Monolith by Monoprice 24in Speaker Stand, Cherry (Each)
Product # 39168
UPC # 889028133309
$98.99
*Affirm is not available for business or international orders
Qty: 1
$98.99
Qty: 2-9
$97.20
Qty: 10-19
$95.39
Qty: 20-49
$93.59
Qty: 50+
$83.84
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 34 questions
Browse 34 questions
and 65 answers
Do you mount speakers to the plate?
A shopper
on Dec 16, 2021
BEST ANSWER: The plate is made of steel and powdercoated. The speaker sits on the plate, like you would place the speaker on a table. The plate mounting screws are countersinked into the plate, so they are just below flush with the surface of the plate, and the speaker sits flat on the plate. There are four black foam stick on pads circular 15mm diameter and 2mm thick included. These can be placed on the metal plate, and you could sit the speaker on the foam pads. I have my Yamaha HS8 monitor sitting on the plate without the pads, and the speakers do not have feet. This is wood to metal contact. The speaker is larger than the plate, with about a 5 cm overhang on each side. My stand is the 32 inches tall model. The speakers have been stable. When I bump into them, bump the stand, or press the switch on the back of the speaker, the speakers sometime move around, but they do not fall off. I hope this information helps you!
- Reply
- Inaccurate
- Peter R on Dec 16, 2021
BEST ANSWER: The plate is made of steel and powdercoated. The speaker sits on the plate, like you would place the speaker on a table. The plate mounting screws are countersinked into the plate, so they are just below flush with the surface of the plate, and the speaker sits flat on the plate. There are four black foam stick on pads circular 15mm diameter and 2mm thick included. These can be placed on the metal plate, and you could sit the speaker on the foam pads. I have my Yamaha HS8 monitor sitting on the plate without the pads, and the speakers do not have feet. This is wood to metal contact. The speaker is larger than the plate, with about a 5 cm overhang on each side. My stand is the 32 inches tall model. The speakers have been stable. When I bump into them, bump the stand, or press the switch on the back of the speaker, the speakers sometime move around, but they do not fall off. I hope this information helps you!
- Reply
- Inaccurate
- Peter R on Dec 16, 2021
The speakers sit on top of the plate. The only holes in the top plate are for the screws that hold it on the stand. There are 4 small non-slip dots to put at the corners of the plate.
- Reply
- Inaccurate
- David K on Dec 16, 2021
No. There are four small foam cushions that stick on top of the metal stand. The speaker just sits on top. My speakers weigh about 25 lbs each. It is a very stable platform.
- Reply
- Inaccurate
- Joseph S Bravenec I on Dec 21, 2021
- Purchased on Dec 9, 2021
The stands come with small self-adhesive foam dots to cushion the speakers, but there are no screw holes or similar attachment points.
- Reply
- Inaccurate
- NATHAN B on Dec 16, 2021
There is no built-in method for doing so. Speakers are held in place by gravity. I think that's typical for bookshelf speaker stands.
- Reply
- Inaccurate
- CJ S on Dec 16, 2021
- Purchased on Sep 15, 2021
No speakers are free standing not screwed into plate
These stands are for small surround speakers.
These stands are for small surround speakers.
- Reply
- Inaccurate
- BARRY M on Dec 16, 2021
No, not without your own custom drilling. Instead, stick-on felt pads are provides.
- Reply
- Inaccurate
- Paul C on Dec 16, 2021
No - it's a shelf with rubber grips. Seems unsteady, but I have had no issues.
- Reply
- Inaccurate
- Eric H on Dec 16, 2021
I did not, but there are holes if you want to
- Reply
- Inaccurate
- Robert W on Dec 16, 2021
- Purchased on Jul 25, 2021
Vote for the best answer above!
How tall are these 24" stands with the spikes installed? How much extra height do they add?
James A
on Mar 29, 2022
BEST ANSWER: My spikes on my 33" stands raise it 1.75 inches. Keep in mind these are sold as singles despite being named plural.
- Reply
- Inaccurate
- DUSTIN Duane D on Mar 29, 2022
BEST ANSWER: My spikes on my 33" stands raise it 1.75 inches. Keep in mind these are sold as singles despite being named plural.
