Stage Right by Monoprice LR100 Ribbon Microphone with Shock Mount
Product # 625908
UPC # 889028163054
$27.99
$99.99
Save $72.00 (72%)
*Affirm is not available for business or international orders
This item has been discontinued
Qty: 1
$27.99
$99.99
Qty: 2-9
$27.99
$96.99
Qty: 10-19
$27.99
$95.49
Qty: 20-49
$27.99
$93.99
Qty: 50+
$27.99
$92.49
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:

If your question is about more than one item, click + to add them.

Browse 10 questions
Browse 10 questions
and 47 answers
What is the function of the switch with the straight line and angled line?
Brian C
on Sep 13, 2021
BEST ANSWER: It’s a low frequency roll off switch. When flat, all the lower frequencies pass through. The “angled” setting rolls off the low bass frequencies - typically 50-80 hz. It prevents the muddiness of those lows creeping into your mix. It also reduces “proximity effect”, when vocals get boomy because the performer’s mouth is too close to the mic.
- Reply(1)
- Inaccurate
- DENIS R S on Sep 13, 2021
- Purchased on Jan 5, 2021
BEST ANSWER: It’s a low frequency roll off switch. When flat, all the lower frequencies pass through. The “angled” setting rolls off the low bass frequencies - typically 50-80 hz. It prevents the muddiness of those lows creeping into your mix. It also reduces “proximity effect”, when vocals get boomy because the performer’s mouth is too close to the mic.
- Reply(1)
- Inaccurate
- DENIS R S on Sep 13, 2021
- Purchased on Jan 5, 2021
Straight line is flat freq and angled line is for bass rolloff.
- Reply
- Inaccurate
- Steve C on Sep 13, 2021
- Purchased on Aug 14, 2021
The angled line represents a "high pass filter' or a " bass roll off" When the switch on the angled line, it reduces the low frequencies that are almost always unnecessary for a good recording. It reduces low frequency rumbling sounds such as a passing truck that could add noise to your recording. The straight line mean that the high pass filter is off and the microphone will pick up very low frequency sounds.
- Reply
- Inaccurate
- David E on Sep 14, 2021
- Purchased on Sep 1, 2021
That is a low frequency cut off filter to eliminate low thuds sounds from bleeding into the mic. Very Typically a 20hz or 10 hz filter. Super great Ribbon mic BTW. I'd spend $700 if the cost that much.
- Reply
- Inaccurate
- Michael O on Sep 13, 2021
- Purchased on Dec 31, 2020
That's the high pass filter. Engage this of you're recording vocals or higher frequency sounds to help control or even eliminate any low end rumbles, such as traffic, air conditioning, etc.
- Reply
- Inaccurate
- JC on Sep 13, 2021
- Purchased on Aug 20, 2021
The side with the angle down is a low cut designed to reduce low frequency sounds from your recordings - the side with the straight line does not remove low frequency sounds.
- Reply
- Inaccurate
- Russel F on Sep 13, 2021
- Purchased on Aug 14, 2021
I would like to help but it's been well over a month and I am STILL WAITING for my microphone to come from Monoprice... this will likely be my very last purchase from them...
- Reply
- Inaccurate
- ANDREW A. on Sep 13, 2021
- Purchased on Sep 8, 2021
This is a high pass filter, that cuts excessive rumble from the signal when set to the angled form. Reduces bass, it’s a pictogram of bass frequency being cut or left flat.
- Reply
- Inaccurate
- Peter J on Sep 13, 2021
- Purchased on Jan 19, 2021
The straight line represents the switch position for a flat frequency response. The angled line represents the switch position for low frequency roll-off.
- Reply
- Inaccurate
- Jeffrey G on Sep 13, 2021
- Purchased on Aug 2, 2021
The one with the straight line is a -10db overall reduction, while the one with the bent pad, is a reduction in bass response, if boominess is an issue.
- Reply
- Inaccurate
- RONALD S on Sep 14, 2021
- Purchased on Aug 18, 2021
That is a lo cut filter that reduces low bass. When the mic is very close to a source bass is exaggerated and the filter helps restore the balance.
- Reply
- Inaccurate
- New User U on Sep 13, 2021
- Purchased on Jan 6, 2021
Angled line reflects high pass filter (it rolls off some of the low end which limits rumble and over accented bass frequencies...)
