Volume Pricing (Log In to see Member Pricing)
Workstream by Monoprice Sit-Stand Single Motor Height Adjustable Table Desk Frame, Electric, Black
Workstream by Monoprice Full-Size Sit-Stand Workstation Converter, Height Adjustable Desk 30in
Workstream by Monoprice Full-Size Sit-Stand Workstation Converter, Height Adjustable Desk 36in
Workstream by Monoprice Full-Size Sit-Stand Workstation Converter, Height Adjustable Desk 48in
|Type||Triple Monitor Free Standing Desk Mount|
|Number of Supported Displays||Two (2) or Three (3)|
|Minimum VESA||75 x 75|
|Maximum VESA||100 x 100|
|Weight Capacity (per Display)||22 lbs. (10kg)|
|Min. Recommended Display Size||15 inches|
|Max. Recommended Display Size||30 inches|
|Tilt Range||±12 degrees|
|Swivel Range||±60 degrees|
|Rotation Range||360 degrees|
|Construction||High-Grade Aluminum and Steel|
- User's Manual (Aug 12, 2015)
Questions and Answers
The tilt mechanisms each have 4 bolts that need to be very tight, or else the weight of the monitor alone will cause it to tilt down. This should be done BEFORE you screw the monitor to the arm or else it is annoying to get the allen wrench into the correct screws.
There should be a simple 1 wingnut height adjustment on the bracket. Instead, you need to hold the weight of the monitors up with one hand, and use the allen wrench to loosen the bolts. Eventually, you will be able to lift the arms up, and hold them in the desired position until you can crank the bolts down again.
PROS: The stand is a good value for what it does. It does support 2 monitors (in my case 24" monitors) at a descent price.
CONS: The stand is difficult to adjust since you need the allen wrench that was included to do most of the adjustments. Or the adjustments that are done by hand are either too loose that the monitor sags, or too tight that it is difficult for the adjustment to be made.
PROS: easy to assemble works as advertised good flexibility in positioning your screens
PROS: - Heavy (offset monitor weight)
- Sturdy construction (I doubt this thing will break or bend)
- Comes with monitor screws for two different depths, plus spacers.
- Price is incredible! ...as always.
CONS: - Barely a one person job mounting both monitors
- The cable management is a joke (heavy duty cables will not work well)
- Included Allen wrench was not correct size (almost stripped the hex bolts)
PROS: Sturdy, quality construction. Fully adjustable: pan, tilt, zoom. Weight easily supports standard monitors. Frees up almost all the space beneath the monitors.
CONS: a little too flexible. Takes a bit to adjust to your liking
PROS: Good Price point, nice quality
Pros: Steel and heavy duty. Doesn't tip and is just light enough to move around. Seems to hold nearly any monitor.
Cons: a bit tricky to adjust, I wish the bottom had large foam protection similar to the Monoprice LED Lamp, so as to not to scratch nice desks.
1 year ago
Will be ordering more.
PROS: Heavy enough to hold 27", Cable management is Standard, might need a zip tie in a few spots.
CONS: I need a stand to hold two monitors and that what I got. So I could find anything wrong with it. The tool that came with it I didn't use as I have my own tools. Cable management that some one else said was bad, I guess he/she never used a zip tie. Overall for the price its perfect.
PROS: Versatile and still sturdy.
CONS: Heavy when loaded with two monitors best if you can approach the far side of the desk when positioning it with monitors installed.
PROS: Perfect for holding my two, 24" monitors. Very sturdy and well-built. Easy to setup.