Volume Pricing (Log In to see Member Pricing)
MP Select 3D Printing Pen with Low Temp Safe Mode + PLA Mode
Enjoy the artistic freedom of creating free-form 3D models by hand. No need to rely on 3D models downloaded from the internet, now you can create 3D models limited only by your imagination! The MP Select 3D Printing Pen allows you to create 3D models or repair 3D models by hand. It has low-temperature and high-temperature print settings, for use with eMate and PLA filaments. It supports temperatures from 80 ~ 195°C and has eight print speed settings. It is suitable for use by children as young as 8 years old, though they should always be closely supervised by an adult.
Child Safe: The MP Select 3D Printing Pen can print eMate, a low-temperature filament that makes it safer to use by children as young as 8 years old (though children should always be closely supervised by an adult).
Variable Settings: With the ability to print at temperatures ranging from 80 ~ 195°C, the MP Select 3D printing pen is compatible with low-temperature materials, such as eMate, and higher temperature materials, such as PLA. Additionally, it supports up to eight print speeds, from 0 ~ 120 cm/minute.
Easy to Use: Power it on, load the filament of your choice, and start drawing! No other 3D printer is as quick and easy to use as the MP Select 3D Printing Pen.
Power On, Load Filament, and Draw
- Low-temperature setting for use with 1.75mm eMate filament
- Variable low-temperature settings from 80 ~ 90°C
- High-temperature setting for use with 1.75mm PLA filament
- Variable high-temperature settings from 80 ~ 195°C
- USB powered and compatible with USB power banks
- Eight speed settings from 0 ~ 120 cm/minute
- 0.7mm extrusion nozzle
- Automatic and manual extrusion modes
Monoprice not only stands behind every product we sell with a 1 year replacement warranty, we offer a 30-day money back guarantee as well! If the product you purchase does not satisfy your needs, send it back for a full refund.
Quality at a Fair Price
Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
Hassle Free Packaging
Monoprice exists to bring simplicity, fairness, and confidence to technology choices. This product features recyclable packaging that is simple to open, cost effective, with minimal waste, and fully protective as it travels to you.
Service & Support
You're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after the sale. Contact our technical support team for questions about our products, troubleshooting, or even suggestions for products to fit your particular needs. Not to be outdone, our friendly and helpful customer service team is here to make your ordering, delivery, and any possible returns a quick and painless operation, from start to finish!
|Supported Filament Types||eMate, PLA|
|Print Speeds||0 ~ 120 cm/minute|
|Working Temperature||80 ~ 195°C|
|Power Source||USB, 5 VDC, 2A|
- User's Manual (Aug 30, 2016)
Questions and Answers
BTW - Since you can't "Comment" on reviews - as a note to Jeffrey R's review where he says the PLA stays too pliable after making, I wonder if slow low temp baking would help, it's suggested by several filament makers for 3D printing ... 180° F for 2 - 3 hrs if I recall correctly. (Never tried it myself, but Google it)
1 year ago
1 year ago
1 year ago
11 months ago
8 months ago
5 months ago
3 months ago
7 months ago
5 months ago
Easy to use - kids figured everything out in less than 10 minutes and were making stuff immediately.
Works consistently and maintains temperature without getting too hot.
Easy to feed and remove material to change colored filaments.
Uses the 1.75MM 1kg spools (we clip off about 2' lengths at time).
The instruction booklet was tiny but the PDF was online.
> We remove the filament before the end of the material goes into the pen so we can pull out the entire piece to ensure it doesn't get clogged inside.
> We always use same thickness and temperature filaments in one session to avoid clogging (the sample material that comes with the pen is lower temperature than the 1.75MM spool material and it clogged briefly when we switched from one to the other).
Totally happy with the purchase.
2 months ago