- Reply
- Inaccurate
- ANDREW A. on Dec 13, 2021
- Purchased on Aug 14, 2021
It’s a 10dB low cut filter. I don’t believe they specify what frequency it’s set to attenuate, but I’d imagine 100Hz or so
- Reply
- Inaccurate
- Ethan B on Sep 13, 2021
- Purchased on Aug 25, 2021
It's a bass roll off switch to reduce bass rumble etc. The angle is the cut position.
- Reply
- Inaccurate
- Bubba on Nov 21, 2022
- Purchased on Oct 31, 2022
Low end frequency cut please check specs some mics some like 80 to 40hrz
- Reply
- Inaccurate
- Raymond S K on Sep 13, 2021
- Purchased on Jul 15, 2021
Vote for the best answer above!
Would this be good for Trumpet? My friends are buying Royer but I cannot afford that.
John E
on Dec 13, 2021
BEST ANSWER: Ribbon Mic's are fairly fragile... I am happy with the performance of the two I have but I use them for acoustic guitar so very little "wind" hit's the mic ribbon. If you are careful you can use this but direct impact might be to severe so blow "off access"... Note these are a bit noisier than Royers (hence the pricing differential)... but if you are recording in an ensemble environment, the noise will be somewhat buried. If you are looking for "live performance mic" you are better off with a Shure 57 or 58 which are less sensitive but more rugged.
- Reply
- Inaccurate
- ANDREW A. on Dec 13, 2021
- Purchased on Sep 8, 2021
BEST ANSWER: Ribbon Mic's are fairly fragile... I am happy with the performance of the two I have but I use them for acoustic guitar so very little "wind" hit's the mic ribbon. If you are careful you can use this but direct impact might be to severe so blow "off access"... Note these are a bit noisier than Royers (hence the pricing differential)... but if you are recording in an ensemble environment, the noise will be somewhat buried. If you are looking for "live performance mic" you are better off with a Shure 57 or 58 which are less sensitive but more rugged.
- Reply
- Inaccurate
- ANDREW A. on Dec 13, 2021
- Purchased on Sep 8, 2021
I think, depending on your style, you might like this mic. I bought two, and while they both have that ineffable ribbon quality they do not sound the same. One is noisier than the other. If you got the noisy version, but had an aggressive style the noise would be masked and you’d still get the smoothness of the ribbon, at least if yours sounds like mine. I will probably try to take them apart and match them before I use them again. I’m all about stereo.
- Reply
- Inaccurate
- New User U on Dec 13, 2021
- Purchased on Jan 6, 2021
It's not on a par with a Royer but it will work on trumpet. I've tracked trumpet, alto saxophone and trombone with it. It's a bargain for sure but it's not going to sound like a Royer (which I also own and use). Good luck!
- Reply
- Inaccurate
- Carl B on Dec 13, 2021
- Purchased on Aug 14, 2021
Absolutely! Maybe place a spit/pop screen in front - for live, you'd have to side fill your monitors if you're not on IEMs to ee p wedged from getting loose.
- Reply
- Inaccurate
- Robert M on Dec 13, 2021
- Purchased on Jul 24, 2021
It’d work well for a trumpet. Remember that ribbon mics pick up sound from both sides, so it may not be the best for live performance
- Reply
- Inaccurate
- J.R. T on Dec 13, 2021
- Purchased on Aug 14, 2021
Actually yes. For recording that is. Maybe not so much for live due to the figure 8 pick up pattern. But for recording yes.
- Reply
- Inaccurate
- Jakob F on Dec 13, 2021
- Purchased on Aug 16, 2021
In my opinion it would. This is a very underrated ribbon mic....and I think a trumpet would sound great through it
- Reply
- Inaccurate
- Jeremy B on Dec 16, 2021
- Purchased on Aug 15, 2021
Possibly. I use them to mic guitar speaker cabinets. They can take volume.
- Reply
- Inaccurate
- Michael on Dec 13, 2021
- Purchased on Jul 18, 2021
I have only used it on guitar cabinets.
- Reply
- Inaccurate
- ed on Dec 13, 2021
- Purchased on Jul 14, 2021
Vote for the best answer above!
I did not get an user's manual or spec sheet with the product. Are we supposed to intuit this information? Am I supposed to use phantom power or not? Recommendation for a preamp that works well with this? Do I need a high gain one? Some ribbbon mics can be damaged by using phantom power.. Does it have an internal preamp? can this be tuirned off? All kinds of interesting questions....
