Monoprice Cat6 Punch Down Keystone Jack for 22-24AWG Solid Wire, White
Product # 5384
UPC # 844660053842
$1.69
*Affirm is not available for business or international orders
Qty: 1
$1.69
Qty: 2-9
$1.59
Qty: 10-19
$1.49
Qty: 20-49
$1.39
Qty: 50+
$1.29
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 78 questions
Browse 78 questions
and 110 answers
is a punch down tool included?
A shopper
on Apr 3, 2018
BEST ANSWER: No, you would need to buy that separately. This is just for the punch down jack.
- Reply
- Inaccurate
- Vishal P on Apr 3, 2018
- Purchased on Apr 18, 2017
BEST ANSWER: No, you would need to buy that separately. This is just for the punch down jack.
- Reply
- Inaccurate
- Vishal P on Apr 3, 2018
- Purchased on Apr 18, 2017
Yes a cheap disposable one normally comes with the keystone jacks.
- Reply
- Inaccurate
- James R on Apr 5, 2018
- Purchased on Apr 13, 2017
No. You need to purchase your own punch down tool.
- Reply
- Inaccurate
- John M on Apr 25, 2018
- Purchased on Mar 18, 2018
No. You will need your own punchdiw tool
- Reply
- Inaccurate
- heather d on Apr 3, 2018
- Purchased on Apr 8, 2017
No, you have to order that separately.
- Reply
- Inaccurate
- dave b on Apr 3, 2018
- Purchased on Mar 22, 2018
Vote for the best answer above!
How is this really any different to a cat5e jack - both cat 5 & 6 have the same pin-out?
Michael M
on Dec 13, 2016
BEST ANSWER: cat5, cat5e, and cat6 are all different standards with different wire gages, insulation material and cat6 has a riser spine in all versions. A cat6 jack can be used with 5 or 5e but in general they are meant for cat6 wire. thicker terminals for thicker wire so the wires may not stay terminated properly if there is a lot of movement. In my home I have some cat6 ports terminating cat5e wiring but it is used only because it's what I had on hand, in a place that isn't used often.
if you can, use cat6 wire, terminals and ends. it is much better than 5e in the long term.
if you can, use cat6 wire, terminals and ends. it is much better than 5e in the long term.
- Reply
- Inaccurate
- David E on Dec 13, 2016
- Purchased on May 1, 2016
BEST ANSWER: cat5, cat5e, and cat6 are all different standards with different wire gages, insulation material and cat6 has a riser spine in all versions. A cat6 jack can be used with 5 or 5e but in general they are meant for cat6 wire. thicker terminals for thicker wire so the wires may not stay terminated properly if there is a lot of movement. In my home I have some cat6 ports terminating cat5e wiring but it is used only because it's what I had on hand, in a place that isn't used often.
if you can, use cat6 wire, terminals and ends. it is much better than 5e in the long term.
if you can, use cat6 wire, terminals and ends. it is much better than 5e in the long term.
- Reply
- Inaccurate
- David E on Dec 13, 2016
- Purchased on May 1, 2016
The cables are what makes the difference. A cat5e cable is a gigabit cable, but a cat6 carries gigabit over longer distance than a 5e. If you use the same config of wires punched in, on both ends of the wire, you are good.
- Reply
- Inaccurate
- Sivaraman V on Mar 26, 2017
- Purchased on Feb 17, 2017
Its different because of the cable that is hooked up to it. Cat 6 has a faster speed then cat 5.
- Reply
- Inaccurate
- Edward A on Dec 13, 2016
- Purchased on May 5, 2016
I agree use Cat 6 wire as it will carry higher signal when demand with 4k content goes up
- Reply
- Inaccurate
- Ironnerve on Jan 3, 2017
- Purchased on Nov 21, 2016
Yes they hsvf the same pin -out.
- Reply
- Inaccurate
- Robert N on Dec 13, 2016
- Purchased on May 6, 2016
Vote for the best answer above!
Will keystone jack work with these wall plages and this cable? https://www.monoprice.com/product?c_id=102&cp_id=10234&cs_id=1023404&p_id=13563&seq=1&format=2 ? I am pretty sure they will, but just want to be sure.
