor controller only work if all ports are plugged in?
A shopper
on Aug 27, 2021
BEST ANSWER: This would be a bad idea. The controller would definitely work, but there are many cheaper straight table bases you could use. And the way the legs work, one side of your straight table would be very unstable.
- Reply
- Inaccurate
- Steven Y on Aug 27, 2021
- Purchased on Oct 2, 2020
BEST ANSWER: This would be a bad idea. The controller would definitely work, but there are many cheaper straight table bases you could use. And the way the legs work, one side of your straight table would be very unstable.
- Reply
- Inaccurate
- Steven Y on Aug 27, 2021
- Purchased on Oct 2, 2020
Thet have a two motor standup desk now: no need to convert.
- Reply
- Inaccurate
- Trevor O on Aug 28, 2021
- Purchased on Sep 16, 2020
Vote for the best answer above!
Is this just the stand or does it also come with the table top? Is the frame adjustable? I have a 47x47 area. Would this work?
A shopper
on Sep 20, 2021
BEST ANSWER: The picture on the page is very detailed. One side will go from 48.8" to 70.9" and the other side will go from 51.1" to 70.9". This means the smallest it will be is 48.8" x 51.1" and the largest is 70.9" to 70.9".
This item is only for the legs and brackets to mount to a desk surface provided by you. It does not come with a desk surface!
This item is only for the legs and brackets to mount to a desk surface provided by you. It does not come with a desk surface!
- Reply
- Inaccurate
- Carl D on Sep 20, 2021
- Purchased on Feb 26, 2021
BEST ANSWER: The picture on the page is very detailed. One side will go from 48.8" to 70.9" and the other side will go from 51.1" to 70.9". This means the smallest it will be is 48.8" x 51.1" and the largest is 70.9" to 70.9".
This item is only for the legs and brackets to mount to a desk surface provided by you. It does not come with a desk surface!
This item is only for the legs and brackets to mount to a desk surface provided by you. It does not come with a desk surface!
- Reply
- Inaccurate
- Carl D on Sep 20, 2021
- Purchased on Feb 26, 2021
It is just the stand, no tabletop.
Yes, both parts of the frame are adjustable.
No, 47"x47" wouldn't be enough because the minimal dimensions of the frame even without a tabletop are 48.8"x55.1".
Yes, both parts of the frame are adjustable.
No, 47"x47" wouldn't be enough because the minimal dimensions of the frame even without a tabletop are 48.8"x55.1".
- Reply
- Inaccurate
- KEP P on Sep 20, 2021
- Purchased on Feb 12, 2021
Just the frame, no tabletop. Looks like the min distance on the image is 48.8" and 55.1" so if that is too large then this will not work for your space.
- Reply
- Inaccurate
- Nicholas S on Sep 20, 2021
- Purchased on Jan 20, 2021
Vote for the best answer above!
What are the two largest tabletops this can support? Could this support two 80x30 pieces? If not, how about 80x30 and a 72x30? If not, how about two 72x30 pieces?
A shopper
on Apr 15, 2022
BEST ANSWER: I think you would be fine with all options but check their specs. It should say. Keep in mind the legs are pretty wide. My legs turned out to be wider than my desk so there is a big gap btw desk and wall. Basically make sure your top is wider than the legs if u want it flush with your wall. Also keep in mind there is a weight capacity.
- Reply
- Inaccurate
- David P on Apr 18, 2022
- Purchased on Mar 21, 2022
BEST ANSWER: I think you would be fine with all options but check their specs. It should say. Keep in mind the legs are pretty wide. My legs turned out to be wider than my desk so there is a big gap btw desk and wall. Basically make sure your top is wider than the legs if u want it flush with your wall. Also keep in mind there is a weight capacity.
- Reply
- Inaccurate
- David P on Apr 18, 2022
- Purchased on Mar 21, 2022
I’m not 100% sure. Mins was about 60x60 but the frame expands larger. I have a corner glass top. So I drilled self taps in the frame. I left off the middle bar support because it sticks out. So if your just using solid would or something it should be easy.
- Reply
- Inaccurate
- JOSHUA J on Apr 18, 2022
- Purchased on Mar 2, 2022
I have 2x 72x30's, the left side is hanging over by a foot and a half, the other side you could easily fit a 80x30 on it since it runs the whole length of the frame.
- Reply
- Inaccurate
- Jay on Apr 18, 2022
- Purchased on Mar 7, 2022
Vote for the best answer above!