New User U
on Nov 7, 2022
BEST ANSWER: It requires phantom power because there is a preamp built in. As for preamps, I've used an RNP and the Midas ones and they work fine.
Answers to questions not asked :-) = Front and back are different, so it's not the best mic for M/S recordings. Sides sound almost similar, but not identical. I haven't used it enough to know what side I prefer This is the first ribbon I've owned. It's ... weird. It has much more extended hi-freq response that what I've read that a ribbon usually has.
One last thing - the head basket does not sound nice. I think it needs to be dampened, so I use this with the foam windscreen protector all the time.
Answers to questions not asked :-) = Front and back are different, so it's not the best mic for M/S recordings. Sides sound almost similar, but not identical. I haven't used it enough to know what side I prefer This is the first ribbon I've owned. It's ... weird. It has much more extended hi-freq response that what I've read that a ribbon usually has.
One last thing - the head basket does not sound nice. I think it needs to be dampened, so I use this with the foam windscreen protector all the time.
- Reply
- Inaccurate
- Arthur S on Dec 1, 2022
- Purchased on Nov 4, 2022
BEST ANSWER: It requires phantom power because there is a preamp built in. As for preamps, I've used an RNP and the Midas ones and they work fine.
Answers to questions not asked :-) = Front and back are different, so it's not the best mic for M/S recordings. Sides sound almost similar, but not identical. I haven't used it enough to know what side I prefer This is the first ribbon I've owned. It's ... weird. It has much more extended hi-freq response that what I've read that a ribbon usually has.
One last thing - the head basket does not sound nice. I think it needs to be dampened, so I use this with the foam windscreen protector all the time.
Answers to questions not asked :-) = Front and back are different, so it's not the best mic for M/S recordings. Sides sound almost similar, but not identical. I haven't used it enough to know what side I prefer This is the first ribbon I've owned. It's ... weird. It has much more extended hi-freq response that what I've read that a ribbon usually has.
One last thing - the head basket does not sound nice. I think it needs to be dampened, so I use this with the foam windscreen protector all the time.
- Reply
- Inaccurate
- Arthur S on Dec 1, 2022
- Purchased on Nov 4, 2022
Great questions! Yes, the mic requires phantom power. I am using it in a home recording setup as a vocal mic because of its warm sound and have fallen in love with it. I use an ART USB Dual Pre-amp/Computer interface. I have it set to about 18db of gain as opposed to a condenser mic on the other side of the interface that only needs 8 db of gain to match levels. There are only two switches on it, one for Low Frequency roll-off and one for a 10db pad. Hope this helps.
- Reply
- Inaccurate
- Dano on Nov 30, 2022
- Purchased on Oct 11, 2022
From Monoprice's site:
BEST ANSWER: You don't have to intuit this information, it's available on the Monoprice web page for this mic. It's described as having active electronics and requiring +48 VDC phantom power. The sensitivity is ‑32dB ±2dB (0dB=1V/Pa @1kHz). It will work fine with your favorite mic preamp assuming it supplies phantom power.
BEST ANSWER: You don't have to intuit this information, it's available on the Monoprice web page for this mic. It's described as having active electronics and requiring +48 VDC phantom power. The sensitivity is ‑32dB ±2dB (0dB=1V/Pa @1kHz). It will work fine with your favorite mic preamp assuming it supplies phantom power.
- Reply
- Inaccurate
- Unhappy! on Nov 30, 2022
- Purchased on Jan 3, 2022
You don't have to intuit this information, it's available on the Monoprice web page for this mic. It's described as having active electronics and requiring +48 VDC phantom power. The sensitivity is ‑32dB ±2dB (0dB=1V/Pa @1kHz). It will work fine with your favorite mic preamp assuming it supplies phantom power.
- Reply
- Inaccurate
- Edward B on Nov 30, 2022
- Purchased on Aug 20, 2022
I am not a professional sound guy but I do know this ribbon mic does require phantom power. There are a few you tubes about it that you may find informative.
- Reply
- Inaccurate
- Jeff W on Nov 30, 2022
- Purchased on Sep 16, 2022
Description says it’s active so use phantom power. Of course you can’t bypass the internal circuitry unless you are an electrical engineer.
