Monoprice EZ Series Full-Motion Articulating TV Wall Mount Bracket For TVs 37in to 70in, Max Weight 99 lbs, Extends from 2.0in to 17.5in, VESA Up to 600x400, Rotating , Concrete & Brick, UL Certified
Product # 10470
$79.99
Qty: 1
$79.99
Qty: 2-9
$78.99
Qty: 10-19
$76.99
Qty: 20-49
$74.99
Qty: 50+
$71.99
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 36 questions
Browse 36 questions
and 48 answers
Can this be used for 75 inch tv?
A shopper
on Dec 28, 2018
BEST ANSWER: Yes, if your TV is less than 99lbs. make sure the vesa will work too.
- Reply
- Inaccurate
- Dave L Staff on Dec 31, 2018
BEST ANSWER: Yes, if your TV is less than 99lbs. make sure the vesa will work too.
- Reply
- Inaccurate
- Dave L Staff on Dec 31, 2018
Although I am not qualified to give professional advice, having installed my 65” using this mount, I would say that this mount will support a 75” panel. There are two like mounts that differ only in the width of the wall mounting bracket. Because this is the narrower of two mounting brackets, I would consider how much you plan to articulate the arms and to what you are mounting this. If you build up the studs behind the mount or you are mounting to a sturdy surface, like stone, you’ll be fine. Otherwise, you might prefer the wider mount. These mounts are very well designed and constructed and come with excellent hardware. The fact that I am buying another one is the best evidence I have.
- Reply
- Inaccurate
- John G on May 25, 2019
- Purchased on Feb 13, 2018
While it is hard to be certain whether you can fit one, as long as it is within the weight and vesa parameters it should work fine. The only problems I could see are if it is abnormally deep. Keep in mind you will most likely lose some of the left/right or up/down tilt range because the extra width/height might cause the t.v. to hit the wall where a 70" t.v. should not. Also if it has a large bezel it might limit range of adjustment even more as the inch rating of the t.v. is measured diagonally across the screen and won't include the bezel.
- Reply
- Inaccurate
- Kenneth L on Dec 28, 2018
- Purchased on Feb 2, 2018
How heavy? I have a 42” plasma tv I used it for. No problems after a year
- Reply
- Inaccurate
- Kevin L on Dec 28, 2018
- Purchased on Dec 30, 2017
Yes. I am using one now . As long as your TV is under 100 pounds.
- Reply
- Inaccurate
- Shawn P on Dec 28, 2018
- Purchased on Feb 6, 2018
No, it cannot be used on a tv that large.
- Reply
- Inaccurate
- Gary O on Dec 28, 2018
- Purchased on Jan 30, 2018
Vote for the best answer above!
Is this a SINGLE STUD mount?
A shopper
on Oct 17, 2017
BEST ANSWER: Yes I mounted it with several bolts in one stud and it is full motion!
- Reply
- Inaccurate
- Brian B on Aug 1, 2018
- Purchased on Jul 17, 2018
BEST ANSWER: Yes I mounted it with several bolts in one stud and it is full motion!
- Reply
- Inaccurate
- Brian B on Aug 1, 2018
- Purchased on Jul 17, 2018
Yes, multiple bolt anchors all on the same wall stud.
- Reply
- Inaccurate
- Michael K on Oct 17, 2017
- Purchased on Nov 28, 2016
Vote for the best answer above!
is the level on this mount consistent? I.e. if the TV is level when pressed flat against the wall, will it still be level when pulled out? I've had mounts that are only level in one position.
Simon C
on Jan 13, 2018
BEST ANSWER: As long as you don’t twist the tv, and the mount was level when you installed it, the level will stay when the tv is moved. It really comes down to the initial install, and whether the TV was leveled when it was attached. The bracket does not have vertical give on either arm, regardless of position
- Reply
- Inaccurate
- Matt on Jan 13, 2018
- Purchased on Dec 14, 2016
BEST ANSWER: As long as you don’t twist the tv, and the mount was level when you installed it, the level will stay when the tv is moved. It really comes down to the initial install, and whether the TV was leveled when it was attached. The bracket does not have vertical give on either arm, regardless of position
- Reply
- Inaccurate
- Matt on Jan 13, 2018
- Purchased on Dec 14, 2016
As of today, I've had this mount for over a year,, and so far, my level has not changed. But I'm would say it depends on the TV. Mine is a 65 inch Vizio and the weight is more or less evenly distributed from top to bottom.