I am getting an error "E60" on my desk after not using it for a while, does anyone know what this error code means?
A shopper
on Jul 14, 2023
BEST ANSWER: I had this issue as well. after i looked it up. It is basically a reset so might have held the down button to long and its a reset. *word of advice: take everything off your desk. i reset mine to the lowest it could go and my desk tilted a little i had to lift the 1 side up as it went down faster as to not break my custom table. i unplugged the motors but it didnt help. just be careful it freaked me out at first when it happened.
- Reply
- Inaccurate
- Kyle L on Jul 15, 2023
- Purchased on Jul 21, 2022
BEST ANSWER: I had this issue as well. after i looked it up. It is basically a reset so might have held the down button to long and its a reset. *word of advice: take everything off your desk. i reset mine to the lowest it could go and my desk tilted a little i had to lift the 1 side up as it went down faster as to not break my custom table. i unplugged the motors but it didnt help. just be careful it freaked me out at first when it happened.
- Reply
- Inaccurate
- Kyle L on Jul 15, 2023
- Purchased on Jul 21, 2022
The controller that comes with the desk doesn't match the manual anymore. Looking at another manual that matches the updated menus: E60 - Out-of-step protection
Check and ensure the motors of each leg are at an identical height and their
connection to the controller is correct as per the Assembly Instructions, then power
the desk off and on again or follow the Stroke Reset Process.
Check and ensure the motors of each leg are at an identical height and their
connection to the controller is correct as per the Assembly Instructions, then power
the desk off and on again or follow the Stroke Reset Process.
- Reply
- Inaccurate
- Diego V on Jul 16, 2023
- Purchased on Jul 22, 2022
Have you unplug the power to have it reset?
- Reply
- Inaccurate
- Tam N on Jul 15, 2023
- Purchased on Jul 29, 2022
Vote for the best answer above!
For the Workstream Triple Motor Height Adjustable Sit-Stand Corner Desk Frame, 3-Leg Corner L-Shaped Table Base, can the "L" shaped configuration, be the 5' wide section with the 6' section?
Emil M
on Jul 19, 2019
Monoprice Triple-Motor Height-Adjustable Sit-Stand L-Shaped Corner Desk Frame, Black
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 6ft Black, Compatible with Electric Desks
BEST ANSWER: Hi, this combination is possible. You will just have a longer overhang on one side of the 5ft desktop than if you were using a 4ft top. This is still OK, just avoid excessive loads on the overhang for long-term durability and to prevent sagging over time. Thanks for checking.
- Reply(1)
- Inaccurate
- Irv S Staff on Jul 22, 2019
Thank you. One more question. Why do the instructions show the 6ft table being installed on the right side such that it is not equally supported (the middle arm is 90 degrees to the end arm. It would seem that the 6ft panel should go on the left side as you stand in the "v" shape so the top is equally supported on the arms that are set at parallel to each other, giving better support for the smaller top via the mating plates.
Hi, thanks for bringing this up. You are correct, that orientation is probably not the most optimal way to mount the desktop, switching the tops to provide more support for the longer top would be better. We'll update the manual to reflect it. Having said that, the tops would still be supported sufficiently by the length of the frame and the mounting plates. Thanks for the feedback.
BEST ANSWER: Hi, this combination is possible. You will just have a longer overhang on one side of the 5ft desktop than if you were using a 4ft top. This is still OK, just avoid excessive loads on the overhang for long-term durability and to prevent sagging over time. Thanks for checking.
- Reply(1)
- Inaccurate
- Irv S Staff on Jul 22, 2019
Thank you. One more question. Why do the instructions show the 6ft table being installed on the right side such that it is not equally supported (the middle arm is 90 degrees to the end arm. It would seem that the 6ft panel should go on the left side as you stand in the "v" shape so the top is equally supported on the arms that are set at parallel to each other, giving better support for the smaller top via the mating plates.
Hi, thanks for bringing this up. You are correct, that orientation is probably not the most optimal way to mount the desktop, switching the tops to provide more support for the longer top would be better. We'll update the manual to reflect it. Having said that, the tops would still be supported sufficiently by the length of the frame and the mounting plates. Thanks for the feedback.
Thank you for your question.
Since the width of the desk is adjustable you would be able to have a 5' and 6' long desktop.
Since the width of the desk is adjustable you would be able to have a 5' and 6' long desktop.
- Reply
- Inaccurate
- Tyler C Staff on Jul 22, 2019
Vote for the best answer above!
