Monoprice 14 Outlet Metal 1U Rackmount PDU Power Distribution Unit with Ampere Meter, 8 Rear 6 Front NEMA 5-15R Outlets, 15A Circuit Breaker, 6ft Cord
Product # 40003
UPC # 889028141595
$79.99
*Affirm is not available for business or international orders
- FREE STANDARD US SHIPPING
- Eligible for Coupon(s) EXTRA
Qty: 1
$79.99
Qty: 2-9
$79.99
Qty: 10-19
$79.99
Qty: 20-49
$79.99
Qty: 50+
$79.99
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 9 questions
Browse 9 questions
and 15 answers
If the amp meter stops showing any draw (zero amps), is there a way to reset something for it to work again? Or is that part of the unit done for?
A shopper
on Aug 6, 2021
BEST ANSWER: No, not on this product. I am not sure if MP sells a product that would do what you are asking.
- Reply
- Inaccurate
- Neil C on Aug 6, 2021
- Purchased on Feb 24, 2021
BEST ANSWER: No, not on this product. I am not sure if MP sells a product that would do what you are asking.
- Reply
- Inaccurate
- Neil C on Aug 6, 2021
- Purchased on Feb 24, 2021
I have had the same issue and was able to reset the device by unplugging and plugging the PDU.
- Reply
- Inaccurate
- Wise one on Aug 6, 2021
- Purchased on Nov 30, 2020
Pull the power cord and wait a few seconds, then plug back it. That's what did it for me.
- Reply
- Inaccurate
- Evelyn F on Oct 17, 2022
- Purchased on Oct 7, 2021
Vote for the best answer above!
Is the meter readout displaying the amps being drawn from items plugged into the strip or is it simply showing the amps being fed into the strip? If I plug something into the strip is the meter displaying the amps being drawn?
Dave J
on Oct 20, 2022
BEST ANSWER: Yes and it will fluctuate as you add or remove devices showing near real time. I have this connected to a UPS and both are pretty close on amp draw so it appears to be accurate.
- Reply
- Inaccurate
- Jessie G on Oct 20, 2022
- Purchased on Aug 21, 2022
BEST ANSWER: Yes and it will fluctuate as you add or remove devices showing near real time. I have this connected to a UPS and both are pretty close on amp draw so it appears to be accurate.
- Reply
- Inaccurate
- Jessie G on Oct 20, 2022
- Purchased on Aug 21, 2022
Vote for the best answer above!
What's the product weight?. Looking for something on lighter side <2KG
A shopper
on Apr 12, 2021
BEST ANSWER: 3.2 pounds = 1.5Kg. It is made of metal
- Reply
- Inaccurate
- KEVIN G on Jun 15, 2021
- Purchased on Jun 9, 2021
BEST ANSWER: 3.2 pounds = 1.5Kg. It is made of metal
- Reply
- Inaccurate
- KEVIN G on Jun 15, 2021
- Purchased on Jun 9, 2021
Vote for the best answer above!
What does the button on the lower right corner of the ammeter display do?
scott d
on Apr 13, 2021
BEST ANSWER: Nothing that I can determine. I'm going to add a label with an arrow pointing to that little button stating "DO NOT PUSH THIS LITTLE BOTTON" just to see how many people push it. And if anyone asks about it first, I'll say
'push it and see" Then scream "NO!" just as they push it....
'push it and see" Then scream "NO!" just as they push it....
- Reply
- Inaccurate
- KEVIN G on Jun 15, 2021
- Purchased on Jun 9, 2021
BEST ANSWER: Nothing that I can determine. I'm going to add a label with an arrow pointing to that little button stating "DO NOT PUSH THIS LITTLE BOTTON" just to see how many people push it. And if anyone asks about it first, I'll say
'push it and see" Then scream "NO!" just as they push it....
'push it and see" Then scream "NO!" just as they push it....
- Reply
- Inaccurate
- KEVIN G on Jun 15, 2021
- Purchased on Jun 9, 2021
Vote for the best answer above!
Is this unit UL Listed?
Jim H
on May 21, 2021
BEST ANSWER: There is a UL sticker on it.
- Reply
- Inaccurate
- KEVIN G on Jun 15, 2021
- Purchased on Jun 9, 2021
BEST ANSWER: There is a UL sticker on it.
- Reply
- Inaccurate
- KEVIN G on Jun 15, 2021
- Purchased on Jun 9, 2021
Vote for the best answer above!
I'm considering using this surge protector power strip in my sound system rack case specifically for my three power amps. I do not want to plug the amps into a power conditioner, just a surge protector. Can this power strip handle three QSC power amps from a load standpoint?
