If you are visually impaired and are having difficulty navigating this site, please call our Customer Support line via our toll free number 1 (877) 271-2592.
    Triple Monitor Pyramid Free Standing Desk Mount for 15~30in Monitors
    Product # 15707
    In Stock This item should ship today (2/21/2018) if ordered within 4 hours 35 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $75.99
    Qty: 2-9 $75.23
    Qty: 10-19 $74.47
    Qty: 20-49 $73.71
    Qty: 50+ $72.19

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business


    Triple Monitor Pyramid Free Standing Desk Mount for 15~30in Monitors

    Triple Monitor Pyramid Free Standing Desk Mount

    This aluminum triple monitor pyramid free standing desk mount stands freely at the edge of a desk, table, or other horizontal surface with a wide V shaped base, which provides maximum stability. Three monitors can be attached to the mount while safely supporting up to 22 lbs per each mounting head. It supports VESA patterns of 75x75 mm – 100x100mm to fit most monitors from 15 – 30 inches. Each mounting head pivots 90 degrees, pans 360 degrees, and has a tilt range of ±12 degrees offering the most comfortable viewing angles. With this free standing mount it offers quick and effortless installation. You can avoid going to the local hardware store since this mount includes all necessary mounting hardware for installation.

    75 x75 & 100 x 100
    15 - 30 inch
    Aluminum & Steel Construction
    Up to 22lbs. per Display
    Height Adjustable

    75 x75 & 100 x 100
    15 → 30 inch
    Aluminum & Steel Construction
    Up to 22lbs. per Display
    Height Adjustable

    Tilt +12 ~ –12 degrees
    Rotate 360 degrees
    Swivel +60 ~ –60 degrees
    Cable Management
    Effortless Installation

    Tilt +12° ↔ –12°
    Rotate 360®
    Swivel +60° ↔ –60°
    Cable Management
    Effortless Installation


    • Compatible with displays with 75 x 75 and 100 x 100 VESA patterns
    • Recommended for 15" to 30" displays
    • Constructed of high-grade aluminum and steel
    • Supports three displays weighing up to 22 lbs. each
    • Displays can be individually swivelled ±60° and tilted ±12° to get the optimum viewing angle
    • Rotate displays 360° to easily switch between landscape and portrait display orientations
    • Cable management clips help keep your workstation neat and tidy
    • Effortless installation with no need to clamp it to your desk


    The Ideal Desk Mount for

    Financial Pros

    Financial Pros


    1 Year Warranty


    Monoprice not only stands behind every product we sell with a 1 year replacement warranty, we offer a 30-day money back guarantee as well! If the product you purchase does not satisfy your needs, send it back for a full refund.

    Quality at a Fair Price

    Quality at a Fair Price

    Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.

    Service & Support

    Service & Support

    You're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after the sale. Contact our technical support team for questions about our products, troubleshooting, or even suggestions for products to fit your particular needs. Not to be outdone, our friendly and helpful customer service team is here to make your ordering, delivery, and any possible returns a quick and painless operation, from start to finish!

    Model 15707
    Type Triple Monitor Free Standing Desk Mount
    Number of Supported Displays 3
    Minimum VESA 75 x 75
    Maximum VESA 100 x 100
    Weight Capacity (per Display) 22 lbs. (10kg)
    Min. Recommended Display Size 15 inches
    Max. Recommended Display Size 30 inches
    Tilt Range ±12 degrees
    Swivel Range ±60 degrees
    Rotation Range 360 degrees
    Construction High-Grade Aluminum and Steel

    Support Files:

