Volume Pricing (Log In to see Member Pricing)
Screen Protector (3-Pack) w/ Cleaning Cloth for 4.7-inch iPhone® 6 and 6s - Transparent Finish
Protect your 4.7-inch iPhone® 6's and 6s screen from scratches and fingermarks with a Monoprice protective screen film. This screen protector is sized to perfectly fit your iPhone 6 and 6s and comes with a High Transparency finish, which allows the full spectrum of colors to shine through in all their original glory.
While the film will adhere to your iPhone's screen, it will not leave any resins or residue when removed. The packaging includes a lint-free cleaning cloth, to ensure that the screen is clean before applying the film. Each pack comes with three screen films, so you can replace screen films as they become scratched and worn out from daily use.
iPhone 6 and 6s not included!
Apple and iPhone are registered trademarks of Apple Inc.
- 3x Protective screen film
- Lint-free cleaning cloth
How to apply the Screen Protective Film to your phone:
- Please turn the device off. Clean the surface of the touch screen with the cloth provided in a dust-free environment. Please do not use cleaning agents.
Start by folding down the backing layer. Avoid touching the back of the film, which may leave your fingerprints on it, peel off about an inch. Make sure the adhesive side is facing down.
Note: Removing the backing all at once may cause static that could attract unwanted dust.
Apply the film with adhesive side toward the screen. Align the screen protector with the screen edge and place it in position by applying light pressure to the film at the point of contact (front side).
Work your way across the screen, slowly pulling the backing layer off.
Be sure not to leave any bubbles on the screen surface as you go. If you have any air bubbles when finished, see below.
If you notice bubbles as you go, pull back and retry. If it's caused by dirt, attempt to lightly flick it off or use the sticky side of a piece of tape, (clothes lint roller tape is best).
Use the installation card provided to smooth out any bubbles not caused by dirt. Apply light pressure evenly across the surface until the film is completely adhered. If no dirt is present, very small air bubbles may dissipate in a few days.
This product works great.
PROS: These screen protectors work great, and fit great.
Before I removing the backing, I lined up the screen protector over the screen to see how much leeway I would have on applying it. Turns out it, very little. In fact, it didn't quite cover the lit area of the screen (left and right sides) but it is probably only a half a millimeter off on each side. The gap is about 2mm at the top and bottom between the edge of the protector and case. If this would bother you, don't get this screen protector.
Because of the overall size, it is a bit harder to line up and apply perfectly straight.
Overall I am satisfied with it.
PROS: - good quality
- reasonably priced
CONS: - fingerprint magnet
- odd cutout at top around light sensor (not a small U as pictured) instead is is about half the width of the receiver cut out located just below and off center
PROS: Easy to apply
Good value (3 in a package)
PROS: Fits great, easy to install
PROS: Good product.
CONS: Slightly over-priced.
PROS: Works like a champ!
Easy to apply
CONS: Curved edges of phone screen makes protector look too small
PROS: Fits the screen perfect, 3 pack is nice in case you make a mistake installing the first one (like I did)
PROS: Easy to apply and fix application if you messed up the first time.
Edges won't bend up because they're not curved to the glass at the very outside.
All holes aligned perfectly.