Monoprice High Quality Banana Binding Post Two-Piece Inset Wall Plate for 2 Speakers - Coupler Type
Product # 3325
UPC # 844660033257
$6.99
*Affirm is not available for business or international orders
Qty: 1
$6.99
Qty: 2-9
$6.85
Qty: 10-19
$6.71
Qty: 20-49
$6.58
Qty: 50+
$6.45
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 52 questions
Browse 52 questions
and 77 answers
How does the bare wire attach to the connector? Are there set screws to hold the wire? Any illustrations?
A shopper
on Oct 24, 2019
BEST ANSWER: Each connector has an interior part I will refer to as the "barrel", and a pair of "collars" that thread on to the barrel at each end (in the front of the connector and the back of it). There's also a nut that threads on to the barrel in the back to hold it to the faceplate. The bare wire is passed through a hole drilled into the barrel on the rear side of the connector, and is held in place by the rear collar. No set screws or solderable terminals are in evidence. There are slots cut into the collars that permit a large flat blade screwdriver to be used to turn the collars, which I think is better that using pliers.
- Reply
- Inaccurate
- David E on Oct 24, 2019
- Purchased on Nov 28, 2018
BEST ANSWER: Each connector has an interior part I will refer to as the "barrel", and a pair of "collars" that thread on to the barrel at each end (in the front of the connector and the back of it). There's also a nut that threads on to the barrel in the back to hold it to the faceplate. The bare wire is passed through a hole drilled into the barrel on the rear side of the connector, and is held in place by the rear collar. No set screws or solderable terminals are in evidence. There are slots cut into the collars that permit a large flat blade screwdriver to be used to turn the collars, which I think is better that using pliers.
- Reply
- Inaccurate
- David E on Oct 24, 2019
- Purchased on Nov 28, 2018
The rear wire is attached to the Binding Post by inserting the wire through a hole across the rear of the Binding Post then tightening a nut on the rear the Binding Post to secure the wire. It is convenient and secure and requires no soldering. I cannot send a picture since it is installed in a house located 11 hours away. It would be useful if Monoprice had a pic of the rear of the post.
- Reply
- Inaccurate
- Tom in Colorado on Oct 24, 2019
- Purchased on Nov 18, 2018
Two methods of attaching the wire: 1) unscrew the outer sheathing of the banana (female) plugs and attach wire by placing it in a hole under the sheathing and screw the sheathing down to tighten or 2) attach banana (male) plugs to the speaker wires on both sides and plug in to the female plugs of the wall plate.
- Reply
- Inaccurate
- Paul C on Oct 24, 2019
- Purchased on Nov 14, 2018
You can use banana plugs or use as standard binding post.
- Reply
- Inaccurate
- Michael Trecaso I on Oct 24, 2019
- Purchased on Oct 25, 2018
Vote for the best answer above!
Is it possible to use these directly on the speaker?
A shopper
on May 14, 2020
BEST ANSWER: You probably could, though the backside isnt made for bare wire, compared to some other products that would be better suited.
- Reply
- Inaccurate
- Samuel N on May 14, 2020
- Purchased on May 17, 2019
BEST ANSWER: You probably could, though the backside isnt made for bare wire, compared to some other products that would be better suited.
- Reply
- Inaccurate
- Samuel N on May 14, 2020
- Purchased on May 17, 2019
would say yes if you are building your speakers or you would have to remove your current speaker terminal s
- Reply
- Inaccurate
- Terry D on May 14, 2020
- Purchased on Jun 9, 2019
Anything is possible when you put your mind to it.
- Reply
- Inaccurate
- Kenneth D on May 14, 2020
- Purchased on Jul 12, 2019
Vote for the best answer above!
i need in black color do you have for two and trhee speaker?
ANA LUISA L
on Mar 22, 2017
BEST ANSWER: Thank you for your question. Unfortunately we would not offer these wall plates in black.
- Reply
- Inaccurate
- Mark P Staff on Apr 28, 2017
BEST ANSWER: Thank you for your question. Unfortunately we would not offer these wall plates in black.
- Reply
- Inaccurate
- Mark P Staff on Apr 28, 2017
Vote for the best answer above!
1. Can it accommodate 12 gauge bare wire. 2. Are the color rings painted on?
William C
on Aug 16, 2017
BEST ANSWER: 12ga works well in it. Color rings seem to be paint... could be epoxy. Very durable. Have not run into any issues with the color coming off or wearing.
- Reply
- Inaccurate
- Rob H on Sep 11, 2017
- Purchased on Dec 23, 2016
BEST ANSWER: 12ga works well in it. Color rings seem to be paint... could be epoxy. Very durable. Have not run into any issues with the color coming off or wearing.
- Reply
- Inaccurate
- Rob H on Sep 11, 2017
- Purchased on Dec 23, 2016
Vote for the best answer above!
