Stage Right by Monoprice 2in Stage Lighting O-Clamp for Truss and Stands w/ 1 and 1.5in Inserts
Product # 601000
UPC # 889028059203
$11.99
*Affirm is not available for business or international orders
Qty:
Out of Stock
ETA: 2/18/2024
Note:
Due to limited supply, all products are sold on a first-come first-serve basis. Auto Notification does not guarantee either availability or price. All prices are subject to change without notice.
*Your information will only be used to notify you when this item becomes available.
Qty: 1
$11.99
Qty: 2-9
$11.51
Qty: 10-19
$11.27
Qty: 20-49
$11.03
Qty: 50+
$10.79
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 5 questions
Browse 5 questions
and 8 answers
Would I be able to remove the 10M light mounting screw , if need be?
A shopper
on Nov 26, 2018
BEST ANSWER: Yes, The mounting screw is a ~1" long hex-headed bolt with a wingnut and washers on the outside. When you remove the plastic liner you will see the head, captured in the clamp body and supported by a steel spreader plate. I guess you could remove this and insert a screw from the outside into a nut on the inside, but you'd need to be able to turn the external screw, as the clamp body would probably make it impossible to turn the nut.
- Reply
- Inaccurate
- CHARLES T. on Nov 27, 2018
- Purchased on Jan 21, 2018
BEST ANSWER: Yes, The mounting screw is a ~1" long hex-headed bolt with a wingnut and washers on the outside. When you remove the plastic liner you will see the head, captured in the clamp body and supported by a steel spreader plate. I guess you could remove this and insert a screw from the outside into a nut on the inside, but you'd need to be able to turn the external screw, as the clamp body would probably make it impossible to turn the nut.
- Reply
- Inaccurate
- CHARLES T. on Nov 27, 2018
- Purchased on Jan 21, 2018
Yes, the mounting bolt can be removed. A 3/8" bolt can be used. I've uses a 5/16" bolt in these also for special applications. Place a "tang" or a "toothed" washer under the bolt head to lock in position
- Reply
- Inaccurate
- Lance W on Dec 4, 2018
- Purchased on Nov 19, 2017
Yes.
I did because I have a few off brand units that use a smaller mount. you may need to be a bit creative though?
I used epoxy to secure my smaller bolt
I did because I have a few off brand units that use a smaller mount. you may need to be a bit creative though?
I used epoxy to secure my smaller bolt
- Reply
- Inaccurate
- DAVID W. on Nov 26, 2018
- Purchased on Jun 9, 2018
Yes, you can. All you have to do is remove the sizing insert, and I would recommend adding a washer if you're going to a smaller diameter bolt.
- Reply
- Inaccurate
- Kendrick A on Dec 31, 2018
- Purchased on Jul 13, 2018
Don’t think so , its on a shaft running thru the piece
- Reply
- Inaccurate
- Charles F on Nov 26, 2018
- Purchased on Sep 30, 2018
Vote for the best answer above!
What are the size of the tubes? Looking for O Clamps to hang lights and not sure if the ones with a 1" adapters will be usable.
New User U
on Oct 8, 2022
Stage Right by Monoprice 2in Stage Lighting O-Clamp for Truss and Stands w/ 1 and 1.5in Inserts
Stage Right by Monoprice 12.5ft Lighting Stand System with Truss, 200 lbs. Capacity and 4ft T-bars
Stage Right by Monoprice 2in Stage Lighting O-Clamp for Truss and Stands w/ 1 and 1.5in Inserts 10-pack
BEST ANSWER: Use the 1.5" insert. 1" will be way too small.
- Reply
- Inaccurate
- Lee Hollaar H on Oct 17, 2022
- Purchased on Jun 24, 2021
BEST ANSWER: Use the 1.5" insert. 1" will be way too small.
- Reply
- Inaccurate
- Lee Hollaar H on Oct 17, 2022
- Purchased on Jun 24, 2021
Vote for the best answer above!
Anyone used two of these together to clamp one pole onto another? What bolt length did you use?
I'm looking to set up a temporary movie screen using some lightweight poles. I'd adjust these two clamps at the desired angles and then re-insert the sizing collars to fit the appropriate pole sizes.
I'm looking to set up a temporary movie screen using some lightweight poles. I'd adjust these two clamps at the desired angles and then re-insert the sizing collars to fit the appropriate pole sizes.
Bill K
on Aug 24, 2020
I bought this music stand from you- Monoprice Sheet Music Stand. The clamp no longer works. Would this product be compatible with it?
james p
on Jul 25, 2021
Does part number 601000 (Monoprice 1, 1.5, 2 in. O-clamp) fit this truss? I have the ADJ brand O-clamp of the same size options as well as metric O-clamps (36mm), neither of which fit. This pipe diameter of this truss kit seems to be 1.5 inches but based on the ADJ O-clamp not fitting, I wonder if it is slightly larger and non-standard in size. The specifications are not in the product manual, which consists solely of setup instructions.
Joshua A
on May 4, 2022
Stage Right by Monoprice 2in Stage Lighting O-Clamp for Truss and Stands w/ 1 and 1.5in Inserts
Stage Right by Monoprice 12.5ft Lighting Stand System with Truss, 200 lbs. Capacity and 4ft T-bars
Questions For Similar Products
Reviews
4.9 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
1
0
0
0
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Nice, Sturdy, and Affordable
We needed a bunch of these for lights at church, and these have worked really well. The heaviest lighting fixtures we use are about 2 to 3 pounds and this is holding it up, no problem. We also attached safety cables though just to be safe. These are cheaper than the name-brand stuff and when you need 20 of these, the savings add up. Definitely recommend.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Perfect fit!
Held par lights to my speaker stands just right.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
How to fit three different pipe sizes.
It appears that the way to make it fit three different sizes of truss pipe is to swap out the inserts. It comes with two sizes of inserts. Large inserts and it will fit 2" pipe. Small inserts and it will fit 1" pipe. One of each and you'll get it to fit the 1.5" pipe.The build quality looks pretty good. The specs say that they'll hold 76 pounds, but I'd be afraid that the pin in the clamp side might pull out/crack at that weight.Always use a secondary safety cable around your light and the truss in case the clamp fails!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
These are the bomb!
Same quality as the "name brand" makes that continue to rise in price every time you buy them. Same heavy, durable plastic you have come to know & love...only cheaper priced!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Stage right
Superb product at very reasonable price , well made .
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Works great don't know how I got by without them
The clamps work great. easy to reposition equipment on the bar in a fly
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Work very well
For the price these work very well. I only used them for light weight 2-5lb lights so not sure about heavy weight lights. But for the LED fixtures I use they work great.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products