Volume Pricing (Log In to see Member Pricing)
Tilt/Swivel DUAL Monitor Desk Mount Bracket (max 18 lbs per arm, 15~22inch) - Black
Free space on your desk and gain improved ergonomics by using this Adjustable Tilting Monitor Desk Mount Bracket from Monoprice!
Using a desk mount bracket provides additional desk space by moving the monitor above the desk. The bracket allows you to position your monitor at eye level, which reduces neck and back strain and aches from length sessions in front of the computer.
The mount attaches to the edge of a desk, table, or other horizontal surface with a maximum thickness of about 4.5". It includes a soft rubber pad to protect the finish of your mounting surface. Alternatively, it can be fixed to a grommet screwed into the top of the mounting surface.
The mount features two jointed 22.8" extension arms, which allows you to position your monitors at exactly the right height, angle, and distance. The monitors can be tilted and rotated, allowing for easy conversion between landscape and portrait mode. It fits two monitors up to 17.6 lbs weight each with either a 75x75 or 100x100 VESA mounting pattern.
- Fits two monitors with VESA 75x75 and 100x100 mounting patterns
- Tilts ± 15 degrees
- Rotates 360 degrees allowing for easy portrait or landscape orientation
- Two jointed 22.8" extension arm
- Height adjustable to about 11.8"
- Clamps to surfaces up to 4.5" thick
- Alternate grommet mounting option
- Includes cable management clips
- User's Manual (Feb 23, 2013)
|Minimum VESA||75 x 75|
|Maximum VESA||100 x 100|
|Maximum Weight||17.5 lbs/display|
|Minimum Display Size||15"|
|Maximum Display Size||22"|
|Tilt Range||±15 degrees|
|Swivel Range||±90 degrees|
|Rotation Range||360 degrees|
|Construction||Steel and Aluminum|
|Wall Plate Dimensions||N/A|
|Front Plate Dimensions||4.7" x 4.7"|
|Built In Level||No|
Be patient mounting them, as it will take some time and patience to get everything setup without scratching/dropping your monitors. Overall the arms can feel a little flimsy, but I'm mounting monitors that are right at the maximum specified weight for these arms and well beyond the recommended size, and I'm definitely not complaining! Overall this kit is a great solution and a great value at three times the price.
PROS: NO PROBLEMS with (2) 28" LCD, provides height adjust-ability for non-height-adjustable monitors, frees up lots of desk space, great positioning flexibility, amazing value. Far exceeded my expectations - what a nice surprise.
CONS: Takes some time and patience to setup, and I would definitely recommend mounting this on a sturdy (not glass) desktop. Still a great deal!
PROS: Very sturdy metal arms.
CONS: Weight capacity.
PROS: Low cost, easy no-drill installation, tech support
PROS: really easy setup
CONS: cheap plastic cable clips but I am nitpicking
PROS: Exactly what I asked for. Came quickly and everything was included that was supposed to be. Very pleased.
PROS: Moves lots of different directions
Attaches to the desk different ways
Extends pretty far
CONS: Weight of 22" LED monitors makes the arms sag
Difficult to get the 2 monitors balanced to where they're the exact same height/angle
PROS: * Easy assembly
* Can support 2x 24" monitors
* Good mounting
* Tilt and freedom of movement is great
CONS: * Cable management is not great
The mount is basically 5 pieces:
- the base that clamps or screws to your furniture
- a stalk/pole that mounts to the base
- a set of two pivoting arms that ride on the stalk
- 2 monitor mounts that screw to the back of the monitor and then slip into holders on the arms (and are pinned in place with a cap screw)
The stand itself has two arms which can move in the horizontal plane, the arms connect to each other at a ring that goes around the support stalk - the ring has its own lever actuated clamp to keep the ring at a given height. Height changes are made by releasing the ring clamp, moving the arm unit up or down on the stalk and retightening which can be a little tricky with the monitors mounted. My monitors are off horizontally by about 1/4" to 1/2" and there is no way to fix this - its not really a problem, but it catches my eye every now and again. Also, the centerlines of both monitors are always at the same height which might limit some configurations.
Overall the arms allow my two 22" monitors good movement and I can swivel them at will (there are no denents or stops in the swivel so the cables are the only things stopping the amount you can swivel - both a plus and a minus I suppose). To get the monitors centered, I do need a few inches behind the base which means my desk had to come away from the wall and there is some lost room back there.
Overall the mount is sturdy and easy to setup.
PROS: The product was better than expected (quality), Shipped on time, No hassles ordering.
PROS: Strong construction, easy assembly. Good quality hardware and well thought out design. Can be mounted directly to a table via screws and the included base as well.
CONS: Cannot move vertically very efficiently.