Volume Pricing (Log In to see Member Pricing)
Speaker Stand, Silver (SS-01), Set of 2
Many small satellite speakers have ports on the back, which are designed to improve the bass response. For best sound response, it is usually recommended to mount these speakers about 1-2 feet away from the wall, to allow the ports to work properly.
This speaker floor stand set is designed to let you mount your satellite speakers in an ideal location, away from a wall. The stands are height adjustable from about 26.8" to 43.3", allowing you to mount the speakers at your ear height when sitting. They can hold speakers weighing up to 5 lbs each.
The brackets mount onto speakers with a standard 1/4" x 20 mounting screw or via a keyhole mount. The stand tubes are hollow so that the speaker wires can be hidden within.
Questions and Answers
I hope this helps, and of course if you have any more questions feel free to contact us!
PROS: Easy setup quality construction for the price.
CONS: None noted.
PROS: Easy to assemble, will support numerous speaker makers, esp. Klipsch and Bose.
2 of the wire feed holes were so poorly drilled leftover material blocked the inner tube preventing the wires from coming through
2 of the stands middle lock collar split in half while tightening
1 lock screw jammed up halfway and broke
1 middle lock collar crimped itself to the upper stand
1 stand wouldn't lock properly and ended up tilted
3 of my 2lb speakers tipped over at the slightest instability
Wires almost stripped out of the speakers while adjusting height after hookup - wires were caught inside stand
Unless you have tiny, light speakers and don't need them more than 24" off the floor do not waste your money on these
CONS: Cheap material
PROS: These stand are very well built and look great. You can not go wrong by purchasing these stands.
CONS: One stand was a little troubling to assemble. The screw for the pole into the weight at the base was little difficult.
PROS: look as pictured and worked just fine
CONS: was missing some key pieces required for assembly, but monoprice took care of that for me.
PROS: stable, telescoping, easy assembly
CONS: none so far
PROS: Price and simplicity to assemble.
CONS: Poor instruction manual.