Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Product # 21603
UPC # 889028049259
$54.99
*Affirm is not available for business or international orders
Qty:
Out of Stock
ETA: TBD
Note:
Due to limited supply, all products are sold on a first-come first-serve basis. Auto Notification does not guarantee either availability or price. All prices are subject to change without notice.
*Your information will only be used to notify you when this item becomes available.
Qty: 1
$54.99
Qty: 2-9
$53.07
Qty: 10-19
$52.24
Qty: 20-49
$51.42
Qty: 50+
$50.59
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 133 questions
Browse 133 questions
and 184 answers
Will the surface bubble if you get condensation on it?
Jeremy L
on Sep 17, 2020
BEST ANSWER: It’s a pretty durable laminate, more like a kitchen countertop, so I don’t believe it would bubble with a little condensation or even if you accidentally spilled a drink on it. Probably not right for you if your office is an underwater laboratory, though.
- Reply
- Inaccurate
- ERIC S. on Sep 17, 2020
- Purchased on May 11, 2020
BEST ANSWER: It’s a pretty durable laminate, more like a kitchen countertop, so I don’t believe it would bubble with a little condensation or even if you accidentally spilled a drink on it. Probably not right for you if your office is an underwater laboratory, though.
- Reply
- Inaccurate
- ERIC S. on Sep 17, 2020
- Purchased on May 11, 2020
Not so far (I've had this for a few weeks). It is a finger print magnet, esp since it's black, and when I leave a glass of water on it, it does dry with a water mark. But it goes away when I wipe it with a damp cloth. I would buy it again.
- Reply
- Inaccurate
- ramin m on Sep 17, 2020
- Purchased on Aug 25, 2020
I have had some condensation on the desk and it has not been an issue, I do try to use a coaster though to avoid any potential problems. The surface of the desk doesn’t seem too susceptible to bubbling from what I have seen
- Reply
- Inaccurate
- Derek on Sep 17, 2020
- Purchased on Apr 5, 2020
It does not. I get condensation on it on the daily and it's still just fine months later. I also wet it down when I clean it and no problems there either.
- Reply
- Inaccurate
- Joshua N on Sep 17, 2020
- Purchased on May 26, 2020
I don’t believe so, I’ve been using it for a few months now. I have my cup of coffee and water bottle on it during my 8+ hour workday. It’s great quality.
- Reply
- Inaccurate
- Ameilia F on Sep 17, 2020
- Purchased on Jun 12, 2020
As of now, no. It is well laminated.
- Reply
- Inaccurate
- Jeremy S on Sep 17, 2020
- Purchased on Aug 18, 2020
Vote for the best answer above!
Is this desk top a one or two piece?
A shopper
on Jan 20, 2021
BEST ANSWER: One piece. The one I bought curved black top. I had bought a complete electric stand up desk from another site and the top was delivering 3 weeks later. I bought this one from Monoprice and it came in a day. Very happy with it.
- Reply
- Inaccurate
- Jeffrey R on Jan 20, 2021
- Purchased on Oct 9, 2020
BEST ANSWER: One piece. The one I bought curved black top. I had bought a complete electric stand up desk from another site and the top was delivering 3 weeks later. I bought this one from Monoprice and it came in a day. Very happy with it.
- Reply
- Inaccurate
- Jeffrey R on Jan 20, 2021
- Purchased on Oct 9, 2020
The desktop is a single piece. It has some pre-drilled holes, but depending on which base you buy, you will likely have to drill more to mount properly.
- Reply
- Inaccurate
- Bill B on Jan 21, 2021
- Purchased on Jun 24, 2020
The desk top is one piece. The legs are purchased separately from the desk top?
- Reply
- Inaccurate
- Matthew L on Jan 21, 2021
- Purchased on Nov 17, 2020
One piece, and it's super easy to mount to the frame.
- Reply
- Inaccurate
- Aaron H on Jan 21, 2021
- Purchased on Oct 1, 2020
Vote for the best answer above!
How deep is the notch. By that I mean from the apex (top) of the notch to the widest part of the notch measuring outwards, how long is that? Also how long is the widest part of the notch?