How quickly does the table raise and lower? (in inches/second, for example)
Jace B
on Nov 25, 2019
BEST ANSWER: I have not timed it but the seed is fine smooth and balanced. this is a great desk
- Reply
- Inaccurate
- New User U on Nov 26, 2019
- Purchased on Nov 1, 2019
BEST ANSWER: I have not timed it but the seed is fine smooth and balanced. this is a great desk
- Reply
- Inaccurate
- New User U on Nov 26, 2019
- Purchased on Nov 1, 2019
estimated to be about an inch per second...but eases into and out of the motion.
- Reply
- Inaccurate
- Joseph Z on Apr 9, 2021
- Purchased on Dec 12, 2020
Vote for the best answer above!
I installed 2 6ft table tops on this sit-stand corner desk and they are level with the power off. When I turn on the power, the controller shows "60.0" and cannot go up or down after a half second of trying. What should the controller show when the desk is at its lowest and highest points?
I am worried the controller and/or motors are stuck in opposite land.
I am worried the controller and/or motors are stuck in opposite land.
New User U
on Sep 9, 2020
BEST ANSWER: I believe 120 is the highest setting. Not certain about the lowest- I cannot drop mine to that setting b/c of setup. I would say regarding the inability of movement, check the bricks where your motor cables plugi in (all of them). I've found if they're crooked or those are not level with each other the processor will not allow for proper movement.
- Reply
- Inaccurate
- GLENN WILLIAMS on Jun 14, 2021
- Purchased on Nov 17, 2020
BEST ANSWER: I believe 120 is the highest setting. Not certain about the lowest- I cannot drop mine to that setting b/c of setup. I would say regarding the inability of movement, check the bricks where your motor cables plugi in (all of them). I've found if they're crooked or those are not level with each other the processor will not allow for proper movement.
- Reply
- Inaccurate
- GLENN WILLIAMS on Jun 14, 2021
- Purchased on Nov 17, 2020
60 is the Bottom, and 125 is the top.
- Reply(1)
- Inaccurate
- Eric H on Jun 14, 2021
Thanks, I later found the problem to be a loose connector on 1 of the motors. Very hard to troubleshoot when no mention of the numbers in the manual?
- Reply
- New User U on Jun 14, 2021
Vote for the best answer above!
Does this frame work with the Ikea Corner desktop?
Can we screw the desktop onto the frame? Or will it just lay on top?
Can we screw the desktop onto the frame? Or will it just lay on top?
A shopper
on Feb 13, 2021
BEST ANSWER: You definitely have to screw it down. If the ikea desk is within The size of what this frame handles, I see no reason why it wouldn't work.
- Reply
- Inaccurate
- don h on Feb 13, 2021
- Purchased on Apr 27, 2020
BEST ANSWER: You definitely have to screw it down. If the ikea desk is within The size of what this frame handles, I see no reason why it wouldn't work.
- Reply
- Inaccurate
- don h on Feb 13, 2021
- Purchased on Apr 27, 2020
It screws to any top created.
- Reply
- Inaccurate
- Michael B on Feb 13, 2021
- Purchased on Apr 20, 2020
Vote for the best answer above!
Can I use 2 of the 4ft tabletops for this since the 6ft tabletop is out of stock?
Siddharth A
on May 5, 2021
Monoprice Triple-Motor Height-Adjustable Sit-Stand L-Shaped Corner Desk Frame, Black
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 6ft Black, Compatible with Electric Desks
Workstream by Monoprice Table Top for Sit-Stand Height Adjustable Desk, 4ft Black (open box)
BEST ANSWER: Yes that should work since the width of the tabletop will take up the rest of the corner space for the longer span.
- Reply
- Inaccurate
- Nicholas S on May 21, 2021
- Purchased on Jan 20, 2021
BEST ANSWER: Yes that should work since the width of the tabletop will take up the rest of the corner space for the longer span.
- Reply
- Inaccurate
- Nicholas S on May 21, 2021
- Purchased on Jan 20, 2021
Vote for the best answer above!
I don't quite understand how to reverse the desk tops. Making the other side the larger side. Do I need to change the way I build it underneath in anyway? Or do I simply put the desktops how I want them and screw them in?
