Monoprice Wall Mount Bracket, 7in x 19in x 12in, 4U, Max 40 lbs.
Product # 8627
UPC # 844660086277
$14.99
$25.99
Save $11.00 (42%)
*Affirm is not available for business or international orders
- Eligible for Coupon(s) EXTRA30
Qty: 1
$14.99
$25.99
Qty: 2-9
$14.99
$25.08
Qty: 10-19
$14.99
$24.82
Qty: 20-49
$14.99
$24.56
Qty: 50+
$14.99
$24.30
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 22 questions
Browse 22 questions
and 64 answers
Is it possible to mount this rack safely when your studs are 24" on center and the area in which I need to mount it I won't be able to hit any studs.? I only plan to have a patch panel, 16 port switch and power supply in the rack.
Travis K
on Aug 10, 2019
BEST ANSWER: Thank you for your question.
This would only work for studs with 16" of space between them.
This would only work for studs with 16" of space between them.
- Reply
- Inaccurate
- Tyler C Staff on Aug 12, 2019
BEST ANSWER: Thank you for your question.
This would only work for studs with 16" of space between them.
This would only work for studs with 16" of space between them.
- Reply
- Inaccurate
- Tyler C Staff on Aug 12, 2019
While the answer of using a small board to span the distance will work, a common solution in the industry - even if studs are on 16" centers - is to attach a larger 3/4" plywood board to the wall and mount to it. This will give more stability than using a board that is only as tall as the rack and only as wide as the single set of studs, and it can be used to mount other devices nearby, giving greater stability for all of them. Some service providers want their equipment to be mounted to a 4'x8'x3/4" sheet of fire-retardant plywood, and fire inspectors want to see the stamp on the plywood that it's fire-retardant, so if you paint the panel, don't paint over that. (MP rules don't let me link to the guidelines.)
My space is not 4ft wide, so I'll have to rip the board to the available width. It will seem as if that wall is just a solid wood wall, which will work fine for me.
My space is not 4ft wide, so I'll have to rip the board to the available width. It will seem as if that wall is just a solid wood wall, which will work fine for me.
- Reply
- Inaccurate
- Michael P on Nov 27, 2020
Definitely not. I tried mounting it with one side on a stud and the other side on 2x 50# wallboard anchors. The rack is too deep — the leverage torques the anchors right out of the wall. However, mounting it to a concrete block wall with proper concrete anchors has worked very well with network gear, so some weight, but I'm well under 1/2 of the combined weight rating of the anchors.
- Reply
- Inaccurate
- Alexander F on May 16, 2023
- Purchased on Nov 10, 2022
I realize your question was asked a year ago; however, I thought I would add an answer in case someone else had the same question. If your studs are too far apart you could attach two pieces of 1x lumber to the wall spanning the distance between the dtuds and then mount the rack to that.
- Reply
- Inaccurate
- Robert C on May 21, 2020
Vote for the best answer above!
Is it possible to stack 2 of the 4U mount to make it an 8U?
New User U
on May 15, 2023
BEST ANSWER: It would stack pretty tight, but I wouldn't count on it aligning well enough if you have something that's going to be screwed into both racks — the machining tolerance just isn't that tight. It would visually appear as one 8U rack if have two 4U sets of gear though. Or, if you have a component that's 3U or more, leave 1U or so worth of space in the middle: mount one to the wall, then use the gear to help you align the second one and mark your drill holes, remove gear to drill and mount the second, then reattach gear.
- Reply
- Inaccurate
- Alexander F on May 16, 2023
- Purchased on Nov 10, 2022
BEST ANSWER: It would stack pretty tight, but I wouldn't count on it aligning well enough if you have something that's going to be screwed into both racks — the machining tolerance just isn't that tight. It would visually appear as one 8U rack if have two 4U sets of gear though. Or, if you have a component that's 3U or more, leave 1U or so worth of space in the middle: mount one to the wall, then use the gear to help you align the second one and mark your drill holes, remove gear to drill and mount the second, then reattach gear.
- Reply
- Inaccurate
- Alexander F on May 16, 2023
- Purchased on Nov 10, 2022
They have no provision for nesting or stacking, but if mounted precisely should work fine. If a device was connected to both upper and lower mounts, it should be possible to align them for a nice appearance.
- Reply
- Inaccurate
- Thomas S on May 16, 2023
- Purchased on Nov 29, 2022
Yes it is, however I would recommend getting a different rack for those dimensions.
- Reply
- Inaccurate
- Dhruv V on May 15, 2023
- Purchased on Feb 12, 2023
If there was enough room vertically, you could double stack these
- Reply
- Inaccurate
- Andy P on May 16, 2023
- Purchased on Nov 21, 2022
Vote for the best answer above!
What type of screws does it take?
Sebastien L
on May 14, 2020
BEST ANSWER: Standard 10-32 rack screws.