- Reply
- Inaccurate
- Roy on Jan 13, 2018
- Purchased on Mar 15, 2017
Hello. Yes the tv stays the same angle.
- Reply
- Inaccurate
- New User U on Jan 13, 2018
- Purchased on Mar 15, 2017
Vote for the best answer above!
Does it tilt?
A shopper
on Mar 28, 2020
BEST ANSWER: It tilts ( +/- 15 degrees) from vertical.
- Reply
- Inaccurate
- BryanOB on Mar 29, 2020
- Purchased on Feb 26, 2020
BEST ANSWER: It tilts ( +/- 15 degrees) from vertical.
- Reply
- Inaccurate
- BryanOB on Mar 29, 2020
- Purchased on Feb 26, 2020
Vote for the best answer above!
I want the TV to be several inches to one side of my nearest stud. Can the the TV be shifted sideways on the articulated arms? If so, how far? Or only in/out and swivel?
A shopper
on Jan 19, 2017
BEST ANSWER: That should be no problem. On my 60" HDTVs there is space on each side of the two vertical bars that mount to the TV. These can be loosened and slid laterally. Depending on the weight of the TV, and the amount the TV is moved to the side there could be some tilting of the tv. I'd think it would allow a few inches of lateral movement without problems, however. There are plenty of adjustments available. I just ordered another minutes ago.
- Reply
- Inaccurate
- ttiern on Jan 19, 2017
- Purchased on Jun 30, 2016
BEST ANSWER: That should be no problem. On my 60" HDTVs there is space on each side of the two vertical bars that mount to the TV. These can be loosened and slid laterally. Depending on the weight of the TV, and the amount the TV is moved to the side there could be some tilting of the tv. I'd think it would allow a few inches of lateral movement without problems, however. There are plenty of adjustments available. I just ordered another minutes ago.
- Reply
- Inaccurate
- ttiern on Jan 19, 2017
- Purchased on Jun 30, 2016
It can shift to either side, but would be off the wall approx 6" due to the two hinge points hitting their max stop, if you wanted it to be flat. The arms would form a box shape if you push it to either side for the offset you're looking for, which brings it off the wall.
- Reply
- Inaccurate
- David G on Jan 19, 2017
- Purchased on Jul 5, 2016
Vote for the best answer above!
can this be mounted to concrete or block?
New User U
on May 22, 2017
BEST ANSWER: I don't see any reason it couldn't be mounted to concrete or block as long as properly sized Tapcons or other concrete anchors are used. I have it mounted to wood and had the opportunity to frame more than a single stud behind the bracket but needless to say, I'm quite satisfied with the sturdiness of this bracket. It's been in use outside in FL for more than a year with no problems.
- Reply
- Inaccurate
- Brad K on May 22, 2017
- Purchased on May 25, 2016
BEST ANSWER: I don't see any reason it couldn't be mounted to concrete or block as long as properly sized Tapcons or other concrete anchors are used. I have it mounted to wood and had the opportunity to frame more than a single stud behind the bracket but needless to say, I'm quite satisfied with the sturdiness of this bracket. It's been in use outside in FL for more than a year with no problems.
- Reply
- Inaccurate
- Brad K on May 22, 2017
- Purchased on May 25, 2016
Yes. The broad selection of bolts, including lag bolts for mounting to studs, also includes plastic (nylon?) anchors for attaching the mounting plate to blocks or concrete.. There isn't anything I could suggest be added to mount this to any substantial structural component. It also includes templates for locating drill holes.
- Reply(1)
- Inaccurate
- ttiern on May 22, 2017
- Purchased on Jun 30, 2016
Excellent, thanks to you and to Brad K. I was thinking just to be safe I might use lead anchors instead of the plastic ones and then use the lag bolts. I agree with other users that sometimes even the right sized tap cons don't always "bite".
