Volume Pricing (Log In to see Member Pricing)
Universal Screen Cleaner (Large bottle, blister pack) for LCD & Plasmas TV, all iPad®, iPhone®, Galaxy Tab®, and smartp...
Two-Piece Inset Wall Plate with 4 Inch Built-in Flexible High Speed HDMI® Cable With Ethernet - Single Port (1P) - White
Full-Motion TV Wall Mount (Max 66 lbs, 23 - 42 inch)
Don't leave your flat panel TV on a table or stand where it can be knocked over and damaged, or even worse injure a child or pet. Instead, mount it securely and safely to the wall using this Adjustable Tilting/Swiveling Wall Mount Bracket from Monoprice!
This mount bracket supports adjustments in three dimensions; it can be swiveled ±180°, can be tilted ±15°, and can be rotated ±3°, for final leveling adjustments. It has undergone extensive safety testing and has been certified by Underwriters Laboratories (UL), which ensures that it will perform safely and reliably.
This bracket is designed to mount an LCD, LED, or Plasma display with a VESA mounting pattern of 75x75, 100x100, 200x100, or 200x200, which includes most 23" to 42" TVs*. It can be mounted to any type wall (brick, concrete, wood stud, etc.) and can safely hold up to 66 lbs (including the weight of the mount itself). Mounting hardware and cable management clips are included.
* Note that the display screen size is only an approximation. Your TV is compatible with this mount as long as your display has a VESA mounting pattern and weight that fit within the size and weight limits listed above.
- User's Manual (May 20, 2013)
|Minimum VESA||75 x 75|
|Maximum VESA||200 x 200|
|Maximum Weight||66 lbs|
|Minimum Display Size||23"|
|Maximum Display Size||42"|
|Tilt Range||±15 degrees|
|Swivel Range||±180 degrees|
|Rotation Range||±3 degrees|
|Construction||Steel, Aluminum, & Plastic|
|Color||Black & Silver|
|Wall Plate Dimensions||4.3" x 12.9"|
|Front Plate Dimensions||9.1" x 9.1"|
|Built In Level||No|
|Notes:||No logo on mount|
Overall very pleased, if you get one you might get a feel for how 'tight' the 2 VESA plate posts feel in the arm head and perhaps do a little file work to open the bottom slot just a tad for initial placement...don't overdo it of course because you don't want your 'rotate' adjustment to become sloppy.
Note also that this is a full articulation arm for distance from wall and right-left swivelling,but the screen 'rotate' and 'tilt' positions are fixed (tilt with a hex-head that you tighten down in the desired angle). This does not dynamically alter tilt during use. One final comment when mounting - be sure to measure the distance from the top of the wall mount to the top of the VESA pattern on the plate, then from the VESA pattern on your TV back to the top of your TV, to decide wall height placement. The mount does show slightly below the TV when the arm is in the fully folded, closest to the wall position, and VESA patterns are typically below centerline on the TVs. Just so you don't get the mount on your wall then have an "oh crud" moment that the TV won't fit unless tilted way down, if you wanted it near you ceiling/wall boundary.
PROS: Very heavyweight (in a good way - confident it can support the TV)
Good positive adjustments
Effective cord routing
VESA plate does not extend beyond 200x200 pattern (i.e. won't block ports)
Nice hangar mechanism w/ 2 large thumbscrews - but see 'cons' below
Good look w/ black and stainless finish
Good instructions with included drill/marking template
CONS: On mine the bottom screw post for the hangar was really tight to get into the bottom slot...suspect very slightly off-tolerance slot drill. Manageable, but shouldn't have to fight that hard.
"Rotate" adjustment (3deg rotation about screen axis) is really just bottom thumbscrew position
CONS: Would not fit tv purchased for
PROS: Looks good, well built, does the job I wanted it do... I'd buy another if needed.
CONS: One of the two wire fairleads has insufficient space for the TV power cord and two HDMI cables, it needed to be strapped on, I used a hook and loop strap otherwise an attractive, cleaver design.
PROS: Easy to install and operate.
CONS: None, to this point.
PROS: Robust and good looking. Easy to install
CONS: Cord routing device is cheap and flimsy. Plan on using zip ties