Volume Pricing (Log In to see Member Pricing)
Ironlink Cisco GLC-T Compatible 1000Base-T Copper SFP (mini-GBIC) Module
- SFP (mini-GBIC) transceiver module
- Up to 1.25 GBd bi-directional data links
- Compliant with IEEE 802.3z, IEEE 802.3u, IEEE 802.3ab compliant
- Compliant with SFP MSA Hot-pluggable SFP footprint
- Support 1000BASE-T full duplex default operating mode
- Support 10/100/1000BASE-T operation in host systems with SGMII interface
- RJ-45 connector
- Auto-sense MDI/MDIX Single power supply 3.3V RoHS Compliance
- Operating temperature range: 0 ~ 70°C
Ironlink transceivers are built to meet or exceed the OEM's specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, are guaranteed compatible, and carry a Lifetime Replacement Warranty.
Ironlink's industry-standard SFP is a hot-swappable input/output device that plugs into a Gigabit Ethernet slot, linking the port with the fiber-optic network. Ironlink transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant for all networking product lines, and are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance.
PID 13157 (GLC-T) is a Cisco compatible SFP module with following features: 1000BASE-T, RJ45 Connector, Copper, up to 100 meter reach (distance).
|Data Rate1||10/100/1000 Mbps (IEEE 802.3)|
|Maximum Cable Length||up to 100 meters using Cat5 UTP|
|Bit Error Rate||10-12|
|Operating Temperature||+32 ~ +158°F (0 ~ +70°C)|
|Storage Temperature||-40 ~ +185°F (-40 ~ +85°C)|
|Supply Current||320 ~ 375 mA|
|Input Voltage||3.13 ~ 3.47 V (3.3V typical)|
|Differential Input Voltage||250 ~ 1200 mV (differential peak-peak)|
|Differential Output Voltage||350 ~ 800 mV (differential peak-peak)|
|Rise/Fall Time (20% - 80%)||175 psec|
|Tx Input Impedance||50 ohms (single ended)|
|Rx Output Impedance||50 ohms (single ended)|
|Line Frequency||125MHz (5-level encoding)|
|Tx Output Impedance - Differential2||100 ohms|
|Rx Input Impedance - Differential2||100 ohms|
|SFP Output Low3||0 ~ 0.5 V|
|SFP Output High3||Host_VCC–0.5 ~ Host_VCC+0.3 V|
|SFP Input Low3||0 ~ 0.8 V|
|SFP Input High3||2 ~ VCC+0.3 V|
1 10/100/1000M operation requires the host system to have an SGMII interface with no clock. With a SERDES interface, this transceiver will operate at 1000M only.
2 For all frequencies between 1MHz and 125MHz.
3 External 4.7-10k ohm pull-up resistor required.
- Specification Sheet (Dec 17, 2013)