If you are visually impaired and are having difficulty navigating this site, please call our Customer Support line via our toll free number 1 (877) 271-2592.
    Stage Right by Monoprice 10-watt x 9 LED Flat PAR Stage Light (RGBW)
    Product # 612749
    Pack Size:
    1 Pack 4 Pack
    In Stock This item should ship today (9/24/2018) if ordered within 5 hours 3 minutes
    In Store Availability

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $59.99
    Qty: 2-9 $59.99
    Qty: 10-19 $59.99
    Qty: 20-49 $59.99
    Qty: 50+ $59.99

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business


    Input Voltage 90 ~ 240 VAC, 50/60 Hz
    Maximum Power Consumption 90 watts
    Lamp Type 9x 10-watt RGBW 4-in-1 LEDs
    Control Modes Stand Alone, Sound Activated, DMX-512, Master/Slave
    DMX Channels 8
    Dimensions 9.8" x 3.9" x 9.8" (250 x 100 x 250 mm)
    Net Weight 2.6 lbs. (1.2 kg)

    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 13 questions Browse 13 questions and 43 answers
    Whats the beam angle on this fixture?
    Nathan D on Mar 2, 2017
    BEST ANSWER: I would say it 's close to a 36 deg beam spread
    How do these compare to Product # 612749, the Stage Right by Monoprice 10-watt x 9 LED Flat PAR Stage Light (RGBW)?
    Michael Y on Jul 30, 2018
    Stage Right by Monoprice 10-watt x 9 LED Flat PAR Stage Light (RGBW)
    Stage Right by Monoprice 10-watt x 9 LED Flat PAR Stage Light (RGBW)
    Stage Right by Monoprice Truss Wash Up Light 3 Watt x 3 LED PAR Light with IR (RGB)
    Stage Right by Monoprice Truss Wash Up Light 3 Watt x 3 LED PAR Light with IR (RGB)
    BEST ANSWER: The fixtures have different purposes. I recently purchased a TRUSST Goal Post truss system. I use four of these truss wash lights to warm the truss. The truss lights are quite bright within the first six feet of truss. After that, it gets a bit dimmer, but still works well warming the inside of the truss. I also purchased eight of the 10x9 flat par stage lights to hang from the truss. The 10x9 lights are VERY bright and in smaller rooms, we angle them about 45 degrees towards the floor. Even at that angle, they put out quite a bit of light in front of the band.

    Both fixtures have some weak, typical fade auto-run shows. However, the 10x9 fixtures have a "follow" mode that can be used to simulate chase effects using two or more fixtures. Since we have eight of these fixtures, the follow mode is quite attractive. (Follow mode can be controlled with the back panel or with DMX.)

    Depending on my needs, I would definitely purchase either of these products.
    Stage Right by Monoprice 10-watt x 9 LED Flat PAR Stage Light (RGBW)
    Stage Right by Monoprice 10-watt x 9 LED Flat PAR Stage Light (RGBW)
    Can you power link these together similar to Chauvet or American DJ wash lights?
    Steven S on Jul 26, 2018
    BEST ANSWER: No :( that's one downside of this item. It comes with a four-foot power cord so you need to place lights that close to an outlet or run multiple extension cords.
    Is this unit rechargeable or do they have to be plugged in?
    A shopper on Sep 29, 2017
    BEST ANSWER: it does not have a internal battery. It needs to be plugged in.
    Is white light one of the choices? I don't need colors.
    A shopper on Dec 18, 2016
    BEST ANSWER: Yes. It is a cool white but you can warm it up by adding a little color to the mix
    Will this product work with a Leprecon LP 624 console and LD 360 DMX dimmer?
    A shopper on Mar 2, 2018
    BEST ANSWER: It doesn't need a dimmer as it is an LED fixture with onboard dimming but for the Lepracon it should work fine. You just have to select the simplest mode. I think its 4 channel but I don't have one on front of me right now. Then select the address, the first will be 1, the second will be 5, etc. unless you want them to all do the same thing then they can have the same address.
    then the first channel will operate red, the second will operate green , etc.
    I installed these one night, and after turning them off (removing the power) the next time I turned them on I had to climb a ladder and reset the DMX channels, as they all had set back to channel 1. Is this a common problem? Is there some way to save the settings once you change the channel?
    Adam S on Jan 30, 2017
    BEST ANSWER: Make sure to hit enter or they do
    Is there an existing personality in the ETC fixture library for this fixture? I'd like to buy about 12 of these but don't wan to bother if they won't work with my Ion board.
    Andrew V on Sep 23, 2017
    BEST ANSWER: If you have an Ion then just write the fixture to the library yourself, it is a very easy process, I have to do it all the time as people are constantly ordering lights from China.
    Does it come with hardware for mounting into a T-light stand?
    Jason D on Mar 12, 2018
    BEST ANSWER: No, you'll need a c-clamp. I purchased a bunch from guitar center for fairly cheap.
    How can I download the light profile for my console?
    A shopper on Aug 20, 2018
    BEST ANSWER: The new profile will need to be manually entered.
    Can you set these to a static color without DMX?
    A shopper on Mar 19, 2018
    BEST ANSWER: Yes, menu functions can be programmed and set for scenes, sound active and static colors. Once you have it the way you want it be sure to press the enter button to lock your selection. Light will return to your setting when power is turned back on.
    how many lumens does this produce?
    A shopper on Mar 2, 2018
    BEST ANSWER: There is noting in the instruction manual that says anything about lumens. However, it's fairly bright. I bought four and am happy with my purchase. One broke right away, but customer service was good and replaced it immediately.
    Can I daisy chain this with the 3-color LED light bar? For some reason I can't get it to mimic the coloring.
    Jeff Q on Jun 24, 2017
    BEST ANSWER: Thank you for your interest in this stage light. This unit can not run in master slave mode with the 612601 light bar. Since the light bar is 3-color (RGB) and the flat PAR is 4-color (RGBW) it will be difficult to get them to sync with the same color scheme. We are always looking to bring new products and improve existing units. I will keep this in mind for the future,