- Reply
- New User U on May 22, 2017
Vote for the best answer above!
how far from the wall will this unit extend if push back with no extension?
New User U
on Apr 22, 2019
BEST ANSWER: As the product title indicate "Extends from 2.0in to 17.5in". 2 inches is the minimum. extension.
- Reply
- Inaccurate
- Dave L Staff on Apr 22, 2019
BEST ANSWER: As the product title indicate "Extends from 2.0in to 17.5in". 2 inches is the minimum. extension.
- Reply
- Inaccurate
- Dave L Staff on Apr 22, 2019
depends on your tv if the mount is recessed or flat. ours sits about 1"1/2-2" from wall
- Reply
- Inaccurate
- Lonnie H on Apr 23, 2019
- Purchased on Aug 8, 2018
Vote for the best answer above!
Can this mount accommodate the Samsung 85" QLED 80T that weighs 95lb?
New User U
on Dec 7, 2020
BEST ANSWER: Stated max weight is 99 lbs, and the parts come with the set is pretty strong. I think the 70" size limit due to the short arm reduced swing angle by the width of the screen before hitting the wall. Not a problem if the big screen is mounted facing straight only.
- Reply
- Inaccurate
- Cheuk C on Dec 7, 2020
- Purchased on Jan 6, 2020
BEST ANSWER: Stated max weight is 99 lbs, and the parts come with the set is pretty strong. I think the 70" size limit due to the short arm reduced swing angle by the width of the screen before hitting the wall. Not a problem if the big screen is mounted facing straight only.
- Reply
- Inaccurate
- Cheuk C on Dec 7, 2020
- Purchased on Jan 6, 2020
The mount states it can. My application did not weigh 95#'s. It works well on my TV at 55#.
- Reply
- Inaccurate
- Loren Schrenk S on Dec 7, 2020
- Purchased on Mar 17, 2020
Vote for the best answer above!
What are the dimensions of the wall attachment base? Particularly the height?
A shopper
on Nov 26, 2016
BEST ANSWER: The footprint is approximately 13.5" x 6.5"
- Reply
- Inaccurate
- Brad K on Dec 5, 2016
- Purchased on May 25, 2016
BEST ANSWER: The footprint is approximately 13.5" x 6.5"
- Reply
- Inaccurate
- Brad K on Dec 5, 2016
- Purchased on May 25, 2016
Vote for the best answer above!
Is this mount (Product # 10470) ideal for placing in corners?
A shopper
on Nov 28, 2016
Monoprice EZ Series Full-Motion Articulating TV Wall Mount Bracket For TVs 37in to 70in, Max Weight 99 lbs, Extends from 2.0in to 17.5in, VESA Up to 600x400, Rotating , Concrete & Brick, UL Certified
Monoprice EZ Series Full-Motion Articulating TV Wall Mount Bracket For TVs 37in to 70in, Max Weight 99 lbs., Extension Range of 2.1in to 17.6in, VESA Patterns Up to 600x400, UL Certified
BEST ANSWER: Hello, these mounts are able to be corner placed. But we do have dedicated corner friendly mounts if you are looking for those. See this item, thank you!
http://www.monoprice.com/product?p_id=8586
http://www.monoprice.com/product?p_id=4562
http://www.monoprice.com/product?p_id=8586
http://www.monoprice.com/product?p_id=4562
- Reply
- Inaccurate
- Jericho L Staff on Dec 12, 2016
BEST ANSWER: Hello, these mounts are able to be corner placed. But we do have dedicated corner friendly mounts if you are looking for those. See this item, thank you!
http://www.monoprice.com/product?p_id=8586
http://www.monoprice.com/product?p_id=4562
http://www.monoprice.com/product?p_id=8586
http://www.monoprice.com/product?p_id=4562
- Reply
- Inaccurate
- Jericho L Staff on Dec 12, 2016
Vote for the best answer above!
Can the mount be flipped around 180 degrees; so the top is on the bottom and vise-a-versa?
A shopper
on Dec 15, 2016
BEST ANSWER: Hello, just to clarify, this item cannot be flipped 180 degrees as it only has a swivel range of 60 degrees. I hope this helps, thank you!
