Monoprice High Quality Banana Binding Post Two-Piece Inset Wall Plate for 4 Speakers - Coupler Type
Product # 3326
UPC # 844660033264
$5.99
$9.99
Save $4.00 (40%)
*Affirm is not available for business or international orders
Qty: 1
$5.99
$9.99
Qty: 2-9
$5.99
$9.59
Qty: 10-19
$5.99
$9.39
Qty: 20-49
$5.99
$9.19
Qty: 50+
$5.99
$8.99
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 53 questions
Browse 53 questions
and 84 answers
Can 3 of these be used in a triple gang box? If so what face plate should be used?
A shopper
on Apr 24, 2018
BEST ANSWER: Sure. Use a triple gang Decora (or equivalent) faceplate, same as with 3 light switches (for example). The rear binding post cross-holes for bare wire insertion are horizontally oriented, however, so there is some fiddling required to introduce four twin conductor cables using bare ends. Would have been easier if the manufacturer had oriented the rear binding post cross-holes at 45 degrees to horizontal.
- Reply
- Inaccurate
- Andy W on Apr 24, 2018
- Purchased on Jun 12, 2017
BEST ANSWER: Sure. Use a triple gang Decora (or equivalent) faceplate, same as with 3 light switches (for example). The rear binding post cross-holes for bare wire insertion are horizontally oriented, however, so there is some fiddling required to introduce four twin conductor cables using bare ends. Would have been easier if the manufacturer had oriented the rear binding post cross-holes at 45 degrees to horizontal.
- Reply
- Inaccurate
- Andy W on Apr 24, 2018
- Purchased on Jun 12, 2017
Yes, these can be mounted in any electrical box, just like any switch or wall outlet (as long as it is deep enough to allow for the wiring). Standard faceplates for rectangular toggle switches fit fine. In my situation, I mounted mine in a triple gang plastic box (blue) I found at Menards. Actually found everything I needed at Menards. Hope this helped.
- Reply
- Inaccurate
- John on Apr 24, 2018
- Purchased on May 24, 2017
Three of them can definitely be used in a triple gang box. Make sure you use a deep box. A standard 3-gang decora style faceplate is all that is necessary. I recommend using a nylon plate vs. a plastic plate.
- Reply
- Inaccurate
- Paul C on Apr 24, 2018
- Purchased on Jul 2, 2017
Yes, just get a faceplate with three rectangular cutouts.
- Reply(1)
- Inaccurate
- Gabriel C on Apr 24, 2018
- Purchased on Jun 19, 2017
Vote for the best answer above!
Can banana plugs be connected on both front and back for a complete connection? That would be a total of 16 banana plugs for this wall plate.
A shopper
on Dec 25, 2016
BEST ANSWER: Yes. In fact, that's exactly how I wired mine. You could connect bare wire to either of the posts, on either side, but I found it a lot easier to put banana plugs on both sides. Made for quick and easy connection.
I used the Sewell Deadbolt Banana Plugs, and they were perfect for my needs. Quick, easy, secure connection.
I used the Sewell Deadbolt Banana Plugs, and they were perfect for my needs. Quick, easy, secure connection.
- Reply
- Inaccurate
- DLCPhoto on Dec 25, 2016
- Purchased on May 20, 2016
BEST ANSWER: Yes. In fact, that's exactly how I wired mine. You could connect bare wire to either of the posts, on either side, but I found it a lot easier to put banana plugs on both sides. Made for quick and easy connection.
I used the Sewell Deadbolt Banana Plugs, and they were perfect for my needs. Quick, easy, secure connection.
I used the Sewell Deadbolt Banana Plugs, and they were perfect for my needs. Quick, easy, secure connection.
- Reply
- Inaccurate
- DLCPhoto on Dec 25, 2016
- Purchased on May 20, 2016
Yes you can use plugs on both sides although it's not very deep - the plug tips will probably touch in the middle. I would not recommend this as the plugs are quite expensive and the screw-down connection is better than a plug.
- Reply
- Inaccurate
- Morgan on Feb 26, 2018
- Purchased on Feb 11, 2018
Yes, the back side can be hard wired or connection can be made with male banana plugs.
- Reply
- Inaccurate
- gordon H on Dec 25, 2016
- Purchased on May 6, 2016
Vote for the best answer above!
How does the bare wire attach to the connector? Are there set screws to hold the wire? Any illustrations?
JimP
on Oct 24, 2019
BEST ANSWER: Wire attaches the same way as a modern A/V receiver. Either Banana plugs or screwed down bare wire (There is a post with a hole in it for bare wire to pass through and then the outer ring is screwed down). Unfortunately, there is not enough depth to the plate to use Banana plugs on both sides, so at least one side of the plate will have to be connected with screwed down bare wire. I did this on the in-wall side and use banana plugs on the accessible side.