New User U
on Oct 22, 2018
Monoprice Cat6 Punch Down Keystone Jack for 22-24AWG Solid Wire, White
Monoprice 1-Gang Wall Plate for Keystone, 1-Port, White, 4.5"x2.75"x0.2", w/Screws (White Coated Screw Head)
Monoprice 1-Gang Wall Plate for Keystone, 2-Port, White, 4.5"x2.75"x0.2", w/Screws (White Coated Screw Head)
BEST ANSWER: The cable, jack and wall plate(s) will all play together nicely. One thing to note. This particular jack does not provide a ground tongue. So, if you use the shielded CAT6 cable you will not be able to terminate the ground lead onto this jack. You will need a CAT6 jack that supports shielding/grounding. If you don't care about connecting the ground - then you're good to go.
- Reply
- Inaccurate
- Leonard M on Oct 24, 2018
- Purchased on Oct 23, 2017
BEST ANSWER: The cable, jack and wall plate(s) will all play together nicely. One thing to note. This particular jack does not provide a ground tongue. So, if you use the shielded CAT6 cable you will not be able to terminate the ground lead onto this jack. You will need a CAT6 jack that supports shielding/grounding. If you don't care about connecting the ground - then you're good to go.
- Reply
- Inaccurate
- Leonard M on Oct 24, 2018
- Purchased on Oct 23, 2017
Yes it will. I use them all the time.
- Reply
- Inaccurate
- Martin G on Oct 22, 2018
- Purchased on Jul 7, 2016
Yes, those will all work together.
- Reply
- Inaccurate
- Bryan P on Oct 22, 2018
- Purchased on Nov 6, 2017
Vote for the best answer above!
Does this Punch Down Jack work fine with Solid Ethernet cables or just stranded?
Mohammad M
on Feb 23, 2017
BEST ANSWER: Actually, I have never seen a jack for stranded. They make crimp on ends for stranded, but inside the wall cabling and terminations are always solid. If you must use stranded cable in the wall, look for a pass through plate or one that the RJ45 end clips in on the back and front.
- Reply
- Inaccurate
- Timothy C on Feb 24, 2017
- Purchased on May 10, 2016
BEST ANSWER: Actually, I have never seen a jack for stranded. They make crimp on ends for stranded, but inside the wall cabling and terminations are always solid. If you must use stranded cable in the wall, look for a pass through plate or one that the RJ45 end clips in on the back and front.
- Reply
- Inaccurate
- Timothy C on Feb 24, 2017
- Purchased on May 10, 2016
I only use the solid cable and it works great just wish they made a crimp for this jack like they have for others
- Reply
- Inaccurate
- Scott on Feb 24, 2017
- Purchased on May 16, 2016
cat.6 cables are by definition solid 24awg copper. you would not use this with any stranded wire.
- Reply
- Inaccurate
- David E on Feb 23, 2017
- Purchased on May 1, 2016
Vote for the best answer above!
Is the CAT6 label on the front really blue?
A shopper
on Dec 23, 2017
BEST ANSWER: Mine are a couple years old, so take the answer for what it's worth, but no, mine are not.
- Reply
- Inaccurate
- Daniel H on Dec 23, 2017
- Purchased on Dec 27, 2016
BEST ANSWER: Mine are a couple years old, so take the answer for what it's worth, but no, mine are not.
- Reply
- Inaccurate
- Daniel H on Dec 23, 2017
- Purchased on Dec 27, 2016
Yes, but it's printed letters not a label.
- Reply
- Inaccurate
- Ves B on Dec 23, 2017
- Purchased on Jan 6, 2017
Vote for the best answer above!
Can a RJ11 cable plug into this keystone?
A shopper
on Jan 17, 2020
BEST ANSWER: Yes, it can. RJ11 connectors are smaller in size than the RJ45 ones from ethernet patch cords. You'll be fine. Good luck!
- Reply
- Inaccurate
- Carlos H on Jan 17, 2020
- Purchased on Feb 1, 2019
BEST ANSWER: Yes, it can. RJ11 connectors are smaller in size than the RJ45 ones from ethernet patch cords. You'll be fine. Good luck!
- Reply
- Inaccurate
- Carlos H on Jan 17, 2020
- Purchased on Feb 1, 2019
Yes, works perfectly with standard phone line as long as voice is what is being sent over the line from the source.
- Reply
- Inaccurate
- Roger K on Jan 17, 2020
- Purchased on Jan 28, 2019
NO. A RJ11 is a smaller connector with less contacts with in the it. RJ11 is typically for analog phone lines.