- Reply
- Inaccurate
- Bob on Dec 2, 2022
- Purchased on Jul 15, 2022
The only info that I received was on the side of the box. Let me know if you need to take that up for you if you didn’t get a box with Info.
- Reply
- Inaccurate
- Chad P on Nov 30, 2022
- Purchased on Oct 26, 2022
Has internal pre-amp, powered by phantom. Because of that, you should not need a high-gain pre-amp. Pre-amp cannot be turned off.
- Reply
- Inaccurate
- Norton L on Nov 30, 2022
- Purchased on Oct 26, 2022
Yes. As it says on the website and on the box it is an active ribbon mic. Needs phantom.
- Reply
- Inaccurate
- jason t on Nov 30, 2022
- Purchased on Oct 26, 2022
Vote for the best answer above!
Is the ribbon corrugated? Thanks
Carlos Lopez L
on Jan 21, 2021
BEST ANSWER: Yes, the ribbon is corrugated. This is a "straight-forward" ribbon mic, with a very "ribbon mic" sound: Large "full" bass, super smooth mid-low response, detailed mid and upper-mid response, and a high-end that rolls off starting at about 14kHz. Note: Like most ribbons, this mic stops responding at around 17kHz to 18kHz. If you place a ton of importance on a presence peak in the 14kHz to 19kHz range that you get from many (most) condenser mics, then you may not like the sound of a ribbon mic.
- Reply
- Inaccurate
- David P on Jan 21, 2021
- Purchased on Jan 5, 2021
BEST ANSWER: Yes, the ribbon is corrugated. This is a "straight-forward" ribbon mic, with a very "ribbon mic" sound: Large "full" bass, super smooth mid-low response, detailed mid and upper-mid response, and a high-end that rolls off starting at about 14kHz. Note: Like most ribbons, this mic stops responding at around 17kHz to 18kHz. If you place a ton of importance on a presence peak in the 14kHz to 19kHz range that you get from many (most) condenser mics, then you may not like the sound of a ribbon mic.
- Reply
- Inaccurate
- David P on Jan 21, 2021
- Purchased on Jan 5, 2021
Hard to tell, precisely, due to the pattern of the screen. If it is corrugated or embossed, it is not deep. Ribbon assembly is massive - running the full length of the enclosure and 2/3rds of its width. Performs beautifully. Hope this helps.
- Reply
- Inaccurate
- DENIS R S on Jan 21, 2021
- Purchased on Jan 5, 2021
I haven’t looked inside, but I expect that it is.
- Reply
- Inaccurate
- New User U on Jan 21, 2021
- Purchased on Jan 6, 2021
Vote for the best answer above!
I am interested in using two of these in Blumlein pair, is the figure 8 pattern evenly sensitive on both sides? Are these a good choice for an entry-level Blumlein pair?
David P
on Jan 5, 2021
BEST ANSWER: I think it depends on what you are recording. Mine sound the same on both sides. Generally I would say they were too dark for general blumlein recording such as orchestral or choirs but ok for bright things such as drums as room mics. I would go with normal condensers for general blumlein pairs such as Cad m79 for budget figure 8. Hope that helps.
- Reply
- Inaccurate
- Bubba on Nov 21, 2022
- Purchased on Oct 31, 2022
BEST ANSWER: I think it depends on what you are recording. Mine sound the same on both sides. Generally I would say they were too dark for general blumlein recording such as orchestral or choirs but ok for bright things such as drums as room mics. I would go with normal condensers for general blumlein pairs such as Cad m79 for budget figure 8. Hope that helps.
- Reply
- Inaccurate
- Bubba on Nov 21, 2022
- Purchased on Oct 31, 2022
It took a while to get them but they are outstanding for a Blumlien pair, very worth the wait Andrew. I just used them for room mics in a drum tracking session and there's are better than the other pair of Sterling ribbons I have. Are they as good as Royers? IDK, can't afford Royers, but I 100% love the results I'm getting.
- Reply
- Inaccurate
- David P on Sep 14, 2021
- Purchased on Aug 13, 2021
Vote for the best answer above!
Would this make a good vocal microphone?