New User U
on Apr 1, 2021
BEST ANSWER: The second product photo should have all the dimensions you need. The notch is 5.9" deep and the notch itself is 39.4in wide/
- Reply
- Inaccurate
- Gregory H on Apr 1, 2021
- Purchased on Jun 17, 2020
BEST ANSWER: The second product photo should have all the dimensions you need. The notch is 5.9" deep and the notch itself is 39.4in wide/
- Reply
- Inaccurate
- Gregory H on Apr 1, 2021
- Purchased on Jun 17, 2020
The notch spans 40" wide and is 6" deep from the middle of the notch to the front edge of the desk.
- Reply
- Inaccurate
- Derek on Apr 1, 2021
- Purchased on Apr 5, 2020
If by notch you mean the cut in the side it is about 2.5 in deep and about 3 ft wide.
- Reply
- Inaccurate
- Ethan L on Apr 1, 2021
- Purchased on Aug 23, 2020
The notch is approx. 40 inches wide and 4 inches deep at the apex.
- Reply(1)
- Inaccurate
- Joshua N on Apr 2, 2021
- Purchased on May 26, 2020
Approximately six inches at the deepest point.
- Reply
- Inaccurate
- Dean S on Apr 1, 2021
- Purchased on May 11, 2020
Vote for the best answer above!
Would this work with the 35377 single motor legs?
A shopper
on Jun 25, 2020
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Monoprice Height Adjustable Single Motor Back to Basics Electric Sit-Stand Desk Frame, Black
BEST ANSWER: Yes. I have it set up with that configuration. Works fine.
- Reply
- Inaccurate
- Dean S on Jun 25, 2020
- Purchased on May 11, 2020
BEST ANSWER: Yes. I have it set up with that configuration. Works fine.
- Reply
- Inaccurate
- Dean S on Jun 25, 2020
- Purchased on May 11, 2020
I have this same setup at my office and it works perfectly.
- Reply
- Inaccurate
- Luis S on Jun 25, 2020
- Purchased on Dec 4, 2019
In this configuration, the table top isn't free shipping.
- Reply
- Inaccurate
- Guruswami N on Aug 10, 2020
Vote for the best answer above!
Is the surface scratch resistant? Any laminate or acrylic type coating to protect from scratches?
A shopper
on Jan 23, 2021
BEST ANSWER: It’s pretty durable but nothing that’s laminated particle board is indestructible. We use a mouse pad and haven’t noticed any scratches from moving the keyboard or other items around on the surface. Had it since May 2020 and it’s used every day.
- Reply
- Inaccurate
- ERIC S. on Jan 23, 2021
- Purchased on May 11, 2020
BEST ANSWER: It’s pretty durable but nothing that’s laminated particle board is indestructible. We use a mouse pad and haven’t noticed any scratches from moving the keyboard or other items around on the surface. Had it since May 2020 and it’s used every day.
- Reply
- Inaccurate
- ERIC S. on Jan 23, 2021
- Purchased on May 11, 2020
I’ve gotten no scratches thus far, I’ve had it for 6 months.
- Reply
- Inaccurate
- Troya L. E on Jan 23, 2021
Vote for the best answer above!
If I purchase the 6ft or 5ft BLACK table top like Product # 21605 will the table top color match the legs on this item?
Bahram S
on Aug 30, 2021
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Monoprice Height Adjustable Dual Motor Easy Assembly Fold-Out Sit-Stand Desk Frame
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 6ft Black, Compatible with Electric Desks
BEST ANSWER: We bought our desk in January 2021 and the legs matched the top. They were both black.
- Reply
- Inaccurate
- Jeanette G on Aug 30, 2021
BEST ANSWER: We bought our desk in January 2021 and the legs matched the top. They were both black.
- Reply
- Inaccurate
- Jeanette G on Aug 30, 2021
Vote for the best answer above!
For the Workstream Triple Motor Height Adjustable Sit-Stand Corner Desk Frame, 3-Leg Corner L-Shaped Table Base, can the "L" shaped configuration, be the 5' wide section with the 6' section?
Emil M
on Jul 19, 2019
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 6ft Black, Compatible with Electric Desks
Monoprice Triple-Motor Height-Adjustable Sit-Stand L-Shaped Corner Desk Frame, Black
BEST ANSWER: Hi, this combination is possible. You will just have a longer overhang on one side of the 5ft desktop than if you were using a 4ft top. This is still OK, just avoid excessive loads on the overhang for long-term durability and to prevent sagging over time. Thanks for checking.
