Z Wave Plus Door and Window Sensor, No Logo
    Product # 24259
    $24.99
    In Stock This item will ship on 9/25/2017 if ordered within 2 days 15 hours 17 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $24.99
    Qty: 2-9 $23.99
    Qty: 10-19 $21.99
    Qty: 20-49 $20.99
    Qty: 50+ $17.99

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Z Wave Plus Door and Window Sensor, No Logo

    This Z-Wave Plus® Door/Window Sensor mounts to a door or window, detects when it is opened or closed, and sends a Z-Wave trigger signal to the network. It also has a tamper-proof switch, which will trigger a Z-Wave signal when the sensor's cover is removed. These trigger signals can be used to activate various other devices and perform preprogrammed tasks. When the sensor is included into a secured Z-Wave network, all communications will be encrypted using AES encryption.

    Features:

    • Detects when a door or window is opened
    • Tamper sensor sends an alert to the controller if the sensor is tampered with
    • Uses the latest backward compatible revision of Z-Wave® technology
    • Up to 1 year battery life
    • Z-Wave Plus® provides 50% more power than previous generations
    • Z-Wave Plus provides 67% improvement in transmission range
    • Z-Wave Plus offers Plug-n-Play inclusion network wide
    • Compatible with SmartThings™, Vera™, HomeSeer™, and Zipato®


    Support Files:



    Z-Wave® and Z-Wave Plus® are registered trademarks of Sigma Designs and its subsidiaries in the United States and other countries.

    SmartThings™ is a trademark of Samsung Electronics Co., Ltd.

    Vera™ is a trademark of Vera Control, Ltd.

    HOMESEER™ is a trademark and brand of HOMESEER TECHNOLOGIES, LLC.

    Zipato® is a registered trademark of Tri plus grupa d.o.o.




     
    Model 24259
    Radio Protocol Z-Wave®
    Radio Frequency 908.42 MHz
    Power Source 2x AAA batteries (available separately)
    Operating Current about 60mA
    Standby Current about 30µA
    Outdoor Range > 328 feet (100 meters)
    Indoor Range about 98 feet (30 meters)
    Operating Temperature +32 ~ +104°F (0 ~ +40°C)
    Storage Temperature +14 ~ +122°F (-10 ~ +50°C)
    Storage Humidity 0 ~ 90% RH, non-condensing
    Sensor Dimensions 3.0" x 1.1" x 0.7" (75 x 28 x 18 mm)
    Magnet Dimensions 3.0" x 0.5" x 0.7" (75 x 12 x 18 mm)
     

     
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 17 questions Browse 17 questions and 14 answers
    Is this product wink compatible?
    Dallas K on Jul 5, 2017
    BEST ANSWER: Does this work with wink yet?
    How does this compare to the other Door/Window Sensor? What are the differences?
    Brian P on Jul 5, 2017
    BEST ANSWER: This product is very similar to our other one, with just a different form factor
    Thanks
    From SmartThings, can you tell if the door/window is open or closed? In other words, does it just alert when there is a state changed or can a ask it if it's open/closed? Thanks!
    A shopper on Aug 4, 2017
    Can this be used outdoors?
    Terry L on Jul 5, 2017
    BEST ANSWER: This product is meant for indoor use
    Thanks
    Is this compatible with Vivint?
    Keven G on Jul 6, 2017
    BEST ANSWER: Only sensors sold by Vivint or 3rd party platforms that they have published partnerships/integrations with are compatible with the Vivint ecosystem.
    Is this compatile with the honeywell Vista 20ip wireless burg panels ?
    A shopper on Jul 4, 2017
    BEST ANSWER: At this time it is not
    Thanks
    Is this compatible with SmartThings?
    Phil G on Jul 5, 2017
    BEST ANSWER: Yes, this is compatible with SmartThings
    Thanks
    Does it have Internal dry contacts? Would like to wire Reed switch to it.
    Priya A on Aug 2, 2017
    Can you paint these sensors?
    A shopper on Aug 4, 2017
    Does anyone know how to get this to work on smarrthings? Says inactive when connected. No smartapps seem to work with it either.
    Lynn-Kai C on Aug 4, 2017
    BEST ANSWER: I had issues with this too until I added the device as secure. I read the instructions and there are two methods, unsecure and secure. Here's the steps I went through and I successfully added 5 devices.

    1) Stand about 1 ft from the smartthings HUB
    2) From your phone Add a device.
    3) While the phone is searching for the device, press and hold the little black button for 3 seconds.
    4) The sensor light will flash and your phone will detect the device.

    Thanks

    Morgan
    Can this be wired to an external sensor or magnet?
    A shopper on Aug 20, 2017
    BEST ANSWER: No, not without breaking it apart and soldering to the board
    Cannot pair with Smartthings. Any help?
    Viet H on Aug 4, 2017
    BEST ANSWER: I had issues with this too until I added the device as secure. I read the instructions and there are two methods, unsecure and secure. Here's the steps I went through and I successfully added 5 devices.

    1) Stand about 1 ft from the smartthings HUB
    2) From your phone Add a device.
    3) While the phone is searching for the device, press and hold the little black button for 3 seconds.
    4) The sensor light will flash and your phone will detect the device.

    Thanks

    Morgan
    Does this work with Nexia?
    A shopper on Jul 26, 2017
    BEST ANSWER: I have mine synced with Smartthings and it works like a charm. Nexia should work as well.
    Added to Smarthings and it always shows INACTIVE status, not OPEN/CLOSED?
    Wenfeng L on Sep 23, 2017
    will this work with Piper?
    A shopper on Sep 16, 2017
    Does it work with Wink hub?
    A shopper on Sep 1, 2017
    Does his work with wink yet?
    New User U on Aug 28, 2017
    5.0 / 5.0
    6 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Stars
    6
    0
    0
    0
    0
    Works perfect with Vera Pus
    I installed it at location about 50 feet away from Vera and it included with no problems. Works flawlessly ever since.
    July 26, 2017
    Purchased
    2 months ago
    Got 5 for Smartthings
    Works good so far. Takes AAA batteries which is a plus. No more watch batteries.
    August 4, 2017
    Purchased
    2 months ago
    Works great with Home Assistant
    I purchased and added over a dozen of these door/window sensors about a month ago. Adding them to Home Assistant (in secure mode) was easy. These sensors each report status changes quickly (within a second).

    The only issue I've had so far is regarding the tamper switch. A couple sensors didn't seem to have the tamper switch extend far enough when using the tape that came with the sensors, so as a result, were always in the "tamper" status. Probably could have exchanged for other sensor with monoprice, but it was simple enough to take some of the extra tape to "extend" the tamper switch, so it ended up not being a big deal.
    September 4, 2017
    Purchased
    1 month ago
    Works very well!
    I'm using this with Home Assistant and a USB Z-Wave gateway. It connects easily and communicates simply enough.

    I would like it more if it didn't show up as 3-4 different sensors (where only one changes value), but I'm sure theres a way around that, I just haven't looked for it yet.

    This sensor works incredibly well and has almost instant reaction time. I start opening the door and the lights on on before I can even go through it.

    Very happy with this purchase.
    September 19, 2017
    Purchased
    1 month ago
    Not a bad little sensor
    Not a bad little sensor. Connected easily with Smartthings and is quite responsive
    July 27, 2017
    Purchased
    2 months ago
    Great Door opened/closed detection device.
    Works great and I love how it interacts with my SmartThings Hub.
    August 28, 2017
    Purchased
    1 month ago

    Related Categories

    In Stock This item will ship on 9/25/2017 if ordered within 2 days 15 hours 17 minutes
    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART