Workstream by Monoprice Triple Monitor Gas Spring Mount for up to 32in Screens, Fully Adjustable Center Mount
Product # 29407
UPC # 889028069141
$135.99
$159.99
Save $24.00 (15%)
*Affirm is not available for business or international orders
- FREE STANDARD US SHIPPING
- Eligible for Coupon(s) DAD10 , DAD50
Qty: 1
$135.99
$159.99
Qty: 2-9
$135.99
$158.39
Qty: 10-19
$135.99
$156.79
Qty: 20-49
$135.99
$151.99
Qty: 50+
$135.99
$150.39
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 153 questions
Browse 153 questions
and 181 answers
Can this model be mounted to the wall? It only states that it has a desk clamp
A shopper
on Dec 24, 2018
BEST ANSWER: No, this mount offers tension (as pictured on site) and /or dual bolt (which was a surprise) that would go through the surface of the desk and then secured with a plate, washer, lock washer and nut on the other side.
- Reply
- Inaccurate
- Robert T on Feb 18, 2019
- Purchased on Jan 31, 2019
BEST ANSWER: No, this mount offers tension (as pictured on site) and /or dual bolt (which was a surprise) that would go through the surface of the desk and then secured with a plate, washer, lock washer and nut on the other side.
- Reply
- Inaccurate
- Robert T on Feb 18, 2019
- Purchased on Jan 31, 2019
It only comes with clamps to be mounted to a desk or other flat surface.
- Reply
- Inaccurate
- Justin L on Dec 24, 2018
- Purchased on Aug 27, 2018
The design of this mount wouldn't allow for wall mounting.
- Reply
- Inaccurate
- Jason T on Dec 24, 2018
- Purchased on Apr 17, 2018
No. It only comes with a desk clamp.
- Reply
- Inaccurate
- John H on Dec 24, 2018
- Purchased on Apr 4, 2018
Vote for the best answer above!
Do they make a mount that can physically bolt to the desk instead of a clamp?
A shopper
on Sep 19, 2020
BEST ANSWER: Yes, it does have through-hole mounting. Refer to figure 1b-1 -3 in the pdf manual.
I have mine clamped to my deck holding 2 34" ultra wides stacked on top of each other. It is solid but I bet would be really solid if I mounted with through holes
Cheers
I have mine clamped to my deck holding 2 34" ultra wides stacked on top of each other. It is solid but I bet would be really solid if I mounted with through holes
Cheers
- Reply
- Inaccurate
- Zachary R on Sep 19, 2020
- Purchased on Mar 25, 2020
BEST ANSWER: Yes, it does have through-hole mounting. Refer to figure 1b-1 -3 in the pdf manual.
I have mine clamped to my deck holding 2 34" ultra wides stacked on top of each other. It is solid but I bet would be really solid if I mounted with through holes
Cheers
I have mine clamped to my deck holding 2 34" ultra wides stacked on top of each other. It is solid but I bet would be really solid if I mounted with through holes
Cheers
- Reply
- Inaccurate
- Zachary R on Sep 19, 2020
- Purchased on Mar 25, 2020
Yes, they do. This mount actually includes the kit to physically bolt it to the desk. The instructions will show you both ways of mounting this monitor stand.
- Reply
- Inaccurate
- Kyle S on Sep 19, 2020
- Purchased on Mar 24, 2020
Yes you can bolt it or clamp it to the desk
- Reply
- Inaccurate
- KEITH H on Sep 19, 2020
- Purchased on Dec 31, 2019
Vote for the best answer above!
Can three 24" monitors be stacked vertically in one line (landscape orientation) ?
A shopper
on Feb 17, 2019
BEST ANSWER: No that wouldn't be possible. The center bar, while tall at around 24" would provide you enough vertical reach to accommodate a monitor underneath and below, regardless of size
- Reply
- Inaccurate
- Robert T on Feb 18, 2019
- Purchased on Jan 31, 2019
BEST ANSWER: No that wouldn't be possible. The center bar, while tall at around 24" would provide you enough vertical reach to accommodate a monitor underneath and below, regardless of size
- Reply
- Inaccurate
- Robert T on Feb 18, 2019
- Purchased on Jan 31, 2019
I doubt it. I don't think there's enough vertical movement to do that. The two monitor version of this could probably stack two monitors.