- Reply
- Inaccurate
- Shawn C on Jan 17, 2020
- Purchased on Jan 22, 2019
Vote for the best answer above!
Is white one white, or does it have yellowish cast (almond/ivory)?
New User U
on Jun 7, 2020
BEST ANSWER: They are bright white.
- Reply
- Inaccurate
- Charles D on Jun 7, 2020
- Purchased on Jun 14, 2019
BEST ANSWER: They are bright white.
- Reply
- Inaccurate
- Charles D on Jun 7, 2020
- Purchased on Jun 14, 2019
They are white white. No yellowing in them.
- Reply
- Inaccurate
- Lonnie M on Jun 7, 2020
- Purchased on May 16, 2019
Vote for the best answer above!
Does the "white" color of this keystone jack match the same shade of white as Product # 6727? The image for this keystone jack looks more ivory than white.
John K
on Dec 31, 2017
Monoprice Cat6 Punch Down Keystone Jack for 22-24AWG Solid Wire, White
Monoprice 1-Gang Wall Plate for Keystone, 2-Port, White, 4.5"x2.75"x0.2", w/Screws (White Coated Screw Head)
BEST ANSWER: They do match up very well. It is probably just the lighting of the picture that makes them look different. Have used this combination of plate and jack many times over the last couple years. You'll really like them.
- Reply
- Inaccurate
- Garrett S on Dec 31, 2017
- Purchased on Jan 19, 2017
BEST ANSWER: They do match up very well. It is probably just the lighting of the picture that makes them look different. Have used this combination of plate and jack many times over the last couple years. You'll really like them.
- Reply
- Inaccurate
- Garrett S on Dec 31, 2017
- Purchased on Jan 19, 2017
Vote for the best answer above!
Will this work with a 23AWG wire?
New User U
on Nov 15, 2020
BEST ANSWER: Yes these will work fine. I have used these in conjunction with MP’s CAT 6 solid core wire and have never had any issues.
- Reply
- Inaccurate
- justin b on Nov 15, 2020
- Purchased on Dec 13, 2019
BEST ANSWER: Yes these will work fine. I have used these in conjunction with MP’s CAT 6 solid core wire and have never had any issues.
- Reply
- Inaccurate
- justin b on Nov 15, 2020
- Purchased on Dec 13, 2019
Yes. I installed these jacks with 23AWG solid wire Cat6 cables.
- Reply
- Inaccurate
- M A on Nov 15, 2020
- Purchased on Dec 16, 2019
Yes sir Enter an answer to this question.
- Reply
- Inaccurate
- Ayad N on Nov 15, 2020
- Purchased on Dec 21, 2018
Vote for the best answer above!
can this handle poe?
Matthew R
on Oct 16, 2022
BEST ANSWER: Any punchdown can handle POE that I know of. As the cable nor the connector would heat up with the current supplied.
- Reply
- Inaccurate
- Ben V on Oct 18, 2022
- Purchased on Oct 18, 2021
BEST ANSWER: Any punchdown can handle POE that I know of. As the cable nor the connector would heat up with the current supplied.
- Reply
- Inaccurate
- Ben V on Oct 18, 2022
- Purchased on Oct 18, 2021
Yes I believe so. POE so low power that the limitation would much more likely be on the wire side
- Reply
- Inaccurate
- Ethan K on Oct 18, 2022
- Purchased on Oct 22, 2021
Vote for the best answer above!
I bought the FLEXboot Series Cat6 24AWG UTP Ethernet Network Patch Cable. I ran through the wall and want to hook up to a Cat6 Punch Down Keystone Jack. would i cut it just like cutting strip it and use a punch down tool the same as when using a spool of ethernet?
Jordan D
on Jun 12, 2017
Monoprice Cat6 Punch Down Keystone Jack for 22-24AWG Solid Wire, White
Monoprice Cat6 50ft Blue Patch Cable, UTP, 24AWG, 550MHz, Pure Bare Copper, Snagless RJ45, Flexboot Series Ethernet Cable
BEST ANSWER: Yes/ however you may want to invest in a 1000' spool of solid copper twisted non stranded for ease of installation. I would not cut these very nice molded ends off.
I leave ablot 4-7' hanging out the hole in the face plate and do not cuts the ends.
I leave ablot 4-7' hanging out the hole in the face plate and do not cuts the ends.