A shopper
on Nov 30, 2021
BEST ANSWER: I made the left side the long side and the right side the short one, if that makes sense? no need to build it underneath. Yes just screw the tops on
- Reply
- Inaccurate
- DAN S on Nov 30, 2021
- Purchased on Feb 7, 2021
BEST ANSWER: I made the left side the long side and the right side the short one, if that makes sense? no need to build it underneath. Yes just screw the tops on
- Reply
- Inaccurate
- DAN S on Nov 30, 2021
- Purchased on Feb 7, 2021
Just put them the way you want. I have swapped twice when I rotate the desk in my room. Just rescrew…
- Reply
- Inaccurate
- Joseph Z on Nov 30, 2021
- Purchased on Dec 12, 2020
Vote for the best answer above!
Can someone help me understand the following measurements advertised for this product? 27.6" x 67.0" x 47.2".
Are these measurements for the frame or the table top? And is the table
Top 1 piece or multiple pieces?
Are these measurements for the frame or the table top? And is the table
Top 1 piece or multiple pieces?
A shopper
on Sep 29, 2022
BEST ANSWER: Measurements are for the frame. You need to add your own table top. I grabbed a couple bamboo tops from ikea and they fit really well.
- Reply
- Inaccurate
- Raymond S on Oct 17, 2022
- Purchased on Nov 17, 2021
BEST ANSWER: Measurements are for the frame. You need to add your own table top. I grabbed a couple bamboo tops from ikea and they fit really well.
- Reply
- Inaccurate
- Raymond S on Oct 17, 2022
- Purchased on Nov 17, 2021
THE TABLE TOPS DO NOT COME WITH THE FRAME
- Reply
- Inaccurate
- john g on Oct 17, 2022
- Purchased on Dec 3, 2021
Vote for the best answer above!
Monoprice always shows the table top are out of stock. Can someone suggest the table top measurement and the link for an affordable table top?
New User U
on Jan 23, 2023
BEST ANSWER: I have two of these frames. I bought a 1/2 inch sheet of plywood and cut it to the size I wanted. Sanded it and painted it Red! :).
The frame is adjustable so you can make it different sizes. Mine top is 24"x70". I bought a 6'x8' sheet of plywood to make it. Because I went so large its 2 pieces but I made both of them from one sheet of plywood.
The frame is adjustable so you can make it different sizes. Mine top is 24"x70". I bought a 6'x8' sheet of plywood to make it. Because I went so large its 2 pieces but I made both of them from one sheet of plywood.
- Reply(1)
- Inaccurate
- MICHAEL H on Jan 27, 2023
- Purchased on Feb 17, 2022
Thank you for your reply, this is helpful.
- Reply
- New User U on Jan 27, 2023
BEST ANSWER: I have two of these frames. I bought a 1/2 inch sheet of plywood and cut it to the size I wanted. Sanded it and painted it Red! :).
The frame is adjustable so you can make it different sizes. Mine top is 24"x70". I bought a 6'x8' sheet of plywood to make it. Because I went so large its 2 pieces but I made both of them from one sheet of plywood.
The frame is adjustable so you can make it different sizes. Mine top is 24"x70". I bought a 6'x8' sheet of plywood to make it. Because I went so large its 2 pieces but I made both of them from one sheet of plywood.
- Reply(1)
- Inaccurate
- MICHAEL H on Jan 27, 2023
- Purchased on Feb 17, 2022
Thank you for your reply, this is helpful.
- Reply
- New User U on Jan 27, 2023
The Swedish name for the top I used was Karlby. The desk feet are wider than the karlby top, but I solved this by fabricating some out of walnut to match the top. Measurements of the feet are in the assembly instructions should you choose a different top. 10/10 would buy again
- Reply(1)
- Inaccurate
- Jeffrey b on Jan 25, 2023
- Purchased on Feb 25, 2022
Thanks for your reply.
- Reply
- New User U on Jan 27, 2023
Vote for the best answer above!
can I use only two motors for or do i have to use all three?
A shopper
on Jun 14, 2023
BEST ANSWER: The controller works properly with only 2 of the motors connected, but it does have a gyro inside the controller to detect tilting, and will stop the legs to prevent the desk from falling over in the case of motor failure. I don't see why you would want to only use two of them though, because they sell models that only come with two legs.
- Reply
- Inaccurate
- Jake T on Jun 18, 2023
- Purchased on Nov 25, 2022
BEST ANSWER: The controller works properly with only 2 of the motors connected, but it does have a gyro inside the controller to detect tilting, and will stop the legs to prevent the desk from falling over in the case of motor failure. I don't see why you would want to only use two of them though, because they sell models that only come with two legs.
- Reply
- Inaccurate
- Jake T on Jun 18, 2023
- Purchased on Nov 25, 2022
Have to use all 3. Each leg has its own motor.