- Reply
- Inaccurate
- Mark J on Feb 17, 2019
- Purchased on Dec 30, 2018
No. I have mine in an L shape, and that was... Less than easy.
- Reply
- Inaccurate
- Brian S on Feb 17, 2019
- Purchased on Jan 5, 2019
Vote for the best answer above!
Can the center pole be removed?
A shopper
on May 27, 2020
BEST ANSWER: I don't believe you can remove the center pole, although you can remove the mount on the center pole, if you only wanted to utilize two monitors.
- Reply
- Inaccurate
- Zach S on May 28, 2020
- Purchased on Feb 26, 2020
BEST ANSWER: I don't believe you can remove the center pole, although you can remove the mount on the center pole, if you only wanted to utilize two monitors.
- Reply
- Inaccurate
- Zach S on May 28, 2020
- Purchased on Feb 26, 2020
Don't think so. the two arms are supported by the center pole.
- Reply
- Inaccurate
- AKASH P on May 27, 2020
- Purchased on Jun 16, 2019
Vote for the best answer above!
how deep is the clamp I only have about 2 inch's of space on underside of desk fore its hits a privacy panel?
Bryan B
on Apr 7, 2021
BEST ANSWER: If you do not have enough overhang to use the clamps, you can use the included through-hole mounting hardware by drilling two 1/4" holes on the desktop (or using grommet holes if the desk has them).
- Reply
- Inaccurate
- Irv S Staff on Apr 16, 2021
BEST ANSWER: If you do not have enough overhang to use the clamps, you can use the included through-hole mounting hardware by drilling two 1/4" holes on the desktop (or using grommet holes if the desk has them).
- Reply
- Inaccurate
- Irv S Staff on Apr 16, 2021
That might not be enough. I have not measured, but I would estimate it to be closer to 4"
- Reply
- Inaccurate
- Jeff P on Apr 7, 2021
- Purchased on May 30, 2020
Vote for the best answer above!
How far forward can 3 27” monitors in this position \ _ / be moved from the back of the desk I need them to touch the edge closets to me also can’t have any gaps between the 3?
A shopper
on Nov 24, 2021
BEST ANSWER: I'm assuming you are in landscape for this, and it will vary a bit depending on the exact width and depth of the monitors. It also depends on the vertical angle of the arms (closer to flat gives more reach). But my stab at calculating is: side arms are about 30" if fully extended. Assuming 25" left-right between them all for 3 touching 27" monitors, a bit of trig gives about 16.5" forward as the 3rd side of the triangle. The clamp mount gives you another 2" forward. And the actual mount on the end of each arm plus the thickness of the monitor is another 5". So, grand total, I'd estimate you can get the front faces of these 23.5" from the back edge of the desk, max.
- Reply
- Inaccurate
- Thomas S on Nov 24, 2021
- Purchased on Jan 13, 2021
BEST ANSWER: I'm assuming you are in landscape for this, and it will vary a bit depending on the exact width and depth of the monitors. It also depends on the vertical angle of the arms (closer to flat gives more reach). But my stab at calculating is: side arms are about 30" if fully extended. Assuming 25" left-right between them all for 3 touching 27" monitors, a bit of trig gives about 16.5" forward as the 3rd side of the triangle. The clamp mount gives you another 2" forward. And the actual mount on the end of each arm plus the thickness of the monitor is another 5". So, grand total, I'd estimate you can get the front faces of these 23.5" from the back edge of the desk, max.
- Reply
- Inaccurate
- Thomas S on Nov 24, 2021
- Purchased on Jan 13, 2021
I use it with 3 28" it is a bit small for them but works, I think with 27" you will have more U shape than I have. The arm holds the monitor close enough not to have a gap. I have a tiny gap but like I said I use it with 28".
- Reply
- Inaccurate
- Bela E on Dec 15, 2021
- Purchased on Apr 29, 2021
Vote for the best answer above!