- Reply
- Inaccurate
- etp77 on Dec 21, 2018
BEST ANSWER: Yes/ however you may want to invest in a 1000' spool of solid copper twisted non stranded for ease of installation. I would not cut these very nice molded ends off.
I leave ablot 4-7' hanging out the hole in the face plate and do not cuts the ends.
I leave ablot 4-7' hanging out the hole in the face plate and do not cuts the ends.
- Reply
- Inaccurate
- etp77 on Dec 21, 2018
There is no difference in the cable than what's on a spool, just factory terminated instead of on a spool. Patch away.
- Reply
- Inaccurate
- Andrea B on Jun 20, 2017
Vote for the best answer above!
Can you use these with cat 6a cable?
Randy L
on Jul 14, 2021
BEST ANSWER: Yes - should be fine
- Reply
- Inaccurate
- Steven R on Jul 22, 2021
- Purchased on Aug 4, 2020
BEST ANSWER: Yes - should be fine
- Reply
- Inaccurate
- Steven R on Jul 22, 2021
- Purchased on Aug 4, 2020
Vote for the best answer above!
does it fit AWG 23 or AWG24?
A shopper
on Jan 27, 2022
BEST ANSWER: That is the normal size for a CAT 6 cable. Yes it will work. I installed this connector to all bedrooms and used the punch down tool.
Highly recommend purchase of the punch down tool. It simply works very well and makes the job fast, easy and ensure a quality connection.
Others have tried many different short cuts like screw drivers. This tool makes it a professional quality install.
These connectors are easy to use. Make a dry fit on first cable trim out of insulation and fit it for a final install. Once satisfied use the punch down tool and proceed.
Hope this helps.
Highly recommend purchase of the punch down tool. It simply works very well and makes the job fast, easy and ensure a quality connection.
Others have tried many different short cuts like screw drivers. This tool makes it a professional quality install.
These connectors are easy to use. Make a dry fit on first cable trim out of insulation and fit it for a final install. Once satisfied use the punch down tool and proceed.
Hope this helps.
- Reply
- Inaccurate
- Ringsteel on Jan 28, 2022
- Purchased on Feb 8, 2021
BEST ANSWER: That is the normal size for a CAT 6 cable. Yes it will work. I installed this connector to all bedrooms and used the punch down tool.
Highly recommend purchase of the punch down tool. It simply works very well and makes the job fast, easy and ensure a quality connection.
Others have tried many different short cuts like screw drivers. This tool makes it a professional quality install.
These connectors are easy to use. Make a dry fit on first cable trim out of insulation and fit it for a final install. Once satisfied use the punch down tool and proceed.
Hope this helps.
Highly recommend purchase of the punch down tool. It simply works very well and makes the job fast, easy and ensure a quality connection.
Others have tried many different short cuts like screw drivers. This tool makes it a professional quality install.
These connectors are easy to use. Make a dry fit on first cable trim out of insulation and fit it for a final install. Once satisfied use the punch down tool and proceed.
Hope this helps.
- Reply
- Inaccurate
- Ringsteel on Jan 28, 2022
- Purchased on Feb 8, 2021
It works for both wire gauges, solid and strand.
- Reply
- Inaccurate
- Peter H on Jan 29, 2022
- Purchased on Feb 5, 2021
Vote for the best answer above!
Do these support 10 gigabit over Cat6A?
Gary L
on Dec 5, 2016
BEST ANSWER: Hello, since this is a simple passthrough it should support 10 gigabit accordingly. Just make sure the rest of your setup supports those speeds and it should work properly. I hope this helps and thank you for your question
- Reply
- Inaccurate
- Jericho L Staff on Dec 8, 2016
BEST ANSWER: Hello, since this is a simple passthrough it should support 10 gigabit accordingly. Just make sure the rest of your setup supports those speeds and it should work properly. I hope this helps and thank you for your question
- Reply
- Inaccurate
- Jericho L Staff on Dec 8, 2016
Vote for the best answer above!
Can you explain the two rows (A and B) of colored pinouts on the keystone? I'm primary concerned about the side with orange, orange-white, green, and green-white as their pinouts are different depending on the row. Which one should I use to run a Cat5e cable through a wall and then use keystones in wallplates--the A or B row? Is one row for a cross-over and the other row for a pass-through? Thanks
Kent C
on Jul 21, 2018
BEST ANSWER: Thank you for your question.