    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 9 questions Browse 9 questions and 15 answers
    Can this be assembled inverted, such that the centered mount is below and the swingarm mounts are on top?
    Jerry S on Dec 22, 2016
    BEST ANSWER: I haven't tried it, but I believe it can. There are plastic stoppers that can be adjusted up and down so both the bottom and top monitor attachments could technically go anywhere. I personally wouldn't recommend it, as placing the significant amount of wait at the top would allow the stand to be knocked over much easier.
    Is there a manual for this thing? I tried to put it together the best I can, but I've got a bag full of bolts and standoffs, and a bunch of little black plastic pieces left over, and the stand is in perpetual threat of tipping over. That can't be right.
    Jason F on Dec 6, 2016
    BEST ANSWER: Mine works great and had no extra parts, it had instructions but didn't need them. The plastic bushings need to be installed sounds like. Also if it's tipping it means you are angling the bottom monitors in at the elbows instead of the wrists of the two swing arms. Run the swing arm in a straight line and just use the pivot points at the ends of the swing arms to angle in the bottom monitors. Using the elbow pivots causes too much front weighting.
    Could I mount a 32 inch monitor on the top and two 24 or 27 inch monitors on the two base level mounts?
    John S on Nov 24, 2017
    BEST ANSWER: Hi, it should be doable since you'll be using smaller ones for the bottom screens. To be sure, you can measure how high the center of the top vesa mount will be in such a configuration, this mount allows that to be around 28" high measuring from the base. You can get the vertical height of your bottom screen, then add the height until the center of your top screen's vesa mount. If that's less than 28" then it should work. Thanks for checking.
    Can i flip the mounts around for example can i put the top mount on the bottom and the 2 bottom mounts on the top i'm trying to go for a reverse pyramid setup?
    A shopper on Jun 27, 2017
    BEST ANSWER: I think you can.. I can check when later when I am at home.. however.. even tough I think it is possible you will run into a center of gravity problem since this configuration will restrict how far you can move the two monitors from the round supporting vertical pole.. See the base is not big enough to shift the center of gravity forward when you need to use them closer to the user. I have run into this problem with the standard configuration.
    Can the upper mount be place 180 degrees from the lower arms? We would like the operator to have 2 monitors - side by side - and the 3rd monitor turned away from operator?
    New User U on Oct 8, 2017
    BEST ANSWER: Yes! The brcket is attached to the round central pole of the display and either the lower or upper can be rotated to any direction.
    What is the maximum distance between centers of the mounts on the dual monitor level?
    A shopper on Nov 27, 2017
    BEST ANSWER: Hi, the maximum distance would be approximately 31". Hope this helps.
    How high can you make the top mount? How many inches from the base to the center of the top mount at it's highest position?
    A shopper on Aug 19, 2017
    BEST ANSWER: 28 inches ...
    Does every monitor work in the specifications given?
    A shopper on Mar 9, 2017
    BEST ANSWER: I don't understand the question, if you are asking if every monitor is on and working at the same time, then yes. I have a TV on the top section and 2 computer monitors on the lower level and they are all on and working.
    Can I mount two 27'' curved monitors to the bottom brackets and a 32'' curved monitor to the top mount? Each monitor has a 75 x 75 vesa mounting system.
    A shopper on Dec 20, 2017
    4.2 / 5.0
    6 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Stars
    Excellent quality, just what I was looking for. Highly recommend.
    January 6, 2017
    1 year ago
    Nice stand for a nice price.
    Doesnt mount to the desk if you are worried about ruining it and it is very stable.
    December 7, 2016
    1 year ago
    Bracket snapped and Monoprice has been a hassle
    When assembling this stand, the upper mounting bracket snapped where the bolt is tightened. The bracket is still functional, but it is mobile on the mount, so you can pull the upper monitor off at any time. The lower collar keeps it from sliding down.

    I emailed Monoprice to get an RMA, and it took them 16 business days to inform me that they couldn't replace the bracket by itself and would only replace the entire mount, which would mean disassembling my home office setup--not worth it.

    This will be the last time I buy something like this from Monoprice.
    August 4, 2017
    7 months ago
    Works fine. Lots of flexibility.
    I upgraded to this rack from a vertical 2-monitor stand. Assembly was quick and easy. This stand is nice and sturdy and provides a lot of flexibility for size of monitor you use and positioning of each monitor. I'm currently using it with a 23" monitor above 2 19" monitors..
    June 18, 2017
    9 months ago
    Would like to see a little more weigh behind the post.
    January 14, 2018
    4 months ago
    Very nice & measure before you mount
    I mounted 2 - 27" monitors side by side and a 19' above and found I no longer had room under the monitors for my computer on top of my keyboard tray.
    Measure overall high before you start.
    I am glad I go this unit - it is very stable.
    February 6, 2018
    1 month ago


    In Stock This item should ship today (2/21/2018) if ordered within 4 hours 35 minutes