    I DMX Mode you can daisy-chain to allow DMX Signal to pass
    4.3 / 5.0
    41 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    Good… but less than I expected.
    Overall, for the money, you won't find a better RGBW fixture. It's bright, has a wide wash, the color mixing is smooth, and it's 100% camera friendly. No flickering or jitter effects when recorded on video. There are a couple of things about this fixture that disappointed me… even at this price point, which is why I gave it 3 stars.

    PROS: This fixture is very bright! Best output to dollar ratio I've seen. The RGBW color mixing is smooth and flicker free. At 2.5 lbs, the Monoprice Flat Par is perfect for small churches, schools, and other venues that can't hang heavy fixtures. The menu on the back is typical of other LED fixtures and is extremely easy to navigate (didn't even need the manual).

    CONS: While I understand that having an RGBW, 90w fixture for this price means some feature cuts, I was still disappointed in a couple of things. Even though Monoprice has low prices, we've all come to appreciate a certain level of quality that I feel is missing here. The tightening knobs for the yoke don't hold. No matter how hard you crank down, they eventually come loose. I'm going to buy some rubber washers and see if it helps (which is now adding to the cost per fixture). The knobs are cut from cheap plastic with VERY sharp edges and jagged plastic pieces sticking out, making tightening even more difficult. Power in AND out is pretty much standard on even the cheapest lighting fixtures. I would've liked to see it on this light.
    January 12, 2016
    Very bright light for the price
    I'm a Halloween hobbyist. I also loan my lighting to our local schools off season. so at this price its perfect for my year to year usage.

    PROS: Very Bright for the price. DMX features set is decent. while the W in the RGBW isn't very bright by itself, it is amazing what a difference it makes color mixing.
    Good for up close with wide disbursement (wide angle).

    CONS: ADD-ON OPTION BARN DOORS PLEASE!: I'm currently using this for a school play, and have come to realize there's too much light bleed at wider angles. I would recommend monoprice find a vendor to sell barn doors that can be added on to the front of this light so you can control or constrain the bleed better.
    KNOB LOOSENING HACK: I agree with another reviewer that the tightening knobs on the side come loose too easy when adjusting the light. This is because out of the box the RUBBER Washer, binds with the knob to the bracket too tight and will loosen when you adjust the light.. HACK: If you simply move the rubber washer between the bracket and the light housing instead, you'll see better results. I would also recommend if this is still a issue go to homedepot and get a hard plastic/metal washer add it between the knob and the bracket side do the bracket won't bind with the knob.
    April 30, 2016
    Flat PAR Stage Lights (RGBW) are great !
    First, I bought 2 to try. I liked them, bought two more, now I'm up to 5 total. I really like these par lights. I like that you can put the first par on "host", the remainder on "slave", use the menu mode Eo, E- , and EE to produce a nice slow (t 01) fade on the pars in sequence - without a controller. Now that I have DMX working from the laptop, that will make for better control.