Gary Z
on Jan 8, 2021
BEST ANSWER: Typically ribbon mics are used to capture guitar cabs, drums overheads or room. I would not use it to record vocals because of the plosives when doing P's. Also, one user compared these to the Coles microphones, which are dark sounding microphones. I'd suggest you get the LTM500, it's a tube mic, more warm sounding and perfect for vocals. Or if you want another mic in the same price range the LC200 is a great option, but more bright and less round sounding if you will
- Reply
- Inaccurate
- Carlos Lopez L on Jan 14, 2021
- Purchased on Jan 5, 2021

Stage Right by Monoprice LC200 Large 34mm Diaphragm Multi-Pattern Studio Condenser Microphone with Pad/Filter and Shock Mount

Stage Right by Monoprice LTM500 Large 9-position Multi-Pattern Tube Studio Condenser Microphone with 34mm Diaphragm and Shock Mount
BEST ANSWER: Typically ribbon mics are used to capture guitar cabs, drums overheads or room. I would not use it to record vocals because of the plosives when doing P's. Also, one user compared these to the Coles microphones, which are dark sounding microphones. I'd suggest you get the LTM500, it's a tube mic, more warm sounding and perfect for vocals. Or if you want another mic in the same price range the LC200 is a great option, but more bright and less round sounding if you will
- Reply
- Inaccurate
- Carlos Lopez L on Jan 14, 2021
- Purchased on Jan 5, 2021

Stage Right by Monoprice LC200 Large 34mm Diaphragm Multi-Pattern Studio Condenser Microphone with Pad/Filter and Shock Mount

Stage Right by Monoprice LTM500 Large 9-position Multi-Pattern Tube Studio Condenser Microphone with 34mm Diaphragm and Shock Mount
These mics have a mellow tone, so they are popular to "mellow out" something like an electric guitar cab. They can be used to "take the edge" off a screechy vocal. SOME vocals it will really shine on, if a gentle sound is what you're hoping for.... Jim Reeves vocal... YES..........Punk Rock vocal... NO.
- Reply
- Inaccurate
- Mister V on Dec 1, 2022
- Purchased on Sep 22, 2022
Vote for the best answer above!
Has any one used them in true MS format head to head..with or without amixing transformer?
A shopper
on Apr 15, 2022
BEST ANSWER: If you mean blumlein, I have used them on drums front of kit and room for acoustic guitar / vocalist. I liked them in both applications, but they were mixed with close mics both times. MS to me would imply a cardioid for the mid mic. These have an internal transformer so you don't really need a cloudlifter or the like. At the price they were definitely worth it for me.
- Reply
- Inaccurate
- Ivy W on Apr 15, 2022
- Purchased on Nov 30, 2021
BEST ANSWER: If you mean blumlein, I have used them on drums front of kit and room for acoustic guitar / vocalist. I liked them in both applications, but they were mixed with close mics both times. MS to me would imply a cardioid for the mid mic. These have an internal transformer so you don't really need a cloudlifter or the like. At the price they were definitely worth it for me.
- Reply
- Inaccurate
- Ivy W on Apr 15, 2022
- Purchased on Nov 30, 2021
I have used this mic with various cardioid condenser mics for drum overheads in an MS configuration. An EQ is definitely necessary to match and blend the responses of both mics. I've been very happy with the low end and the smooth, UN-harsh cymbal tones.
- Reply
- Inaccurate
- Ken K on Nov 30, 2022
- Purchased on Apr 2, 2022
Vote for the best answer above!
Does this microphone (LR100) have an offset-ribbon design, or is the ribbon dead center inside the basket? Thanks!
A shopper
on Jan 16, 2021
BEST ANSWER: Eyeballing it, without removing the basket, it seems to be centered.
- Reply
- Inaccurate
- Arthur S on Dec 1, 2022
- Purchased on Nov 4, 2022
BEST ANSWER: Eyeballing it, without removing the basket, it seems to be centered.
- Reply
- Inaccurate
- Arthur S on Dec 1, 2022
- Purchased on Nov 4, 2022
Vote for the best answer above!
Is the front of this microphone the side where the switches are located? It appears that the LR100 is out of phase with other mics if this side is used, so I just want to verify that I’m using the correct side to address the captured source.
