Volume Pricing (Log In to see Member Pricing)
Weatherproof Hard Case with Wheels and Customizable Foam, 26" x 20" x 14"
Provide IP67 level dust and water protection for audio equipment or display monitors using this customizable Weatherproof Hard Case from Monoprice!
The IP, or Ingress Protection, rating is a two digit value that indicates the level of protection provided by the cases. The IP67 rating of this case means that it provides complete protection against dust and other solid particles and that it can withstand up to 30 minutes of submersion in water at up to 1 meter depth.
The case is constructed of impact and ultraviolet resistant polypropylene and has a fully customizable foam interior for superior shock protection. A pressure relief valve allows you to slowly and safely equalize the pressure inside and out.
This case features a pair of 2.3" heavy-duty wheels and an extendable, locking handle, which allows you to roll the load. The handle extends about 13", resulting in the top of the handle being about 38" off the floor when the case is standing on its side. Additionally, it has full load handles on each side so two people can carry the load.
- Designed and developed to the comply with the highest safety protection standards
- Waterproof up to 1 meter depth for 30 minutes
- Shockproof design with fully customizable foam interior
- Total protection against dust and other solid material
- Ultraviolet and impact resistant material
- Manual pressure relief valve allows for gradual pressure equalization
- Seal design provides IP67 level protection
- 2.3" heavy-duty wheels and extendable handle for easy portability
- Full load handles on each side so two people can carry the load
- Customizable name plate
- 7mm diameter lock holes
- -40 ~ +194°F (-40 ~ +90°C) operating temperature
- 5016 cu in (82.21 liter) internal volume
- 183.42 lbs (83.2 kg) maximum buoyancy
- 26.38" x 20.00" x 13.98" (670 x 508 x 355 mm) external dimensions
- 22.99" x 17.40" x 12.95" (584 x 442 x 329 mm) internal dimensions
- Weighs only 24.07 lbs (10.92 kg)
PROS: Price, Quality of exterior
CONS: Foam is flimsy and won't protect my gear, handle configuration takes away from available inside space.
PROS: exterior measurements correct, not item in picture but solid one piece style handle :(
layers of 3" thick pick foam!
CONS: not as described. (See handle issue) actual weight 29lbs EMPTY
Thank you for your review on PID 12184. If possible, can you send me pictures that show the handle difference you described? Please let me know as I will be forwarding this along to be addressed. My apologies for the trouble and thank you in advance!
Tech Support Associate
Hard case arrived as advertised and in a cardboard box, no foam, bubble wrap, etc. In actuality extra packaging isn’t really needed for this item since it is meant to withstand “rough” handling, shipping and travel use. The case is solid and heavy duty, I did not notice any dust sticking to surface. It is shockproof and water proof (to an extent up to 1 meter). It comes with a customizable name plate that I have yet to send out to add my gaming handle to, but could be useful. There are four latches one on each side and two on the front, they all have two mounting options for TSA locks if you were to use this case as check in luggage or ship out. Tip: Open the valve when traveling via aircraft to allow pressure changes through the valve and close it while traveling on water. Material of pins used for handles and lid is stainless steel. The heavy duty wheels handled different surfaces very well, especially pavement and gravel, very little wear and tear is visible. The extended handle has a bit of wobble to it, but has no problem pulling case and its content(s). Hard case came with four layers of customizable foam. Each layer is approximately 3 inches deep, you can pick and pluck different areas (individually) out to custom fit your hardware. However I wish that each layer of foam had a mid-section for when you do not need to pick the entire 3 inches out for smaller items. Per description this hard case is meant for audio equipment and monitor(s), but I used to carry my SFF PC build. The case is a Fractal Design Node 304 (Case dimensions (W x H x D): 250 x 210 x 374 mm) and I was able to place my keyboard, mouse, webcam and UBS hub along the sides as well. I used this case during two different LAN events: one at Fort Wayne, IN and the other at Portland, OR. I drove to both events and had the case in the trunk of my vehicle. All of my hardware and peripherals were very well protected during my travels without any damages and functioned properly every time. Please take into consideration the weight of the case itself before placing any items in it since it is a bit heavy by itself, interior dimensions are slightly smaller form exterior ones and that item(s) need to have at least a layer in between for protection. I am beyond satisfied with this hard case and intend to purchase a smaller version for other purposes.
PROS: Durable, great build quality and competitive MSRP price. Available directly from vendor.
CONS: No replacement availability for customizable foam from Monoprice at the moment. Customizable foam has no middle layer option for when you only need to pluck half way through vs plucking entire foam piece.
To my surprise the hard case was solid from a construction stand point and delivered when they said it would be. They get 5 starts from me!
2 months ago