    PROS: Bright
    Light Weight

    CONS: The fans make some noise. If used in any type of show setting with music, or 8 ft+ from the audience, this is not an issue
    I would have given a rating of 5, except the fan on one unit became unbalanced or something, and got very loud ( in the RMA process now for replacement )
    September 9, 2016
    Love these!
    I had 4 very old style led par64 cans, the ones with a bazillion little leds. The haloing on those were horrible. But it's what I had. I finally had the budget to replace them with these. They are used for lighting up a fabric backdrop in our sanctuary, and wow. No haloing, no ghosting, and smooth transitions. The only downside is that you can't really attach any kind of barn doors on them. But for a wash light, they are amazing.

    PROS: Good coloring, no halos. smooth color through out the spot

    CONS: No barn doors.
    August 11, 2016
    Stage lighting video...
    I just did a school play in a MPR with these. I have to admit after retro-fitting black construction paper around the light to handle the lack of barn doors they worked very well. totally killing my SlimPar64's. I was also the videographer and realized the blizard moving head we had was showing up flickering in the video where as these lights didn't. I was shotting at 24p and they looks great.

    PROS: Bright light for the price. worked well with my videography use.

    CONS: No barn door option, but that can be hacked with black construction paper and gaffer's tape.
    May 25, 2016
    Great Cheap LED
    By way of comparison, I own about 30 Monoprice 7x8 watt LEDs (Item 612740). Naturally, I'm going to compare this instrument with Monoprice's flagship LED.

    These LEDs are flatter and rounder than the other LEDs Monoprice sells. They are plastic, so how well they hold up remains to be seen (the 7x8s are all metal construction). As far as DMX goes, programming is exactly like the 7x8, so no need to create a new profile in your lighting software.

    Since this product has 9 10 watt LEDs, I expected it to be brighter than the 612740. I don't have a light meter, just going by my eye, but it doesn't seem to appear any brighter. It throws a tighter round pattern, with a harder circular edge to it than the other LEDs from Monoprice. Color seems to be pretty identical to the other Monoprice LEDs. This instrument may have richer blues could just be my imagination.

    This instrument is about $30 cheaper than the 612740s, so if you are buying a bunch of lights, it may be worth the savings. I would say the light output is pretty similar to the 7x8s, although again, the pattern is tighter. Overall, I'm quite impressed with this little fixture. 5 years ago, you'd be paying 10x the price for the same output!

    PROS: CHEAP. Good output. Fairly tight round pattern to the beam. Smooth dimming.

    CONS: Plastic case. ONLY operates in 8 channel mode, so if you're running out of DMX channels, you can't run it in 4 channel mode.
    January 11, 2016
    Nice Pucks, good price
    I bought these to use in a recruiting booth our school has and they are exactly what I need for that application. They come up a little hot at the low end, but their performance is great for their price point. Thee fade curve isn't that much worse than some of the much more expensive options out there. I haven't measured their beam angle, but it is just a hair wider than some 26 degree LED pars we have, so these are probably in the 30-32 degree range.
    November 30, 2016
    1 year ago
    Excellent buy for the price
    I previously purchased 10 of these for my venue about a year and a half ago, and while they worked great (and still are working well), they seemed to have updated the design a bit to make them even better!

    First, the mount pictured has been updated and that was one of my biggest gripes about the old units. The old mount never stayed tight or together but the redesign seems to have fixed that.

    The only other negative to the old ones is that the fans can get loud. Time will tell on these new ones. The fans have stopped working entirely on the old ones but they still operate 100% so I'm not worried.

    The nice thing about these lights is they don't flicker on our video setup, whereas our units that were 6x the price of these do!

    Bottom line, if you're looking for a cheap RGBW DMX light, this is an excellent value!
    December 14, 2017
    10 months ago
    Great for fixed installations!
    We have these stashed in some plastic columns at our church for a glowing effect. They are just small enough to fit, yet provide more than enough brightest. We've got 4 of them and 1 of the fans will buzz for about 2 minutes before silencing. Another fan has a slight buzz on spin up but goes away with a slight tap on the case. After that, they're good to go for hours. In our fixed installations, these work great, but I definitely wouldn't tour with them due to the cheaper construction.

    PROS: Bright! Low profile. Cheap. RGBW. No flicker. Solid menu buttons. Intuitive menu.

    CONS: Plastic construction. No barn doors. No power out for daisy-chaining fixtures. No low-profile AC plug.
    July 11, 2016
    Absolutely amazing light
    Perfect for what we need. Actually I am going to order 3 more of them soon
    August 26, 2018
    1 month ago