- Reply
- Inaccurate
- Daniel W on May 14, 2020
- Purchased on Apr 20, 2020
Monoprice 10/32 19mm Screw for Rack, 50 pcs, Carbon Steel, Black
BEST ANSWER: Standard 10-32 rack screws.
- Reply
- Inaccurate
- Daniel W on May 14, 2020
- Purchased on Apr 20, 2020
Monoprice 10/32 19mm Screw for Rack, 50 pcs, Carbon Steel, Black
The screws to mount on the wall could be anything. Just be sure to screw into wall studs or use a properly rated wall anchor. The component screws should match your equipment. In my case the equipment used M6 screws.
- Reply
- Inaccurate
- Paul L on May 14, 2020
- Purchased on Aug 7, 2019
Rack screws are standard, usually rack mount equipment comes with screws. But this rack comes with a bag of screws in a nice glossy black finish, so I just use those.
- Reply
- Inaccurate
- Jay C on May 14, 2020
- Purchased on Apr 20, 2020
Vote for the best answer above!
What's the depth?
A shopper
on Jul 25, 2020
BEST ANSWER: It’s 12 inches deep perfect for most rack network components. I have a power bar, patch panel & switch mounted in mine with no issues. There is room for one more rack component for future needs.
- Reply
- Inaccurate
- Thomas S on Jul 25, 2020
- Purchased on Apr 29, 2020
BEST ANSWER: It’s 12 inches deep perfect for most rack network components. I have a power bar, patch panel & switch mounted in mine with no issues. There is room for one more rack component for future needs.
- Reply
- Inaccurate
- Thomas S on Jul 25, 2020
- Purchased on Apr 29, 2020
7 inchs high (4 RU). Typical 19 inch across (standard rack width), and 12 inches deep.
If ordering a shelf, ensure you use correct depth.
If ordering a shelf, ensure you use correct depth.
- Reply
- Inaccurate
- jeff h on Jul 25, 2020
- Purchased on Jan 21, 2020
Nevermind I just realized it was in the order options! 12"! lol
- Reply
- Inaccurate
- Thure F on Jul 25, 2020
Vote for the best answer above!
What size are the screws? I lost mine and tried some rack screws which didn't fit.
A shopper
on Apr 21, 2020
BEST ANSWER: "This bracket is tapped for 10/32 screws and includes 24 such screws"
- Reply
- Inaccurate
- Michael P on Nov 27, 2020
BEST ANSWER: "This bracket is tapped for 10/32 screws and includes 24 such screws"
- Reply
- Inaccurate
- Michael P on Nov 27, 2020
Vote for the best answer above!
Are you able to stack 2 of these to turn it into a 8U rack?
A shopper
on May 15, 2023
BEST ANSWER: Assuming everything is level, yes.
- Reply
- Inaccurate
- Jonathon Karis K on May 25, 2023
- Purchased on May 23, 2023
BEST ANSWER: Assuming everything is level, yes.
- Reply
- Inaccurate
- Jonathon Karis K on May 25, 2023
- Purchased on May 23, 2023
Vote for the best answer above!
Questions For Similar Products
Reviews
4.5 / 5.0
71 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
46
16
6
2
1
Rated 3 out of 5
Works fine, flimsy
Works fine. Love that it has built-in nuts. But very flimsy and wobbly
Be careful when installing. Even half a degree slope looks very wonky
Be careful when installing. Even half a degree slope looks very wonky
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 3 out of 5
good but small
I bought this to help me place a Unifi UDM Pro in the basement and act as a sort of central touchpoint for my wired network. it's small and as other have said a bit flimsy until fully installed and populated (the sound it makes when you pick it up reminds me of a saw blade). so far, so good, it's exactly what I was looking for!
however, this just BARELY fits the UDM pro and does not have room for the power cord so I'm having to buy a 90 degree cord to get my network up and running. womp womp womp.
that being said, I'm still really happy with it and would recommend it!
however, this just BARELY fits the UDM pro and does not have room for the power cord so I'm having to buy a 90 degree cord to get my network up and running. womp womp womp.
that being said, I'm still really happy with it and would recommend it!
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Solid item
Good solid item. Happy with it. Did have a little trouble with one screw hole, but basically this worked well for my purpose.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Nice unit but it needs some structural supports
Its really nice but it wobbles side to side too much. Needs some bracing.
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Work as shown
This product worked as we needed.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
A bit tight
Works pretty good, however the applicable i have in it (UDM-PRO) is a bit tight however it fits just not clean looking. Install was easy.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Never pickup at their warehouse!
The bracket is great, but Ill never pick up at Monoprice again. Long wait, poor service, nasty people.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Great buy, great rack , screws included.
Just as described perfect shape everything lines up just right. If i had to order another ill get it from here next .
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Reviews for Similar Products