Is there a way to tighten the strength of the gas shock, I have one monitor that begins to sag and then ends up all the way down on my desk. All 3 monitors are the same, but only one has this issue?
Chuck R
on Mar 16, 2018
BEST ANSWER: Hi, there is an adjustment screw at the base of the gas-spring arm section. Use the hex wrench and turn towards the "+" symbol until you get the right counter-balance force. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Apr 6, 2018
BEST ANSWER: Hi, there is an adjustment screw at the base of the gas-spring arm section. Use the hex wrench and turn towards the "+" symbol until you get the right counter-balance force. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Apr 6, 2018
Vote for the best answer above!
What is the diameter of the central pole?
New User U
on Apr 5, 2018
BEST ANSWER: Hi, it is 35mm or around 1.38 inches. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Apr 6, 2018
BEST ANSWER: Hi, it is 35mm or around 1.38 inches. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Apr 6, 2018
Vote for the best answer above!
I have 6 monitors, I want to keep 3 on the desk and use this to put 3 above them. Max height of the monitors on the desk is 17.5" the 3 monitors I want to place above them are all 27" monitors. Will this work ?
Doug R
on Apr 19, 2018
BEST ANSWER: Hi, this could work for the height clearance that you need. The base of the monitor arms can be positioned higher on the center pole to get the extra height. It may affect stability a bit if your desk is shaky since the monitors will be higher up, so make sure your desk is sturdy and that this product is clamped or mounted securely. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Jun 11, 2018
BEST ANSWER: Hi, this could work for the height clearance that you need. The base of the monitor arms can be positioned higher on the center pole to get the extra height. It may affect stability a bit if your desk is shaky since the monitors will be higher up, so make sure your desk is sturdy and that this product is clamped or mounted securely. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Jun 11, 2018
Vote for the best answer above!
I need to have the monitors closer to me than most people. How far forward can three 27" monitors come from the back of the desk? I'd have them in a \_/ formation rather than flat _ _ _ .
David H
on Jun 21, 2018
BEST ANSWER: I have this configured with three 27" monitors (small bezel) and they can only handle about a ~160 degree angle from the center monitor. I have drilled holes (x2) in the desk to accommodate putting the stand further forward. The center monitor can only handle about 10" forward of the stand. If this were configured to be connected to the back of the desk, it would definitely be too far away for my preference.
- Reply(1)
- Inaccurate
- Jason T on Jun 21, 2018
- Purchased on Apr 17, 2018
BEST ANSWER: I have this configured with three 27" monitors (small bezel) and they can only handle about a ~160 degree angle from the center monitor. I have drilled holes (x2) in the desk to accommodate putting the stand further forward. The center monitor can only handle about 10" forward of the stand. If this were configured to be connected to the back of the desk, it would definitely be too far away for my preference.
- Reply(1)
- Inaccurate
- Jason T on Jun 21, 2018
- Purchased on Apr 17, 2018
Vote for the best answer above!
What are yalls thoughts on using two of these at the same time for a 6 monitor setup? 3 on bottom, 3 on top? Both mounted to the desk side by side? Monitor size would be 24”
Tuan L
on Aug 14, 2018
BEST ANSWER: Thank you for your question.
That would be possible as long as you have enough space and the desk would support the weight.
That would be possible as long as you have enough space and the desk would support the weight.
- Reply
- Inaccurate
- Tyler C Staff on Jul 30, 2019
BEST ANSWER: Thank you for your question.
That would be possible as long as you have enough space and the desk would support the weight.
That would be possible as long as you have enough space and the desk would support the weight.
- Reply
- Inaccurate
- Tyler C Staff on Jul 30, 2019
Vote for the best answer above!
Can this be mounted using the grommet/cable management holes in a desk? If so, what size holes will work?