- Reply
- Inaccurate
- Jericho L Staff on Dec 28, 2016
BEST ANSWER: Hello, just to clarify, this item cannot be flipped 180 degrees as it only has a swivel range of 60 degrees. I hope this helps, thank you!
- Reply
- Inaccurate
- Jericho L Staff on Dec 28, 2016
Vote for the best answer above!
What's the length of the arm from wall to TV ?
A shopper
on Dec 21, 2016
BEST ANSWER: Hello, thank you for your question. The maximum extension as listed in the specifications is 17.5 inches, also the minimum extension is listed as 2 inches. I hope this helps, and of course if you have any more questions feel free to contact us!
- Reply
- Inaccurate
- Jeff M Staff on Jan 18, 2017
BEST ANSWER: Hello, thank you for your question. The maximum extension as listed in the specifications is 17.5 inches, also the minimum extension is listed as 2 inches. I hope this helps, and of course if you have any more questions feel free to contact us!
- Reply
- Inaccurate
- Jeff M Staff on Jan 18, 2017
Vote for the best answer above!
My mount holes, vertical, are 16 inches apart. Will this mount work? TV is 50 inches.
A shopper
on Jan 15, 2017
BEST ANSWER: To determine compatibility with a TV mount to your TV, please determine the VESA mounting pattern on the back of your TV. It is the 4 screw hole square formation on the back and it is usually listed on the TV specs or you can find out by measuring it yourself(measured in millimeters). Our TV mounts range from 50x50mm to 1000x700 and up so please check the TV mount specs for compatibility as well. I hope this helps, thank you!
- Reply
- Inaccurate
- Jericho L Staff on Jan 17, 2017
BEST ANSWER: To determine compatibility with a TV mount to your TV, please determine the VESA mounting pattern on the back of your TV. It is the 4 screw hole square formation on the back and it is usually listed on the TV specs or you can find out by measuring it yourself(measured in millimeters). Our TV mounts range from 50x50mm to 1000x700 and up so please check the TV mount specs for compatibility as well. I hope this helps, thank you!
- Reply
- Inaccurate
- Jericho L Staff on Jan 17, 2017
Vote for the best answer above!
What is the depth of the mount from the wall?
A shopper
on Jan 24, 2017
BEST ANSWER: As measured from the wall to the front of the mounting bracket: 2.75" compressed; 16.75" fully extended.
- Reply
- Inaccurate
- John O on Jan 25, 2017
- Purchased on Aug 26, 2016
BEST ANSWER: As measured from the wall to the front of the mounting bracket: 2.75" compressed; 16.75" fully extended.
- Reply
- Inaccurate
- John O on Jan 25, 2017
- Purchased on Aug 26, 2016
Vote for the best answer above!
Is there video instructions for mounting this?
sajeev r
on Feb 5, 2017
BEST ANSWER: Hello, thank you for your question, unfortunately we do not have any video mounting instructions. We recommend contacting a professional installer if you require assistance, I apologize for the inconvenience
- Reply
- Inaccurate
- Jeff M Staff on Feb 17, 2017
BEST ANSWER: Hello, thank you for your question, unfortunately we do not have any video mounting instructions. We recommend contacting a professional installer if you require assistance, I apologize for the inconvenience
- Reply
- Inaccurate
- Jeff M Staff on Feb 17, 2017
Vote for the best answer above!
Will this bracket work on a curved tv (specifically LG OLED55C6P)?
A shopper
on Mar 6, 2017
BEST ANSWER: Thank you for your question. This mount will be able to accommodate the 400x200mm VESA hole mounting pattern on your LG TV. It will also be able to hold the weight of the TV (29.1lbs w/o stand) just fine. Curved TV's typically require the use of the included spacers and some Curved TV's will include spacers for mounting purposes. I hope this helps.
- Reply
- Inaccurate
- Mark P Staff on Jun 13, 2017
BEST ANSWER: Thank you for your question. This mount will be able to accommodate the 400x200mm VESA hole mounting pattern on your LG TV. It will also be able to hold the weight of the TV (29.1lbs w/o stand) just fine. Curved TV's typically require the use of the included spacers and some Curved TV's will include spacers for mounting purposes. I hope this helps.