- Reply
- Inaccurate
- DUSTIN Duane D on Mar 29, 2022
on the 24" stands with the isolation spikes in place a screwed all the way in, the measurement is 25 1/4" from the floor to the bottom of the speaker
- Reply
- Inaccurate
- Morris S on Mar 30, 2022
The spikes are about 1 to 2inches. I didn't us them as the stand sits on carpeting and they are not needed. Very good quality stands though.
- Reply
- Inaccurate
- DAVID M on Mar 29, 2022
the spikes raise the stand about an inch.
- Reply
- Inaccurate
- Cornelius S on Apr 4, 2022
- Purchased on Oct 7, 2021
The spikes are only an inch or so
- Reply
- Inaccurate
- David O on Mar 29, 2022
- Purchased on Feb 13, 2022
Vote for the best answer above!
I have a vinal flooring, I don't want to use the spikes, for fear they will pierce the flooring. What would you recommend? place something between the spikes and floor? But what material would be best for this?
Alan H. purchased Nov 18, 2022
Alan H. purchased Nov 18, 2022
A shopper
on Nov 19, 2022
BEST ANSWER: The spike just screw in and are removable. I dont use them either because the stand sits on carpet. This is a very high quality speaker stand.
- Reply
- Inaccurate
- DAVID M on Nov 20, 2022
BEST ANSWER: The spike just screw in and are removable. I dont use them either because the stand sits on carpet. This is a very high quality speaker stand.
- Reply
- Inaccurate
- DAVID M on Nov 20, 2022
Just don't use the spikes. They come detached and in a parts bag so just don't install them onto the stand.
- Reply
- Inaccurate
- V-Man on Nov 19, 2022
I have hardwood floors. I did not use spike and put thick felt pads on bottom of stands.
- Reply
- Inaccurate
- Thomas Wilhelm I on Nov 19, 2022
- Purchased on Oct 28, 2022
I just used some hard rubber stick-on feet in place of the spikes. They work fine.
- Reply
- Inaccurate
- New User U on Nov 19, 2022
Spikes are optional so you can just not use them and they work perfectly fine.
- Reply
- Inaccurate
- David O on Nov 19, 2022
- Purchased on Feb 13, 2022
Vote for the best answer above!
Yes they wood be but you just need to verify the height of the tweeter to your ear height from your listening position. Other than that, excellent stand for the $$. Be sure to use some form of isolation.
- Reply
- Inaccurate
- James K on Oct 8, 2020
- Purchased on Mar 29, 2020
I think they work nicely as I'm using these stands with my RP600M's. Attractive and well-built stand.
- Reply
- Inaccurate
- Thomas G on Oct 8, 2020
- Purchased on Jan 5, 2020
Probably I had 85th anniversary Y for girls they fit fine
- Reply
- Inaccurate
- Richard M on Oct 8, 2020
Vote for the best answer above!
They do not come with alternative feet, just the spikes, so I am engineering a solution.
- Reply
- Inaccurate
- Neil M on Feb 18, 2025
- Purchased on Jan 28, 2025
I would assume so, because we put it on porcelain tile.Enter
- Reply
- Inaccurate
- michele g on Jan 3, 2020
- Purchased on Nov 30, 2019
Vote for the best answer above!
Do these come with any cable management features?
A shopper
on Jan 29, 2025
BEST ANSWER: Hi, thank you for your question. Unfortubately, there's no cable management feature on this speaker stand.
- Reply
- Inaccurate
- Jhomar R Staff on Feb 6, 2025
BEST ANSWER: Hi, thank you for your question. Unfortubately, there's no cable management feature on this speaker stand.
- Reply
- Inaccurate
- Jhomar R Staff on Feb 6, 2025
I own these, but there are no cable management features really, I think the best option is to tape the wire to the back.
- Reply
- Inaccurate
- Gregory H on Feb 5, 2025
- Purchased on Aug 11, 2024
Vote for the best answer above!
Vote for the best answer above!
Ask about the material please!? Do i need to put dry sand?
A shopper
on Nov 17, 2019
BEST ANSWER: These wood posts are solid wood and cannot be filled with sand.
- Reply
- Inaccurate
- New User U Staff on Nov 18, 2019
BEST ANSWER: These wood posts are solid wood and cannot be filled with sand.
- Reply
- Inaccurate
- New User U Staff on Nov 18, 2019
Vote for the best answer above!
