Volume Pricing (Log In to see Member Pricing)
Universal Screen Cleaner (Large bottle, blister pack) for LCD & Plasmas TV, all iPad®, iPhone®, Galaxy Tab®, and smartp...
Two-Piece Inset Wall Plate with 4 Inch Built-in Flexible High Speed HDMI® Cable With Ethernet - Single Port (1P) - White
Tilt Wall Mount Bracket for LCD LED Plasma (Max 125 lbs, 32~52 inch)
Don't leave your flat panel TV on a table or stand where it can be knocked over and damaged, or even worse injure a child or pet. Instead, mount it securely and safely to the wall using this Adjustable Tilting Wall Mount Bracket from Monoprice!
This mount bracket has the ability to tilt up to 5 degrees upward and 15 degrees downward, making it ideal for overhead displays in a commercial setting or for keeping the TV out of reach of little hands at home. The mount includes two security brackets, which prevent removal of the display from the mount (padlocks not included).
This bracket is designed to mount an LCD, LED, or Plasma display with a VESA mounting pattern between 100x100 and 500x400, which includes most 32" to 52" TVs*. It can be mounted to any type wall (brick, concrete, wood stud, etc.) and can safely hold up to 125 lbs (including the weight of the mount itself). Mounting hardware is included.
* Note that the display screen size is only an approximation. Your TV is compatible with this mount as long as your display has a VESA mounting pattern and weight that fit within the size and weight limits listed above.
|Minimum VESA||100 x 100|
|Maximum VESA||500 x 400|
|Maximum Weight||125 lbs|
|Minimum Display Size||32"|
|Maximum Display Size||52"|
|Tilt Range||+5/-15 degrees|
|Wall Plate Dimensions||21.9" x 8.6"|
|Front Plate Dimensions||N/A|
|Built In Level||No|
Includes security brackets
(padlocks not included),
No logo on mount
I mounted an older Olevia TV, the bolts to attach the tv to the bracket were not needed. The smallest in the package were 5mm. My TV needed 4mm. But whatever, it was only 80 cents more.
PROS: The power outlet 4006 fits just fine between the two horizontal supports. http://www.monoprice.com/products/product.asp?c_id=105&cp_id=10425&cs_id=1042513&p_id=4006&seq=1&format=2
CONS: I needed to buy some 4mm screws to mount TV on the bracket as the smallest provided was 5m. But no big deal
PROS: The price, the price, and the price.
PROS: Went up easy and no issues after 2 years. Purchased another for a friend
CONS: No level included. Need a level to install
Very low profile, which I wanted. This makes use with thick cables a little more challenging, but that can be avoided using port savers. I ended up not needing them, though with a 22AWG HDMI cable.
PROS: Price, quality, ease of installation.
-fairly low profile
CONS: -The instructions show a picture of the cement anchors even in the picture where you are not installing in cement. So it's kind of confusing. The instructions overall are not great but are enough to get the job done.
-You probably won't adjust your TV too often once it's on the mount. However, it is only 2.95 inches from the wall. So if you need to reach behind the TV for anything... good luck with that. This is a Pro and Con I guess.
This mount is just as good (if not better) than the junk they sell for over $100 in most stores. I made sure to level the mount before I drilled my 2nd lag bolt, and made sure the brackets were aligned on the tv. After everything was done and the tv (46" Sony LCD) hung, it was perfectly level at all degrees of tilt.
I would really suggest plugging in your cables before actually hanging on the mount, as there is very little room once hung to reach back in there. I have not noticed any looseness in the tilt mechanism, and the TV feels solid once the set screws are tightened. I put in all 4 lag screws, but it felt sturdy even with just the top 2 in studs. Just make sure to use a drill bit slightly smaller in diameter than the threads on the screws. Do NOT drill out studs to use the anchors (ignore the instructions), they are for brick/mortar only.
Thank you Monoprice for saving me money yet again!
PROS: Cheap. Sturdy. Cheap. Plenty of screws for all types of TVs/Panels. Did I mention cheap?
CONS: Instructions are sparse? TV sits tight to wall, so a bit hard to make connections after TV is hung.
PROS: Easy to install. Sturdy.
CONS: Directions a little ambiguous.