Monoprice Cat6A RJ45 Toolless 180-Degree Keystone Jack for 22-24AWG Solid Wire, Blue
Product # 15666
UPC # 889028037713
$1.99
*Affirm is not available for business or international orders
Qty: 1
$1.99
Qty: 2-9
$1.89
Qty: 10-19
$1.79
Qty: 20-49
$1.69
Qty: 50+
$1.59
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 35 questions
Browse 35 questions
and 42 answers
Are these for solid or stranded cable?
A shopper
on Aug 9, 2017
Monoprice Cat6A RJ45 Toolless 180-Degree Keystone Jack for 22-24AWG Solid Wire, Blue
Monoprice Cat6A RJ45 Toolless 180-Degree Keystone Jack for 22-24AWG Solid Wire, White
BEST ANSWER: I would say SOLID only. Not sure stranded would provide a good connection. But I could be mistaken.
- Reply
- Inaccurate
- Stan N on Nov 3, 2017
- Purchased on Oct 24, 2017
BEST ANSWER: I would say SOLID only. Not sure stranded would provide a good connection. But I could be mistaken.
- Reply
- Inaccurate
- Stan N on Nov 3, 2017
- Purchased on Oct 24, 2017
I tested these keystone jacks with Cat6A 28AWG UTP Ultra-Thin Bulk Cable, Stranded, CMR/FT4 cable and they worked fine. I had to be careful when lining up the cable into the termination slots to ensure the cable is properly crimped when you put the cable holder in place. I used a cable tester to test each connection, and this was essential as some of the crimps did not work on the first try, but were easily corrected.
- Reply
- Inaccurate
- James C on Nov 14, 2017
- Purchased on Oct 25, 2017
Vote for the best answer above!
Do these work with the Slimrun Cat6 cable from Monoprice?
A shopper
on Sep 14, 2017
BEST ANSWER: Yes, they work with slim run cable. As mentioned in another post, the slim cable doesn't fit snugly at the entrance to the jack as it is made for traditional "fat" cat5/6 cable. I don;t think this will be a problem unless you "pull" the cable a lot after it is terminated in the jack as the slim run cable will loosen fairly easily if pulled. I recommend to test each connection using a cable tester as these jacks are a bit finicky to properly seat the cable in the punch down slots.
- Reply
- Inaccurate
- James C on Nov 14, 2017
- Purchased on Oct 25, 2017
BEST ANSWER: Yes, they work with slim run cable. As mentioned in another post, the slim cable doesn't fit snugly at the entrance to the jack as it is made for traditional "fat" cat5/6 cable. I don;t think this will be a problem unless you "pull" the cable a lot after it is terminated in the jack as the slim run cable will loosen fairly easily if pulled. I recommend to test each connection using a cable tester as these jacks are a bit finicky to properly seat the cable in the punch down slots.
- Reply
- Inaccurate
- James C on Nov 14, 2017
- Purchased on Oct 25, 2017
We didn't use them with slim run, but one spool of the cable we got was smaller diameter than the other two and they didn't seem to fit as snugly where the cable enters the back of the keystone. YMMV and this may not be something that matters to you.
- Reply
- Inaccurate
- Douglas N on Sep 14, 2017
- Purchased on Feb 15, 2017
Vote for the best answer above!
These jacks capable of going 10G?
A shopper
on Feb 2, 2018
BEST ANSWER: 6A is a 10 gig spec, but these toys aren't quality controlled to actually pass 6A. Not close. Way too much crosstalk..
- Reply
- Inaccurate
- New User U on Mar 22, 2018
BEST ANSWER: 6A is a 10 gig spec, but these toys aren't quality controlled to actually pass 6A. Not close. Way too much crosstalk..
- Reply
- Inaccurate
- New User U on Mar 22, 2018
Yes CAT 6A supports 10 gigabit ethernet
- Reply
- Inaccurate
- Edward M on Feb 2, 2018
- Purchased on Oct 30, 2017
Vote for the best answer above!
Will these work on 13071. 23 AWG wire?
New User U
on Feb 15, 2020
Monoprice Cat6A RJ45 Toolless 180-Degree Keystone Jack for 22-24AWG Solid Wire, Blue
Monoprice 1000ft Cat6A Ethernet Cable, UTP, 23AWG, 10G, Pure Copper, CMR‑Rated, Blue, Bulk Spool
BEST ANSWER: I'm currently using with Monoprice 23AWG CAT6A cable (Product ID 30661) and they seem to work fine. I really think that (assuming the keystone is wired correctly) as long as the keystone is locked down into "finished" position correctly, you will not experience any issues.
- Reply
- Inaccurate
- Daniel R on Aug 7, 2020
- Purchased on Jul 8, 2020
BEST ANSWER: I'm currently using with Monoprice 23AWG CAT6A cable (Product ID 30661) and they seem to work fine. I really think that (assuming the keystone is wired correctly) as long as the keystone is locked down into "finished" position correctly, you will not experience any issues.