How thick is the steel plate holding the speaker? My bookshelf speakers have a unique bolt pattern underneath for mounting, can I easily drill holes in the plate?
A shopper
on Jan 19, 2020
BEST ANSWER: The top steel plate is high quality and durable, between 1-2/16" thick. You'll need a sharp steel bit and a either a drill press (best) or put some muscule down to drill through. Overall, the stand is very sturdy and holds my 13lb KEF speakers wonderfully. Hopefully you can remove the speaker bolts and allow speaker to sit comfortably on the stand. I do have a 2/16' rubber pad under the speaker to eliminate any vibration or slippage of speaker.
Hope this helps
Hope this helps
- Reply
- Inaccurate
- Gary E on Jan 19, 2020
BEST ANSWER: The top steel plate is high quality and durable, between 1-2/16" thick. You'll need a sharp steel bit and a either a drill press (best) or put some muscule down to drill through. Overall, the stand is very sturdy and holds my 13lb KEF speakers wonderfully. Hopefully you can remove the speaker bolts and allow speaker to sit comfortably on the stand. I do have a 2/16' rubber pad under the speaker to eliminate any vibration or slippage of speaker.
Hope this helps
Hope this helps
- Reply
- Inaccurate
- Gary E on Jan 19, 2020
Measures approx 1/16” should not be a problem to drill
- Reply
- Inaccurate
- Timothy S on Jan 20, 2020
- Purchased on Dec 4, 2019
Vote for the best answer above!
My speakers weigh 32 pounds each. Are these wood stands as stable and rigid as the metal stands?
New User U
on Nov 21, 2022
BEST ANSWER: I would imagine the footprint of the speaker would be relevant here, but these are extremely well build I have four children running around mine, never had a spill. I bought load-bearing Velcro straps to wrap my SVS Ultras to these, very stable on rented carpet without the stabilizers installed.
- Reply
- Inaccurate
- David H on Nov 21, 2022
BEST ANSWER: I would imagine the footprint of the speaker would be relevant here, but these are extremely well build I have four children running around mine, never had a spill. I bought load-bearing Velcro straps to wrap my SVS Ultras to these, very stable on rented carpet without the stabilizers installed.
- Reply
- Inaccurate
- David H on Nov 21, 2022
In a word, “yes”. But a hard bump up against your speakers could still cause a tip over.
- Reply
- Inaccurate
- Stephen H on Nov 21, 2022
Vote for the best answer above!
Will this accomodate kef ls50? Thanks
A shopper
on Aug 6, 2023
BEST ANSWER: I cant imagine why it wouldn't work. The KEFs have a foot print of approx 8"W x 11"D and weigh about 17lbs each. If you look at the stand's specifications at Monoprice's web site then compare the speaker specs from Crutchfield's web site, nothing obvious jumps out as far as I can see. The stand supposedly holds 50lbs so one of your 17 pound KEF speakers shouldn't be a problem.
Dude, I think you should just go for it. If you don't like it, just return it! What's the prob??? I LOVE mine.
Dude, I think you should just go for it. If you don't like it, just return it! What's the prob??? I LOVE mine.
- Reply
- Inaccurate
- V-Man on Aug 9, 2023
BEST ANSWER: I cant imagine why it wouldn't work. The KEFs have a foot print of approx 8"W x 11"D and weigh about 17lbs each. If you look at the stand's specifications at Monoprice's web site then compare the speaker specs from Crutchfield's web site, nothing obvious jumps out as far as I can see. The stand supposedly holds 50lbs so one of your 17 pound KEF speakers shouldn't be a problem.
Dude, I think you should just go for it. If you don't like it, just return it! What's the prob??? I LOVE mine.
Dude, I think you should just go for it. If you don't like it, just return it! What's the prob??? I LOVE mine.
- Reply
- Inaccurate
- V-Man on Aug 9, 2023
I don't see why not. They fit my Dynaudio Evoke 10's which are pretty close in size to the LS50.
- Reply
- Inaccurate
- C. Todd M on Aug 6, 2023
- Purchased on May 15, 2023
Vote for the best answer above!
Are you guys going to be posting specs and details on this item?
A shopper
on Oct 3, 2019
BEST ANSWER: Yes, content and specs will be added soon.
- Reply
- Inaccurate
- New User U Staff on Oct 4, 2019
BEST ANSWER: Yes, content and specs will be added soon.
