Volume Pricing (Log In to see Member Pricing)
Weatherproof Hard Case with Customizable Foam, 10" x 9" x 7"
Provide IP67 level dust and water protection for action cameras, camera bodies and lenses, or ammunition using this customizable Weatherproof Hard Case from Monoprice!
The IP, or Ingress Protection, rating is a two digit value that indicates the level of protection provided by the cases. The IP67 rating of this case means that it provides complete protection against dust and other solid particles and that it can withstand up to 30 minutes of submersion in water at up to 1 meter depth.
The case is constructed of impact and ultraviolet resistant polypropylene and has a fully customizable foam interior for superior shock protection. A pressure relief valve allows you to slowly and safely equalize the pressure inside and out.
- Designed and developed to the comply with the highest safety protection standards
- Waterproof up to 1 meter depth for 30 minutes
- Shockproof design with fully customizable foam interior
- Total protection against dust and other solid material
- Ultraviolet and impact resistant material
- Pressure relief valve allows for gradual pressure equalization
- Seal design provides IP67 level protection
- Ergonomic, rubber covered handle
- -40 ~ +194°F (-40 ~ +90°C) operating temperature
- 400 cu in (6.57 liter) internal volume
- 14.0 lbs (6.38 Kg) maximum buoyancy
- 10.63" x 9.09" x 7.28" (270 x 231 x 185 mm) external dimensions
- 9.57" x 7.17" x 6.18" (243 x 182 x 157 mm) internal dimensions
- Weighs only 3.1 lbs (1.4 Kg)
PROS: I purchased these as an option alternative to a traditional "ammo can". I use these to store and transport ammo. I comparison to my other cases which are BOYT, I have to say I am very impressed. The foam that is included is set up in multiple layers and would be very easily customization for any type of equipment. The handles are sturdy and the clasps are tight fitting.
CONS: The one only gripe I have, and this one just blows my mind on how they designed such a good case and didn't see the importance of this. The top and bottoms do not interlock for secure stacking. In fact they are actually opposite of secure. Its like the person that designed the top and the bottom didn't get along on purpose. I own 12 of these. I bought 7 at first and was highly depressed when I got them loaded and started to stack them and noticed they were not secure...I wouldn't say I would recommend against them, but I would rethink my project if I would have known they did not stack well. My only con, but it does bother me.
PROS: Tough plastic, strong latches, nice rubber gasket and foam.
CONS: The only thing I can think to gripe about is that the pluck foam is only perforated vertically, which means that when you pull segments out, they pull from the entire height of the foam block. This means that you can't form the foam in varying depths throughout the block.
PROS: Deeper case than most in this size range
Reasonable price makes protecting your medium cost items practical.
Rubber coated handle is nice
CONS: Latches a bit hard to open and close
Sealing surface not as robust as the high priced cases
Manual vent valve, must remember to close
Bottom feet do not stack with another same size case
PROS: Seems to be tough as nails. Good atmospheric seal.
CONS: Harder to close than I expected but I think that might be a good thing and it can be hacked to be easier with a file if that's your druthers.
PROS: Strong, very protective, measures as described
CONS: Latches start out a bit tight but seem to break in well with use (not a big issue)
PROS: Airtight, durable, black
CONS: foam is thicker than pictured
PROS: Airtight, waterproof, solid build, sturdy snap latches.
PROS: Heavy Duty
PROS: -Pick and pluck foam is oddly satisfying.
-Customizable for your gear
-Sturdy, rugged, and durable.
-The case sits evenly with lid up or handle up on its side.
-Perfect for a few small microphones, camera gear, external hard drives, cables, etc. My pair of small condenser monoprice microphones 600700 fit perfectly stacked in a 1" wide on the top layer of foam.
-Already looking for reasons to buy another
CONS: -I glued the foam to the case interior once I had everything set in place. Occasionally, the foam would want to come up with the object placed in it, if it was a tight fit.
-Not necessarily a con, but after opening the case, I took off the Monoprice sticker. It seemed to be peeling up at one edge. I'll sport the brand as much as I can, but the lid without a sticker was a perfect space for my name stenciled on it.
-There isn't any documentation with the item. It's pretty straight-forward, but I had to do some research on how to use the air pressure valve. There isn't info on how many or how deep the foam pieces are. A basic document with dimensions and how-to guide would be more advantageous than the random allergy medicine, wine subscription, and meal delivery samples included in the box.
-The way the case is designed doesn't look like it can be stackable with others.
PROS: Good value, rugged.
CONS: I cannot fault this product.