- Reply
- Inaccurate
- Daniel R on Aug 7, 2020
- Purchased on Jul 8, 2020
I have used a lot of these, probably between 70-80. They are great to work with. However, I believe the 23 GA wire might be too thin for them. I would be concerned they would not make good contact. That's my opinion but I think I'm right.
- Reply
- Inaccurate
- Alexander L on Feb 15, 2020
- Purchased on Jun 20, 2019
Vote for the best answer above!
Are these toolless keystones shielded?
A shopper
on Feb 22, 2021
BEST ANSWER: These keystones are not shielded; they are "normal" keystones.
- Reply
- Inaccurate
- Daniel R on Feb 22, 2021
- Purchased on Jul 8, 2020
BEST ANSWER: These keystones are not shielded; they are "normal" keystones.
- Reply
- Inaccurate
- Daniel R on Feb 22, 2021
- Purchased on Jul 8, 2020
Vote for the best answer above!
Will these keystones work with your wall plates such as this one? https://www.monoprice.com/product?c_id=105&cp_id=10517&cs_id=1051703&p_id=6835&seq=1&format=2 Or even a 4 keystone plate?
New User U
on Jan 31, 2017
BEST ANSWER: Thank you for your question. Yes, this keystone jack will work just fine in our keystone wall plates.
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
https://www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
https://www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
- Reply
- Inaccurate
- Mark P Staff on May 9, 2017
BEST ANSWER: Thank you for your question. Yes, this keystone jack will work just fine in our keystone wall plates.
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
https://www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
https://www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
- Reply
- Inaccurate
- Mark P Staff on May 9, 2017
Vote for the best answer above!
How do you terminate the cables on this, is it spring loaded terminals of some sort, or is there a cap that pushes the cables down into the slots like a punchdown tool would normally do, or something else? Is it the same as your tool-less RJ-45 Keystone Jacks #15666 here https://www.monoprice.com/product?p_id=15666 ? The pics on both products are not sufficient to give an idea of how the cabling is terminated without a punch down tool.
A shopper
on Jul 18, 2017
Monoprice Cat6A RJ45 Toolless 180-Degree Keystone Jack for 22-24AWG Solid Wire, Blue
Monoprice Entegrade Series Cat6A Unshielded 19in 1U Toolless Patch Panel, 24-port
BEST ANSWER: The back of the keystone where the cable enters opens up like a clam. Inside there is a white cap that is removable (so the unit is 2 peices). The white cap acts as a punch down when it is put in place and the blue exterior clam secures the punch down in place.
- Reply(1)
- Inaccurate
- Kevin O on Jul 18, 2017
Thank you for this! I've been looking at this and the keystone jacks to wire my house up (already have 1000' spool of Cat 6a ready to go and a 48port gigabit PoE+ switch) and was concerned about whether these would work for my use case. I'm a bit more confident in purchasing them now.
- Reply
- New User U on Jul 18, 2017
BEST ANSWER: The back of the keystone where the cable enters opens up like a clam. Inside there is a white cap that is removable (so the unit is 2 peices). The white cap acts as a punch down when it is put in place and the blue exterior clam secures the punch down in place.
- Reply(1)
- Inaccurate
- Kevin O on Jul 18, 2017
Thank you for this! I've been looking at this and the keystone jacks to wire my house up (already have 1000' spool of Cat 6a ready to go and a 48port gigabit PoE+ switch) and was concerned about whether these would work for my use case. I'm a bit more confident in purchasing them now.
- Reply
- New User U on Jul 18, 2017
Vote for the best answer above!
I am confused by the description. It states it can terminate Cat5e, Cat6, and Cat6a but then goes on to say it is available in Cat6 or Cat6a. Can I use the Monoprice Cat6A RJ-45 Toolless 180-Degree Keystone with Cat6 cable?
New User U
on Feb 28, 2020
BEST ANSWER: Thank you for your question.
You can, I would just keep in mind that you would be limited to Cat 6 speeds.
You can, I would just keep in mind that you would be limited to Cat 6 speeds.
- Reply
- Inaccurate
- Tyler C Staff on Feb 28, 2020
BEST ANSWER: Thank you for your question.
You can, I would just keep in mind that you would be limited to Cat 6 speeds.
You can, I would just keep in mind that you would be limited to Cat 6 speeds.
- Reply
- Inaccurate
- Tyler C Staff on Feb 28, 2020
Vote for the best answer above!
Will the Cat6A RJ-45 Toolless 180-Degree Keystone (red 15665 or blue 15666) fit side-by-side in the Décor Insert for Keystone, 6 Hole (34518)? This would be a reason for me to choose over the Monoprice Cat6 Punch Down Keystone Jack (red 5383 or blue 5379 - these have a specific note in their description indicating they will not fit side-by-side). Another user was able to install Leviton QuickPort Extreme CAT 6 Connectors (example 61110-RL6 from the orange DIY big box store), side-by-side in a 6-hole Décor Insert. Thank you.
