Volume Pricing (Log In to see Member Pricing)
Blackbird HDMI Extender over Single 100m Coaxial with Bi-Directional IR Support
The Monoprice Blackbird™ HDMI® Extender can transmit HDMI video to distances up to 328 feet (100 meters) over standard RG-6 coaxial cable. It provides a bandwidth of 6.75Gbps and supports 1080p video resolutions, 12-bits per channel Deep Color, and 48kHz LPCM digital audio. It features an IR blaster, which gives you the ability to transmit infrared remote control signals, allowing for truly remote control of your equipment.
Extend up to 328ft: This extender can transmit HDMI® video to distances up to 328 feet (100 meters) over a single standard RG-6 coaxial cable.
IR Control: The bi-directional IR blaster allows you to control your video source device using its IR remote control from the remote location or to control the display from the source location.
Compatibility: This extender carries High Speed HDMI signals at resolutions up to 1080p, making it compatible with DVD players, Blu-ray Disc™ players, gaming consoles, and more.
- Supports the HDCP 1.1 standard
- Supports video resolutions up to 1920x1080p
- Supports 12-bits/channel (36-bits total) Deep Color
- Supports high-definition audio, including 48kHz LPCM digital audio
- Provides 6.75Gbps bandwidth
- Equalizes and recovers incoming TMDS data
- Bi-directional IR blaster transmits IR signals in either direction
Monoprice not only stands behind every product we sell with a 1 year replacement warranty, we offer a 30-day money back guarantee as well! If the product you purchase does not satisfy your needs, send it back for a full refund.
Quality at a Fair Price
Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
Hassle Free Packaging
Monoprice exists to bring simplicity, fairness, and confidence to technology choices. This product features recyclable packaging that is simple to open, cost effective, with minimal waste, and fully protective as it travels to you.
Service & Support
You're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after the sale. Contact our technical support team for questions about our products, troubleshooting, or even suggestions for products to fit your particular needs. Not to be outdone, our friendly and helpful customer service team is here to make your ordering, delivery, and any possible returns a quick and painless operation, from start to finish!
|Maximum HDMI® Resolution||1920 x 1080p @ 60Hz|
|Bandwidth||2.25Gbps (6.75Gbps total)|
|Deep Color Support||Up to 12-bits/channel (36 bits total)|
|Maximum Transmission Distance||328 feet (100 meters)|
|Operating Temperature||+32 ~ +104°F (0 ~ +40°F)|
|Storage Temperature||-4 ~ +140°F (-20 ~ +60°C)|
|Operating Humidity||20 ~ 90% RH, non-condensing|
|Dimensions (each)||3.1" x 1.6" x 1.0" (80 x 41 x 25 mm)|
|Weight (each)||5.3 oz. (150g)|
- User's Manual (Jul 20, 2016)
Blackbird™ is a trademark of Monoprice Inc.
HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Blu-ray Disc™, Blu-ray™, and the logos are trademarks of the Blu-ray Disc Association.
Questions and Answers
My house was built in 1989. It was pre-wired for cable with two outlets in most rooms and a distributed center at the cable service entrance, which I do not use. (We have dish.) I'm pretty sure the existing wiring is RG59 and NOT RG6.
Pre-terminated BNC cables (like the Monoprice Viper Series) are highly recommend for the best performance.
I hope this information is useful. Thanks!
I have used it in the past and it works great.
you will have to place both emitters on DTV receiver. You can use a dual output emitter, 1x emitter on DTV receiver and 1x on BD player
Everything else still works fine. Any suggestions?
2 months ago