Do you guys offer these for a single speaker. I have already run conduit throughout the room to run the wires but the speakers will be on opposite sides from each other. What do you recommend? Room will be sound proffed
Hasib k
on Jun 2, 2019
BEST ANSWER: Thank you for your question.
Yes, you would want to use #3639 and #3324.
Yes, you would want to use #3639 and #3324.
- Reply
- Inaccurate
- Tyler C Staff on Jun 5, 2019
Monoprice High Quality Banana Binding Post Two-Piece Inset Wall Plate for 1 Speaker - Coupler Type
Monoprice High Quality Banana Binding Post Wall Plate for 1 Speaker - Coupler Type
BEST ANSWER: Thank you for your question.
Yes, you would want to use #3639 and #3324.
Yes, you would want to use #3639 and #3324.
- Reply
- Inaccurate
- Tyler C Staff on Jun 5, 2019
Monoprice High Quality Banana Binding Post Two-Piece Inset Wall Plate for 1 Speaker - Coupler Type
Monoprice High Quality Banana Binding Post Wall Plate for 1 Speaker - Coupler Type
Vote for the best answer above!
I need to connect 4 speakers, 2 in the kitchen & 2 in the dining room. Currently, only the dining room speakers are being used because my A/V receiver is only 2 zone, with the main 5.1 in the living room. Would you recommend installing 2 of these or one of the similar product for 4 speakers?
Marshall F
on Jan 30, 2020
Monoprice High Quality Banana Binding Post Two-Piece Inset Wall Plate for 2 Speakers - Coupler Type
Monoprice High Quality Banana Binding Post Two-Piece Inset Wall Plate for 4 Speakers - Coupler Type
Monoprice High Quality Banana Binding Post Two-Piece Inset Wall Plate for 5 Speakers - Coupler Type
Monoprice High Quality Banana Binding Post Wall Plate for 4 Speaker - Coupler Type
Monoprice High Quality Banana Binding Post Wall Plate for 5 Speaker - Coupler Type
BEST ANSWER: Thank you for your question.
Either would be suitable so this would be something that is completely up to your personal tastes.
Either would be suitable so this would be something that is completely up to your personal tastes.
- Reply
- Inaccurate
- Tyler C Staff on Jan 30, 2020
BEST ANSWER: Thank you for your question.
Either would be suitable so this would be something that is completely up to your personal tastes.
Either would be suitable so this would be something that is completely up to your personal tastes.
- Reply
- Inaccurate
- Tyler C Staff on Jan 30, 2020
Vote for the best answer above!
I want to use these in a 2 gang setup. What brand of wall plates work? I tried the Leviton 2 gang plate and the inserts are a tad bigger.
New User U
on Feb 9, 2020
BEST ANSWER: Thank you for your question.
We cannot guarantee this would fit inside of a wall plate that is different than the one that is shipped with it.
We cannot guarantee this would fit inside of a wall plate that is different than the one that is shipped with it.
- Reply
- Inaccurate
- Tyler C Staff on Feb 10, 2020
BEST ANSWER: Thank you for your question.
We cannot guarantee this would fit inside of a wall plate that is different than the one that is shipped with it.
We cannot guarantee this would fit inside of a wall plate that is different than the one that is shipped with it.
- Reply
- Inaccurate
- Tyler C Staff on Feb 10, 2020
Vote for the best answer above!
Hi, before I order a Monoprice High Quality Banana Binding Post Two-Piece Inset Wall Plate for 2 Speakers - Coupler Type Product # 3325. What type of plugs do i need to order for this wall plate to install 2 speakers?please help me....Greg
A shopper
on Oct 18, 2018
Will these fit in an outdoor electrical box? Looking to install something outside on my deck to hookup stereo speakers from stereo inside my house.
A shopper
on Apr 9, 2020
Does this screw into standard sized single gang box? Do i need low voltage gang instead?
A shopper
on Aug 26, 2020
Questions For Similar Products
Reviews
4.7 / 5.0
569 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
452
76
21
13
7
Rated 5 out of 5
Binding Post for Speakers
Great price, looks nice, and works as advertised
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
great quality and price
These are very well made and at this price you can't go wrong.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 3 out of 5
Alignment slightly off
The wall plate screw hole alignment is slightly off making it difficult but not impossible to secure the wall plate. The connector build is fine but the plastic feels like it could snap at any moment, although it never did. Good instructions included.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Quality hardware. Exactly what was needed. I'm surprised I could not find these in retail stores. Oh well, with Monoprice, who needs stores?
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Perfect fit.
This Banana binding post is perfect for home theater enthusiasts, when installing a home theater system. When you don?t want the site of wires running from one end of the room to the other, when you can hide then in the wall.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 3 out of 5
Good but not great
Decent quality for the price. Wall plate is not flush with the wall because of the screw holding the terminal is too big/long.
Wall plate not flush
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Excellent product. Worked well, easy installation and exceptional pricing.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Good Quality
Worked very well for adding rear surround speakers and running cable out of sight.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Great looking and good product.
Easy to install. Great value.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products