I assume your amp will support a 4Ω load. The Aria sub has 2 inputs, left & right. Both are 8Ω. The 4104 are also 8Ω. You can run 1x 4104 and one side of the sub in parallel, run the other 4104 to the other side of the Aria sub. Your amp will see a 4Ω load on each channel. Wiring speaker in series is generally a bad idea. The wiring is messy and lose a lot of power, this config will show as a 16Ω load to the amp cutting the power at least in half and then splitting that in half to the 2 speakers.
The satellite output from the sub will support up to an 8Ω load, the 3" satellites are 16Ω. The satellite load will not effect your amp so you get full power to the sub.
If you run the 4104 first they will see full range signal. If you run them from the satellite our of the sub they will only see 250Hz and above.

• Reply
• Dave L Staff on Jul 9, 2018