A shopper
on Nov 5, 2018
BEST ANSWER: Hi, this product does include hardware for through hole mounting. The best way to do it is to drill 2x 1/2" holes for the 2 bolts to maximize the mounting surface area. Or if using only 1 grommet hole, the 2 bolts could fit through a 70-100 mm grommet hole. Just make sure that the desk material is not crumbly or hollow. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Nov 5, 2018
BEST ANSWER: Hi, this product does include hardware for through hole mounting. The best way to do it is to drill 2x 1/2" holes for the 2 bolts to maximize the mounting surface area. Or if using only 1 grommet hole, the 2 bolts could fit through a 70-100 mm grommet hole. Just make sure that the desk material is not crumbly or hollow. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Nov 5, 2018
Vote for the best answer above!
What are the measurements of the clamp itself? I don't see it listed on the diagram, and I mainly care about the width I need for the clamps. I only have about 3.5 inches.
Jacob M
on Nov 23, 2018
BEST ANSWER: Hi, the clamp itself has a 5.5" wide x 5" deep base that sits above your desk, and needs at least 3.5" under your desk to clamp on. Having a bit more space would make it easier to tighten the clamp screws. This mount also comes with through-hole mounting hardware for applications where an edge clamp might not work. Hope this helps, thanks.
- Reply
- Inaccurate
- Irv S Staff on Nov 26, 2018
BEST ANSWER: Hi, the clamp itself has a 5.5" wide x 5" deep base that sits above your desk, and needs at least 3.5" under your desk to clamp on. Having a bit more space would make it easier to tighten the clamp screws. This mount also comes with through-hole mounting hardware for applications where an edge clamp might not work. Hope this helps, thanks.
- Reply
- Inaccurate
- Irv S Staff on Nov 26, 2018
Vote for the best answer above!
Can the arms be adjusted in such a way to create a pyramid configuration with one monitor on top and 2 on the bottom?
A shopper
on Dec 8, 2018
BEST ANSWER: Hi, it's possible, this monitor arm allows for the center of middle monitor vesa mount to be set as high as 33" above the desk. That should provide enough clearance for monitors to be positioned below it, but please measure the monitors you plan to use and consider that your range of adjustments could get limited with that setup. Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Dec 10, 2018
BEST ANSWER: Hi, it's possible, this monitor arm allows for the center of middle monitor vesa mount to be set as high as 33" above the desk. That should provide enough clearance for monitors to be positioned below it, but please measure the monitors you plan to use and consider that your range of adjustments could get limited with that setup. Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Dec 10, 2018
Vote for the best answer above!
Can the fixed middle monitor center mount be setup above the two arms (opposite of what's pictured)?
Michael T
on Dec 12, 2018
Workstream by Monoprice Triple Monitor Gas Spring Mount for up to 32in Screens, Fully Adjustable Center Mount
Workstream by Monoprice Triple Monitor Gas Spring Mount for up to 32" Screens, Locking Center Mount
BEST ANSWER: Hi, yes this is possible. But we recommend the pictured orientation to put the center of gravity closer to the base. Switching them works but might be a bit shakier if that makes sense. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Dec 14, 2018
BEST ANSWER: Hi, yes this is possible. But we recommend the pictured orientation to put the center of gravity closer to the base. Switching them works but might be a bit shakier if that makes sense. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Dec 14, 2018
Vote for the best answer above!
It would seem you can adjust the arm weight and the tilt tension according to the user manual. Can you adjust the rotation tension?
Christopher P
on Jan 4, 2019
BEST ANSWER: Hi, although there are hex bolts that attach the rotating joints that could affect rotation tightness, they are not really meant to be adjustable. As such, they are not as easy to adjust as the lift and tilt adjustments and might work more for loosening the rotating joints and not so much for tightening further. Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Jan 7, 2019
BEST ANSWER: Hi, although there are hex bolts that attach the rotating joints that could affect rotation tightness, they are not really meant to be adjustable. As such, they are not as easy to adjust as the lift and tilt adjustments and might work more for loosening the rotating joints and not so much for tightening further. Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Jan 7, 2019
Vote for the best answer above!
Bummer that it doesn’t come with the electronic parts (but price is still great!). How do we go about purchasing the extra module for the USB charge station on the mounting base?