- Reply
- Inaccurate
- Mark P Staff on Jun 13, 2017
Vote for the best answer above!
Will this bracket work with a curved TV (specifically LG55OLEDC6P)? The vesa patterns are okay, I'm just not sure if the curve requires a special bracket.
Paul C
on Mar 6, 2017
BEST ANSWER: So long as it has a VESA that is compatible any mount will work with a curved TV.
However, you would likely have to use more of the included spacers go get everything to connect properly.
However, you would likely have to use more of the included spacers go get everything to connect properly.
- Reply
- Inaccurate
- Tyler C Staff on Feb 11, 2019
BEST ANSWER: So long as it has a VESA that is compatible any mount will work with a curved TV.
However, you would likely have to use more of the included spacers go get everything to connect properly.
However, you would likely have to use more of the included spacers go get everything to connect properly.
- Reply
- Inaccurate
- Tyler C Staff on Feb 11, 2019
Vote for the best answer above!
What is the difference between items 10469 and 10470? Load bearing capacity and compatible TV sizes appear to be the same. The only visual difference seems to be the shape of the piece that attaches to the wall.
Venkat I
on Apr 13, 2017
Monoprice EZ Series Full-Motion Articulating TV Wall Mount Bracket For TVs 37in to 70in, Max Weight 99 lbs, Extends from 2.0in to 17.5in, VESA Up to 600x400, Rotating , Concrete & Brick, UL Certified
Monoprice EZ Series Full-Motion Articulating TV Wall Mount Bracket For TVs 37in to 70in, Max Weight 99 lbs., Extension Range of 2.1in to 17.6in, VESA Patterns Up to 600x400, UL Certified
BEST ANSWER: Thank you for your question. You are correct, the only difference is the 10469 will mount to 2 studs in the wall and the 10470 will just mount to 1 stud on the wall.
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
https://www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
https://www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
- Reply
- Inaccurate
- Mark P Staff on May 18, 2017
BEST ANSWER: Thank you for your question. You are correct, the only difference is the 10469 will mount to 2 studs in the wall and the 10470 will just mount to 1 stud on the wall.
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
https://www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
https://www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
- Reply
- Inaccurate
- Mark P Staff on May 18, 2017
Vote for the best answer above!
I am intending on mounting this in my commercial office space. Does this have to mount to a stud/metal stud or can I mount this direct into the sheetrock? I was planning on using Wall Anchor screws/Auger Screws to mount this direct to sheetrock.
Jimmy L
on Apr 17, 2017
BEST ANSWER: This mount contains six good sized lag bolts (approximately 0.25" x 2.25", likely metric) with plastic wall anchors for drywall mounting. use them all as there will be a lot of weight hanging on the articulating arms. Both my TVs were fastened to studs, but I will bet that these anchors would work well.
I was impressed not only with the design, but with the engineering forethought that went into this mount. The mount came with about every type of fastener you could imagine you might possibly need, but most weren't needed. The designers covered all the bases.
I was impressed not only with the design, but with the engineering forethought that went into this mount. The mount came with about every type of fastener you could imagine you might possibly need, but most weren't needed. The designers covered all the bases.
- Reply
- Inaccurate
- ttiern on Apr 17, 2017
- Purchased on Jun 30, 2016
BEST ANSWER: This mount contains six good sized lag bolts (approximately 0.25" x 2.25", likely metric) with plastic wall anchors for drywall mounting. use them all as there will be a lot of weight hanging on the articulating arms. Both my TVs were fastened to studs, but I will bet that these anchors would work well.
I was impressed not only with the design, but with the engineering forethought that went into this mount. The mount came with about every type of fastener you could imagine you might possibly need, but most weren't needed. The designers covered all the bases.
I was impressed not only with the design, but with the engineering forethought that went into this mount. The mount came with about every type of fastener you could imagine you might possibly need, but most weren't needed. The designers covered all the bases.
- Reply
- Inaccurate
- ttiern on Apr 17, 2017
- Purchased on Jun 30, 2016
Vote for the best answer above!
It looks like from the pictures that when this mount is fully compressed against the wall it sits a little off center because it has to swing to one side. My question is do you have the option to swing either left OR right of center?