- Reply(1)
- Inaccurate
- Irv S Staff on Jul 22, 2019
Thank you. One more question. Why do the instructions show the 6ft table being installed on the right side such that it is not equally supported (the middle arm is 90 degrees to the end arm. It would seem that the 6ft panel should go on the left side as you stand in the "v" shape so the top is equally supported on the arms that are set at parallel to each other, giving better support for the smaller top via the mating plates.
Hi, thanks for bringing this up. You are correct, that orientation is probably not the most optimal way to mount the desktop, switching the tops to provide more support for the longer top would be better. We'll update the manual to reflect it. Having said that, the tops would still be supported sufficiently by the length of the frame and the mounting plates. Thanks for the feedback.
BEST ANSWER: Hi, this combination is possible. You will just have a longer overhang on one side of the 5ft desktop than if you were using a 4ft top. This is still OK, just avoid excessive loads on the overhang for long-term durability and to prevent sagging over time. Thanks for checking.
- Reply(1)
- Inaccurate
- Irv S Staff on Jul 22, 2019
Thank you. One more question. Why do the instructions show the 6ft table being installed on the right side such that it is not equally supported (the middle arm is 90 degrees to the end arm. It would seem that the 6ft panel should go on the left side as you stand in the "v" shape so the top is equally supported on the arms that are set at parallel to each other, giving better support for the smaller top via the mating plates.
Hi, thanks for bringing this up. You are correct, that orientation is probably not the most optimal way to mount the desktop, switching the tops to provide more support for the longer top would be better. We'll update the manual to reflect it. Having said that, the tops would still be supported sufficiently by the length of the frame and the mounting plates. Thanks for the feedback.
Thank you for your question.
Since the width of the desk is adjustable you would be able to have a 5' and 6' long desktop.
Since the width of the desk is adjustable you would be able to have a 5' and 6' long desktop.
- Reply
- Inaccurate
- Tyler C Staff on Jul 22, 2019
Vote for the best answer above!
Do these table tops have the holes pre-drilled for the desk frame that you guys sell?
Thanks,
Mike
Thanks,
Mike
A shopper
on Jul 29, 2017
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Monoprice Sit-Stand Dual-Motor Height Adjustable Table Desk Frame, Electric, Black
BEST ANSWER: Hi, yes there are pre-drilled pilot holes on the desktops to make it easier to align and screw them to the desk frames. However you would need to choose your own location for the control panel since the best location for this part would largely depend on your specific desk setup. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Aug 4, 2017
BEST ANSWER: Hi, yes there are pre-drilled pilot holes on the desktops to make it easier to align and screw them to the desk frames. However you would need to choose your own location for the control panel since the best location for this part would largely depend on your specific desk setup. Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Aug 4, 2017
Vote for the best answer above!
Are there cutouts on all the desk sizes? From the pictures, only the 60" has the cutout.
A shopper
on Jul 31, 2017
BEST ANSWER: Hi, you are correct that only the 60" size has the contoured cutout on one edge. Thanks for asking.
- Reply
- Inaccurate
- Irv S Staff on Aug 4, 2017
BEST ANSWER: Hi, you are correct that only the 60" size has the contoured cutout on one edge. Thanks for asking.
- Reply
- Inaccurate
- Irv S Staff on Aug 4, 2017
Vote for the best answer above!
Is there a 5ft top that does not have the contoured side? If not, can anyone recommend a good one?
I was looking at the BEKANT table top from IKEA, just not sure if the predrilled holes in that top will get in the way for this installation.
I was looking at the BEKANT table top from IKEA, just not sure if the predrilled holes in that top will get in the way for this installation.
A shopper
on Apr 3, 2018
BEST ANSWER: We only have the 5ft lengths with the contoured edge. Any solid desktop with solid mounting points should work (avoid hollow or paper core tops), you would just need to drill on your own. Our desk frames actually ship with self-drilling screws but they do take extra effort to install if holes are not pre-drilled. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Apr 6, 2018
BEST ANSWER: We only have the 5ft lengths with the contoured edge. Any solid desktop with solid mounting points should work (avoid hollow or paper core tops), you would just need to drill on your own. Our desk frames actually ship with self-drilling screws but they do take extra effort to install if holes are not pre-drilled. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Apr 6, 2018
Vote for the best answer above!
What is the desk rated at for max load? Also what is the weight of the 5ft curved version?
A shopper
on Apr 18, 2018
BEST ANSWER: Hi, when used with the Monoprice Sit-Stand Desk Frames, these tops surpass the frame's rated maximum load (176 lbs). The top weighs close to 40lbs.