SV
on Apr 24, 2019
BEST ANSWER: Hi, we skipped it for this version to keep prices as low as possible. It's possible to customize them for an OEM order if you have the volume. Or let me know how many pieces you were thinking of and I can see if it would be possible to get an accessory or spare part setup on the website. Thanks.
- Reply(1)
- Inaccurate
- Irv S Staff on Apr 26, 2019
BEST ANSWER: Hi, we skipped it for this version to keep prices as low as possible. It's possible to customize them for an OEM order if you have the volume. Or let me know how many pieces you were thinking of and I can see if it would be possible to get an accessory or spare part setup on the website. Thanks.
- Reply(1)
- Inaccurate
- Irv S Staff on Apr 26, 2019
Vote for the best answer above!
Is this unit compatible with the Varidesk ProPlus 36?
A shopper
on Apr 29, 2019
BEST ANSWER: Hi, this might work with your desk but you would need to check a few things:
1. Check the weight capacity of your desk. This mount will add approximately 25lbs. It might require the user to exert more effort to lift your desk once you have this mount plus three monitors.
2. This mount needs 3.5 inches clearance at the back of the desk so the clamps could be tightened on a flat surface. Please check that there are no protruding parts or frame material that might prevent the clamp from attaching firmly.
3. Alternatively, if there is no clearance at the back of your desk, you could consider drilling a couple of 1/4" through holes to mount this product.
Hope this helps.
1. Check the weight capacity of your desk. This mount will add approximately 25lbs. It might require the user to exert more effort to lift your desk once you have this mount plus three monitors.
2. This mount needs 3.5 inches clearance at the back of the desk so the clamps could be tightened on a flat surface. Please check that there are no protruding parts or frame material that might prevent the clamp from attaching firmly.
3. Alternatively, if there is no clearance at the back of your desk, you could consider drilling a couple of 1/4" through holes to mount this product.
Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Apr 30, 2019
BEST ANSWER: Hi, this might work with your desk but you would need to check a few things:
1. Check the weight capacity of your desk. This mount will add approximately 25lbs. It might require the user to exert more effort to lift your desk once you have this mount plus three monitors.
2. This mount needs 3.5 inches clearance at the back of the desk so the clamps could be tightened on a flat surface. Please check that there are no protruding parts or frame material that might prevent the clamp from attaching firmly.
3. Alternatively, if there is no clearance at the back of your desk, you could consider drilling a couple of 1/4" through holes to mount this product.
Hope this helps.
1. Check the weight capacity of your desk. This mount will add approximately 25lbs. It might require the user to exert more effort to lift your desk once you have this mount plus three monitors.
2. This mount needs 3.5 inches clearance at the back of the desk so the clamps could be tightened on a flat surface. Please check that there are no protruding parts or frame material that might prevent the clamp from attaching firmly.
3. Alternatively, if there is no clearance at the back of your desk, you could consider drilling a couple of 1/4" through holes to mount this product.
Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Apr 30, 2019
Vote for the best answer above!
will this work for two samsung c32f397 curved monitors? I want to flush them side by side. I will eventually add a 3rd monitor above the two.
A shopper
on May 26, 2019
BEST ANSWER: While the size in that setup would likely not be an issue, it doesn't look like that model has vesa mounting holes. There's workarounds with vesa mount kits to adapt non-vesa monitors but with the way they hold the monitor would ruin the flush-ness with the top monitor imo.
- Reply
- Inaccurate
- Aaron J on May 26, 2019
- Purchased on May 6, 2019
BEST ANSWER: While the size in that setup would likely not be an issue, it doesn't look like that model has vesa mounting holes. There's workarounds with vesa mount kits to adapt non-vesa monitors but with the way they hold the monitor would ruin the flush-ness with the top monitor imo.
- Reply
- Inaccurate
- Aaron J on May 26, 2019
- Purchased on May 6, 2019
Vote for the best answer above!
What is the minimum height off the desk that the center of the middle and side VESA mounts can be lowered to?
New User U
on Jul 9, 2019
BEST ANSWER: Hi, the center of the VESA mounts could be lowered to approximately 6 inches above the the desk surface. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Jul 10, 2019
BEST ANSWER: Hi, the center of the VESA mounts could be lowered to approximately 6 inches above the the desk surface. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Jul 10, 2019
Vote for the best answer above!
