Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Gold
    Product # 12297
    Color: Gold
    In Stock This item should ship tomorrow (9/21/2017) if ordered within 22 hours 57 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $19.99
    Qty: 2-9 $19.75
    Qty: 10-19 $19.50
    Qty: 20-49 $19.25
    Qty: 50+ $18.99

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Gold

    Get outstanding 3D printing results when you use 1.75mm ABS 3D Printer Filament from Monoprice!

    ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending.

    This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 230° C (446°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament.

    The negatives of using ABS is that it can give off a white smoke with a concentrated odor. It is best to ensure that the printing room is well ventilated when using ABS.

    Additionally, it has a high moisture absorption rate. Depending on the overall humidity level of the printing environment, an opened spool can absorb enough moisture after a couple of days that high temperature printing could cause bubbles or pocks in the extrusion. It is therefore recommended to not open a spool until you are ready to print and to store any unused portion with with silca gel and/or an active dehumidifier to reduce the amount of moisture it can absorb.

    Reel Dimensions:

    • Reel Diameter: 195mm (7.68")
    • Hub Diameter: 95mm (3.74")
    • Spindle Diameter: 38mm (1.50")
    • Reel Width: 80mm (3.15")
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 1 question Browse 1 question and 2 answers
    No questions have been asked about this item. Be the first!
    3.5 / 5.0
    52 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Stars
    I hope they never stop making the gold and crystal clear
    This is my second spool of the Gold ABS and I am using the Monprice Dual 3D Printer (Discontinued). There is something different about this Gold and Crystal Clear ABS. At first this stuff was frustrating and horrible, but ultimately led me to correct all the problems with my printer (over extrusion, bad heat bed settings, etc.). The cool thing about this and Crystal Clear ABS is that I can print full height on glass with just hairspray, 60C Heat Bed, and 240C extruders with no warping or cracking! I can verify that it does dissolve in Acetone and will behave as expected in a Acetone vapor bath. I would give it a higher rating, but both spools I received were wound too tight and unevenly causing snags. Also the color would be more accurately described as butterscotch IMO.
    November 21, 2016
    10 months ago

    Related Categories

    In Stock This item should ship tomorrow (9/21/2017) if ordered within 22 hours 57 minutes
    Tax and shipping will be calculated at checkout