Monoprice Replacement 3D Printer Endstop Limit Switch for the Maker Select 3D Printer V2 (13860)
Product # 15931
$2.99
Out of Stock
ETA: TBD
Note:
Due to limited supply, all products are sold on a first-come first-serve basis. Auto Notification does not guarantee either availability or price. All prices are subject to change without notice.
*Your information will only be used to notify you when this item becomes available.
Qty: 1
$2.99
Qty: 2-9
$2.99
Qty: 10-19
$2.99
Qty: 20-49
$2.99
Qty: 50+
$2.99
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 5 questions
Browse 5 questions
and 8 answers
Will this work on Monoprice maker select v2?
New User U
on Nov 24, 2019
BEST ANSWER: Yes I used this on the v2, its a bit bigger than the original ones, so I only fastned one of the screws onto the frame, but it works fine, and if you tighten it, it wont move. Works great!
- Reply
- Inaccurate
- Javier P on Nov 24, 2019
- Purchased on Mar 28, 2019
BEST ANSWER: Yes I used this on the v2, its a bit bigger than the original ones, so I only fastned one of the screws onto the frame, but it works fine, and if you tighten it, it wont move. Works great!
- Reply
- Inaccurate
- Javier P on Nov 24, 2019
- Purchased on Mar 28, 2019
I also bought it for the v2 and while the original switch is smaller, this one also works. Use one screw hole instead of two, and check it regularly to make sure it isn't loose.
- Reply
- Inaccurate
- jay y on Nov 25, 2019
- Purchased on Nov 1, 2019
it depends on whether the screw holes match the bracket holes. I jury rigged mine but it worked
- Reply
- Inaccurate
- Dallas F on Dec 2, 2019
- Purchased on Mar 19, 2019
Yes, I installed on my v2.1 when the y axis would not stop. Fixed the issue.
- Reply
- Inaccurate
- Kyle T. M on Nov 26, 2019
- Purchased on Apr 3, 2019
Vote for the best answer above!
How do I know if my switch is bad?
A shopper
on Sep 30, 2019
BEST ANSWER: Thank you for your question.
There are two ways to know if your switch is bad:
1. Your current switch will no longer click when you press down on the metal tab that comes out of the switch
1. The axis the switch is controlling will not stop moving when the switch is activated.
There are two ways to know if your switch is bad:
1. Your current switch will no longer click when you press down on the metal tab that comes out of the switch
1. The axis the switch is controlling will not stop moving when the switch is activated.
- Reply
- Inaccurate
- Tyler C Staff on Sep 30, 2019
BEST ANSWER: Thank you for your question.
There are two ways to know if your switch is bad:
1. Your current switch will no longer click when you press down on the metal tab that comes out of the switch
1. The axis the switch is controlling will not stop moving when the switch is activated.
There are two ways to know if your switch is bad:
1. Your current switch will no longer click when you press down on the metal tab that comes out of the switch
1. The axis the switch is controlling will not stop moving when the switch is activated.
- Reply
- Inaccurate
- Tyler C Staff on Sep 30, 2019
Vote for the best answer above!
Will this work for Wanhao I3 Plus?
A shopper
on Feb 7, 2020
BEST ANSWER: Thank you for your question.
These are made to work with out Maker Select V2 and Plus printers which are probably similar enough to the Wanhao i3 printers to be used properly.
These are made to work with out Maker Select V2 and Plus printers which are probably similar enough to the Wanhao i3 printers to be used properly.
- Reply
- Inaccurate
- Tyler C Staff on Feb 7, 2020
BEST ANSWER: Thank you for your question.
These are made to work with out Maker Select V2 and Plus printers which are probably similar enough to the Wanhao i3 printers to be used properly.
These are made to work with out Maker Select V2 and Plus printers which are probably similar enough to the Wanhao i3 printers to be used properly.
- Reply
- Inaccurate
- Tyler C Staff on Feb 7, 2020
Vote for the best answer above!
Will this work with MP select mini v2?
New User U
on Dec 11, 2020
BEST ANSWER: I don't have a mini v2, but this is a fairly standard setup, there may be too much wire though
- Reply(1)
- Inaccurate
- Marcus A T on Dec 12, 2020
- Purchased on Jul 29, 2020
But the JST connector will be the same and the switch compatible with the mini v2 you think?
- Reply
- New User U on Dec 12, 2020
BEST ANSWER: I don't have a mini v2, but this is a fairly standard setup, there may be too much wire though
- Reply(1)
- Inaccurate
- Marcus A T on Dec 12, 2020
- Purchased on Jul 29, 2020
But the JST connector will be the same and the switch compatible with the mini v2 you think?
- Reply
- New User U on Dec 12, 2020
Vote for the best answer above!
Been out of stock for a while now, any estimate on when there will be more?
Andres R
on Feb 20, 2021
Questions For Similar Products
Reviews
3.4 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
1
2
0
Rated 2 out of 5
Not the correct part. Not correct replacement for Maker Select V2
Title says it all. This may work with a bit of modification, or creative mounting, but it is NOT the right replacement end stop switch. It is bigger than the original and holes will not match up.
Monoprice - I am aware of the return policy and where to email if I desire. What I would like is for you to fix the misleading listing.
Monoprice - I am aware of the return policy and where to email if I desire. What I would like is for you to fix the misleading listing.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
December 21, 2020
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 2 out of 5
Wrong size
While I ended up using as my y stopper and moving the y to my z.
It's not the correct size for the model it says it is.
Originally I wanted to replace my z stopper but couldn't adjust it in anyway to make this one work.
It's not the correct size for the model it says it is.
Originally I wanted to replace my z stopper but couldn't adjust it in anyway to make this one work.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Response from Monoprice
Thank you for providing feedback. Sorry to hear about the issues you are having with our product. We do offer a 30 day return policy. If you would like to see what options are available for you, please feel free to E-mail us at support@monoprice.com.
September 3, 2020
Timothy D
Rated 5 out of 5
This was a replacement part for my printer. After installing it works like new
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 3 out of 5
Printer Unclear
I'm sure it works fine, but unfortunately is not the right part for a Maker Select Plus. I assumed, this being the only Y-axis endstop on Monoprice's website, and being titled "Monoprice Maker Select 3D Printer - Endstop Limit Switch," that it would work for the Maker Select Plus. I was incorrect. Three starts because I'm sure it works fine for the correct printer, but the description was not clear, and didn't list the printers for which this part was intended for.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Rated 5 out of 5
awesome
cant believe a 3 d printer for a dollar 50.Insane
- Was this review helpful? Yes (0) No (4)
- Flag as Inappropriate
October 3, 2018
- Was this review helpful? Yes (0) No (4)
- Flag as Inappropriate
Reviews for Similar Products