I have 3 inches under the desk (rather than 3.5), then a piece of wood is in the way. Is this likely to work with the stand sticking out 1/2 inch out the back. Has anyone tried this?
Simon R
on Oct 16, 2019
BEST ANSWER: Hi, it could work but we recommend against it. Although it's a small difference, it reduces the clamped area and positions the vertical pole closer to the back edge. Given the weight of the stand, monitors, and the possibility that the monitors could be positioned forwards and therefore exert a levered force, it might not be good to reduce the base support area.
A better and more solid alternative would be use through-hole mounting if you're able to drill 2x 1/4" holes on your desktop. Hope this helps.
A better and more solid alternative would be use through-hole mounting if you're able to drill 2x 1/4" holes on your desktop. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Oct 16, 2019
BEST ANSWER: Hi, it could work but we recommend against it. Although it's a small difference, it reduces the clamped area and positions the vertical pole closer to the back edge. Given the weight of the stand, monitors, and the possibility that the monitors could be positioned forwards and therefore exert a levered force, it might not be good to reduce the base support area.
A better and more solid alternative would be use through-hole mounting if you're able to drill 2x 1/4" holes on your desktop. Hope this helps.
A better and more solid alternative would be use through-hole mounting if you're able to drill 2x 1/4" holes on your desktop. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Oct 16, 2019
Vote for the best answer above!
Can the center, pole mounted, adjustable arm be purchased separately?
Eric D
on Oct 18, 2019
BEST ANSWER: I also would like to know if this can be purchased afterwards.
- Reply
- Inaccurate
- Jeffery S on Oct 18, 2019
BEST ANSWER: I also would like to know if this can be purchased afterwards.
- Reply
- Inaccurate
- Jeffery S on Oct 18, 2019
Vote for the best answer above!
I have a 32", and 2 27" monitors currently. I'm curious if I'd be able to mount the 32" in the center and have one of the 27"s "stacked" above with the other vertically mounted on the side? Thanks.
A shopper
on Dec 15, 2019
BEST ANSWER: Thank you for your question.
We can only guarantee that you could achieve the screen configurations that are shown on the product page.
We can only guarantee that you could achieve the screen configurations that are shown on the product page.
- Reply
- Inaccurate
- Tyler C Staff on Dec 27, 2019
BEST ANSWER: Thank you for your question.
We can only guarantee that you could achieve the screen configurations that are shown on the product page.
We can only guarantee that you could achieve the screen configurations that are shown on the product page.
- Reply
- Inaccurate
- Tyler C Staff on Dec 27, 2019
Vote for the best answer above!
Does this come in white or silver?
A shopper
on Dec 19, 2019
BEST ANSWER: Thank you for your question.
Currently this is only available in black.
Currently this is only available in black.
- Reply
- Inaccurate
- Tyler C Staff on Dec 27, 2019
BEST ANSWER: Thank you for your question.
Currently this is only available in black.
Currently this is only available in black.
- Reply
- Inaccurate
- Tyler C Staff on Dec 27, 2019
Vote for the best answer above!
If I put 3 32 inch monitors what would be the best setup I want it curved side by side towards me for my office?
Hovik d
on Jan 24, 2020
BEST ANSWER: Just have to play with them to get it right. Looks good once you find a sweet spot for your space
- Reply(1)
- Inaccurate
- Jonathan V on Jan 24, 2020
- Purchased on Sep 27, 2019
BEST ANSWER: Just have to play with them to get it right. Looks good once you find a sweet spot for your space
- Reply(1)
- Inaccurate
- Jonathan V on Jan 24, 2020
- Purchased on Sep 27, 2019
Vote for the best answer above!
how easy is height adjustment, want to go back and forth between sitting and standing?
A shopper
on Feb 17, 2020
BEST ANSWER: Thank you for your question.
As long as you adjust the screw between the arms properly you will be able to easily move the arms up and down.
As long as you adjust the screw between the arms properly you will be able to easily move the arms up and down.