- Reply
- Inaccurate
- Austin D on Oct 24, 2019
- Purchased on Nov 19, 2018
BEST ANSWER: Wire attaches the same way as a modern A/V receiver. Either Banana plugs or screwed down bare wire (There is a post with a hole in it for bare wire to pass through and then the outer ring is screwed down). Unfortunately, there is not enough depth to the plate to use Banana plugs on both sides, so at least one side of the plate will have to be connected with screwed down bare wire. I did this on the in-wall side and use banana plugs on the accessible side.
- Reply
- Inaccurate
- Austin D on Oct 24, 2019
- Purchased on Nov 19, 2018
There called 5 way binding posts. One of the 5 ways is both the front and back of the posts have holes that will accept up to a 12 guage wire. There are screw caps on the posts that screw down to tighten the wire onto the back of the plate. As installers we use that method on the back of the plate and then use bananna jacks on the front
- Reply
- Inaccurate
- James M on Oct 24, 2019
- Purchased on Mar 16, 2017
On the back side of the plate there is a hole drilled through the threaded post at a 90* angle . You push your wire through this hole and screw down a nut to secure the wire.
- Reply
- Inaccurate
- Matt B on Oct 24, 2019
- Purchased on Oct 27, 2018
Vote for the best answer above!
Is there a female banana connector on each side?
So each speaker requires 3 cables? 1 going to the speaker, 1 to the amp, and 1 short one inside the wall?
I want to add speakers under eaves outside my patio, but keep the amp inside. Is there a better product to use?
So each speaker requires 3 cables? 1 going to the speaker, 1 to the amp, and 1 short one inside the wall?
I want to add speakers under eaves outside my patio, but keep the amp inside. Is there a better product to use?
Kelly M
on Aug 16, 2020
BEST ANSWER: The same Binding posts are on both sides of the plate. You need two cables. One from the speaker to the plate and one from plate to amp. Should work ok for your example application but rain may be a concern.
- Reply
- Inaccurate
- Robert K on Aug 17, 2020
- Purchased on Sep 10, 2019
BEST ANSWER: The same Binding posts are on both sides of the plate. You need two cables. One from the speaker to the plate and one from plate to amp. Should work ok for your example application but rain may be a concern.
- Reply
- Inaccurate
- Robert K on Aug 17, 2020
- Purchased on Sep 10, 2019
There is a female banana connector on each side of the cover plate for each L/R connection point. I cannot speak to the setup for an amplifier.
- Reply
- Inaccurate
- Valued C on Aug 17, 2020
- Purchased on Aug 27, 2019
Yes. I had to be careful to label the wires on both sides and the plate just incase I ever have to take it apart
- Reply
- Inaccurate
- scott a on Aug 16, 2020
- Purchased on Aug 18, 2019
Vote for the best answer above!
Can I remove the bottom two and replace with RCA connections?
A shopper
on Mar 10, 2021
BEST ANSWER: Yes, Monoprice's RCA keystones have the same hex nut mentioned in the other reply. You woukd just buy the RCA keystone, remove the post, and replace it on this.
- Reply
- Inaccurate
- New User U on Jan 16, 2023
BEST ANSWER: Yes, Monoprice's RCA keystones have the same hex nut mentioned in the other reply. You woukd just buy the RCA keystone, remove the post, and replace it on this.
- Reply
- Inaccurate
- New User U on Jan 16, 2023
Yes, but there is a hex nut holding it in place, so you would need a similar configuration for your RCA post to ensure it stays on the panel.
- Reply
- Inaccurate
- Chris C on Mar 15, 2021
- Purchased on Mar 18, 2020
Yes you can. I replaced two with COAX cable connectors.
- Reply
- Inaccurate
- Steve L on Mar 12, 2021
- Purchased on Apr 2, 2020
Vote for the best answer above!
I just bought a house and it has this exact panel connected to surround sound. Can you someone tell me what exactly plugs into these?
A shopper
on May 29, 2017
BEST ANSWER: These are pre wired speaker connections. U can connect home theater output to these and connect speakers to the other end of the terminal. U can buy banana plugs for this side. I usually make my own cable with banana plugs ok both side. One side going into reciever and one side going in this panel.
- Reply
- Inaccurate
- Lalit c on May 29, 2017
- Purchased on Jun 10, 2016
BEST ANSWER: These are pre wired speaker connections. U can connect home theater output to these and connect speakers to the other end of the terminal. U can buy banana plugs for this side. I usually make my own cable with banana plugs ok both side. One side going into reciever and one side going in this panel.
- Reply
- Inaccurate
- Lalit c on May 29, 2017
- Purchased on Jun 10, 2016
You can plug in banana plugs but it looks equally neat with the bare wires inserted. Unscrew the knob until you can see the cross-hole where the wire goes. Insert the wire and tighten it down.