We do not specify a rated maximum load for these tops since that would largely depend on how the tops are mounted. Properly mounted and supported, they can take a lot of weight since they have solid engineered wood cores (no paper fill or honeycombs). These desks are designed for office or computer use so they can easily support office equipment, monitor mounts and stands, and computers. On the other hand, big overhangs or unsupported sections should be avoided since those could cause long term issues if subjected to too much weight.
Hope this helps. Thanks.
We do not specify a rated maximum load for these tops since that would largely depend on how the tops are mounted. Properly mounted and supported, they can take a lot of weight since they have solid engineered wood cores (no paper fill or honeycombs). These desks are designed for office or computer use so they can easily support office equipment, monitor mounts and stands, and computers. On the other hand, big overhangs or unsupported sections should be avoided since those could cause long term issues if subjected to too much weight.
Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Apr 18, 2018
BEST ANSWER: Hi, when used with the Monoprice Sit-Stand Desk Frames, these tops surpass the frame's rated maximum load (176 lbs). The top weighs close to 40lbs.
We do not specify a rated maximum load for these tops since that would largely depend on how the tops are mounted. Properly mounted and supported, they can take a lot of weight since they have solid engineered wood cores (no paper fill or honeycombs). These desks are designed for office or computer use so they can easily support office equipment, monitor mounts and stands, and computers. On the other hand, big overhangs or unsupported sections should be avoided since those could cause long term issues if subjected to too much weight.
Hope this helps. Thanks.
We do not specify a rated maximum load for these tops since that would largely depend on how the tops are mounted. Properly mounted and supported, they can take a lot of weight since they have solid engineered wood cores (no paper fill or honeycombs). These desks are designed for office or computer use so they can easily support office equipment, monitor mounts and stands, and computers. On the other hand, big overhangs or unsupported sections should be avoided since those could cause long term issues if subjected to too much weight.
Hope this helps. Thanks.
- Reply
- Inaccurate
- Irv S Staff on Apr 18, 2018
Vote for the best answer above!
For the 5ft, curved model; What's the min. width?
A shopper
on Aug 17, 2018
BEST ANSWER: Thank you for your question.
Unfortunately we would not have the dimensions showing what min width, only the maximum width.
Unfortunately we would not have the dimensions showing what min width, only the maximum width.
- Reply
- Inaccurate
- Tyler C Staff on Jul 31, 2019
BEST ANSWER: Thank you for your question.
Unfortunately we would not have the dimensions showing what min width, only the maximum width.
Unfortunately we would not have the dimensions showing what min width, only the maximum width.
- Reply
- Inaccurate
- Tyler C Staff on Jul 31, 2019
Vote for the best answer above!
is there a 5ft non-curved version available?
Jason J
on Jan 2, 2019
BEST ANSWER: Hi, we do not have non-curved versions for the 5ft length. Non-curved is only available for the 4ft (21601-21602) and 6ft lengths (21605 - 21606) at this time. They could be custom-made for bigger orders but there are lead times and minimum order quantities involved. Thanks for checking.
- Reply(1)
- Inaccurate
- Irv S Staff on Jan 2, 2019
BEST ANSWER: Hi, we do not have non-curved versions for the 5ft length. Non-curved is only available for the 4ft (21601-21602) and 6ft lengths (21605 - 21606) at this time. They could be custom-made for bigger orders but there are lead times and minimum order quantities involved. Thanks for checking.
- Reply(1)
- Inaccurate
- Irv S Staff on Jan 2, 2019
Vote for the best answer above!
Would any of these work in place of one rectangular top on product 34827 (Workstream by Monoprice Triple Motor Height Adjustable Sit-Stand Corner Desk Frame, 3-Leg Corner L-Shaped Table Base)?
Jeremy R
on Mar 13, 2019
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Monoprice Triple-Motor Height-Adjustable Sit-Stand L-Shaped Corner Desk Frame, Black
BEST ANSWER: Hi, this could work but a couple of things might not be ideal. First is that the overhang would end up being long at the side edge and that section of the desk should probably not support too much weight for long term durability and stability. Second is the ergonomic curve won't be right next to the side desktop, which might be OK for some, but might not be ideal for others who would want to sit closer to the return side of the desk. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Mar 13, 2019
BEST ANSWER: Hi, this could work but a couple of things might not be ideal. First is that the overhang would end up being long at the side edge and that section of the desk should probably not support too much weight for long term durability and stability. Second is the ergonomic curve won't be right next to the side desktop, which might be OK for some, but might not be ideal for others who would want to sit closer to the return side of the desk. Hope this helps.