The B would be for the pass-through A is for crossover.
The B would be for the pass-through A is for crossover.
- Reply
- Inaccurate
- Tyler C Staff on May 2, 2019
BEST ANSWER: Thank you for your question.
The B would be for the pass-through A is for crossover.
The B would be for the pass-through A is for crossover.
- Reply
- Inaccurate
- Tyler C Staff on May 2, 2019
Vote for the best answer above!
Does this jack support 24 awg wire?
Nathan W
on Jan 7, 2019
BEST ANSWER: Thank you for your question.
This would support 24 AWG wire.
This would support 24 AWG wire.
- Reply
- Inaccurate
- Tyler C Staff on Aug 16, 2019
BEST ANSWER: Thank you for your question.
This would support 24 AWG wire.
This would support 24 AWG wire.
- Reply
- Inaccurate
- Tyler C Staff on Aug 16, 2019
Vote for the best answer above!
Will these work with the Leviton Faceplates?
Peter R
on Apr 18, 2019
BEST ANSWER: Thank you for your question.
We have only tested these with our wall plates but that are too large to fit side by side so I would recommend using #15695 instead.
We have only tested these with our wall plates but that are too large to fit side by side so I would recommend using #15695 instead.
- Reply
- Inaccurate
- Tyler C Staff on May 30, 2019
Monoprice Cat6 Punch Down Short Body 180-Degree Keystone Jack for 22-24AWG Solid Wire, White
BEST ANSWER: Thank you for your question.
We have only tested these with our wall plates but that are too large to fit side by side so I would recommend using #15695 instead.
We have only tested these with our wall plates but that are too large to fit side by side so I would recommend using #15695 instead.
- Reply
- Inaccurate
- Tyler C Staff on May 30, 2019
Monoprice Cat6 Punch Down Short Body 180-Degree Keystone Jack for 22-24AWG Solid Wire, White
Vote for the best answer above!
Will I be able to fill up all 6 keystones in the 6 keystones wall plate I need to use? Or will these not fit together?
Guadalupe B
on Mar 14, 2020
BEST ANSWER: Thank you for your question.
You would want to use the keystones found under #15679.
You would want to use the keystones found under #15679.
- Reply
- Inaccurate
- Tyler C Staff on Mar 16, 2020
Monoprice Cat6A RJ45 Toolless 180-Degree Short Body Keystone Jack for 22-24AWG Solid Wire, White
BEST ANSWER: Thank you for your question.
You would want to use the keystones found under #15679.
You would want to use the keystones found under #15679.
- Reply
- Inaccurate
- Tyler C Staff on Mar 16, 2020
Monoprice Cat6A RJ45 Toolless 180-Degree Short Body Keystone Jack for 22-24AWG Solid Wire, White
Vote for the best answer above!
Vote for the best answer above!
Will the white 5384 jacks work with patch panel 7260 side by side?
Lance S
on Jul 23, 2020
Monoprice Cat6 Punch Down Keystone Jack for 22-24AWG Solid Wire, White
Monoprice 24-port Keystone Jack Panel
BEST ANSWER: Yes. We use these together all the time.
- Reply
- Inaccurate
- Tyler D on May 25, 2023
- Purchased on May 30, 2022
BEST ANSWER: Yes. We use these together all the time.
- Reply
- Inaccurate
- Tyler D on May 25, 2023
- Purchased on May 30, 2022
Vote for the best answer above!
Are these keystone gigabit rated?
New User U
on Oct 19, 2020
BEST ANSWER: yes they are, ive used then in my house and have never had any problems at all
- Reply
- Inaccurate
- Blake T on Nov 21, 2021
- Purchased on Oct 17, 2021
BEST ANSWER: yes they are, ive used then in my house and have never had any problems at all
- Reply
- Inaccurate
- Blake T on Nov 21, 2021
- Purchased on Oct 17, 2021
Vote for the best answer above!
Will this work with Cat6A bulk network cable? Or should I get a Cat6A keystone jack? The reason I ask is I don't see a Cat6A punch down keystone jack, and I prefer the punch down keystone jacks to the toolless keystone jacks.
Ryan B
on Nov 1, 2020
BEST ANSWER: I used two of these to run Cat6A cable for a 15' hidden Ethernet connection. Used two of these (1 at each end) along with 2 double female HDMI keystone connectors. Worked well. I too prefer a punch down connector. It was important to cut back the plastic splitter in the cable to makes it for smoothly.