Jonathan D
on Oct 7, 2020
Monoprice Cat6A RJ45 Toolless 180-Degree Keystone Jack for 22-24AWG Solid Wire, Blue
Monoprice Cat6 Punch Down Keystone Jack for 22-24AWG Solid Wire, Blue
Monoprice Cat6 Punch Down Keystone Jack for 22-24AWG Solid Wire, Red
Monoprice Cat6A RJ-45 Toolless 180-Degree Keystone, Red
Monoprice Decor Insert for Keystone, 6-Port, White, 4"x1.4"x0.25", w/Screws
BEST ANSWER: Thank you for your question.
Only the keystones like #15666 or #15665 will fit into the insert you listed.
The others will block one another if you try to install them.
Only the keystones like #15666 or #15665 will fit into the insert you listed.
The others will block one another if you try to install them.
- Reply
- Inaccurate
- Tyler C Staff on Oct 8, 2020
BEST ANSWER: Thank you for your question.
Only the keystones like #15666 or #15665 will fit into the insert you listed.
The others will block one another if you try to install them.
Only the keystones like #15666 or #15665 will fit into the insert you listed.
The others will block one another if you try to install them.
- Reply
- Inaccurate
- Tyler C Staff on Oct 8, 2020
Vote for the best answer above!
Do these work well with the Monoprice 24port keystone patch panel?
New User U
on Nov 4, 2022
Monoprice Cat6A RJ45 Toolless 180-Degree Keystone Jack for 22-24AWG Solid Wire, Blue
Monoprice 24-port Keystone Jack Panel
BEST ANSWER: I cannot be absolutely certain, but it has been my experience that most managed and un-managed internet routers (and switches) can handle the throughput speeds that the actual cables and interconnects (like these items) will provide.
- Reply
- Inaccurate
- Daniel on Nov 4, 2022
- Purchased on Jan 30, 2022
BEST ANSWER: I cannot be absolutely certain, but it has been my experience that most managed and un-managed internet routers (and switches) can handle the throughput speeds that the actual cables and interconnects (like these items) will provide.
- Reply
- Inaccurate
- Daniel on Nov 4, 2022
- Purchased on Jan 30, 2022
Vote for the best answer above!
Is there a datasheet for these? How good are these are mitigating alien cross-talk? Do they conform to the RFC for 10G ethernet? Has anyone here tested these with Fluke DTX-1800 or better testers with the Cat 6A heads?
A shopper
on Aug 15, 2018
Will these keystones work with this patch panel?
https://www.monoprice.com/product?c_id=303&cp_id=30309&cs_id=3030901&p_id=39752&seq=1&format=2
https://www.monoprice.com/product?c_id=303&cp_id=30309&cs_id=3030901&p_id=39752&seq=1&format=2
A shopper
on Feb 15, 2021
Does this plate work with these keystones? Also, are there specifications for the size of the plate, as well as location of screws?
A shopper
on Feb 24, 2021
Monoprice Cat6A RJ45 Toolless 180-Degree Keystone Jack for 22-24AWG Solid Wire, Blue
Monoprice Cat6A RJ-45 Toolless 180-Degree Keystone, Red
Monoprice 1-Gang Wall Plate for Keystone, 2-Port, White, 4.5"x2.75"x0.2", w/Screws (White Coated Screw Head)
Do you have a 180 Degree crimping tool for these? For example, Can I use a Category 6A 180 Degree Cut & Crimp Tool for Keystone Compatible Inserts from Liberty AV Solutions? (Couldn't put the link, part number: EHT010)
Rob H
on Apr 13, 2021
Questions For Similar Products
Reviews
4.3 / 5.0
45 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
32
4
2
3
4
Rated 4 out of 5
Quality Control
I bought two of these, one went into the face plate very easily and the other one I had to press in with my full body weight using a screwdriver.
I was very satisfied with the installation otherwise and the connection is good!
I was very satisfied with the installation otherwise and the connection is good!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Blue cat6 keystone insert
Have not installed yet, looks like they will work...
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Response from Monoprice
Thank you for taking the time to review your product. We hope it continues to meet your expectations. Thank you for shopping with us!
July 24, 2023
Eli S
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Better than the metal keystones
I tried the metal ones and they were significantly worse than these and had to be replaced after a few months.
2 years after installation, no issues. Except being too lazy to patch the sheetrock.
- Was this review helpful? Yes (1) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (1)
- Flag as Inappropriate
Rated 5 out of 5
A good purchase
Easy to install and works.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
great easy to use product
great product easy to install. worked perfectly.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 2 out of 5
Easy to use, but has quality control issues
I installed eight of these yesterday. Of those eight, one was missing the retaining clip from the packaging, and one lacked continuity on pin #5. A 25% failure rate is pretty bad for any product, so make sure you order surplus to account for spoilageand if you have the means, maybe make a testing rig to test them before installation.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Easy Tool-less Connector/Keystone.
This is now my keystone of choice! It is very different from the keystone I was using previously, so the first one was a bit of a hassle until I realized I was just being stupid in my approach to attaching the wires. :) The rest were wired easily and, if done properly, the CAT cable is quite secure. Nice design!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 1 out of 5
Worthless
We ordered about 100 of these and had to redo half of the drops. Maybe we got a bad batch, but I will never buy them again. Wire 8 had a lot off issues connecting for some reason. Stick with the punch down ones.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products