- Reply
- Inaccurate
- Tyler C Staff on Feb 18, 2020
BEST ANSWER: Thank you for your question.
As long as you adjust the screw between the arms properly you will be able to easily move the arms up and down.
As long as you adjust the screw between the arms properly you will be able to easily move the arms up and down.
- Reply
- Inaccurate
- Tyler C Staff on Feb 18, 2020
Vote for the best answer above!
Where is it made? Parts are from?
New User U
on Mar 26, 2020
BEST ANSWER: Thank you for your question.
This is manufactured in China.
This is manufactured in China.
- Reply
- Inaccurate
- Tyler C Staff on Mar 27, 2020
BEST ANSWER: Thank you for your question.
This is manufactured in China.
This is manufactured in China.
- Reply
- Inaccurate
- Tyler C Staff on Mar 27, 2020
Vote for the best answer above!
I have 2 x 34 in ultra-wide monitors (32.5 in width) and was wondering what size (if any) monitor one would be able to fit in the center position if they were both mounted to the outside area?
Charles S
on Jul 19, 2020
BEST ANSWER: Hi, you would need to go smaller than 32" for the middle monitor, but even then your usable angles would be limited given the wide monitors on the outside arms. For larger monitors, you might get more flexibility and adjustment range from using separate monitor mounts. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Jul 24, 2020
BEST ANSWER: Hi, you would need to go smaller than 32" for the middle monitor, but even then your usable angles would be limited given the wide monitors on the outside arms. For larger monitors, you might get more flexibility and adjustment range from using separate monitor mounts. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Jul 24, 2020
Vote for the best answer above!
How do you tighten the two arm wing mount from swiveling? For example if I push the left monitor back then the right monitor moves forward because the whole wing moves. The plastic handle screw in mile pipe mount this turned tight but don’t know how to tighten more to keep it from swiveling. Otherwise great mount!
Louis C
on Aug 11, 2020
BEST ANSWER: Hi, sorry to hear about the movement issue and thanks for your purchase. I'm wondering if the upper arm pivots might be too new or too tight from the factory. If so, the easiest solution might be to "exercise" pivots above the arm's base so they move easier at the higher parts. You might be able to use a hex wrench (or maybe screw driver) to loosen some screws if needed. Alternatively you might also be able to use some tape on the pole to slightly increase the diameter before positioning the arm on top of it, although this isn't ideal but just something you could try if the above doesn't work.
- Reply
- Inaccurate
- Irv S Staff on Aug 14, 2020
BEST ANSWER: Hi, sorry to hear about the movement issue and thanks for your purchase. I'm wondering if the upper arm pivots might be too new or too tight from the factory. If so, the easiest solution might be to "exercise" pivots above the arm's base so they move easier at the higher parts. You might be able to use a hex wrench (or maybe screw driver) to loosen some screws if needed. Alternatively you might also be able to use some tape on the pole to slightly increase the diameter before positioning the arm on top of it, although this isn't ideal but just something you could try if the above doesn't work.
- Reply
- Inaccurate
- Irv S Staff on Aug 14, 2020
Vote for the best answer above!
Can this mount be installed on a standing desk equipped with a Vari cable management tray directly underneath the mount? I suppose the tray could be removed prior to installing the mount, but I'm worried the alignment might not allow the mount's two adjustment knobs to fit inside the tray. Even if the adjustment knobs fit inside the tray, I am worried they would fill up most of the middle section of the tray, leaving less space for cables.
A shopper
on Aug 17, 2020
BEST ANSWER: yes, using the supplied mount
- Reply
- Inaccurate
- Ernest S on Jul 1, 2021
- Purchased on Oct 30, 2020
BEST ANSWER: yes, using the supplied mount
- Reply
- Inaccurate
- Ernest S on Jul 1, 2021
- Purchased on Oct 30, 2020
Vote for the best answer above!
Questions For Similar Products
Reviews
4.6 / 5.0
59 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
45
7
4
1
2
Rated 5 out of 5
Very Sturdy!