A shopper
on May 3, 2017
BEST ANSWER: Thank you for your question. Yes, you would be able to swing it to the left or the right.
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
- Reply
- Inaccurate
- Mark P Staff on Jun 8, 2017
BEST ANSWER: Thank you for your question. Yes, you would be able to swing it to the left or the right.
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
- Reply
- Inaccurate
- Mark P Staff on Jun 8, 2017
Vote for the best answer above!
My Samsung 55" VERSA is 400x400. If I understand correctly the VERSA of this mount at 600x400 works?
A shopper
on May 30, 2017
BEST ANSWER: Thank you for your question. Yes, this mount would fit your 400x400 VESA on your TV. Just be sure that the weight of your TV does not exceed the weight limit of 99 lbs.
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
- Reply
- Inaccurate
- Mark P Staff on Jun 6, 2017
BEST ANSWER: Thank you for your question. Yes, this mount would fit your 400x400 VESA on your TV. Just be sure that the weight of your TV does not exceed the weight limit of 99 lbs.
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
www.monoprice.com/help?pn=contact
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
- Reply
- Inaccurate
- Mark P Staff on Jun 6, 2017
Vote for the best answer above!
My question is I have an LG 75UJ6470 75 inch UHD 4K tv and weights 91 lbs. and will this mount work for it meaning will the mount bolt pattern matches those on back of the tv? Thanks!
A shopper
on Oct 17, 2017
BEST ANSWER: Thank you for your question.
That TV would likely be too heavy to work with this mount because its too close to the max weight but it would fit on the TV plate since your TV has a mounting hole patter of 600 x 400.
That TV would likely be too heavy to work with this mount because its too close to the max weight but it would fit on the TV plate since your TV has a mounting hole patter of 600 x 400.
- Reply
- Inaccurate
- Tyler C Staff on Jun 20, 2019
BEST ANSWER: Thank you for your question.
That TV would likely be too heavy to work with this mount because its too close to the max weight but it would fit on the TV plate since your TV has a mounting hole patter of 600 x 400.
That TV would likely be too heavy to work with this mount because its too close to the max weight but it would fit on the TV plate since your TV has a mounting hole patter of 600 x 400.
- Reply
- Inaccurate
- Tyler C Staff on Jun 20, 2019
Vote for the best answer above!
The center of the TV doesn't line up with a stud. Can I use this mount to adjust so the TV is in the center?
A shopper
on Nov 15, 2017
BEST ANSWER: You can mount it using some good drywall anchors. I have had three TVs mounted this way for several years and they’re rock solid.
- Reply
- Inaccurate
- Joseph Y on Nov 16, 2017
- Purchased on Dec 4, 2016
BEST ANSWER: You can mount it using some good drywall anchors. I have had three TVs mounted this way for several years and they’re rock solid.
- Reply
- Inaccurate
- Joseph Y on Nov 16, 2017
- Purchased on Dec 4, 2016
Vote for the best answer above!
The mounting holes on my television are near the bottom of the TV. I am concerned that the vertical arms of this mount will extend beyond the bottom of the television and be visible to viewers. Can the position of the vertical arms be adjusted?
A shopper
on Nov 16, 2017
BEST ANSWER: Thank you for your question.
That all depends on what your TV's VESA pattern it.
You might be able to place the arms for this mount in a position where they cannot be seen if its small enough on the y-axis.
That all depends on what your TV's VESA pattern it.
You might be able to place the arms for this mount in a position where they cannot be seen if its small enough on the y-axis.
- Reply
- Inaccurate
- Tyler C Staff on Jun 21, 2019
BEST ANSWER: Thank you for your question.
That all depends on what your TV's VESA pattern it.
You might be able to place the arms for this mount in a position where they cannot be seen if its small enough on the y-axis.
That all depends on what your TV's VESA pattern it.
You might be able to place the arms for this mount in a position where they cannot be seen if its small enough on the y-axis.
- Reply
- Inaccurate
- Tyler C Staff on Jun 21, 2019
Vote for the best answer above!
What are the dimensions of the wall plate? A previous answer says 6.5" wide, but that is much wider than a single stud.