Thanks,
Thanks,
A shopper
on Aug 18, 2020
BEST ANSWER: It's rated at 15 amps and has a built in 15 ampere resettable circuit breaker on the front panel. So if your QSC power amp draws less than 5 amperes then yes this will work ok for 3 QSC power amps.
- Reply
- Inaccurate
- KEVIN G on Jun 15, 2021
- Purchased on Jun 9, 2021
BEST ANSWER: It's rated at 15 amps and has a built in 15 ampere resettable circuit breaker on the front panel. So if your QSC power amp draws less than 5 amperes then yes this will work ok for 3 QSC power amps.
- Reply
- Inaccurate
- KEVIN G on Jun 15, 2021
- Purchased on Jun 9, 2021
Vote for the best answer above!
Can the mounting brackets be rotated 90 degrees and/or are there alternate mounting brackets included to flush mount this under a desk such that all of the front and rear outlets remain unblocked and usable?
A shopper
on Aug 11, 2021
Monoprice 14 Outlet Metal 1U Rackmount PDU Power Distribution Unit with Ampere Meter, 8 Rear 6 Front NEMA 5-15R Outlets, 15A Circuit Breaker, 6ft Cord
Monoprice 14 Outlet Metal 1U Rackmount PDU Power Distribution Unit Surge Protector, 6ft Cord, 1050 Joules
BEST ANSWER: One of the images shows a side view with the screws in a rectangular arrangement, not square, so out of the box seemingly not.
I suspect it has two covered tapped holes in the case underneath the ears, to allow it to be mounted in "reverse", to have the cord come from the "front", in which case you could probably drill extra holes in the ears to match those in an "under desk" orientation.
Alternatively, you can look for a wall mount "90 degree" rack (2-4U) and mount that on the underside of your desk, which can then hold routers, modems, switches, in one place, especially if they have ears.
I suspect it has two covered tapped holes in the case underneath the ears, to allow it to be mounted in "reverse", to have the cord come from the "front", in which case you could probably drill extra holes in the ears to match those in an "under desk" orientation.
Alternatively, you can look for a wall mount "90 degree" rack (2-4U) and mount that on the underside of your desk, which can then hold routers, modems, switches, in one place, especially if they have ears.
- Reply
- Inaccurate
- David M on Aug 12, 2021
BEST ANSWER: One of the images shows a side view with the screws in a rectangular arrangement, not square, so out of the box seemingly not.
I suspect it has two covered tapped holes in the case underneath the ears, to allow it to be mounted in "reverse", to have the cord come from the "front", in which case you could probably drill extra holes in the ears to match those in an "under desk" orientation.
Alternatively, you can look for a wall mount "90 degree" rack (2-4U) and mount that on the underside of your desk, which can then hold routers, modems, switches, in one place, especially if they have ears.
I suspect it has two covered tapped holes in the case underneath the ears, to allow it to be mounted in "reverse", to have the cord come from the "front", in which case you could probably drill extra holes in the ears to match those in an "under desk" orientation.
Alternatively, you can look for a wall mount "90 degree" rack (2-4U) and mount that on the underside of your desk, which can then hold routers, modems, switches, in one place, especially if they have ears.
- Reply
- Inaccurate
- David M on Aug 12, 2021
Vote for the best answer above!
Is there no on/off switch? Do you just push and hold the circuit breaker button if you want to reset all of your equipment?
David A
on Dec 16, 2022
BEST ANSWER: The button should only be active if it's been tripped like a breaker. Otherwise pressing it does nothing.
- Reply
- Inaccurate
- Adam T on Dec 16, 2022
- Purchased on Aug 30, 2022
BEST ANSWER: The button should only be active if it's been tripped like a breaker. Otherwise pressing it does nothing.
- Reply
- Inaccurate
- Adam T on Dec 16, 2022
- Purchased on Aug 30, 2022
Vote for the best answer above!
What is the depth of this unit?
Receiving D
on Oct 30, 2022
Questions For Similar Products
Reviews
5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Rated 5 out of 5
Great PDUs
These are great, inexpensive metered PDU's. Very happy with my purchase.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Perfect for my Wall of Amps
I use this to distribute AC power to my multiple Guitar Amps which I have shelved on one wall. I like the fact that there are outlets (receptacles) on both the back and the front of the distribution bar. I plug the permanent devices in the back and temporary devices in the front. The ammeter measures combined front and back sets of outlets. Quality steel and finish on this product.. Comes with rack mounting brackets and 4 bolts/nut/washer sets.
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
Rated 5 out of 5
I like the compact size with the numerous outlets. Real space saver!
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Perfect power strip for the rack project just completed
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Reviews for Similar Products