Workstream by Monoprice Slat Desk System, Vertical Column
Product # 33089
UPC # 889028082454
$39.99
*Affirm is not available for business or international orders
This item has been discontinued
Qty: 1
$39.99
Qty: 2-9
$39.99
Qty: 10-19
$39.99
Qty: 20-49
$39.99
Qty: 50+
$39.99
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 14 questions
Browse 14 questions
and 18 answers
Could this hold a 27" 5K Retina iMac plus 2 10-16 lb monitors?
andre s
on Jul 2, 2019
Workstream by Monoprice Slat Desk System, Vertical Column
Workstream by Monoprice Slat Desk System Starter Set, Vertical Columns and Horizontal Slats
Workstream by Monoprice Slat Desk System, Horizontal Rail
BEST ANSWER: Yes, this would work as long as your iMac has VESA mounting and the overall dimensions for the mounting points fit. You might want to consider adding product 33093 so you can have more range to position your side monitors. Hope this helps, thanks.
- Reply
- Inaccurate
- Irv S Staff on Jul 2, 2019
BEST ANSWER: Yes, this would work as long as your iMac has VESA mounting and the overall dimensions for the mounting points fit. You might want to consider adding product 33093 so you can have more range to position your side monitors. Hope this helps, thanks.
- Reply
- Inaccurate
- Irv S Staff on Jul 2, 2019
Yes, the posts and cross-rail are very sturdy and should be able to handle the weight. Width is more likely to be your limiting factor, as well as what Mounts you choose to use. I am currently using a 34" Dell U3415w Ultra-wide Curved Monitor attached to the Tilt and Swivel Monitor Mid-Mount. It is very sturdy but it should be noted that the mount is only rated at Max 17.6 lbs per display. It also sticks out a decent amount from the slat bar (~5") which creates a higher moment arm; while my monitor feels secure, I would hesitate to hang anything heavier than 18-19 lbs on the Tilt and Swivel Mid-Mount. The closer you can mount the monitors to the face of the slat bar, the sturdier it will be.
Workstream by Monoprice Slat Desk System, Tilt and Swivel Monitor Mid-Mount
- Reply
- Inaccurate
- John N on Jul 2, 2019
- Purchased on Dec 17, 2018
Yes. This thing is rock solid. I'd be more concerned with the table/desk surface you're mounting it to. Mine is holding two 23" displays, a thunderbolt 3 dock, and some other accessories, and I wouldn't hesitate to add weight.
- Reply
- Inaccurate
- Tyler J. L on Jul 2, 2019
- Purchased on Mar 26, 2019
Weight won’t be an issue. These things are heavy duty. The only question is if you’ll have enough real estate to hold all three. I have two 27” monitors and can’t add a 3rd.
- Reply
- Inaccurate
- Rick A on Jul 2, 2019
- Purchased on Feb 18, 2019
I have two 27:" Lg monitors on mine, its great
- Reply
- Inaccurate
- Thomas W on Jul 2, 2019
- Purchased on Feb 8, 2019
Vote for the best answer above!
First, this looks like a great solution to organize my sit-stand desk. But second, I have some questions.
It looks like if I had a wide enough desk I could add another horizontal segment and another vertical mount? Is that correct? Can that also be done at a 90-degree angle?
It looks like if I had a wide enough desk I could add another horizontal segment and another vertical mount? Is that correct? Can that also be done at a 90-degree angle?
Stuart M
on Nov 18, 2018
Workstream by Monoprice Slat Desk System, Vertical Column
Workstream by Monoprice Slat Desk System Starter Set, Vertical Columns and Horizontal Slats
Workstream by Monoprice Slat Desk System, Horizontal Rail
BEST ANSWER: Yes, you can add another support and cross beam. Also, the supports are not squares, they are rectangles, but the slots on the short side (where the cross bar is mounted in the product images) do appear to match the slots on the long side, so it may work at a 90 degree angle.
- Reply
- Inaccurate
- Cam E on Nov 18, 2018
- Purchased on Aug 23, 2018
BEST ANSWER: Yes, you can add another support and cross beam. Also, the supports are not squares, they are rectangles, but the slots on the short side (where the cross bar is mounted in the product images) do appear to match the slots on the long side, so it may work at a 90 degree angle.
- Reply
- Inaccurate
- Cam E on Nov 18, 2018
- Purchased on Aug 23, 2018
No reason that wouldn't work. There are identical slots on all four sides of the uprights.