Jeff C
on Aug 30, 2018
BEST ANSWER: Thank you for your question.
You can find the dimensions of the wall plate in the dimensional diagram: https://downloads.monoprice.com/files/diagrams/10470_Diagram_170918.pdf
You can find the dimensions of the wall plate in the dimensional diagram: https://downloads.monoprice.com/files/diagrams/10470_Diagram_170918.pdf
- Reply
- Inaccurate
- Tyler C Staff on Jul 31, 2019
BEST ANSWER: Thank you for your question.
You can find the dimensions of the wall plate in the dimensional diagram: https://downloads.monoprice.com/files/diagrams/10470_Diagram_170918.pdf
You can find the dimensions of the wall plate in the dimensional diagram: https://downloads.monoprice.com/files/diagrams/10470_Diagram_170918.pdf
- Reply
- Inaccurate
- Tyler C Staff on Jul 31, 2019
Vote for the best answer above!
I am confused:) The product description suggests the mount compresses to 2 inches from the wall, but one of the answers below notes that the distance from the wall to the front of the bracket is 2.75". What is the smallest possible distance from the wall to the front of the backet? I ask because I have a shallow niche into which I am trying to fit my TV and need to calculate the smallest bracket depth + the TV depth. Thanks!
Robert O
on Nov 20, 2018
BEST ANSWER: Dimensional Diagram show minimum distance is 50mm = 1.97".
- Reply
- Inaccurate
- Dave L Staff on Nov 21, 2018
BEST ANSWER: Dimensional Diagram show minimum distance is 50mm = 1.97".
- Reply
- Inaccurate
- Dave L Staff on Nov 21, 2018
Vote for the best answer above!
Does it rotate the TV to the left and right? I need the TV to pull out from the wall and to turn at least 60 degrees to the left to face the couch.
New User U
on May 16, 2019
BEST ANSWER: This mount can swivel left and right +/-60 degrees and extend out up to 17.5 inches
- Reply
- Inaccurate
- Michelle M Staff on May 17, 2019
BEST ANSWER: This mount can swivel left and right +/-60 degrees and extend out up to 17.5 inches
- Reply
- Inaccurate
- Michelle M Staff on May 17, 2019
Vote for the best answer above!
What are the overall width dimensions of the articulating arms when the tv is pushed up against the wall? This is mounting on a fireplace with a stone overlay and I want to leave an empty space w/o stone, so the mounting bracket is completely hidden in the recess.
A shopper
on May 24, 2019
BEST ANSWER: Thank you for your question.
Unfortunately we would not have an official measurement for that but from the information we do have the widest this would be on your wall would be about 640mm (25.20").
Unfortunately we would not have an official measurement for that but from the information we do have the widest this would be on your wall would be about 640mm (25.20").
- Reply
- Inaccurate
- Tyler C Staff on Jun 5, 2019
BEST ANSWER: Thank you for your question.
Unfortunately we would not have an official measurement for that but from the information we do have the widest this would be on your wall would be about 640mm (25.20").
Unfortunately we would not have an official measurement for that but from the information we do have the widest this would be on your wall would be about 640mm (25.20").
- Reply
- Inaccurate
- Tyler C Staff on Jun 5, 2019
Vote for the best answer above!
Can you get a speaker bar mount adapter for this TV wall mount? The bar speaker would mount below the TV.
New User U
on Aug 1, 2019
BEST ANSWER: I purchased this from Amazon and made it work easily.
WALI Universal Sound Bar Mount Bracket for Mounting Above or Under TV, Fits 32 to 70 inch TVs, 33 lbs. Weight Capacity (SBR201), Black
WALI Universal Sound Bar Mount Bracket for Mounting Above or Under TV, Fits 32 to 70 inch TVs, 33 lbs. Weight Capacity (SBR201), Black
- Reply
- Inaccurate
- Christopher H on Aug 2, 2019
- Purchased on Sep 18, 2018
BEST ANSWER: I purchased this from Amazon and made it work easily.