- Reply
- Inaccurate
- Jill P on Jun 15, 2023
- Purchased on Nov 19, 2022
Vote for the best answer above!
I am getting an error code of E20. The desk will move to a lower position just fine, but it will not move up. It seems it uses the auto lock feature as it is going up. After trying to move it up multiple times it then will produce an error code of E-60 and I have to do a reset. Super frustrating. Any help is appreciated?
Branden L
on Jan 20, 2024
BEST ANSWER: Thank you for your inquiry. Monoprice stands behind all their products and offer support for any product related question. For further assistance, please contact us via chat, email, or phone by accessing: www.monoprice.com/help?pn=contact. One of our representatives will be glad to assist you. Thank you!
- Reply
- Inaccurate
- Jake S Staff on Jan 22, 2024
BEST ANSWER: Thank you for your inquiry. Monoprice stands behind all their products and offer support for any product related question. For further assistance, please contact us via chat, email, or phone by accessing: www.monoprice.com/help?pn=contact. One of our representatives will be glad to assist you. Thank you!
- Reply
- Inaccurate
- Jake S Staff on Jan 22, 2024
Are you sure it is under the weight limit? Also, make sure your connections are tight.
- Reply
- Inaccurate
- Eric C on Jan 20, 2024
Vote for the best answer above!
Could it be used with 30" deep countertop?
A shopper
on Jan 8, 2019
BEST ANSWER: Hi, yes that would work well. Just make sure the counter top is not too heavy, this desk frame is rated for loads up to 265 lbs. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Jan 8, 2019
BEST ANSWER: Hi, yes that would work well. Just make sure the counter top is not too heavy, this desk frame is rated for loads up to 265 lbs. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Jan 8, 2019
Vote for the best answer above!
Reviews
4.7 / 5.0
103 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
78
19
3
2
1
Rated 5 out of 5
Quality construction/Customizable
After 30 days of use, the quality and construction appears excellent. I did major modifications to fit an existing desk. The sturdy construction allowed the changes to fit seamlessly into the exist desk design.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Triple?Motor Height?Adjustable Sit?Stand L?Shaped Corner Desk Frame
Have had the frame for several weeks now and it was very easy to assemble and attach my own desktop to. It works very well and I am very happy with it.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
3 years in, still going strong
I bought this in November 2021 and it's still working great.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Much better than i expected
I would recommend Its super stable and very smooth. Saved me a bunch vs the big names
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Stand-up-sit-down desk
The desk stand works well as expected.
The single post leg however differs from another electric desk I own in a small annoying way. The post on this desk is centered under the desk where my other desk the post is aligned with the edge of the desk making better use of the space under the desk that this version.
The single post leg however differs from another electric desk I own in a small annoying way. The post on this desk is centered under the desk where my other desk the post is aligned with the edge of the desk making better use of the space under the desk that this version.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Excellent quality at a great price
I was very pleased to see how this frame arrived at my office. It was packaged extremely well to protect all pieces. Assembly was extremely easy. I had a 1" thick desktop that I attached to the frame. I was very pleased to find how heavy duty and sturdy the desk was. I have a 34" widescreen monitor and laptop on the desk that is extremely stable, even at a standing height. The 4 memory settings are nice and lift operation is super-smooth and quiet. I searched a long time for a frame that would work with my current L-shaped top, and really glad I found this one. I would definitely recommend this one.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Great Value and Great for Tall Guys
I got this not expecting much but It's held up great. I'm 6'5' and it raises up higher than I need! Most standing desk top out and I still have to hunch down or spread my stance to be comfortable but not with this bad boy. There's not a lot of downside with being tall but short desks and small cars are two of them. 10/10 would recommend.
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Works well
Measurements provided online are incorrect. Had to come up with alternate install. Performs well. It is quiet and quick.
- Was this review helpful? Yes (1) No (2)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (2)
- Flag as Inappropriate
Rated 5 out of 5
Works great! Extremely sturdy and relatively easy to assemble.
Very sturdy and nicely designed. Easier to assemble with two people, but possible with one. Controls are very easy to operate and the motors are smooth and relatively quiet. I'm using 3 different positions in my daily work and it's been a real game changer so far.
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Perfect choice
I highly recommend this product. It holds up bulky table top and multiple monitors and rise them up and down with ease. Powerful and silent motors. Perfect choice for DIYers
Perfect desk frame for a bully table top. It?s for my daily office table and is a perfect choice
- Was this review helpful? Yes (8) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (8) No (0)
- Flag as Inappropriate