- Reply
- Inaccurate
- New User U Staff on Oct 4, 2019
Vote for the best answer above!
What is the base and the speaker shelf made of?
A shopper
on Oct 4, 2019
Vote for the best answer above!
Max weight capacity?
A shopper
on Oct 4, 2019
Vote for the best answer above!
Do these arrive fully disassembled, or alternately, can these be disassembled down to isolate the posts themselves, to allow resurfacing/refinishing the wood posts? Thanks!
A shopper
on Jan 6, 2021
Vote for the best answer above!
Is the price shown for each or for a pair?
A shopper
on Jul 28, 2021
BEST ANSWER: Hello, this is for each speaker stand.
- Reply
- Inaccurate
- Angelica C. Staff on Jul 28, 2021
BEST ANSWER: Hello, this is for each speaker stand.
- Reply
- Inaccurate
- Angelica C. Staff on Jul 28, 2021
Vote for the best answer above!
Will the Monoprice Monolith THX 365T mini-tower work with this stand? You'd think with the Monolith name it would.
David W
on Nov 13, 2021
BEST ANSWER: You can measure. .. using the specs.. it might work. I am using for a center channel
Horizontal speaker..
Horizontal speaker..
- Reply
- Inaccurate
- Robert W on Nov 14, 2021
- Purchased on Jul 25, 2021
BEST ANSWER: You can measure. .. using the specs.. it might work. I am using for a center channel
Horizontal speaker..
Horizontal speaker..
- Reply
- Inaccurate
- Robert W on Nov 14, 2021
- Purchased on Jul 25, 2021
Vote for the best answer above!
My speakers are 32 pounds, 20" H x 8" W x 12-1/2" D. Is it possible to have a larger top plate to more fully support the speakers?
New User U
on Nov 21, 2022
BEST ANSWER: The included plate will support the speakers just fine.
- Reply
- Inaccurate
- New User U Staff on Nov 21, 2022
BEST ANSWER: The included plate will support the speakers just fine.
- Reply
- Inaccurate
- New User U Staff on Nov 21, 2022
Vote for the best answer above!
Can the wood be cut to customize the length?
A shopper
on May 18, 2024
Vote for the best answer above!
Are there rubber feet for the base to use on wood floor?
A shopper
on Oct 22, 2020
What is the thread size of the adustible spikes?
New User U
on Dec 16, 2021
How tall are these 24" stands with the carpet spikes installed? IOW, how much height do the spikes add?
A shopper
on Mar 29, 2022
What diameter are the threaded part of the spikes? I want to buy some aftermarket pads for them.
A shopper
on Dec 24, 2022
Any chance of getting walnut?
JEFFERY H
on Apr 9, 2023
Questions For Similar Products
Reviews
4.8 / 5.0
40 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
33
7
0
0
0
Rated 5 out of 5
Highly recommend these speaker stands. Outstanding quality for the price
Easy to assemble and packed very well for shipping. Look like they cost much more than they actually do.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Feedback
Pretty cool! Would like it if they had alternative feet to the spikes that I can't use on my hardwood.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Beautiful, sturdy stand.
Beautiful, sturdy stand.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Nice looking, sturdy and easy to assemble
Nice looking, sturdy and easy to assemble
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Well suited for the needs
Very happy with product. Sturdy, well designed and built. Cherry color of wood tied in very well with our room decor. My only gripe might be the base plate for folks with hard wood floors. Would have been nice if there was a flatter bottom for one to put a cushion or sliders on. I like to pull my speakers out into a more preferred listening position during critical listening. Anyway, I fabricated some bolt on cushion sliders that worked very well.
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
July 2, 2024
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Very nice
Excellent, they fit perfectly and they are rock solid.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Response from Monoprice
I'm glad to hear that you're happy with your new Monoprice Speaker Stand! We appreciate your positive feedback.
October 5, 2023
Eli S
Rated 5 out of 5
Easy Assembly / Absolutely Beautiful
Stands can look light or dark depending on the area lighting. Very sturdy and decent top plate for medium sized speakers. Super Deal with discount and BIG30 Coupon, Highly Recommended.
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Sturdy Pillars
These stands are sturdy and weighty. Perfect for my needs.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Pleasantly surprised!
They look great, are heavy and sturdy. I really like them for the money!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products