I'm very satisfied with the monitor mount. It was a lot heavier than I thought it would be. The gas arms ship with the adjustment backed all the way out. They won't hold up a coffee cup lol. Once adjusted, it supports my three 27" monitors with ease. I highly recommend!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Great triple monitor mount, but not for 3 24"+ monitors
No complaints about this, easy setup, great price and quality. I have 2 24" and 1 27" monitor, all landscape, and the mount doesn't have much extra room to maneuver, so I wouldn't recommend this for 3 monitors bigger than that unless some are rotated 90 degress.
Added Feb 21, 2023
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Perfect for what I wanted.
It does exactly what I need it to do. Not disappointed in the least.
This has been my first monitor arm.
It was simple and straight forward to set up. Tools were included. (If I recall correctly)
Cable channels provided the space I needed to route my cables.
My only gripe is that it took a few hours of searching the web to find it.
At the time, monoprice was the only retailer that was selling a black triple monitor mount that was fully adjustable using gas spring.
All the others were chrome in color.
This has been my first monitor arm.
It was simple and straight forward to set up. Tools were included. (If I recall correctly)
Cable channels provided the space I needed to route my cables.
My only gripe is that it took a few hours of searching the web to find it.
At the time, monoprice was the only retailer that was selling a black triple monitor mount that was fully adjustable using gas spring.
All the others were chrome in color.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Excellent
It is a nice set up, it works well very sturdy and easy to adjust. All the cables are tucked away. It declutters the desk. The only negative is the center arm takes some adjusting to have it level with the outside arms.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Awesome
I love it, works great so I can stand or sit when I choose.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 3 out of 5
Think 2x before use it over 27?
Far from perfect, it is to small for 28? monitors, barely makes it. I wouldn?t recommend it for over 27? as arms at to short. Once figured out how squeeze the 28? monitors it is ok. Can?t move them to any direction but holds the right and tight.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Solid choice
High quality. Good value. Would definitely buy again.
Added May 19, 2021
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Good mount
This mount is good. It holds two monitors, one 24?, one 22?, and my laptop (via a Monoprice Vesa laptop stand) very well. All seem secure and there are hex screws in all the ?joints? to increase or decrease tension to ensure the screens don?t droop etc. and to allow the arms to move less if inadvertently bumped.
One con is that the two outer mount arms are connected in the middle & can be difficult to adjust without the opposite side moving in the other direction. I have to hold one side in place when moving the other to ensure it doesn?t move. The ?joint? hex screws can be loosened but I confirmed with Monoprice Customer Service that these screws can be loosened too much & eventually the arms would disconnect. I was unable to loosen them to the point that the arms would adjust independently, without me me holding one while moving the other & honestly besides the infrequent bump or inadvertent adjustment, once I had the screens in the right spots, my workflow doesn?t require frequent adjustment so this is fine for me.
Another con is that if you do want to adjust the gas arm or joint flex tension, you have to use a provided hex wrench. It would have been better & easier for the joints to have hand turn screw adjustments or an easy on mount storage option for the wrench. I ended up duct taping the hex wrench to the back of the mount for easy access in the event I need to use it again.
Otherwise this is a good mount for my multiple screen setup and I recommend it.
One con is that the two outer mount arms are connected in the middle & can be difficult to adjust without the opposite side moving in the other direction. I have to hold one side in place when moving the other to ensure it doesn?t move. The ?joint? hex screws can be loosened but I confirmed with Monoprice Customer Service that these screws can be loosened too much & eventually the arms would disconnect. I was unable to loosen them to the point that the arms would adjust independently, without me me holding one while moving the other & honestly besides the infrequent bump or inadvertent adjustment, once I had the screens in the right spots, my workflow doesn?t require frequent adjustment so this is fine for me.
Another con is that if you do want to adjust the gas arm or joint flex tension, you have to use a provided hex wrench. It would have been better & easier for the joints to have hand turn screw adjustments or an easy on mount storage option for the wrench. I ended up duct taping the hex wrench to the back of the mount for easy access in the event I need to use it again.
Otherwise this is a good mount for my multiple screen setup and I recommend it.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products