- Reply
- Inaccurate
- Power User on Nov 1, 2020
- Purchased on Nov 22, 2019
BEST ANSWER: I used two of these to run Cat6A cable for a 15' hidden Ethernet connection. Used two of these (1 at each end) along with 2 double female HDMI keystone connectors. Worked well. I too prefer a punch down connector. It was important to cut back the plastic splitter in the cable to makes it for smoothly.
- Reply
- Inaccurate
- Power User on Nov 1, 2020
- Purchased on Nov 22, 2019
Vote for the best answer above!
Will these really not fit side by side in a four jack plate like this? https://www.monoprice.com/product?p_id=6731 Is there a keystone jack that will fit? We really need them in 4 jack plates.
Kent O
on May 10, 2021
Monoprice Cat6 Punch Down Keystone Jack for 22-24AWG Solid Wire, White
Monoprice 1-Gang Wall Plate for Keystone, 4-Port, White, 4.5"x2.75"x0.2", w/Screws (White Coated Screw Head)
BEST ANSWER: I used the short body punch down keystones (ID #15695) with the 4 jack plates (ID #6731). They worked well for me.
- Reply
- Inaccurate
- Elizabeth W on May 21, 2021
BEST ANSWER: I used the short body punch down keystones (ID #15695) with the 4 jack plates (ID #6731). They worked well for me.
- Reply
- Inaccurate
- Elizabeth W on May 21, 2021
Vote for the best answer above!
I am having a hard time know what color of wires to use and place on this punch down jack. The linked PDF instructions is not for this jack. I just want to set a T568A wiring. What do the numbers indicate? I am colorblind.
Brady C
on Jun 10, 2021
BEST ANSWER: A standard TIA 568 A wiring scheme is pin 1 - green/white; pin 2 - green; pin 3 - orange/white; pin 4 - blue; pin 5 - blue/white; pin 6 - orange; pin 7 - brown/white; pin 8 - brown. The numbers on the jack should coordinate to that, as well as the color code on the jack. Although if you are color blind you may need assistance in termination regardless as the wire will need to be routed based on color.
- Reply
- Inaccurate
- Beau S on Sep 15, 2023
- Purchased on Feb 14, 2023
BEST ANSWER: A standard TIA 568 A wiring scheme is pin 1 - green/white; pin 2 - green; pin 3 - orange/white; pin 4 - blue; pin 5 - blue/white; pin 6 - orange; pin 7 - brown/white; pin 8 - brown. The numbers on the jack should coordinate to that, as well as the color code on the jack. Although if you are color blind you may need assistance in termination regardless as the wire will need to be routed based on color.
- Reply
- Inaccurate
- Beau S on Sep 15, 2023
- Purchased on Feb 14, 2023
Vote for the best answer above!
Can you Connect two Ethernet cables to one keystone?
Michael A
on Aug 2, 2022
BEST ANSWER: Not quite sure I understand your question. If you're asking if you can punch two Ethernet cables into the back side, I wouldn't think you could to potential interference and I just don't think it would actually work. As to connecting an ethernet on the front side, there is only one female receptacle so I think the answer is also no.
- Reply
- Inaccurate
- LS on Aug 9, 2022
- Purchased on Aug 26, 2021
BEST ANSWER: Not quite sure I understand your question. If you're asking if you can punch two Ethernet cables into the back side, I wouldn't think you could to potential interference and I just don't think it would actually work. As to connecting an ethernet on the front side, there is only one female receptacle so I think the answer is also no.
- Reply
- Inaccurate
- LS on Aug 9, 2022
- Purchased on Aug 26, 2021
Vote for the best answer above!
Are your jacks Leviton compatible for tools? Or straight punch?
A shopper
on Sep 15, 2023
BEST ANSWER: If you are asking if Leviton tools will work on this as far as 110 punch down tools then yes. This is a standard IDC (insulation displacement connector) and any brand punch tool will work with a 110 cut blade.
- Reply
- Inaccurate
- Beau S on Sep 15, 2023
- Purchased on Feb 15, 2022
BEST ANSWER: If you are asking if Leviton tools will work on this as far as 110 punch down tools then yes. This is a standard IDC (insulation displacement connector) and any brand punch tool will work with a 110 cut blade.