- Reply
- Inaccurate
- Irv S Staff on Mar 13, 2019
Vote for the best answer above!
Does this mousepad also fit the one-piece desktop surface, Product # 21603?
Can you mount the dual monitor mount Product # 15525 through one of the holes cut for cable management?
Can you mount the dual monitor mount Product # 15525 through one of the holes cut for cable management?
Joshua W
on Mar 18, 2019
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Workstream by Monoprice Dual-Monitor Adjustable Gas-Spring Desk Mount for 15~34in Monitors
Workstream by Monoprice Whole-Desk Mouse Pad For 3-Piece 5ft Desktop, Black
BEST ANSWER: Hi, the surface area will be bigger and the front contours of the mousepad will be different since it is meant to be used with the 33085 and 33086 desktops. Product 15525 can be mounted on the grommet holes of 33085 or 33086 and with the matching mouse pad, alternatively you could also drill a 1/4" hole on 21603 if you want the monitor mount towards the middle of the desk instead of clamped on the edge. Hope this helps.
- Reply(1)
- Inaccurate
- Irv S Staff on Mar 18, 2019
BEST ANSWER: Hi, the surface area will be bigger and the front contours of the mousepad will be different since it is meant to be used with the 33085 and 33086 desktops. Product 15525 can be mounted on the grommet holes of 33085 or 33086 and with the matching mouse pad, alternatively you could also drill a 1/4" hole on 21603 if you want the monitor mount towards the middle of the desk instead of clamped on the edge. Hope this helps.
- Reply(1)
- Inaccurate
- Irv S Staff on Mar 18, 2019
Vote for the best answer above!
Will the pre drilled holes line up if I rotate the top so the contoured side is in the back?
A shopper
on Mar 14, 2020
BEST ANSWER: Thank you for your question.
You don't have to use the pre drilled holes to screw this into a desk so it would not matter.
You don't have to use the pre drilled holes to screw this into a desk so it would not matter.
- Reply
- Inaccurate
- Tyler C Staff on Mar 16, 2020
BEST ANSWER: Thank you for your question.
You don't have to use the pre drilled holes to screw this into a desk so it would not matter.
You don't have to use the pre drilled holes to screw this into a desk so it would not matter.
- Reply
- Inaccurate
- Tyler C Staff on Mar 16, 2020
Vote for the best answer above!
All set to buy this $54.99 plus tax item and shipping is $299. ????? Seriously?
Any other options available? Thanks!
Any other options available? Thanks!
JASON L
on Aug 2, 2020
BEST ANSWER: Hi, the combination of this item's weight, shipping dimensions, and your distance from our warehouses could be triggering surcharges with the shipping providers. While this product gives a good option for small business customers who may be buying multiple desk frames and tops and could therefore split the shipping cost between the items, it could be cost-prohibitive for customers purchasing a single desk only.Alternative options you could consider are:Product 33085 for a desk top that is made up of 3 smaller parts and could ship at a lower cost.Product 30909 which is a smaller 4ft desk top. It was designed for our gas-lift desk frames, but it could be used for other desks if you could drill your own mounting location to use mounting screws.Product 30913 which is a 5ft version of the above desktop. You might need to drill your own mounting location as well, this is slightly smaller than the original top you were trying to purchase and might be able to ship at a lower rate.Aside from the desk tops on our website, you could also use most other desktops from Big Box furniture stores or Home Improvement stores.Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Aug 4, 2020
BEST ANSWER: Hi, the combination of this item's weight, shipping dimensions, and your distance from our warehouses could be triggering surcharges with the shipping providers. While this product gives a good option for small business customers who may be buying multiple desk frames and tops and could therefore split the shipping cost between the items, it could be cost-prohibitive for customers purchasing a single desk only.Alternative options you could consider are:Product 33085 for a desk top that is made up of 3 smaller parts and could ship at a lower cost.Product 30909 which is a smaller 4ft desk top. It was designed for our gas-lift desk frames, but it could be used for other desks if you could drill your own mounting location to use mounting screws.Product 30913 which is a 5ft version of the above desktop. You might need to drill your own mounting location as well, this is slightly smaller than the original top you were trying to purchase and might be able to ship at a lower rate.Aside from the desk tops on our website, you could also use most other desktops from Big Box furniture stores or Home Improvement stores.Thanks for checking.