New User U
on Dec 16, 2021
BEST ANSWER: This mic utilizes a "figure-8" polar pattern. Which means that both the front and back sides of it's internal metal windscreen are equally sensitive to the acoustic source either side is directly facing (specifically referring to the the broad and flat sides of the windscreen - one side with the two switches beneath it, and one side without the switches). Each side is identical to the other, and each side's polar pattern is unidirectional. Hence "figure of 8". If you are recording a single source (a vocal), you can use either side. Figure 8 is obviously ideal for recording two vocalists simultaneously, and it also makes a very good ambient, or room mic, as can also be used as part of a "mid-side" setup.
- Reply
- Inaccurate
- MixFixer B on Mar 21, 2022
- Purchased on Mar 14, 2022
BEST ANSWER: This mic utilizes a "figure-8" polar pattern. Which means that both the front and back sides of it's internal metal windscreen are equally sensitive to the acoustic source either side is directly facing (specifically referring to the the broad and flat sides of the windscreen - one side with the two switches beneath it, and one side without the switches). Each side is identical to the other, and each side's polar pattern is unidirectional. Hence "figure of 8". If you are recording a single source (a vocal), you can use either side. Figure 8 is obviously ideal for recording two vocalists simultaneously, and it also makes a very good ambient, or room mic, as can also be used as part of a "mid-side" setup.
- Reply
- Inaccurate
- MixFixer B on Mar 21, 2022
- Purchased on Mar 14, 2022
Vote for the best answer above!
What is the diameter of the mic's body?
A shopper
on Mar 23, 2022
BEST ANSWER: 1.9 inches. No taper, it measures the same at either end.
- Reply(1)
- Inaccurate
- ROBERT B on Mar 23, 2022
- Purchased on Sep 2, 2021
Thank you, sir.
- Reply
- New User U on Mar 23, 2022
BEST ANSWER: 1.9 inches. No taper, it measures the same at either end.
- Reply(1)
- Inaccurate
- ROBERT B on Mar 23, 2022
- Purchased on Sep 2, 2021
Thank you, sir.
- Reply
- New User U on Mar 23, 2022
Vote for the best answer above!
Reviews
4.6 / 5.0
25 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
20
2
1
1
1
Rated 5 out of 5
Great Price Great Value
I was looking for a bullet proof ribbon microphone for Villa Guerilla Studios. The Monoprice LR100 Ribbon Microphone. fit the bill.
- Was this review helpful? Yes (1) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (1)
- Flag as Inappropriate
Rated 5 out of 5
Great mic
Great mic for my acoustic instruments that also rounds out the vocal sounds nicely as well.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Rated 2 out of 5
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Amazing sound for that insane price!
I got a pair of these and a pair of Coles 4038 for drum and guitar cabs. After EQ, both brands sounded remarkably similar. The Monoprice mics have more bass around the 125 Hz - 300 Hz range, but with EQ those mids and highs were there. I cannot believe what a value these are.
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Coming soon ?
Sorry - they will be a Christmas gift so - unknown performance.
- Was this review helpful? Yes (0) No (5)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (5)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Works good for tube guitar amp speaker mic etc.
I got it on sale and it is well worth the money. I use it on a Celestion speaker for crunchy guitar tube amp sounds. It tames the crunchiness and adds a dark full sound----I also use a sm57 in conjunction and its a nice balance---neither one sounds as good alone. Nice addition to my mic collection. Both sides of mine sound pretty much the same. Probably would work good on any bright sound you want to tame such as a sax or trumpet etc. I like that it is active and has plenty of gain / level. Mine seems quiet enough. Would buy again.
- Was this review helpful? Yes (2) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (1)
- Flag as Inappropriate
Rated 5 out of 5
Great mic at any price.
Great sounding, heavy mic that instantly improved the sound of my vocals.



- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 3 out of 5
Good but Susceptible to 60kZ Hum
It is good. It sound similar to a Rode NT1 original series but with a figure-8 pattern.
I would have given it a four star rating but there is one issue. The microphone is not shielded very well. It will pickup 60Hz in certain olcatioc in my studio. If I move to another place the hum goes away. I do not have this problem with any of my other microphones.
I scaped some of the powder coating off of the body to maybe help the grounding. I will ceck the results.
I would have given it a four star rating but there is one issue. The microphone is not shielded very well. It will pickup 60Hz in certain olcatioc in my studio. If I move to another place the hum goes away. I do not have this problem with any of my other microphones.
I scaped some of the powder coating off of the body to maybe help the grounding. I will ceck the results.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Good value
Mellow sound, low noise. This may be the ticket if you are recording a bright source signal.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate