What range of panel thicknesses will this work with? I'm going to be using this in a commercial cabinet and need to know how thick the panel can be. I also need to have a drawing showing the cutout dimensions.
I had to figure out the procedure to terminate the cable onto the jack. It would be helpful if there were an instruction sheet. They worked okay. A little tough to set it into the thet wo hole face plate but easy to set into the 1 port surface mount housing.
Does not fit with 3 or 6 holes wall plates for keystones.
Installed about 20, easy enough to install, just wanted to let people know that these will not work with monoprice wall plate for keystones that have 3 or 6 holes due to the fact that these keystones are bulky and there is not enough space between each hole. Works fine with 1,2 or 4 hole plates.
I purchased about 40 of these for an install. The keystones were very easy to assemble. All I needed were wire strippers and cutters. All in all, it took me about 2-3 minutes to put together each jack. The jacks sit very flush with different wall plates I purchased from other sources. I ran cable tests and everything checked out. No intermittent connection issues. For the price, this beats out other jacks I've looked at.
My only complaint is that sometimes the keystones close up while they're still in the bag, so I essentially had to open them up again. The latches are pretty fragile even when using small flat-head screwdrivers. I accidentally broke one when trying to do this. As long as I was gentle and careful, it was easy to open them up.