WALI Universal Sound Bar Mount Bracket for Mounting Above or Under TV, Fits 32 to 70 inch TVs, 33 lbs. Weight Capacity (SBR201), Black
WALI Universal Sound Bar Mount Bracket for Mounting Above or Under TV, Fits 32 to 70 inch TVs, 33 lbs. Weight Capacity (SBR201), Black
- Reply
- Inaccurate
- Christopher H on Aug 2, 2019
- Purchased on Sep 18, 2018
Vote for the best answer above!
how much does mount weigh? my tv is 79 lbs. will this mount support it
FRANK M
on Sep 8, 2019
BEST ANSWER: Thank you for your question.
This mount would weigh 21.54lbs.
As long as your TV VESA pattern would be within this mounts range it would work for this TV.
This mount would weigh 21.54lbs.
As long as your TV VESA pattern would be within this mounts range it would work for this TV.
- Reply
- Inaccurate
- Tyler C Staff on Sep 10, 2019
BEST ANSWER: Thank you for your question.
This mount would weigh 21.54lbs.
As long as your TV VESA pattern would be within this mounts range it would work for this TV.
This mount would weigh 21.54lbs.
As long as your TV VESA pattern would be within this mounts range it would work for this TV.
- Reply
- Inaccurate
- Tyler C Staff on Sep 10, 2019
Vote for the best answer above!
Questions For Similar Products
Reviews
4.8 / 5.0
113 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
96
15
1
1
0
Rated 5 out of 5
Good product
Easy install and works exactly as advertised. Great mount and worth the money.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Holds well on 1 stud
Concerned about stability and strength on one stud, but it worked great and holds well. Haven't moved it around a ton yet, but when I have it was very sturdy.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Seems nice so far but would like to have some help with where the wall part of the bracket is in relation to the center of the back of tv bracket
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Sleek one stud mount
It was perfect for my application on a single stud works perfectly great product
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
No issue or surprises very solid mount
No issue or surprises very solid mount
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
The mount was fine all around except the few plastic pieces were easy to fall off while installing. They could use a better fastening clip
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Great mount for our 65 inch TV
The TV wall mount works well for us. I thought a better explanation video would have been helpful. The pictorial instructions were a little ambiguous.
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Rated 3 out of 5
Works as depicted
Serves its purpose. It was not that easy to adjust the vertical support brackets on the horizontal aluminum braces. The supports bound and didn't slide well. Not the end of the world since I really only need to make it work one time. Or maybe again when I get a new TV. Overall satisfied and would recommend it. I have a 40" TV now and this mount will accept to a 71" TV which is one of the reasons I purchased it. The other and main reason was the single vertical mount to the wall as that is all the space I had to mount between 2 window openings.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Love the Moniprice TV Wall Mount
I bought this wall mount amid the plethora of choices, with two requirements.
The first requirement was that it had to be sturdy, particularly when fully extended. I didn't notice any instability or wobble when the TV was handled.
The other requirement was having provisions on which to mount a LED light strip framework, as shown in the photos. I used the same slots in the two horizontal rails that supported the vertical VESA mounting bars and the TV attachment bracket.
The slots accommodated square nuts (M6 x 10mm x 5mm thick). However, I couldn't locate those nuts in my local hardware stores, so I used square (1/4" x 20) nuts, but with dimensions (5mm thick x 11mm), I therefore filed two parallel sides to bring the height within tolerance (10mm).
For the lighting, I used the GOVEE Smart WiFi LED Strip Lights, which I controlled from the smartphone or the included switch panel.
The first requirement was that it had to be sturdy, particularly when fully extended. I didn't notice any instability or wobble when the TV was handled.
The other requirement was having provisions on which to mount a LED light strip framework, as shown in the photos. I used the same slots in the two horizontal rails that supported the vertical VESA mounting bars and the TV attachment bracket.
The slots accommodated square nuts (M6 x 10mm x 5mm thick). However, I couldn't locate those nuts in my local hardware stores, so I used square (1/4" x 20) nuts, but with dimensions (5mm thick x 11mm), I therefore filed two parallel sides to bring the height within tolerance (10mm).
For the lighting, I used the GOVEE Smart WiFi LED Strip Lights, which I controlled from the smartphone or the included switch panel.
- Was this review helpful? Yes (1) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (1)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products