- Reply
- Inaccurate
- Irv S Staff on Aug 4, 2020
Vote for the best answer above!
Can I buy 2 of these frames, and put 2 different sized tabletop, PN 21603 and PN 21601, to form an L shaped desk?
Benjamin H
on Aug 21, 2020
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 4ft Black, Compatible with Electric Desks
Monoprice Sit-Stand Height Adjustable Table Desk Frame Workstation, Manual Crank
BEST ANSWER: Hi, if you are building an L-shaped desk with two frames, it might be best to keep the desks separate and just butted right next to each other, unless you are OK with adjusting the two frames at the same time to avoid causing weird stresses to the desk that could result in instability or reduced durability.
- Reply
- Inaccurate
- Irv S Staff on Aug 28, 2020
BEST ANSWER: Hi, if you are building an L-shaped desk with two frames, it might be best to keep the desks separate and just butted right next to each other, unless you are OK with adjusting the two frames at the same time to avoid causing weird stresses to the desk that could result in instability or reduced durability.
- Reply
- Inaccurate
- Irv S Staff on Aug 28, 2020
Vote for the best answer above!
When will the 4ft version come into stock? Or is there a 4ft wide desktop available for the manual crank sit-stand table desk?
Shreyas P
on Aug 28, 2020
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Monoprice Sit-Stand Height Adjustable Table Desk Frame Workstation, Manual Crank
BEST ANSWER: Hi, the 30909 4ft desktop could work, you will just need to position it yourself since the pre-drilled holes are different.
We are still trying to get more of the other desk tops back, but that size would not be available until at least later this year.
We are still trying to get more of the other desk tops back, but that size would not be available until at least later this year.
- Reply
- Inaccurate
- Irv S Staff on Aug 28, 2020
BEST ANSWER: Hi, the 30909 4ft desktop could work, you will just need to position it yourself since the pre-drilled holes are different.
We are still trying to get more of the other desk tops back, but that size would not be available until at least later this year.
We are still trying to get more of the other desk tops back, but that size would not be available until at least later this year.
- Reply
- Inaccurate
- Irv S Staff on Aug 28, 2020
Vote for the best answer above!
Can items be undermounted to this desk top. For instance, a tower, under desk keyboard tray, and other accessories?
Gary T
on Feb 24, 2021
BEST ANSWER: Hi, it is possible because this desktop has a solid core throughout (unlike low-cost options that have honeycomb/hollow cores). However you need to make sure that you will be using the proper fasteners for particle board/engineered wood, and that the load will be within the specs of the fasteners for the material.
- Reply
- Inaccurate
- Irv S Staff on Mar 2, 2021
BEST ANSWER: Hi, it is possible because this desktop has a solid core throughout (unlike low-cost options that have honeycomb/hollow cores). However you need to make sure that you will be using the proper fasteners for particle board/engineered wood, and that the load will be within the specs of the fasteners for the material.
- Reply
- Inaccurate
- Irv S Staff on Mar 2, 2021
Vote for the best answer above!
Since the 4' tabletops are out of stock with no definite dates of restocking, will this combination work?
Can I use the 5' in combination with the 6 ' on the L-Shape Standing Desk?
Can I use the 5' in combination with the 6 ' on the L-Shape Standing Desk?
M P
on Mar 17, 2021
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 6ft Black, Compatible with Electric Desks
Monoprice Triple-Motor Height-Adjustable Sit-Stand L-Shaped Corner Desk Frame, Gray
BEST ANSWER: Now that mine is Built-in in place I can confirm that this works. I have a 6' section on the left and a 5' curved section on the right. Kind of stunning when it's finished.
- Reply
- Inaccurate
- Jeremy Z on Sep 13, 2021
- Purchased on Aug 18, 2021
BEST ANSWER: Now that mine is Built-in in place I can confirm that this works. I have a 6' section on the left and a 5' curved section on the right. Kind of stunning when it's finished.
- Reply
- Inaccurate
- Jeremy Z on Sep 13, 2021
- Purchased on Aug 18, 2021
Vote for the best answer above!
I just bought this with 2 5' foot tops. It seems that no matter how I try to place them, they don't work. Is this a supported configuration?