- Reply
- Inaccurate
- Morgan on Feb 26, 2018
- Purchased on Feb 11, 2018
Vote for the best answer above!
I need to connect 4 speakers, 2 in the kitchen & 2 in the dining room. Currently, only the dining room speakers are being used because my A/V receiver is only 2 zone, with the main 5.1 in the living room. Would you recommend installing 2 of these or one of the similar product for 4 speakers?
Marshall F
on Jan 30, 2020
Monoprice High Quality Banana Binding Post Two-Piece Inset Wall Plate for 4 Speakers - Coupler Type
Monoprice High Quality Banana Binding Post Two-Piece Inset Wall Plate for 2 Speakers - Coupler Type
Monoprice High Quality Banana Binding Post Two-Piece Inset Wall Plate for 5 Speakers - Coupler Type
Monoprice High Quality Banana Binding Post Wall Plate for 4 Speaker - Coupler Type
Monoprice High Quality Banana Binding Post Wall Plate for 5 Speaker - Coupler Type
BEST ANSWER: Thank you for your question.
Either would be suitable so this would be something that is completely up to your personal tastes.
Either would be suitable so this would be something that is completely up to your personal tastes.
- Reply
- Inaccurate
- Tyler C Staff on Jan 30, 2020
BEST ANSWER: Thank you for your question.
Either would be suitable so this would be something that is completely up to your personal tastes.
Either would be suitable so this would be something that is completely up to your personal tastes.
- Reply
- Inaccurate
- Tyler C Staff on Jan 30, 2020
Vote for the best answer above!
Can the connectors be removed from the plate? I'm looking for a plate in brown/bronze, but I can't find one so was considering getting this plate and painting it.
Shane S
on Jun 3, 2020
What is the biggest wire that will fit in it?
A shopper
on Jul 20, 2020
How do I wire receiver out to speaker out?
A shopper
on Aug 16, 2020
Are these gold plated copper or aluminum or something else?
DCESpeedy
on Sep 23, 2021
Questions For Similar Products
Reviews
4.7 / 5.0
569 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
452
76
21
13
7
Rated 5 out of 5
Great Piece
Seems to be high quality. Fit and installed well. Easy to use.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 2 out of 5
Doesn't fit in Decora plate
Bought this almost 2 years ago as I was building my home. Just got around to installing today, and I'm extremely annoyed to find that it doesn't fit in a standard Decora wall plate. The 1-gang plate it comes with fits, but it's too big for the 4-gang plate that I have (that the other 3 Monoprice keystone faces do fit into). Makes no sense, all the items were purchased from Monoprice.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
January 16, 2023
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
DIY but looks pro.
Made my atmos and zone 2 install look super clean. DIY saved me about $250.
Installed to support 4x atmos speakers. Looks clean and professional
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Gold product great price
The product was as described. I couldn?t find these near me and the shipping was fast. Thanks Monoprice. I will continue ordering from you!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Always quick and complete a pleasure to work with . I?ll be back thanks
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
4 Speaker Wall plate
Good metal. Good Plastic. Good Workmanship.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 2 out of 5
Issues with fit
This comes with a 1-gang wall plate, but I needed to use this in a 2-gang box. I figured this would be no problem -- I ordered a two-gang wall plate with space for two insets from Monoprice. The two did not fit together. The speaker inset was just a tiny bit too large to fit into the hole in the wall plate. I had to file down the edges with a diamond file to make it fit.
Once I did that, I got everything hooked up to it and then discovered that I couldn't make the assembled bit fit into the standard Carlon 2-gang box in the wall. Once I got the top screws in place, the banana posts caught on the lower edge of the box and prevented me from seating it the rest of the way.
I finally gave up on this product and switched to keystones instead.
Once I did that, I got everything hooked up to it and then discovered that I couldn't make the assembled bit fit into the standard Carlon 2-gang box in the wall. Once I got the top screws in place, the banana posts caught on the lower edge of the box and prevented me from seating it the rest of the way.
I finally gave up on this product and switched to keystones instead.
- Was this review helpful? Yes (3) No (2)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (2)
- Flag as Inappropriate
Rated 5 out of 5
Good quality binding post plate
Just what I needed to upgrade a Decora-style plate to add connections for additional speakers recently installed. Fits the standard Decora plate that was already installed. The binding posts are good quality, work well with bare wire and banana plugs.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Makes your life easy.
Made my life easy in setting up house sound system.
Great product! Would recommend.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Solid product
I'm always pleased when I get stuff from Monoprice. This speaker wire binding post is solid. I like the fact you can use "banana" plugs or you can thread the wire like a needle and secure the wire that way or you can just wrap the wire around the post and tighten it in that manner. I used banana plugs and when inferring then on the terminal, the connection was secured and not wobbly at all.. You would need a bit of force to take off the banana plug off the terminal.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products