Volume Pricing (Log In to see Member Pricing)
6 Outlet Desk Mountable Power Surge Protector w/ 2 Built-In USB Charger - 2100 Joules - Plastic w/ 6ft Cord
133-inch, 16:9 HD Gray Fabric Fixed Frame Projection Screen
Give yourself the gift of a true Home Theater system with this Projection Screen from Monoprice!
This screen is made from a high-quality four-layer fabric. The surface layer is embossed with PVC microdots, which produces a 0.8 gain across an extra wide 160 degree viewing angle. The second layer is made of PVC, followed by a fiberglass layer, and another PVC layer to complete the screen. The result is a smooth screen surface with a stretch rate of less than 1%. By comparison, traditional chemical treated fabric screens have stretch rates as high as 33%!
This is a non-retractable, fixed frame screen. It features a black aluminum frame, which keeps the screen taut in both dimensions. The frame is covered in black velvet. The screen measures 133 diagonal inches and is sized for a 16:9 aspect ratio. The package includes hardware to mount the screen to a wall.
- 8cm black aluminum frame covered in black velvet
- 133" diagonal screen size
- 16:9 aspect ratio
- 160° viewing angle
- 0.8 screen gain
- Wall mounting hardware included
- User's Manual (Nov 26, 2011)
Shipping Note: This is an oversized item, which requires special handling. We are able to ship it to addresses within the 48 contiguous United States. We are unable to ship it to AK, HI, PR, US Territories, and international countries due to the product size. Expedited shipping methods are not available.
|Screen Color||HD gray|
|Viewing Area||115.9" x 65.2" (2945 x 1656 mm)|
|Total Screen Height||71.5" (1816mm)|
|Left/Right Borders||3.1" (80mm)|
|Top Border||3.1" (80mm)|
|Bottom Border||3.1" (80mm)|
|Case Material||Black aluminum|
|Frame Dimensions||122.2" x 71.5" x 1.4" (3105 x 1816 x 35 mm)|
|Package Dimensions||129.4" x 10.1" x 7.5" (3286 x 257 x 190 mm)|
|Net Weight||33.1 lbs (15.0 Kg)|
|Gross Weight||48.7 lbs (22.1 Kg)|
PROS: Well made. Easy assembly and install. Great picture. Good fit and finish
CONS: High shipping cost. Bought 2nd screen from another vendor primarily due to overall lower cost. Quality & fit/finish were about 75% of Monoprice unit, but only tried the other vendor because of feeling about shipping.
The screen does what a screen should, reflects a projector with good color depth and uniform picture quality. My projector - Epson 3010 - has 3d, and the screen does everything it can to accentuate the 3d effect. It's even got the wife's interest now and she likes to watch movies downstairs now.
My advice? If you need a screen like this then check the unfortunately high shipping cost and bite the bullet. I don't think the sub-1500 dollar screens from competitors can compete with this even with the high shipping cost factored in. Also, it helps it is from monoprice and not some fly by night ebay store front. You know you are getting what the description says at a shockingly low price.
PROS: Well made, easy to put together. Good to Better Then Good "picture" quality. No hotspots, uniform screen coating (minus the small spot of grunge from factory). The velvet border is a blackhole sucking up any picture leakage like magic. Thing comes "seriously" packed to protect from damage.
CONS: Could use better mounting instructions, still don't think I have the bottom bracket latched correctly. Can see some screen texture/gain during very bright scenes but not bad at all. Had a spot on it from factory, did a quick wipe down (because I have heard you have to send the ENTIRE thing back they won't send just a part to you for replacement) and it mostly came off... think I can get it all off once I figure out the correct way to clean it without damaging the screen.
PROS: Beautiful screen.
CONS: The reason I didn't give this a 10 is due to the fact the manual does not include the proper mounting location information for the wall brackets. I purchased the 133" screen and the table only shows a 120" and a 135". I went with mounting dimensions for the 135" and it put the bottom wall bracket too low. This location didn't allow the screen to latch properly and you could see the bottom bracket below the screen. The other reason for the ding is that a call to Tech Support didn't get any answers. I was basically told there isn't a manual for that screen and the tech didn't know the product. I asked him to query other tech's in the department and came up empty handed. I had to make some assumptions and come up with my own dimension.