Due to limited supply, all products are sold on a first-come first-serve basis. Auto Notification does not
guarantee either availability or price. All prices are subject to change without notice.
*Your information will only be used to notify you when this item becomes available.
Start typing your question and we'll check if it was already asked and answered. Learn More
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 1 question
Browse 1 question
and 1 answer
do these work for both APC and UPC fiber jumpers?
A shopper
on May 11, 2017
BEST ANSWER:These work with any SC Fiber connector. Multi mode & Single mode connectors are the same size. Uni cams & Fusion Spliced pig tails that are SC will all work as well.
BEST ANSWER:These work with any SC Fiber connector. Multi mode & Single mode connectors are the same size. Uni cams & Fusion Spliced pig tails that are SC will all work as well.
Good product if you are doing networking. Would recommend.
PROS: I used this to light both SMF and 50 µm MMF links with no problems. I didn't expect the SMF to work but apparently the tolerances are good enough! Your mileage may vary though.
CONS: Will not work if you are doing digital audio links with optical S/PDIF (Toslink) connectors! I saw one reviewer who had done this. Almost did not buy the product because of it. But he mentioned his cables having rubber connectors, so I knew it had to have been the wrong application (SC cables don't have any rubber).
CONS: Optical cables do not fit inside far enough to "Snap" in. I had to cut off the rubber around the cable just to get it to fit and it still didn't fit correctly. I had a one above tv and one below tv to hide cable in wall. The connection is so bad that I got NONE, ZIP, ZERO sound into my receiver. I ended up using it as an extender for my 2 optical cables and it works fine for that, but that's not what this is intended to be.