Charles E
on May 22, 2021
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Monoprice Triple-Motor Height-Adjustable Sit-Stand L-Shaped Corner Desk Frame, Black
Monoprice Triple-Motor Height-Adjustable Sit-Stand L-Shaped Corner Desk Frame, White
BEST ANSWER: Hi, the curves on the 5ft tops would prevent the return side from fitting snuggly. Also, butting the 5ft against the width of the other top might end up to be too long (you'd have a 7.5 ft length on one side). You could still make it work if you have the space and as long as you don't put too much weight on the overhangs.
- Reply
- Inaccurate
- Irv S Staff on May 28, 2021
BEST ANSWER: Hi, the curves on the 5ft tops would prevent the return side from fitting snuggly. Also, butting the 5ft against the width of the other top might end up to be too long (you'd have a 7.5 ft length on one side). You could still make it work if you have the space and as long as you don't put too much weight on the overhangs.
- Reply
- Inaccurate
- Irv S Staff on May 28, 2021
Vote for the best answer above!
Does this fit with the gas/pneumatic sit/stand desk?
A shopper
on Sep 1, 2021
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Workstream by Monoprice Height Adjustable Gas-Lift Sit-Stand Desk Frame, 5ft
BEST ANSWER: Hi, product 30913 would work better for this desk frame and will mount directly.
The table top you asked about could work but there are a couple of things to consider. First is there are no direct mounting points, although it is easy enough to screw to the desk directly. Second is that top is heavier so it doesn't work as well for the gas lift desk with its lower load rating.
The table top you asked about could work but there are a couple of things to consider. First is there are no direct mounting points, although it is easy enough to screw to the desk directly. Second is that top is heavier so it doesn't work as well for the gas lift desk with its lower load rating.
- Reply
- Inaccurate
- Irv S Staff on Sep 2, 2021
BEST ANSWER: Hi, product 30913 would work better for this desk frame and will mount directly.
The table top you asked about could work but there are a couple of things to consider. First is there are no direct mounting points, although it is easy enough to screw to the desk directly. Second is that top is heavier so it doesn't work as well for the gas lift desk with its lower load rating.
The table top you asked about could work but there are a couple of things to consider. First is there are no direct mounting points, although it is easy enough to screw to the desk directly. Second is that top is heavier so it doesn't work as well for the gas lift desk with its lower load rating.
- Reply
- Inaccurate
- Irv S Staff on Sep 2, 2021
Vote for the best answer above!
can I use this on Sit-Stand frames from other companies?
A shopper
on May 14, 2022
BEST ANSWER: I did and it fits/works perfectly!
- Reply
- Inaccurate
- Nancy L on May 14, 2022
- Purchased on Aug 19, 2021
BEST ANSWER: I did and it fits/works perfectly!
- Reply
- Inaccurate
- Nancy L on May 14, 2022
- Purchased on Aug 19, 2021
Vote for the best answer above!
Does Monoprice sell the 5 foot tabletop without the front indentation? They have all 4 edges straight for the 4 and 6 feet tops.
A shopper
on Sep 29, 2023
BEST ANSWER: It doesn't look like they sell that option.
- Reply
- Inaccurate
- Derek on Oct 2, 2023
- Purchased on Apr 5, 2020
BEST ANSWER: It doesn't look like they sell that option.
- Reply
- Inaccurate
- Derek on Oct 2, 2023
- Purchased on Apr 5, 2020
Vote for the best answer above!
What's the diameter of the 8 holes used to affix the top? (Are the screws labelled S-B in the dual motor desk frames used for that? If so, can you also provide their dimensions, like thread diameter, head diameter, and length?)
New User U
on Jun 25, 2020
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Monoprice Sit-Stand Dual-Motor Height Adjustable Table Desk Frame, Electric, Black
Monoprice Sit-Stand Dual-Motor Height Adjustable Table Desk Frame, Electric, White
Monoprice Sit-Stand Dual-Motor Height Adjustable Table Desk Frame, Electric, Gray
Monoprice 3-piece Desktop for Motorized and Manual-Crank Height Adjustable Desks, Black
Where can we find a construction manual?
A shopper
on Apr 3, 2021
Do you have the 5ft top with out the notch?
kenneth m
on Sep 2, 2021
Can this desktop be used with a 6ft table top on L-Shaped frame ?