- Reply
- Inaccurate
- Beau S on Sep 15, 2023
- Purchased on Feb 15, 2022
Vote for the best answer above!
Does the white color match the leviton decora keystone plate color? Leviton/Home Depot Part number 41643-W.
A shopper
on Jan 10, 2018
Does anyone know if this works with the Jackrapid system from Fluke, and if so, what head do I use?
Paul S
on Nov 15, 2018
what awg wire do these jacks support (23/22)?
I am specifically planning a Cta6 22awg CMP implementation.
I am specifically planning a Cta6 22awg CMP implementation.
Jonathan O
on Mar 27, 2020
Can I use this Cat6 keystone connector with Cat6a cable? I'm probably overdoing my home network using Cat 6a, and understand the home network is only as fast as the weakest part. I know both are capable of 10GBPS, but that Cat6a has a larger range. I have read conflicting information on the web about this, with some information indicating that there is no difference between Cat6 and Cat6a connectors.
Richard P
on May 19, 2020
Reviews
4.7 / 5.0
635 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
528
60
19
7
21
Rated 3 out of 5
Look fine, mispicked order
Ordered 10, they sent 9
- Was this review helpful? Yes (0) No (5)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (5)
- Flag as Inappropriate
Rated 5 out of 5
Works well
I like having the option for many colors. I used these first for proving the concept for my networking work. I would use these again in the future
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Works well
Installed wire with 110 punch tool. Need to aim tool carefully for it to cut right, as the cutting shoulder is shallow. These work with no problems.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Rated 5 out of 5
Don' overthink it.
Been three decades since my last Network class. Used internet to find wiring scheme.
There seems to be a few different layouts that the pros will recognize know what is what. Me a home owner not so much.
So what works best is this: Simply follow the color code for this connector and it will work.
Installed fiver per the connector scheme and plugged in to router.
All systems worked first time no issues.
There seems to be a few different layouts that the pros will recognize know what is what. Me a home owner not so much.
So what works best is this: Simply follow the color code for this connector and it will work.
Installed fiver per the connector scheme and plugged in to router.
All systems worked first time no issues.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Thank you Mono for making this now an industry standard size.
I thank the reviewers that posted pictures of the new style jack.
These will now fit in a 4 or 6 port Decora style keystone insert(device), which is widely used on most residential jobs. Construction of the jack is superb. I go through hundreds of these per month and other brands cost twice to 3 times as much, Leviton, Wirepath, or similar industry brands. I've recently ordered my first 100 jacks and will continue to use this new model. Tip for some Pros, this jack will fit on the Wirepath keystone crimp tool that does all pairs at once, by filing down the base rails slightly.
These will now fit in a 4 or 6 port Decora style keystone insert(device), which is widely used on most residential jobs. Construction of the jack is superb. I go through hundreds of these per month and other brands cost twice to 3 times as much, Leviton, Wirepath, or similar industry brands. I've recently ordered my first 100 jacks and will continue to use this new model. Tip for some Pros, this jack will fit on the Wirepath keystone crimp tool that does all pairs at once, by filing down the base rails slightly.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Rated 1 out of 5
new ones worst than old
Used thousands of these Please go back to old style or offer at increased price.
- Was this review helpful? Yes (4) No (9)
- Flag as Inappropriate
June 4, 2021
- Was this review helpful? Yes (4) No (9)
- Flag as Inappropriate
Rated 3 out of 5
BEWARE - THEY CHANGED THE PUNCH LAYOUT
Received my order 2 June 2021 and the keystones are bagged with the correct item number, but the punch layout of the keystones is totally different from what they've shipped before and different from what is pictured. If you're expecting the arrangement like is inpicture - that they've used forever -you're going to be disappointed.
- Was this review helpful? Yes (19) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (19) No (0)
- Flag as Inappropriate
Rated 5 out of 5
As a novice definitely worth it
I bought a bunch of these thinking they would only be used in wall plates. After getting the Klein tool passthrough RJ45 modular plugs and having a few fail on me I ordered more to use these and then run the 1/2 or 1 foot cables from this to the switch. Premade cables are so cheap compared to the frustration of terminating the ethernet to an RJ45 for someone like myself.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 4 out of 5
Worked well, but not as shown.
These worked but are different than shown. No strain relief built in and they are so tight that I couldn't use my punch down tool. I managed to get them installed with little fuss though and they seem to be working.
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate