Volume Pricing (Log In to see Member Pricing)
Universal Screen Cleaner (Large Bottle, Blister Pack) for LCD & Plasmas TV, all iPad, iPhone, Galaxy Tab, and Smartphon...
1-port 2-piece Inset Wall Plate with 4 in Built-in Flexible High Speed HDMI Cable With Ethernet, White
Tilt Wall Mount Bracket for 37~63 in TVs up to 200 lbs
Don't leave your flat panel TV on a table or stand where it can be knocked over and damaged, or even worse injure a child or pet. Instead, mount it securely and safely to the wall using this Adjustable Tilting Wall Mount Bracket from Monoprice!
This mount bracket has the ability to tilt up to 5 degrees upward and 15 degrees downward, making it ideal for overhead displays in a commercial setting or for keeping the TV out of reach of little hands at home. The mount includes two security brackets, which prevent removal of the display from the mount (padlocks not included).
This bracket is designed to mount an LCD, LED, or Plasma display with a VESA mounting pattern between 400x400 and 800x500, which includes most 37" to 63" TVs*. It can be mounted to any type wall (brick, concrete, wood stud, etc.) and can safely hold up to 200 lbs (including the weight of the mount itself). Mounting hardware is included.
* Note that the display screen size is only an approximation. Your TV is compatible with this mount as long as your display has a VESA mounting pattern and weight that fit within the size and weight limits listed above.
|Minimum VESA||400 x 400|
|Maximum VESA||800 x 500|
|Maximum Weight||200 lbs|
|Minimum Display Size||37"|
|Maximum Display Size||63"|
|Tilt Range||+5/-15 degrees|
|Wall Plate Dimensions||33.6" x 8.5"|
|Front Plate Dimensions||N/A|
|Built In Level||No|
Includes security brackets
(padlocks not included),
No logo on mount
The other complaints about the TV tilting after tightening the tension arms are because there is are Allen-headed screws on the opposite side of the mounting bracket. Once you hang the tv and get the angle desired, take it down and tighten these Allen screws down. The makes the angle stay when you go to mount it permanently.
Thank You MonoPrice for another great product!!!!
PROS: This was far easier to setup than I thought it would be. I have a Sony 55nx720 and it works perfectly. The security bars also fit without any issues. The wide variety of TV mounting bolts is a plus, also if your TV has recessed bolts in the VESA pattern there are spacers in the kit.
Does what it is supposed to:) Keep the TV on the wall.
Spend your SAVED $ on DVDs
PROS: Solid Bracket! *PRICE, Easy to Install, *PRICE!! Fast shipping, *PRICE!! Looks Great, *Price!! Great design.
Oh did I forget to mention the Price? Saved so much money $ with MONOPRICE.
Similar bracket was $300 at BB and other stores. Took that one back right away.
CONS: The tilt lock on the unit is not locking TV at Angle, maybe too much weight at how I mounted it, but it works fine any way. Dads TV is on a big wall in a big room, So it works leaning on the wall as it is.
MONOprice has always been fast and friendly if I needed to return things. So not an issue for me.
PROS: Excellent quality and very easy to install with all necessary screws, etc to attach to the wall. The opening is an exact fit around a standard outlet plate making it easy to install an electrical outlet right in the middle of the mount. Tilt works very well and is easy to adjust.
PROS: Solid Frame
Easy to install
Great price compared to other stores and sites
Has the anti thieft feature to protect your investment
CONS: Tilt feature needs alot of work. Did not hold my 60" to the angle that I wanted. As soon as I had the angle that I wanted, TV would tilt all the way down. Had to put some blocks beneth the brackets.
Comes with 6 BIG screws and 6 washers to attach it the the wall. After screwing the bracket into the wall and hanging the TV, there's a bar that you're supposed to slide into the bracket to prevent the TV from lifting up and falling off. BUT the bar can't fit over the washers. You need to skip the washers on the top row of screws. So, I had to unscrew the top row of screws, remove the washer, and rescrew them. Oncce the washers were gone, the bar slid in easily. The instructions clearly say to use the washers. I think it's still plenty strong without the washers, but it shows that this product wasn't really tested.
PROS: inexpensive, very secure, wide bracket made it easy to install over wall studs, includes wide variety of screws for attaching to TV.
CONS: Tilt angle is imprecise and almost impossible to adjust. Security bar doesn't fit over supplied washers. Need to install without washers on top row.
However, I had two problems regarding the instructions. One MAJOR, the other more of a quibble.
I was bolting to wooden studs. The instructions say to drill 10mm (3/8") pilot holes. I did all my measurements then drilled the 4 holes. Thought I'd test one bolt before heaving the mount. And the hole is WAY bigger than the bolt. The instructions are completely wrong. I read another review complaining of this who suggested using 15/64" pilot holes. I did this and it worked fine. But I had to move the position about 1.5" lower than I had originally planned since I had these giant useless holes.
My other complaint, also mentioned by another reviewer, is that the instructions show a diagram where you bolt it into 3 studs. Great if you're able to center your TV on a stud. Not so in my case, so I was trying to decide whether it was better to bolt the mount onto 3 studs as per the diagram and have the TV be offset from the mount's center vs. center the mount and bolt to two studs only. Absolutely no mention in the instructions about this. I went with centering and bolting to 2 studs, but i'm still not sure if that was the best choice.
So install with care. Maybe Monoprice changed the bolt sizes for this mount, but didn't update the instructions? Monoprice folks if you read this - please spend some time on better instructions and fixing major errors like this!
PROS: Great price, very good quality.
Fairly easy to install (see caveats below).
CONS: Very poor instructions.
I had to find long screws to go into the bottom holes, where thumbscrews would normally be found.
PROS: Sturdy bracket, reasonable amount of mounting holes for a variety of the LCD sizes.
CONS: The tensioners do not seem to apply adequate friction to keep TV from tilting down with the slightest touch.
Security-oriented locks are useless on a standard 200mmx200mm TV's, making them a fall hazard.
Monoprice support was no help. They could not understand the problem or offer any solutions. As of now, the tv is on the wall but not really secured in any way. I will probably have to go a big box store and buy some supplies to jury-rig my own way to make the tv safe.
PROS: Great materials, easy instructions
CONS: The security bar didn't fit!
PROS: Strong, sturdy mount with openings
CONS: Tilt function does not work