Reuben B
on Dec 20, 2021
Is this compatible with other Monoprice table tops like the workstream 5'?
A shopper
on Jun 16, 2022
Monoprice Table Top for Sit-Stand Height-Adjustable Desk, 5ft Black, Compatible with Electric Desks
Monoprice WFH Single Motor Height Adjustable Motorized Complete Sit-Stand Desk with Solid-core Wood Top, 47.2 x 23.6 Inch, Black
Questions For Similar Products
Reviews
4.4 / 5.0
54 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
38
6
7
1
2
Rated 3 out of 5
Make edges smoother please
The corners are very sharp. Can be softened so that small children dont get hurt while walking closeby. Make edges smoother please
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 2 out of 5
Works well 1 Year, you're on your own afterwards.
4 Stars for the first year, 1 Star for everything else.
This item worked well for me for 1 year, but almost exactly 1 year after purchase the controller broke. Now the desk does not go down fully, it?s stuck about 35? off the ground. I reached out to Monoprice and did 2 hours of troubleshooting with them. This unfortunately did not fix my issue and I?m stuck with a half sitting / always standing desk.
I spoke to a supervisor who at first said they would replace the item, but then said it?s out of warranty by a few days. As a courtesy, they said if ship the desk within 30 days across the country to Monoprice they?ll send me new one. A quote from UPS said it will cost $260 to ship this item back to their facility, and this doesn?t include me having to break down the desk and pack it up. Currently, on Monoprice.com, this item currently sells for $279.99 and there is currently free shipping available. This option is not the painless operation their customer service promises on the website
This item worked well for me for 1 year, but almost exactly 1 year after purchase the controller broke. Now the desk does not go down fully, it?s stuck about 35? off the ground. I reached out to Monoprice and did 2 hours of troubleshooting with them. This unfortunately did not fix my issue and I?m stuck with a half sitting / always standing desk.
I spoke to a supervisor who at first said they would replace the item, but then said it?s out of warranty by a few days. As a courtesy, they said if ship the desk within 30 days across the country to Monoprice they?ll send me new one. A quote from UPS said it will cost $260 to ship this item back to their facility, and this doesn?t include me having to break down the desk and pack it up. Currently, on Monoprice.com, this item currently sells for $279.99 and there is currently free shipping available. This option is not the painless operation their customer service promises on the website
- Was this review helpful? Yes (2) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (1)
- Flag as Inappropriate
Rated 4 out of 5
Very nice tabletop for my sit stand desk.
I purchased this table top to go with my dual motor sit stand desk frame (also purchased from Monoprice). The desk is great. I like the rounded cutout at the front and the depth is perfect. Its thick enough that I had no issue attaching a dual monitor mount to it as well ... along with some ikea cable management trays I attached to the bottom.
Only gripe is that the desk is shiny ... very shiny. So when the sun comes through my office window it can magnify things quite a bit (I know, first world problems). It also shows finger prints and water rings very prominently. Those two things are very minor IMHO and I would purchase this table top again for sure.
Only gripe is that the desk is shiny ... very shiny. So when the sun comes through my office window it can magnify things quite a bit (I know, first world problems). It also shows finger prints and water rings very prominently. Those two things are very minor IMHO and I would purchase this table top again for sure.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
I now love my workspace!
I highly recommend this item if you are looking for plenty of room without sacrificing sturdiness. It was strong enough when drilling the screws and it did not crack. I like the curve of the front to be able to push my chair all the way forward and still be able to use the sides. Definitely worth it and is much better than the one I got from UpLift Desk.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Response from Monoprice
We really appreciate the time you took to write a review!
Thank you for choosing Monoprice.
Thank you for choosing Monoprice.
September 16, 2021
New User U
Rated 5 out of 5
Pleased in San Diego
Was perfect - easy to set up and a great value!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Perfect table top
Excellent shipping, solid construction. Can attract fingerprints but just wipe it here and there.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Excellent Table Top
Purchased this to go with my powered sit/stand base. Excellent together and very good quality.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Screwed it right on top of my cheap Walmart desk....worked perfectly :)
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Quality, Durability, and Price...
The price is right and the amount of desk space is amazing... I have a 38" monitor, laptop, laptop dock, desk pad, notebook, drink coaster, etc on my desktop and nothing feels crowded...
The unit was surprisingly heavy which conveys a sense of quality and durability...
The unit was surprisingly heavy which conveys a sense of quality and durability...
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products