Volume Pricing (Log In to see Member Pricing)
Z-Wave Plus Smart Plug and Repeater with 2 USB Ports (Works with Alexa & Google Home with Hub)
Z-Wave Plus PIR Motion Detector with Temperature Sensor, NO LOGO
This passive infrared (PIR) sensor detects motion and sends a Z-Wave® trigger signal to the network. It also detects changes in temperatures and reports the temperature to the network whenever a significant change has occurred. It also has a tamper-proof switch, which will trigger a Z-Wave signal when the cover is removed. These trigger signals can be used to activate various other devices and perform preprogrammed tasks. When the sensor is included into a secured Z-Wave network, all communications will be encrypted using AES encryption.
Motion Detection: This device uses a passive infrared sensor and sends a Z-Wave Plus® signal when motion is detected within its detection range. It can detect moving objects within line of sight at distances up to 32 feet, away with a field of view up to 120° This trigger signal can then be used to activate various other devices and perform preprogrammed tasks.
Temperature Sensor: This sensor detects changes in temperature and reports the temperature to the network whenever a significant change has occurred.
Z-Wave Plus: Z-Wave Plus® devices act as signal repeaters for the Z-Wave Plus network, so multiple devices result in more possible transmission routes, which helps eliminate RF "dead spots" in the network. Any Z-Wave Plus enabled device displaying the Z-Wave Plus logo can be used with Z-Wave Plus devices from other manufacturers.
Easy to Install: This sensor comes with everything you need to install it into an existing Z-Wave Plus network, including mounting screws, adhesive tape and a battery.
Z-Wave Plus is a low power mesh networking communications technology that allows Z-Wave Plus enabled devices to communicate with each other and to distribute Z-Wave Plus messages throughout the network.
Z-Wave Plus products are fully backward compatible with classic Z-Wave products. Z-Wave Plus has longer battery life, faster operation, better RF coverage, and easier installation.
RBoy Apps Compatibility
This Monoprice Z-Wave® product supports the Smart Apps iOS® and Android™ applications developed by RBoy Apps (http://www.rboyapps.com). Smart Apps and the accompanying Device Handlers work in combination with the Samsung SmartThings™ hub to interact with devices around your home, such as this and the other Z-Wave devices we sell.
- Allows Monoprice Smart Home products to work with SmartThings. (Not all devices are currently supported by the platform).
- Allows SmartThings to automatically recognize new devices and select the correct device handlers
- Allows users to access/utilize all of the device functions (e.g. multi-function sensors)
- Allows users to configure the advanced parameters for the devices
- Creates a user friendly interface for the SmartThings platform for Monoprice Smart Home products
- RBoy Apps allows users to create a hands free automation environment that's customized to their needs
- RBoy Apps allows multiple Monoprice Smart Home products to come together to create a whole home automation experience (one-stop-shop)
*RBoy Apps is an optional add-on and would require a subscription fee to activate.
- 1x Z-Wave Plus PIR Motion Sensor
- 1x CR123A Lithium Batteryt
- 1x Mounting Bracket
- 1x Adhesive Tape
- 2x Mounting Screws
- 1x User's Manual
Monoprice not only stands behind every product we sell with a 1 year replacement warranty, we offer a 30-day money back guarantee as well! If the product you purchase does not satisfy your needs, send it back for a full refund.
Quality at a Fair Price
Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
Service & Support
You're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after the sale. Contact our technical support team for questions about our products, troubleshooting, or even suggestions for products to fit your particular needs. Not to be outdone, our friendly and helpful customer service team is here to make your ordering, delivery, and any possible returns a quick and painless operation, from start to finish!
Z-Wave® and Z-Wave Plus® are registered trademarks of Sigma Designs and its subsidiaries in the United States and other countries.
SmartThings™ is a trademark of Samsung Electronics Co., Ltd.
Questions and Answers
Our knowledgeable Technical Support staff would be more than happy to assist.
It has to be integrated with a home automation system with zwave and the system should be able to connect to Alexa.
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
Once paired the motion and temperature sensors worked well. There are adjustments for sensitivity settings, but they are currently not available in the SmartThings app.
PROS: + Z-wave plus
+ integrated temperature monitor
+ Mounting bracket works in corners and on flat surfaces
CONS: - Has jumper posts for different sensitivities to avoid activation by pets, but does not include necessary jumper or description of jumper settings. After pairing, sensitivity settings were not present in SmartThings app and therefore could not be adjusted programmatically.
- Pairing description was confusing because did not pair when pairing button pressed 1x. Had to press 10x in quick succession before device paired with SmartThings v2 hub.
- Manual describes updating firmware, but does not include instruction on how to make the update occur with SmartThings or other Z-wave hub. This may be a Z-Wave Plus feature that is still in the works for SmartThings.
1 year ago
One of my devices -- the inside one oddly -- stopped responding. I took it down, and pressed the include / exclude button for 30 seconds, thinking it might reset. Whatever that did it solved the problem -- device re-included without any further action required on my part. So, try that if you have a non-responding item.
What can I say: good price, works well. Highly recommended.
Installation was easy using the screws (or double-stick tape) provided. I may buy a second one for the same area just to improve reaction time as there is no ideal location to cover both bays and the rear/side doors. Still experimenting with it as a general room occupancy detector - the wide 120 degree range should be good for this.
1 year ago
1 year ago
Here are the default configuration parameters:
Parameter 1 3 motion reset time (minutes)
Parameter 2 0 0 = celsius 1 = fahrenheit
Parameter 3 4 motion sensitivity
Parameter 4 0 Temperature offset
Parameter 5 2 Temperature report +/- change
First I changed Parameter 5 to 1 and sure enough, the device started reporting after 1.8 degree of change. Next I changed Parameter 2 to 1. Now it reports after 1 degree of change. Vera Plus is smart enough to know the device is now reporting in Fahrenheit so no conversion is needed.
Great value. I'm planning on getting more of these devices.
2 months ago
8 months ago
1 year ago
1 week ago