- Reply
- Inaccurate
- Nathan J on Nov 19, 2018
- Purchased on Sep 20, 2018
Yes, and yes. The verticals can be connected on the front slots to extend out at a 90.
- Reply
- Inaccurate
- Edward R on Nov 18, 2018
- Purchased on Oct 31, 2018
Vote for the best answer above!
Are there vertical extensions for this system so I can have another horizontal rail above the first one?
Michael T
on Dec 30, 2018
Workstream by Monoprice Slat Desk System, Vertical Column
Workstream by Monoprice Slat Desk System Starter Set, Vertical Columns and Horizontal Slats
BEST ANSWER: We don't have this option and would recommend against using extensions for the main structural parts. It might be possible to spec longer lengths of the aluminum extrusions, but that would require custom orders and there would be minimum order quantities involved. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Dec 31, 2018
BEST ANSWER: We don't have this option and would recommend against using extensions for the main structural parts. It might be possible to spec longer lengths of the aluminum extrusions, but that would require custom orders and there would be minimum order quantities involved. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Dec 31, 2018
It may be possible to DIY replace the aluminum extrusion with a longer one. It appears to be a standard Series 30 T-Slot framing extrusion.
- Reply(1)
- Inaccurate
- New User U on Jan 2, 2020
On closer inspection I see it might me a custom extrusion.
- Reply
- New User U on Jan 2, 2020
Vote for the best answer above!
How tall is this?
Gene C
on Jun 28, 2018
BEST ANSWER: Hi, the Vertical Column is a little over 16" tall.
- Reply
- Inaccurate
- Irv S Staff on Jun 28, 2018
BEST ANSWER: Hi, the Vertical Column is a little over 16" tall.
- Reply
- Inaccurate
- Irv S Staff on Jun 28, 2018
Vote for the best answer above!
There's no information limits for this. What are it's dimensions? What are it's restrictions?
Eli M
on Jun 28, 2018
BEST ANSWER: Hi, we are working on adding this information to the product page, but in the meantime, dimensions for the Vertical Column are 2" x 1.75" x 16". The base of the column that sits on the desk is around 5x3", with the clamp able to open up to 2".
- Reply(1)
- Inaccurate
- Irv S Staff on Jun 28, 2018
Hi, for your other question, we recommend this Vertical Column for loads up to 44 lbs. If used with the Horizontal Rail and another column, the system is recommended for up to 70 lbs. The mounts and accessories are recommended for loads up to 17 lbs each, 8 lbs for the pen holder. Hope this helps for now, we'll work on adding this info to the product pages. Thanks.
BEST ANSWER: Hi, we are working on adding this information to the product page, but in the meantime, dimensions for the Vertical Column are 2" x 1.75" x 16". The base of the column that sits on the desk is around 5x3", with the clamp able to open up to 2".
- Reply(1)
- Inaccurate
- Irv S Staff on Jun 28, 2018
Hi, for your other question, we recommend this Vertical Column for loads up to 44 lbs. If used with the Horizontal Rail and another column, the system is recommended for up to 70 lbs. The mounts and accessories are recommended for loads up to 17 lbs each, 8 lbs for the pen holder. Hope this helps for now, we'll work on adding this info to the product pages. Thanks.
Vote for the best answer above!
Can two monitor mounts be put onto a single vertical column? If so what is the weight/monitor size limit?
Eric M
on Jul 14, 2018
Workstream by Monoprice Slat Desk System, Vertical Column
Workstream by Monoprice Slat Desk System, Fully Adjustable Gas Spring Monitor End-Mount
BEST ANSWER: Hi, yes it is possible to use two (or even more if within space and weight constraints) monitor mounts on one vertical column. The vertical column is recommended for loads up to 44 lbs. This monitor mount is recommend for monitors up to 17.5 lbs. Recommended maximum screen size is 27", you can go bigger if within weight recommendations, but you might lose some adjustment range when monitors are bigger. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Jul 25, 2018
BEST ANSWER: Hi, yes it is possible to use two (or even more if within space and weight constraints) monitor mounts on one vertical column. The vertical column is recommended for loads up to 44 lbs. This monitor mount is recommend for monitors up to 17.5 lbs. Recommended maximum screen size is 27", you can go bigger if within weight recommendations, but you might lose some adjustment range when monitors are bigger. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Jul 25, 2018
Vote for the best answer above!
Can two of these vertical columns be joined together to make it double in height?
Brian M
on Aug 21, 2018
BEST ANSWER: Hi, these products were not designed to be joined that way so there is no easy or recommended way to be able to do it.
- Reply
- Inaccurate
- Irv S Staff on Sep 25, 2018
BEST ANSWER: Hi, these products were not designed to be joined that way so there is no easy or recommended way to be able to do it.
- Reply
- Inaccurate
- Irv S Staff on Sep 25, 2018
Vote for the best answer above!
what is the height of the vertical column?
jazz w
on Aug 30, 2019
BEST ANSWER: Hi, the vertical column extends approximately 16" above the desk surface. Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Aug 30, 2019
BEST ANSWER: Hi, the vertical column extends approximately 16" above the desk surface. Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Aug 30, 2019
Vote for the best answer above!
I'd love to have a pair of these vertical columns approximately twice as long, so that I can mount a couple of things above monitor height. Does anyone know what the 'profile' of these rails are (a picture of the top without the cap would be perfect)? I'm thinking that I could get this for the hardware and buy a stock piece of extruded aluminum rail to use.
New User U
on Sep 15, 2019
Workstream by Monoprice Slat Desk System, Vertical Column
Workstream by Monoprice Slat Desk System Starter Set, Vertical Columns and Horizontal Slats
BEST ANSWER: Hi, the columns are 53mm x 43mm. Here's a drawing for the cross section. Thanks. https://imgur.com/gallery/Rus4aU6
- Reply(1)
- Inaccurate
- Irv S Staff on Sep 16, 2019
Thanks! For the life of me I couldn’t find another provider for that specific extrusion shape - but I don’t think I’ll need to. It looks like I can add the additional pieces I want (microphone, camera ams, shelf brackets, etc) with 40mm t-slot hardware
- Reply
- New User U on Sep 16, 2019
BEST ANSWER: Hi, the columns are 53mm x 43mm. Here's a drawing for the cross section. Thanks. https://imgur.com/gallery/Rus4aU6
- Reply(1)
- Inaccurate
- Irv S Staff on Sep 16, 2019
Thanks! For the life of me I couldn’t find another provider for that specific extrusion shape - but I don’t think I’ll need to. It looks like I can add the additional pieces I want (microphone, camera ams, shelf brackets, etc) with 40mm t-slot hardware
- Reply
- New User U on Sep 16, 2019
Vote for the best answer above!
Isn't it cheaper to buy 2x Monoprice Slat Desk System, Vertical Column (PID=33089) and 1x Monoprice Slat Desk System, Horizontal Rail (PID=33090) then to purchase this starter set?
A shopper
on Jun 28, 2018
Workstream by Monoprice Slat Desk System, Vertical Column
Workstream by Monoprice Slat Desk System Starter Set, Vertical Columns and Horizontal Slats
Workstream by Monoprice Slat Desk System, Horizontal Rail
Will I be able to install two horizontal rails to the vertical columns? I want the ability to mount four 27" monitors (2x2).
Nelson R
on Jan 19, 2020
Workstream by Monoprice Slat Desk System, Vertical Column
Workstream by Monoprice Slat Desk System, Horizontal Rail
has the horizontal slat been discontinued?
A shopper
on Apr 26, 2020
Hello, I recently purchased two of these vertical columns and was looking to buy a horizontal bar to fit the length of my desk. Would normal aluminum extrusion work with these columns and if so, what would be the best series to pair with this? 40/40 or 20/20?
Thanks.
Thanks.
New User U
on Oct 14, 2021
Are the slat panels/rails that fit onto the poles available to buy anywhere?
A shopper
on May 20, 2022
Questions For Similar Products
Reviews
5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Rated 5 out of 5
Deeper & Larger C-Clamp
This c-clamp is larger and deeper than many other c-clamps.
I have a desk that has a beveled edge, and this clamp goes deeper (pass the beveled edge) to be able to have a full grip.
The bigger clamp and two grips really help with stability.
It's hard to find this among other brands and still be affordable. Thank you Monoprice!
I have a desk that has a beveled edge, and this clamp goes deeper (pass the beveled edge) to be able to have a full grip.
The bigger clamp and two grips really help with stability.
It's hard to find this among other brands and still be affordable. Thank you Monoprice!
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
love the system
It is a great system. I attached the horizontal bars to the vertical posts.
- Was this review helpful? Yes (2) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (1)
- Flag as Inappropriate
Reviews for Similar Products